HP Mini 110-3130NR and the new hard drive - how to create an image and use it?

I want to replace the current hard drive to my HP Mini 110-3130NR of a new SSD.

Ideally, I'd like to copy the disc hard integer on the SSD and then just swap hard disks (create a picture of the current hard drive work in the SSD).

Otherwise, I have an external USB hard drive, so I could save the contents of the original hard drive and restore the image in the SSD. The problem is that HP Mini doesn't have a DVD player/burner, and I fear that it does not start via a USB device.

Any help is welcome. Thank you.

Respect!

OK, all these programs did not help ast all, they still have some problems with SSDS (I tried an Intel X 25-M SSDSA2MH080G2K5 and an OCZ Vertex 2 OCZSSD2-2VTXE120G).

This is so the fix for the problem, all you need a 4 GB flash drive.

In Windows XP, Vista or seven plug the flash drive into the computer, open a command window (type cmd in the search) and type:

DiskPart

In the window that opened type:

list disk

Find the number corresponding to your USB key and type the following commands, replacing X with the number corresponding to your flash drive:

Select disk X
clean
create the primary partition
Select partition 1
assets
format fs = NTFS
Assign
output

Then insert a DVD Windows Seven of INTAL, open the command prompt and navigate to the "Startup" folder in the Windows 7 DVD.
Starting inside this folder, run the command:

Bootsect/nt60 W: - replacing the W with the letter assigned to your flash drive.

After that, simply copy the entire contents of the Windows 7 Installation DVD to flash drive, drive to the computer with the newly installed SSD and start from the flahs player.

Enjoy!

Someone click on the bottom "accept as a Solution.

Respect!

Tags: Notebooks

Similar Questions

  • Install the new hard drive - how to proceed?

    My hard drive has bad sectors which (according to Spinrite) is not repairable.  I also ran all the HP utilities who tell me that the hard drive needs to be replaced.  So, I bought a new one that is the same size and the brand as what exists currently in my laptop.

    Laptop is HDX16 that came with Vista.  I upgraded to Win7 before realizing that my Imaging backups were a failure due to bad sectors.  The last good picture I have with Shadow Protect is the system with Vista and is now 3 weeks old.  Meanwhile, I use Norton Security backup feature to back up all my files on a daily basis.   I noticed yesterday that Win7 has a built-in backup feature imagery so decided to see if she would complete successfully and he did.  So now, I have a picture of the Win7 installation as well.

    I did system recovery disks for my laptop.  If I read information of HP correctly, when I run the restore, it will automatically create the partitions C & D on the new drive, install the recovery disk D environment and continues to run since that installation of Vista hard disk?  If so, once the operating system is running on the hard drive again, I think I can then move to Win7 yet and then use the recovery feature to copy the image, I made yesterday to the laptop.  Is this correct?  Am I missing something?

    Otherwise, my other option would be to run the recovery discs, then use the Shadow protect recovery disks to copy the old image of 3 weeks, then switch to Win7 again and somehow find all the files I have created/changed over the last 3 weeks I want to keep and they copy to the laptop?

    Any suggestions appreciated because this is the first time I installed a new hard drive.

    Thank you.

    JO Anne

    Hello

    It may be faster to simply restore the image of Windows 7 that you have created the new hard - to do this, you'll need to the Image and a Windows 7 repair CD (you should have been prompted to do this after you have created the Image of the system).  The link below is a guide detailing how to restore an Image of Windows 7 on a new hard drive.

    http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup/

    Kind regards

    DP - K

  • HP G71: Install the new hard drive and the raw copy

    Hello

    My HP G71 is 64-bit, 4 GB RAM and hard drive WD320BEVT. The laptop has more than 5 years of service and I want to replace with a new hard drive while performing a raw copy of the current. I have a dual boot Win 7/Ubuntu installation I want to keep on the new hard drive.

    As I have not found a new HD of the same type and capacity, I would like to replace the current one with an another Western Digital 2.5 ", the IDE interface, but with a capacity of 0.5 to 1 TB (I choose one or the other).

    My questions:

    -can I install one of these hard drives on this laptop? They are compatible with the current BIOS/chipset?

    -If I make a raw copy of the 320 GB drive to the 0.5 or 1 TB, how would the current operating system partitions will be reflected in a higher capacity drive?

    -J' bought an IDE/USB interface adapter as well as to make possible the raw copy, could you recommend, if these questions have the THUMB, a good free to use software that I could use?

    Thanks for your help!

    Yes I use Kubuntu and tried several times to just the entire disk image and it does not reproduce partitions Linux and Grub, but when you try to start Linux it will hang and say can not find the prior specific hard drive. So now I just make a backup of Windows and reinstall Kubuntu from scratch. Much easier. I think there are also Linux backup programs you can use, but never really saw the need.

  • Re: Satellite C50D-A-11 q - how to get key WIn8 and use it on the new HARD drive?

    Hello

    hard drive died in my laptop. How do I get my key Windows 8 so I can install the new hard drive?

    Thanks in advance

    Stuart
    nessydoo

    Unable to get the key separated from Toshiba, but only the Toshiba recovery disc.

    If you have not created the Toshiba recovery disc in the past, then you will need to order this disc from here: http://backupmedia.toshiba.eu/landing.aspx

    The disc contains the image. Image is a package that contains the (already activated) Windows system and all Toshiba drivers and tools.

  • HP EliteBook 8440p: Best boot option after installing the new hard drive and put to memory.

    I just installed the new hard drive for my laptop and will get the cards of two memory installed tomorrow. I would like advice on what would be the best option to start when the laptop for the first time I'm on fire.

    I have the original Windows HP recovery disk came with the computer.

    I also have a recovery disc and a system image on disks created with Macrium Reflect two days ago.

    I also have a recovery disc and a system image is created on an external hard drive Seagate two days ago. (I've read mixed reviews on these is currently working as a media of rescue with Win7 Pro).

    I guess if I use the HP recovery disc I would be then just use any system image I prefer, without the recovery disk. Anyone know if it makes a difference at all which method to use?

    bozzle73

    My recommendation would be to restore using the image of MR (Macrium Reflect) you did.

    But then, I used Mr. on all my PCs for years and am a big fan - having had it Miss ever in the years and years of use.

    You will need boot from the boot of MR media (you did that right) and, if you photographed all the required partitions for the operating system, restore it on the new drive should take a few minutes, and when this is done, you reboot and everything should be OK.

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • need to upgrade 250 GB hard drive, how I transferred all my files and xps3 pro for the new hard drive without lsing all this?

    need to upgrade hdd 250 GB how I transferred all of the files and opperatting sys win xp sp3 new disk hard ad not lose any

    Hello

    You cannot transfer the operating system from one hard disk to another. But you can use the backup utility to backup data and restore it on the new hard drive.

    Reference:
    Install, reinstall, or uninstall Windows
    http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
    How to use the backup utility to back up files and folders in Windows XP Home Edition
    http://support.Microsoft.com/kb/308422
    How to use the backup utility to back up files and folders in Windows XP Home Edition
    http://support.Microsoft.com/kb/320820
    How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista
    http://support.Microsoft.com/kb/309340

  • My hard drive crashed, I bought a new, and I have the restore disks but it error when you try to load on the new hard drive!

    It wont let me load Vista on the new hard drive

    Hard drive test:
    Test your player - create a Bootable CD:
    Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
    http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

    For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

    Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
    Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
    Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
    Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
    http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
    Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
    Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
    http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

    J W Stuart: http://www.pagestart.com

  • need to change my old hard drive and install vista, a new moved it to the new hard drive

    change from my old hard drive with a new one.  Vista installs in the new hard drive

    How to clean install Vista:

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    See you soon.

    Mick Murphy - Microsoft partner

  • Operating system and the new hard drive

    I have a question:

    I have a HP a4302f - with stock specifications:

    A computer virus has little or nothing to do with a hard disk crash. Please include the exact error messages and/or screens that remains stuck on the computer.

    A 500 GB hard drive at 7200 RPM SATAII should run around $ 45 to $ 70, and the operating system can range from $ 0 to $ 30 depending on exactly how handle you the situation.

    Is that what you had created your HP recovery disc set staff when you first set up your computer, you would be able to return the computer to a factory State even with a new hard drive. Since it does not appear that you have created these disks, you must buy a set of HP recovery disks or disk installation of operating system with COA and product key. None of these methods should work as expected and you will leave with an operating system on the new hard drive.

    You can order a set of discs of HP recovery directly from HP or third-party ComputerSurgeons.com. Purchase of a full blown Windows OS is not really necessary and you can actually download the Windows operating system to use with the key already on the side of your computer. For a hard drive, look at Frys.com Newegg.com, Amazon.com, etc.

    If you have any other questions, please post them here.

  • Installed the new hard drive and now can't activate Widnows 7 as it says not valid for clean installation

    This computer is having problems and we tried to upgrade to Windows 7 hard drive crashed.  We installed the new hard drive.  Now, we try to activate this copy but code comes up saying invalid for a clean install.  We need to have some new code or just get ours to work.

    Skip entering your product key Windows 7 and complete the installation.

    When you reach the desktop, click Start, right-click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click the link x days before activation.

    Click on the link that says: "show me other ways to activate.

    Enter the product key

    Click next

    Select the Activation of the phone

    Click Next when you enter your key page

    Select your country

    Click Next, call the number listed

    Be sure to explain your situation to the Appeals Officer.

    Provide the installation generated when ID requested by the call agent

    They give a confirmation ID in return, enter it

    Click next to complete the activation.

    However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

    15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

    So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

    or

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Hard drive has been corrupted and replaced it with the new hard drive but couldn't get the windows genuine back 8

    Original title: recovery of original windows 8

    When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.

    Please help me to get my windows genuine 8 back so I could get additional updates downloaded.

    Hello Vishal,

    Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

    If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.

    See the suggestions posted by Andre Da Costa replied on March 7, 2013.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-get-Windows-8-product-key-in-preloaded/ea0e53ae-3506-4ba2-a092-f266ece7072f?auth=1

    In addition to this, see:

    Product key lost or misplaced (certificate of authenticity) for Windows

    If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.

    Hope this information was useful.

  • Hard drive crashed with CS5 on it. Has not been disabled before the collision. Desktopcomputer again loaded on the new hard drive and bu news updates do not work on the new computer.

    Hi, I hope I'm in the right forum! I have a laptop Aspire with Photoshop CS5 extended. The computer's hard drive crashed and so I had to get another hard drive! Obviously as the hard drive crashed, I was unable to disable CS5 extended before the crash. I have it charging on the new hard drive and in the meantime bought a desktop computer in which I loaded CS5. Updates have been working fine on the laptop. I tried to update the program on the new computer, but continue to receive error messages. I have read in any problems and think maybe computer laptop harddrive that crashed had CS5 yet on it, as I was unable to turn it off because I didn't know he was going to crash. I am only able to load CS5 on 2 computers and if it is still on the destroyed hard drive so I'm not able to turn it off and so I presume that is why I can not download the updates on my new computer. I hope someone can help me. I want to keep CS5 on both computers. Thanks in advance bunch Kara

    If you see excessive activation anomaly of counting, contact adobe for hourly pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html and request an account reset activation.

    If you receive a different error, what exactly is this error?

  • I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive.  No idea what I'm doing!  Thank you!

    I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive.  No idea what I'm doing!  Thank you!

    http://trials2.adobe.com/AdobeProducts/Acro/11/Win32/AcrobatStd_11_Web_WWMUI.exe

    This is the file I download - but when I go to the Setup process, I bought for the installation program Adobe Acrocat Pro XI (11.0.07).  When I insert my serial number, he wanders as invalid.  I am running Win 7 Pro.  It worked fine on my old hard drive.   I think I maybe win64.  Does it matter?

  • Followed my previous inquiry, my hard drive crashed and lost my copy of Acropbat 9 in installing the new hard drive.  How can I go to re - install Acrobat 9 from the disc, I hold. Thank you, Don Hamilton

    Followed by my previous inquiry, my hard drive crashed and lost my copy of Acrobat 9 in the installation of the new hard drive.  How can I go to re - install Acrobat 9 from the disc, I hold. Thank you, Don Hamilton

    Just reinstall from the disc (or download it from https://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html) and activate it with your serial number.

    If your number of activations exceeds max (2), then you will need to contact customer service.

  • Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number.

    Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number. How can I activate it?

    Hi Uri,

    Please click on the link below and contact the Adobe Support via chat.

    Contact the customer service

    Hope this will help you.

    Kind regards

    Hervé Khare

Maybe you are looking for

  • Why do I get, every 5 minutes or so, an error code "the Script is not responding" dialog box?

    The dialog box indicates, "a script on this page may be busy, or it may have stopped responding."Script: http://cdn.doubleverity.com/avs484.js:48. » Http: / / different addresses appear on different instances of the dialog box. What can I do to remed

  • Get rid of the 'Unsorted Bookmarks' in FF 30

    30 FF is apparently hard-coded. "Unsorted Bookmarks" is now at the end of my well sorted list. I want to get rid of, permanently delete, kick on the sidewalk. It's the kind of ugly with this thing hanging out there. I'm using Linux Mint Debian Editio

  • Where the version history?

    Where on this site is the history of FF Android version?

  • Pavilion g7: stranger in my local network

    I have 2 PCs in my local network. The old one works in windows XP SP1, the new one under the home premium windows 7 (64-bit). Both are set in my local working group. At first, I could see each one of the other and use files and printer. Then, after w

  • Apps to optimize on reboot

    I used the Turbo for the last 2 months, the 4th phone in the Droid line that I owned. I have cam on a problem in the last two weeks I've not seen before on the Droid phones. Whenever I reboot the phone, I get the message 'Android's upgrade... "and ex