HP mini 110-3500 laptop: computer laptop HP mini 110-3500 fails to start after the SSD upgrade

Similar Questions

• laptop past in an endless loop of starting after the recovery of the PC

  I have a laptop of DV2109NR who was riddled with viruses. It was suggested that to make a recovery of the PC hard disk. The first attempt was made without reformatting. After 10 hours, the recovery said that completing. After you click OK, the machine went to the screen of Microsoft XP, then a black screen, then the HP invent screen with options press ESC to change the order of starting, and F10 to access the configuration. This scenario keeps repeating. The computer ran for hours and nothing happened. I then did an other PC Recovery do a reformat of the HARD drive and I am still affected by the same systems. I went in the diagnoses and tested the HARD drive and got an error message 'test status #1-04 Fail', which I understand is a bad drive. The drive was working fine before the recovery of the PC.

  I also tried emergency boot CD disk, change the boot order, but nothing happens.

  Can someone me in the right direction / I hope I did it correctly guide as this is my first time posting. Thank you

  If the HDD was beginning of failure, probably the stress of 'charges from virus' and make the recovery pushed over the limit. A new hard drive should be relatively inexpensive and easy to replace. Hope you had a defined recovery disk.

  Welcome to the forum!

• My laptop still give me a version track even after the connection

  I downloaded CC on 2 Mac 1 desktop and 1 laptop.  My laptop still give me a version track even after the connection

  If it please try to disconnect from the creative cloud and reconnect. Try to follow:

  1. https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html
  2. https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?

• Z600: computer does not start after the installation of the 5 TB SATA drive

  My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk.  After removing the drive, the computer starts.  I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?

  Thanks for the info.  I added the GPT to my search and discovered what had to be done in disk management.  Here is a page with step by step instructions and photos.  http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• computer does not start after the installation of vista updates.

  computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.

  Hello

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope that information was useful

• After removing the Tdss rootkit, computer laptop My Windows Vista Home Premium keeps restarting after the connection. __

  I had the Tdss rootkit on my laptop and removed using TDSS Killer of Kasperky. After the reboot, I have connected and saw a box that displays "Please Wait". After 5 to 10 seconds, my computer restarts. After the reboot, it shows options for Windows Vista loading, i.e. the safe mode, safe mode with network. I chose the mode safe mode with networking and everything works fine. The system properties box opens automatically. When I try to boot into normal mode, he repeated restart after the connection. I tried to run a restore of the system into safe mode with networking, but it tells me something about the system restore is in mode offline. I hit a brick wall and don't know what to do next. I don't want to if I have more options to factory default restore.

  The TDSS rootkit is very destructive.  It is not uncommon to make a computer work is not properly after removing it.  I advise you to restore your computer to factory default.  Not only is this the best option, it's the safest option.  I wouldn't consider the computer to be trusted without going through the restore process.  Even if you can be sure that 100% of the infection has been removed, you have no way of knowing what changes the malware made to the settings on your computer, which may be exceptionally vulnerable to future malware attacks.

• My g56 laptop is compatible with the ssd upgrade

  I want to spend my hard drive on my G56 laptop to an SSD. Is this possible?

  Altogether. Any laptop computer or any other that uses a SATA hard drive can work with and benefit from a SATA SSD.

  Ideally, I need the number of entire model, but here is what I think is your Service Manual:

  Manual

  For installation instructions, see page 37. The best and easiest way to do is to use cloning software and a usb Kit of SATA external drive to copy all the contents of the existing on the SSD drive. This is why you must get an SSD at least as large as the amount of data on the drive already more than 20% for comfort. For most people that means getting at least an SSD 240 or 256 and preference a SSD of 500 or 512.

  A 512 GB SSD will put will cost you at least $315 and a 256 will be around $165. Here's a good 256 on newegg.com:

  http://www.Newegg.com/product/product.aspx?item=N82E16820147248

  This is the type of SSD, I have my own laptop. You can pair it with a laptop computer upgrade kit which includes the adapter cable.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Sony VGN - NR160E Ultimate laptop. w / Windows 7 Ultimate, failed to load because the c:\windows\system32\drivers\elxstor.sys of the 5.2.10.211 file is corrupted or missing

  I have a laptop VGN-NR160E Sony with an Intel Core 2 Duo T5250 / 1.5 GHz with Vista OEM. It has been upgraded to Windows 7 Ultimate. The former owner has not only any disk, therefore, or I'm doing. I have after I tried to update and got an error this system failed to load because the c:\windows\system32\drivers\elxstor.sys of 5.2.10.211, the file is damaged or missing, I tried all the computer in repair and drives the ISO of Windows 7 options, I need help by someone much more intelligent and savvy than me in computer science.

  You have a pirated copy of Windows 7 Ultimate on your system. You must install a genuine copy.

• Laptop Dell XPS 13 L322X: 8 beeps start after replacing the screen

  Hi all

  I have laptop computer Dell XPS 13 L322X (serial number: CC2YVW1).  I use an external monitor because the screen is flickering with vertical lines and ghosts of the colors. I've updated the Bios and the driver video and tried the diagnostic mode (power and the D - key... and) without success.

  I just bought a new replacement compatible screen but the I cannot start using the new form and meeting the 8 beeps are heard. I tried to start with the external monitor and using power on the laptop with the D key, the new screen of the laptop began to switch colors four times and return the sound signal.

  I tried to disconnect the battery and the AC power and maintain the power to drain the left stored energy from capacitors without success.

  Thanks in advance for your help,

  Sala

  In this case, return the set of sieves of replacement - it's probably the cable is bad (but since it is an integral part of the screen, the set should be replaced.

• Install Web Premium CS4 Student Edition on laptop after the Question upgrade Windows 7

  I hope that this has not been asked before, but my question is this: I want to upgrade my laptop Windows XP to Windows 7.  But I've heard that all programs be uninstalled after installing Windows 7 on a computer running Windows XP.  I have to reinstall all the programs again to use CS4 Web Premium.  But my student edition says that I can only install the program on two computers.  Does that mean I can install the program twice, or can I still install on the same laptop after changing the operating system (I installed CS4 on both computers, my computer, laptop and desktop)?  I want to continue using CS4 Web Premium on my laptop but I'm worried I won't be able to install it because I installed CS4 on my laptop and desktop (two installed already).  I would like to know if I can install on the same laptop after upgrading to Windows 7.  Thanks in advance for the help.

  WebMacro123

  The question isn't installation... it's activation. Disable the software first. (Help > deactivate from any application).

  Back up all your data, preferences, etc. because, as you note, it will be a clean install of Windows. Know that it is only cool method to upgrade a Windows installation. NEVER don't upgrade a Windows in place (or, IMO, Mac OSX).

  Bob

• Computer will not start after the installation of Windows Vista SP2

  
  After downloding and installing Windows Vista SP2 on ACER laptop for my daughter, I can no longer start the computer.  Initially registered startup C:\\Windows\System32\drivers\ecache.sys as corrupt file repair.  Change BIOS to boot first from the optical drive and the departure of computer with Vista DVD in the drive, I accepted the option repair.  No chance that the machine always fails to start and always displays the window "Statup repair."  Auto repair is always unsuccessful.  Repair suggestions will be appreciated.  Thank you.  Bob G.

  Support Microsoft still offers a FREE support for Vista SP2.  Go to: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1 where they will help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• iPad mini 3 will not start after the os 9.2 update

  I just updated my ipad mini 3 iOS 9.3, after the download and installation now it does not start. just show a white screen with black apple logo.

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Computer does not start after the screen goes blank &amp; Compaq.

  Hello

  A few weeks ago, I turned on my PC and it showed at the Compaq screen and then went to a blank screen & would not respond. I held the switch button to turn it off and after 4 attempts, it start fine. Next time, it took 20 attempts to initialize and now it does not start, it will be maybe if I try like 100 times he can do... The problem is when the Compaq screen comes up it comes only for like a second so I know that it does not start, if the Compaq screen stays for a few seconds as 3 + I know it will load windows and start.

  History > the computer originally had XP and has been replaced with VISTA memory was 2 * 512MB, but it was a bit slow and I was advised to upgrade. I bought 2 * 1 GB memory and put it in my PC a few months there may be 5 + had no problem so far.

  I tried the following:

  Remove the memory and replace it. Remove the 2 * 1 GB of memory and its replacement by the Moose 2 * 512MB to check if the memory is at fault.

  Cleaning of the dust around the fan (at this point, I removed the fan over the CPU and cleaned the thermal compound from the CPU to make it nice and shiny, only tried to start one time after that for a few seconds heard blowing fan and turend it took off. Depuis_lors, I realized that it wasn't just muck and had a purpose na derwiche put a little more on)

  Remove the battery of the BIOS for half a day

  Move jumpers CMOS from1, 2 to 2, 3 positions

  I can not get into the same if BIOS start and hold F1 he will show me the BIOS for a second and then go to a black screen.

  Specifications of the computer

  Compaq Presario SR1629UK desktop PC

  Details can be found in the following link

  http://support.HP.com/us-en/document/c00579251

  Your help would me much appreciated...

  Hi guys,.

  Thanks for your help, I wanted to just give you a batch update. After the grueling process of verifying the destop, memory suppression, cleaning it & all the other techo checks. I gave my pc to somone to look to the he tried not to turn on he opened it removed cleaning my thermal paste back on and told me it was working fine.

  When I bought home all happy, I realized that I had the same problem, I borrowed another monitor and found it worked well! So the question is with my monitor, if anyone has the same problem first check another monitor.