HP Mini 110-3610se recovery Partition problem
Dear HP technical team
Hello. I have a mini laptop ' hp mini 110-3610se "and when I try to create a new partition in the c drive, I get an error and I can not do so get help from software"paragon partition manager"and I change my recovery to the logic partition and then do some activity by this soft ware and after restart my computer windows cannot start and I can not too F11 recovery and now I don't have windows and I don't have any recovery tools and system cannot work by recovery option.
I know that my windows partition not damaged because I change it and I work on the recovery partition but my widows will not start.
now, I can not access the hp suppurt group, please help and tell me what I can do?
Make a Paragon partition manager boot disk, boot from it and undo the changes to the partition.
or try this
Use F8 to the beginning of the power up when you see the HP splash screen, that you get the advanced screen, select 'repair your computer' and press ENTER, once that loads of Windows recovery environment, select 'repair your computer' once again, if you get a dialog box on it to find problems and you want to repair say no.
Once you get to the screen tools select Startup Repair, see if he can repair windows startup, restart when it is done, see if it will load windows now.
Tags: Notebooks
Similar Questions
-
HP Mini 110-3730NR, recovery partition deleted
November 10, 2011
I bought a HP Mini 110-3730NR laptop a few months back and I started to tinker a bit with it. I downloaded this software called CCleaner and I didn't know what disk wipe was (Yes, stupid me) well anyway, I accidentally erased my recovery partitions and all other files in the drive with it. It's a Windows 7 laptop with no. place to imput a CD. Is it possible to reverse what I've done without having to pay the $ 40.00 dollars more to get a backup thumbdrive? And could I may return it to the store because my warrany expires in September 2012? Please, it is perhaps one of the worst days of my life in more ways than one. Please, have some good news for me.
Sincerely,
TrisatanHi, Trisatan:
I'm sorry to say you are out of luck, and there is nothing you can do.
If the store will resume, lucky you.
If not, you can buy a set of recovery disks (if HP even them - I don't see that they do) and a DVD USB external drive to install with.
Otherwise, you will need to purchase a full OEM or retail version of Windows 7.
Paul
-
HP Mini 110: Enter current password problem.
Hi guys, it seems I have the same problem as many others, hp Mini 110 wonder password enter CURRENT: but I have no idea what it is, it seems people have had a response, somone could help me too please?
The error code is: CNU94116TX
Thanks a lot to advence
Steve
E9lov33ga4 enter: (note that in both cases, the 3rd is a lowercase L)
or
e9lov33garKind regards
DP - K
-
DV6 2130-ee (recovery partition problem)
Hello Mr President
I have a problem with my recovery partition
I created a new partition using the command to shrink the C: drive
then when I try to restore the system using the music player it gives me error starting
When I used windows Recovery Manager she also gives me error and wants me to insert windows cd rapair inorder the startup problem
so please help me fix this
I want to restore my hp to factory setting
Help, please
Insert the first recovery disc into the drive and restart your laptop. It will boot from it and reinstall.
-
I found my Systm recovery discs original, and system repair disk but they don't work. The system recovery disk using Dell Datasafe. the option chosen is to run it from my hard drive and the computer restarts when you restart the recovery partition, now I be problem with the Boot Manager: "status: 0xc000000f startup selection failed because a device required in the inaccessible" I have no problem starting the C drive.
so I thought I should run a repair on the MBR on the recovery partition, but then I found that the recovery partition is not assigned letter. This means that I can't transfer the missing files or anything. so the main question at the moment is how to name the recovery partition. and all other thoughts of system recovery by giving this error. should I uninstall datasafe and install DBAR? If Yes, do I need to start on an earlier version of DBAR and upgrade? or can I go straight to the latest version?
ladempke,
Click on the link below for more information to solve this issue. Manually reinstall Windows will not install the factory recovery partition.
-
HP Mini 110-3600 sd screen problem
Hi all
I have a problem with the screen of my HP Mini 110-3600 sd (product code LD078EA #ABH). Yesterday morning all of a sudden it became too small for the content, which means that the bottom was not visible (for example windows, I use windows 7 starter edition). To be clear, that the full screen doesn't work, if I maximize the view, it's actually too short. The night before, it was working fine and I did not install anything until I turned it off.
I tried to install the new drivers and using the different resolution but nothing seems to work. What I find strange is that when I look at op the specs of this laptop it says it works at 1024 x 600, but the pc is recommended to run in 1024 x 768 60 Hz. (The screen has never been replaced) The laptop seems to be confused about her size and position, if I chose a resolution '1024 x 600' and 'centre screen' it looks like the screen space, but he put a black in the top column, so that in the end, she always falls short. And, although I'm not sure about this, I thought the laptop used to support a higher resolution, before this problem (1360 x 768 perhaps?).
Below, I've included a story on the monitor (or pilot), if more info is needed I would bring him a pleasure (but I'm not experienced enough to know what you guys should be now).
Intel(r) Graphics Media Accelerator Driver for Mobile report
Report date: 31/08/2013
Report time [hr:mm:ss]: 16:18:43
Driver version: 8.14.10.2230
Operating system: Windows 7 Starter *, Service Pack 1 (6.1.7601)
Default language: Dutch
DirectX version *: 11.0
Physical memory: 1011 MB
Minimum graphics memory: 8 MB
Maximum graphics memory: 249 MB
Used graphics memory: 93 MB
Processor: x 86 family 6 Model 28 Stepping 10
Processor speed: 1662 MHZ
Vendor ID: 8086
Device ID: A011
Review of the unit: 00* Accelerator information *.
Accelerator in use: Intel (r) Graphics Media Accelerator 3150
Video BIOS: 2036.0
Graph current mode: 1024 x 768 True Color (60 Hz)* The devices connected to the graphics accelerator *.
Active screens: 1
* Laptop *.
Name of the monitor: digital LCD-scherm (1024 x 768 60 Hz)
Display type: digital
Gamma value: 3.54
DDC2 Protocol: support
Maximum Image size: Horizontal: not available
Vertical: Not available
Watch taken Modes supported:
1024 x 768 (60 Hz)
Display Power Management Support:
Standby mode: not supported
Standby mode: not supported
Active off the coast of the Mode: supported
Raw EDID:
00 ff ff ff ff ff ff 00 36 03 00 03 00 00 00 7f
2f of ff 0c 01 03 80 00 00 00 00 a0 00 57 49 9 b 26
10 4f 48 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 64 19 00 40 41 00 26 30 18 88
36 00 00 00 00 00 00 18 00 00 00 00 00 3 c 00 fd
EB 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 68* Other names and brands are the property of their respective owners.
I really hope you can help me, because I am abroad and need the laptop to support my study.
Thank you
I see. Thanks for letting me know that. I see some other posts on this thread that mention check video cable as it passes through the hinges. It is a common problem for all laptop computers with cables video/camera/wireless antenna through the hinges.
Here's your Guide to Service and Maintenance. Display Assembly removal starts on page 61.
-
HP Mini 110-116NR VP363UA #ABA: HP Mini 110-1116NR CURRENT password problem
Hello
A friend gave me a computer recently but could not remember the BIOS password. (The computer has recently received a new hard drive because of the failure of the original). When it starts, it asks a current password. I tried all the passwords I can find here and none have worked.
Fatal Error Code: CNU93906VN
Computer: HP 110-116NR p/n: VP363UA #ABA
Thank you in advance for all you can give me advice.
Hello
Password: e9lofo1g69
-
I have a netbook that says "Enter CURRENT password". I get a CNU94125H6 error message
Please help and thank you
Hello
Enter: e9lov37qzg (3rd character is a lowercase L)
Kind regards
DP - K
-
HP mini 110 computer: current password problem
Hello
It means enter current password, but I don't know what to type. Idk what your password. Maybe someone could help me?CNU9377QB8
Thank you
Enter e9lofxx5pu
Use this code to go into the BIOS.
Disable all passwords that are enabled.
If demand for CURRENT password using this code.
Request NEW password just press ENTER.
If asked to hit just to CHECK password to enter.
Save and exit.
REO
-
Creation of the disk recovery Partition recovery disks or HARD.
I hope that I get good advice from experts today.
Is it possible to create a custom (mine) HARD drive recovery partition?
Is it possible to create discs of recovery with all the updates and the installed program?
Is it possible to update the recovery partition? (with whatever software and installed updates)
For example, I have a laptop pre-installed with Win XP SP2 and I have upgraded to Win XP SP3 and for some reason any if I restore my laptop with the recovery discs or HDD recovery partition, the laptop will be restored to the factory loaded condition (this is XP SP2). Once again, I have to install all programs and install all updates (XP SP3). If we can create a custom recovery disks or custom recovery partition then we can very quickly restore the laptop easily to the last condition (condition at the time of the creation of the partition to restore or restore disks). It would be better if we can create the recovery partition as nothing else is needed other than the laptop for the recovery.
Another option to achieve this is with Norton Ghost (or similar tool) but the problem is that we must always continue the Norton Ghost boot disk to start and recover the image. The compatibility problem with a model in particular must be checked. I installed Norton Ghost 9 on a laptop and the laptop turns off not with the shutdown command, and I have to turn off with the power button / stop. This problem was not to withdraw 9 of Norton Ghost. If we can create our own custom recovery partition, save us a lot of resources--time, money, broadband bandwidth and no tension of the installation of all new programs.
Experts should Tips how to create the custom recovery partition and if this function is not available now experts should examine the possibility of updating the required HARD drive recovery partition.
PRK,
I assume you mean Windows 7 after having upgraded (since this is the forum for Windows 7). Windows 7 has a disk Image feature that can do what you are looking for. More information is here:
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
-Wes
-
HP Mini 110-1034NR PC recovery partition
Hello world
I just bought a HP Mini and I love it, but the recovery partition has been deleted by the original owner. I'd like know if an image for XP download is available and or what other options I have to resume the installation at the factory it came originally with. Thanks in advance
You can order here recovery media
http://support.HP.com/us-en/document/c00810334
If HP does more for your model, order them here
http://www.computersurgeons.com/default.aspx
.
-
My niece has a HP mini 110 that does not have a day. Do a check of the hard drive in the bios, it failed (7 on playback). I though I should get a new one so I ordered another. While waiting for that to happen, I had access to a usb SATA bridge and the opperating system was beyond repair and the unreadable disk from HP mini, I decided to try to repair the disk. So I reformatted the old disk using my desktop computer. Windows had no problem with the drive and it seems to work very well.
I also had to order the recovery disks (intro to windows 7).
In any case try to reinstall using the recovery via the DVD USB drive disks. It kept coming back with error 17 - I found a hard drive error. I also tried to install with a Windows XP installation disc and it was more explicit hard drive it said it had NOT installed it - or "it does not match the sheet material for unity" (or words to that effect)
To get the new hard drive - the same problem. Even if both of these drives operate as USB connected to my main desktop drives. SO my conclusion is that the BIOS start inspect the hard drive, check the configuration of the formatting. that is the size and the partitions etc. and when they do not correspond to the idea of BIOS of good care he rejects the hard drive and finds it is not installed. Or maybe to do some files on the hard drive of base. Whatever it is, the bios concludes that there is no hard drive and will always return a "failed" to the hard drive of the bios test.
Any ideas on that? I need to know exactly which partitions are expected by the bios. Does anyone have these specs, or maybe you have a mini HP and can examine your hard disk and tell me the amounts of partition and the size?
Unless I can get the bios to recognize the hard drive, I don't see how I can reinstall the operating system on it. Any help is appreciated.
Thank you
_______________________
When it comes to fix computers the longest word in the English language is "JUST"... as in "you do just that and it will work" :-)
_______________________HI David
Well, I hope this is my last post here. I had already printed a return address for the recovery disks, being returned to the Netherlands. Just for the beggar of cast iron, however, I decided to try just once more would like to think that now that there is a kind of operating system on the hard drive it might work. But unfortunately still; no joy.
All this time I would be considered may not be something wrong with the external hard drive because it was no problem to start the installation of XP. So I was just wondering maybe it does not receive enough power (it is a slimline portable DVD player that gets its power from a second usb) so I made a DVD player external adhock using an IDE hard drive enclosure (which has its own power supply and an old internal DVD burner I had put aside.
To my surprise and joy; the HP mini started the recovery process. I am now watching reformat the windows partition and copy the files needed to restore the hard disk.
So anyone with a similar problem to the HP mini not recognize the recovery disks is my advice; try an another external DVD drive, preferably one with its own supply of.
Thanks for all your help and patience David.
-
HP Mini 110 3103sl - factory (including partitions)
Good day everyone. I use a HP Mini 110-3103sl for a certain period of time, so I decided to give it to someone who wants to sell it in my name.
Before that, I wanted to restore it to its factory condition, so I pressed ESC at startup and consulted Recovery Manager. I don't remember the exact words, but I remember there were 3 options. None of them mentioned the word "factory" on this subject, so I chose the one that sounded more 'low level': the system recovery. It took a few hours I think. So I thought that I was done.
It was yesterday. Today morning I gave her to the person responsible for selling it.
Later I have to this topic and HP checked by support Web site to know that should have been 4 option instead of three. One of them should have been Factory Reset but I am absolutely sure that this option was not there yesterday. In addition, the support page says that System Recovery has just formats the partition to the OS without deleting other data in other partitions.
Problem is that I had a score of personal data. I took it for granted that the system recovery would bring the PC to factory conditions, but now I'm not sure.
From what I can remember the options were: restoration of the Microsoft, system recovery and Image recovery system reduces to a minimum. No factory reset (Please note that I am Italian, so was the language of options). I turned off when I was asked to choose a user name, so that the buyer could choose a.
So... did the process remove my data partition personal or not? This computer will be in the hands of someone else, someone I don't know, so I need to know if I should try to get it back to format this partition.
If you have win 7 on your PC, and you have selected "System Recovery" on the three options you have listed then it is done and you are safe...
However if it was to Win XP and in as long as you mentioned was not partition recovery image, then you have to worry about it like a netbooks lighter with win WHAT XP had no possibility to restore to the factory like that...
Also as you have been told you were asked to provide a user name... so most likely it is formatted...
but once again... using the formats Recovery Manager only the C drive... so if you have created another partition, then it will be intact... ..
recovery partition will not delete the partitions... only using recovery disks can do...
-
Recovery disc for Compaq Mini 110 c-1100DX
Hello
I contacted HP support several times over the past 2 years without success (a few times when I first bought this PC), so I thought I would try these forums. I bought a Compaq Mini 110 c-1100DX with Windows XP a few years ago and wanted to create a recovery disc for it. I followed the instructions, but I find that the typical HP, who is referenced in my manual, Recovery Manager does not exist. HP support has confirmed this, but refuses to communicate any recovery disks support or operating system. They said I could use the Roxio software that never worked to create or restore images. I refuse to pay $16 for something my other HP computers 5 all allowed me to... create the factory recovery disks. I have an external DVD burner, I have USB flash drives, and I have a desire to find a way to recover the original image. I know that I can make an image of the disk because it is today, and I can use another software to create back ups. I don't want to do that, I want the original image.
Does anyone know of a place to download this image, a line of support that might be willing to send me the DVD recovery, or a way to connect with a more high level and preferably American, support staff? I have 5 HP computers and printers HP 2, and I know the tech support/customer service line is a waste of time. I'm good enough at the end of my rope with HP, and despite the fact that computers and printers have always been good support so so incredibly awful that I can't buy them more if I can't get this simple application is complete after 2 years of trying. Any ready HP there at Carillon?
For reference for anyone else having this problem (or any other issue, with the support of HP), I called 650-857-1501 (HP corporate), went to the business operator, explained my problem and the issues I had with the support of the founded India, she was very polite and transferred me to a very useful case manager named Emily and it solved the problem in 5 minutes. I can't believe how much it was easy after suffering through hours and hours of race around the line of standard support.
-
Recovery Manager uninstalled on HP Mini 110-3131dx
I accidentally uninstalled the Recovery Manager HP on my HP Mini 110-3131dx from my netbook has been slow.
Now I'm trying to reset to factory settings and I'm not able to determine how to reinstall the Recovery Manager.
When I start in using F11 Recovery Manager, all of the options except windows is disabled restore and restore windows has only recent restore points which are useless.
Can someone indicate to me to the right link to download the Recovery Manager. I couldn't find installable upgrade
Here are the specs you computer Netbook HP Mini 110-3131dx. According to the specification, this model left the factory with Windows 7 Starter 32 bit installed. HP provides no downloads of the HP Recovery Manager, HP Recovery partiton or HP recovery media. At this point, you have several options available to you;
Backup all your personal data before all the instructions below.
(1) Please mark the 'Active' HP Recovery partition by selecting "Mark Partition as Active" using the Windows Disk Management Console. See HP - partitioning and names of hard drives (Windows 7) for more information on using the Windows Disk Management Console. After your computer restarts, you should be presented with the option to return the computer to a factory condition.
(2) Please use the support of HP recovery, you created earlier to return the computer to a factory State.
(3) If you create this media, please see Windows 7 32 b recovery USB-Kit or contact assistance from official HP through the HP portal to support all over the world, to see if the HP recovery support is available for your computer.
(4), if you can still read the Windows product key of 25 characters on the COA Microsoft attached to your computer, you can also install Windows 7 Starter by using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer. This method will not install HP customizations or value-added software and you will have to manually install all drivers of the PC HP Mini 110-3131dx drivers page.
Windows 7 SP1 can be found HERE and HERE. (Download the Windows 7 ISO)
Link to "ei.cfg removal utility" . (Download and use to allow you to install Windows 7 Starter)
Direct link to Windows 7 USB/DVD Download tool. (Use to create ISO support)
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
Maybe you are looking for
-
Is my product under warranty?
Where on this site can check if a product is covered by warranty? I can´t find it!
-
F150nm Pavilion 17: how to turn the wireless on the Pavilion 17 f150nm
I saw all your comments, but on my laptop there is no button 'wifi' or light. And f10 f9 f10 does not work for me. Please, help me to turn on my wireless.
-
problems to install labview on ubuntu 10.04
Hello, I tried to install the student version Labview cd on my ubuntu system, but when I run the INSTALL script on the linux file I get the following error message: / LabviewCD/Linux/labview-2009/bin/rpmq: error while loading shared libraries: libbz2
-
By train to this day, I am a software on my computer. I get an error message any waiy I do. I was told that I have an installation problem. How to fix cam?
-
Hello! I tried to install the Intel Turbo Boost technology, but I get this error: this computer does not meet the minimum requirements for installing the software. I also hade installed Turbo Boost Technology monitor, but the Turbo Boost technology d