HP Mini 210-1091NR: new HP Mini switch and cord
I came into possession of my daughter's laptop, HP Mini 210-1091NR (she died suddenly). I need to find a power cord for it. Any suggestion would be appreciated. I tried the HP site and it says that they service more of this model. In addition, I'm not sure where the switch. (lol) Can someone help me? Thank you
Hello
Your manual - look at page 9 to locate the power switch on the right side: http://h10032.www1.hp.com/ctg/Manual/c01988326
Record: support.hp.com/us-en/product/HP-Mini-210-PC-series/4075896/model/4125473/document/c01989622/
Go through manual and get the part number of the power supply cable, get the part number of the power supply cord in HP part store or through the online store.
PartSurfer.HP.com/Search.aspx
Concerning
Visruth
Tags: Notebooks
Similar Questions
-
Try to set up my mini iPad and it won't let me choose a network that no backup is compatible with the version of iOS on iPad (9.1)
kellycfromlosgatos wrote:
Try to set up my mini iPad and it won't let me choose a network that no backup is compatible with the version of iOS on iPad (9.1)
First talk you about selection of a network, and then say that there are no compatible backups. Do you have an older device? Having problems connecting to Wi - Fi, or restore a backup problems? If you had a device more former, is - it possible that this device had 9.2 on iOS? If Yes, then you will need configure the Mini iPad like new, update the iOS 9.1 to 9.2, and then you must use the settings > General > reset > erase all content and settings, to bring him back to the installation wizard. From there, you will be able to restore your previous backup.
-
Hello
I have a mac mini end of 2012, air2 Ipad, mini iPad and iPhone 5. I have a problem: while I can use airdrop between iPad and iPhone, I can't use airdrop
between mini mac and other devices that I own and vice versa. Can someone help me?
Thanks Vincenzo
Mini PS mac is updated with OSX El Capitan
The Mac sees the iOS devices in AirDrop?
IOS devices see the mac in AirDrop?
It worked before?
Have you put off, then back on your router?
-
Hello
Since the upgrade to El Capitan, I noticed that the overtime that I use my IPad, IPad Mini, iPhone and sometimes with my Mac Min, this never happened with Yosemite or indeed any other OSX, no clue as to why this is happening and suggestions to stop it as it gets pretty boring.
Thank you
Kind regards
rachealfromva
Where it ask password and what you use in time.
-
Since a recent issue of app updates on my iPad a applications - Gummy Drop mini disappeared and there seems to be no update in my update of the applications list or I can delete. I tried a reset nothing helps. What can I do? Thank you very much. Steve.
Not quite sure what "disappeared" means. You can try to remove and re - download.
-
I lost my mini iPad and I do not know how to locate without, find my iPhone
I lost my mini iPad and I do not know how to locate without having to use, find my iPhone
You can't find it if you do not find my iPhone turned on. Do you provide?
Here's the Apple Support article for all the things you need to do if your device is lost or stolen:
If your iPhone, iPad or iPod touch is lost or stolen - Apple supports
Good luck
GB
-
Quick start for Windows 10: Satellite Mini click and others
I had some problems with the camera and the battery on the Mini click and another Tablet from the Point of view (Holland).
He occurered that after updateding etc. on drivcers restart the old problems would return that was due to the quick start option that is set in the bios NLE, but can also be disabled
Settings > Power Options > Ssettings change existing > Shut doen settings > turn on TASF start [Uncech box]It seems that some applications don't close properly when you use the option stop and Hibernate in the memory of QuickStart.
This occurs if you use either reboot option to turn off manually with a second 10 press the manual power button
A note to tell you that you can also find the option above via
Control Panel > hardware and sound > power options > etc. -
Hello I Have (IPAD MINI DEVICE) and have problem In My Memory I have 12.5 GB, and using less of it and A Nofticate it indicates your size will end soon, or something like that I deleted the apps and got 100 MB and after all in the Nofticate come back and something has my size and it says Iam using fully 12.5 GB and I amnt Iam using just use it 4 or 5 GB
Try to provide the exact text of the message you see. "size will end or something" identifies not enough information for anyone to be able to solve the problems.
In addition, check if reference is made to the size on the device, called space iCloud.
-
Hey! I have the 1st generation mini iPad and runs the latest version of iOS 7. Do you think I should install iOS 9?
Question like this will get answers: Yes... No... sure... don't even think about it... absolutely... no way... my mini blah blah... etc.
The final decision is yours. Your device, you decide.
-
ScrollBar takes a min appears and then disappears
ScrollBar takes a min appears and then disappears
You can change the setting in the system-> general preferences
-
Trying to activate my brother Printer HL-2270DW with Dell Inspiron Mini. It is not on the Mini CD and can only find HL-2170DW. How can I get this printer to connect without using the disc?
Please do not let your Windows version a secret.
Find the driver here: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=hl2270dw_all
Install the driver and then connect the printer.
-
Why the fast user switching and the new Windows Search use the Terminal Services?
Recently, I was struck by a piece of really bad, malicious malware that totally trashed my operating system. Therefore, as I rebuild my system, I am applying the appropriate safety precautions. Among the recommendations of Microsoft is to reduce your footprint of security by disabling unnecessary services. One of these services that I thought I didn't need was Terminal Server services, since it is a way for a person to get to my machine remotely.
It turns out that, however, other services that I want to use, such as Fast user Switching and window new search utility, depend on the Terminal Server Services. It makes no sense to me from a safety point of view. This seems to be a bad design decision, because security trumps utility.
If Microsoft is listening, I would like to know why you made this decision and you have changed in Windows 7?
Second, is there a way to always have the Terminal services Server running and at the same time cut access remotely through this service?
I don't know about the 'new' Windows Search, but what about the fast user switching you ask to run several sessions of Windows when you switch between users (a session for each user connected) and the only way that Windows can do is to act as a quasi Terminal Server, it needs Terminal Server services to run multiple sessions.
John
-
Mini 110 and driver OfficeJet Pro 8500 wireless
I have an OfficeJet Pro 8500 909 g installed a few months, and it works very well with three laptops from Dell and a Dell desktop computer using the wireless connection. Then, I bought an HP Mini 110 and tried to install the drivers for the 8500 from the disk provided with the 8500. During the system check that the installer has determined that the screen resolution of 1024 x 576 of the Mini 110 was insufficient and demanded a screen resolution pass at 800 x 600. Tried installing online - same problem w / ground 1024 x 576. Got in a chat online with an HP technician - it offered to download and install the HP DeskJet 990c driver and gave me clear instructions on how to do so, claiming that he was 'the solution '. While I am has not opposed in principle to 'the solution', I asked too many questions and either it bailed out put or the session has expired.
The questions are:
(1) the 990 c driver is actually a viable solution? Some other threads I've read indicate that "mixing and matching" printers and drivers can have unexpected and unwanted results.
(2) I've read how to 'force' a change of screen resolution of 800 x 600, which probably (?) will I would install the 8500 drivers - but what happens if I change the sdcreen back to 1024 x 576 ground? The ration of aspect printer or the print size or appearance get all messed up?
(3) why does it matter even the resolution of the screen? Is it a question of WYSIWYG? If it does so then 1024 x 576 ground is going to be a problem w / almost any printer, is not?
Thanks for any help you can give.
Don
The software requires a minimum of 800 x 600 resolution so that the HP software can be completely visible on the screen. If the vertical resolution is less than 600, then there is a chance of the window not being is not completely visible, and so you may have problems using the scanner software. Follow the document below to force the resolution to 800 x 600 temporarily to install the software. Once you change the resolution back to the native, the software will work, but the window CAN be cut and not be entirely visible.
-
Hello
I was wondering if someone can help me, I am a humble sysadmin with no real network admin training.
I have the following Setup to work in a rack in our data center.
2 x Dell Sonicwall NSA2400
2 x stacked switches Dell Powerconnect N5524A Sonicwall is connected to each switch (active-passive)
Every Dell server has 2 x nics in servile failover mode, one of each network card connected to each switch
This is done to allow a full redundancy for network, cable, switches and Firewall interface cards. It works well.
The above mentioned rack is now full and we ordered a new rack that is in a different datacenter of construction on the same site. We decided to buy another set of stacked switches and _extend_ (no battery) these via optical SPF on the rack on the other.
The idea is that we still have the switch fault tolerance but link to two grids through 10 GB. The new switches are 2 x Dell Powerconnect N2048 and have been implemented stacked with any connected devices.
I have implemented SPF ports on both switches to be a junction ports and connected the two sets of switches, unfortunately our site went offline, our alert went ballistic and no servers could not talk to each other!
Quickly, I unplugged the new switches and after a worrisome 10 alerts deleted seconds and the site is back online.
I don't know why this has happened and reflected on the STP parameters that my googleing seem well. I don't know I'm missing something basic.
I'll post a framework and a diagram in a follow-up post
Which is no doubt tree covering the shot weight. It is a good idea to assign lower priority to the main switch. Generally, your root switch will be the one that plugs into the firewall. Definition of priority on the main switch to 4096, it will make the root switch. So as you work your way through different layers of the network, increase the priority. Access layer switches can be left by default.
I would also check the physical connections for loops. In situations where you have multiple connections switch, make sure that these ports are configured in a SHIFT.
Keep us informed.
-
New switch and can not download IOS
Hi all
I just bought a new DS-C9124-K9 Cisco switch and there is no OS on it, when I go to download the operating system I get an error saying"
Required service contract To download this software, you must have a valid contract associated with your Cisco.com profile. If you do not have a service contract you can get one through: - Your team if you have a purchase contract direct with Cisco Cisco
- Your Cisco partner or reseller
Once you have the service contract, you must associate your service agreement with your Cisco.com user ID with the Profile Manager "
How can I fix this to get my ass expensive switch work XD
AH, I forgot the problem. in any case you need cisco smartnet account or valid service contract are necessary for most items to download on the cisco Web site. If you don't you should contact your Cisco team account if you have a Direct purchasing agreement or contact a Cisco partner or reseller to purchase a service contract.
Concerning
Maybe you are looking for
-
Satellite L550 - failed to get product
My friend and I just bought 2 new Toshiba both provided with Windows 7. When my gf transformed is turned on for the first time and he was recovering, it off because she didn't plug the power supply >< when="" she="" turned="" it="" back="" on="" it="
-
Reminder of control not found in the DLL
I write a DLL for use in TestStand using panels in a .uir file. Callbacks for controls are in the source file for the DLL. In another DLL function, I call LoadPanel to put the Panel in memory and I get an error saying: he cannot find the callback fun
-
Ideas: Programma u lapses problems encountered Foutberichten Recent p die u aan uw computer Wat I al geprobeerd om het op clean would you lossenDon't forget not - says is een openbaar due forum private information such as E-mail bericht van telefoonn
-
They said that the only HP Chromebook 11 supported by google, which is not me on why this product using the name of "HP". That seems very misleading to most consumers. Please advise!
-
Insert the voice for Word 07 comment in Vista on Tablet PC
I use the function "insert a voice comment" in Word 07 on my old XP PC. I easily recorded comments in 60 second, they said. Now, with my new tablet PC which has Vista, I can not get this function runs. When I click the icon, I get a window asking me