HP Mini 210-1170NR will not post

Similar Questions

• HP mini 210-1170NR: not found network controller driver...

  up to what a week ago I was still able to connect to the internet via a wireless connection... so when my friend formated my laptop I could not connect wireless but I can always connect cable... then I tried my laptop what was wrong then I discovered that he was missing the network controller driver...

  What should I do?

  Hello

  The following link has all the requried drivers for your laptop, including wifi drivers, find out wat wireless card is installed on the device, install the respective drivers.

  http://support.HP.com/us-en/drivers/selfservice/HP-mini-210-PC-series/4151684/model/4221571#Z7_3054ICK0KGTE30AQO5O3KA30R1

• HP Mini 210 factory recovery - not a HP Recovery Option?

  I searched through many positions for anyone who could have this problem but have not been able to find someone, so I'll put it here and hope someone can help out me.

  I'm working on a HP Mini 210 - 4150NR which must be restored to factory fresh State. Many assignments in various forums indicate that it is easier to restart, press ESC, select f11 and then recover to factory settings. However, there are several problems with this (at least for this Netbook). Pressing f11 will start windows normally, it is absolutely * not * bring up the recovery options. However, it is always possible to start the HP recovery from the menu (7 Starter) windows start. From there, however, the only option not grayed out is to use the Windows restore option. Restore factory settings is not available for me.

  I checked what is hidden (D recovery partition is present on the hard drive, but it doesn't seem to be possible to get a recovery to work.) I am currently taking the tack of the execution point to the "reinstall drivers and Applications" for all the drivers and applications identified by the program of HP Recovery Manager and who can help, but I'm very unhappy with the inability to restore the factory State.

  Someone had this problem? Is there an other poster somewhere that you can tell me (and I thank very you much if you can)? Ideas on the follow-up, that I can take to get this system back to square 1?

  Thank you in advance for any help or advice that may be offered.

  I understand that the data is present, but obviously, recovery manager sees something wrong with the recovery partition, I would return it for a full refund or Exchange for another in a box factory sealed.

• XP screensaver time stuck at 20 min wait and will not change

  I had to replace my hard drive and reload Windows XP sp3 is installed. the screen saver will not stop coming after 20 min. I tried to put it all the way up to 9999 min. The power is set to never turn off. Don't know what it takes to re install all over again. Help!

  Hello

  Welcome to the Microsoft Community and forums thanks for posting the question.

  According to the description, the screen saver can't come after 20 minutes.

  Provide more information about the issue so that we can help you.

  We will define the time-out screen saver 0 or none in the registry. See the steps.

  1. open the registry editor. Click the Windows "Start" button and click on 'run '.

  2. on the left panel of the Registry Editor window, click the folder "HKEY_CURRENT_USER", click "Control Panel," click on ""Desktop. " "

  3. on the right side of the Registry Editor window Panel, double-click on ""ScreenSaveTimeOut " and then type the new timeout in seconds in the"value data"box." Press the Enter"" key.

  4. close the registry Editor window and restart your

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  Hope this information helps. Please reply with the status so that we can help you.

• I updated Photoshop CS6 yesterday 11/01/2016.  Tonight my mini-Bridge plugin will not load images... need branch here.

  I updated Photoshop CS6 yesterday 11/01/2016.  Tonight that my plugin mini-Bridge will not load images... direction need here.

  Hi scumbug,.

  Try to restore Photoshop preferences to default.

  Steps to follow:

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Dreamweaver will not post files updated on server

  Dreamweaver CS5 will more post to the server after changing the password.  I get the error message: "an FTP error occurred.  Cannot establish a connection to the host.  Your login or passowrd is wrong.  Please check your login information.  I tried to change the password of ADOBE and the pwd connection host are the same.  This is not enough.

  A Site definition is where you went to find your FTP fields, is how DW keeps your separate sites from each other: GS-01: defining a new site | Learn Dreamweaver CS5 & CS5.5 | Adobe TV

  Stop playing with your user name and password, Adobe has nothing to do with obtaining the files on your server.

  It is also possible/probable the log in information you have of BlueHost are for your accommodation via their Internet site admin panel and are separate from your FTP credentials as well.

  Call your hosting company and find out what are your "FTP username and login. Also be sure to get your 'root directory' and ' address/name of the home server' so you can fill in the fields correctly now that you found. Without this specific info, you will not be able to connect to their computer to download your site. You may be able to put this info via your admin panel, but usually the call will be faster.

• Mini 210-2000 can not recover the system

  Hi, I have a 210-2000 mini hp, I did a system restore and the system crashed. I have no recovery discs and I'm stuck with what I need to do to reset the op sys, can u inbox very much my email with any help rec, im ped. He will go to the safe mode option but does not successfully start, all continuous loop again and again, many thnx, chinboy

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS (usually f10) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.  Post back with the details of any error message.

  Note:  If the option to run these tests is not available in the Bios Menu, use the menu diagnosis f2 .

  You can also publish returns with the following details.

  1. the full model number and your laptop Nr series 210-2000 of Mini - see here for a guide to the location of this information or the list here.

  2 the full version of the operating system that you use (IE Windows 7 64-bit).

  Kind regards

  DP - K

• Why will not post any kind of video format Windows Movie Maker?

  I have a video project together over but when I click 'save to computer' and go through it, he starts to publish but stick to 1% or 2%. I tried just to publish a still image (JPEG) that works. I added a voice on the video image, published again very well. Then added an mp3 which is used throughout the project, which publishes perfectly too. Add a video file, however, freezes it. I tried to break the project down into third to check that it is not "too complex" that didn't work and now even in the sixth that don't work as.
  I tried using videos MP4, AVI and WMV, but nothing to do with a video clip will release.

  I am running vista and movie maker 2.6.
  (And ive also tried to put the project on a Win7 computer and who publishes but the same file wont open (all files component also transferred to 2nd pc))

  I am incredibly frustrated with this now so please, any help would be appreciated!

  I was wondering why you are running Movie Maker 2.6?
  Do you have Vista Movie Maker 6 enforcement issues?

  What is the duration of the project? Long and complex projects
  can be problematic. More short projects (as you have already discovered)
  are generally more successful.

  MP3 files can be problematic... conversion. WMA peut
  be worth a try.

  The. WMV video format is the best choice, and you already
  tried that... but the question is how to convert you?

  Also... it may be useful if you open Movie Maker and go to... Tools /.
  Options / Compatibility tab and disable all filters / OK.
  Or... to... Tools / Options / tab compatibility and left click
  button to restore all default settings.

  There are to many converters available on the net...
  the following links are some examples.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (6) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

• HP Mini 210-2070NR does not illuminate

  The computer was running and makes a funny noise - perhaps the disk is going bad?

  I watch yet, but when I looked, it was off and the led 'works '.

  has been turned off, and the computer does not illuminate.

  How can I determine if the drive is bad and if so, how to replace the drive (and the operating system 7)?

  Any other ideas why it doesn't turn?

  Hello RayVoith,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop does not light, and I'd be happy to help you in this case!

  To turn on your computer again, I recommend the rest of this paper on computer won't start (Windows 7, Vista, XP). This should help to turn on the laptop.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• I have a driver dvd disc to set up a mini-cam, it will not be installed? Why?

  It is a pocket camera, with a disk of driver installation, it says early termination, but that's it, any ideas?

  Hello

  1 have you tried the troubleshooting steps suggested in the previous post?

  2. What is the number of brand and model of the Pocket cam?

  3. are you able to read/play other discs on the computer?

  4. what operating system is installed on the computer?

• Min Page height will not change

  My page should be about 900 px, but he 100500 px and I can not change - the cursor is blocked and when I change it in the properties of the page, it changes just return. I looked for any empty objects by there is nothing below 800 px. Suggestions?

  Using the layers panel, you can also try checking if there are hidden elements (those who do not have eyes in front of them)

• iPad Mini will not show iOS10 update?

  Hi all.

  My iPad mini 1st generation will not show the update option to iOS10 via iTunes or wireless.

  Any suggestions how?

  Your iPad CPU is not powerful enough to run iOS 10.

  (144743)

• HP Mini 110-3500 does not start

  HP Mini 110-3500 will not start. When I try to start I get a prompt back "BOOTMGR is missing" & «Press Ctrl + Alt + Delete to restart»

  I tried a "Factory Image Restore" and it failed with an ERROR msg '0xe0efooo3 '.

  Any help is appreciated.

  Sorry to hear that Geezer.

  You need to replace the HARD drive and reload the operating system.

  REO

• mini 210-1142cl RAM update

  question, is possible to upgrade RAM with a MHz higher than the computer can handle, 1333 MHz > 667 MHz?

  If so, how?

  I want to upgrade my RAM to the mini 210-1142cl from 1 GB to 2 GB,

  According to the manual, the mini can accept an upgrade to 2 GB, but it must be:

  2GB PC3 - 10600, DDR3-667 MHz, 204 pins sodimm

  Centon 2 GB PC3 - 10600, DDR3-1333 MHz, 204 pins sodimm, tigerdirect, slightly cheaper.

  and now he has a black screen, and I can't start with F2, F8 or F10.

  What I did:

  1. update the BIOS to F24
  2. upgrade to Windows 7 Ultimate 64 bit, the Intel ATOM chip is 64-bit
  3. went to crucial.com for scanning of memory, and it is guaranteed to work:

  2GB PC3 - 10600, DDR3-1333 MHz, 204 pins sodimm

  Is it possible to make the 1333 MHz running on the cl 210-1142 mini?

  Yes, it is possible to improve from 1 GB to 2 GB

  Thank you

  I went to centon dot com, the hp mini 210-1142cl is not on their list of supported computers.

  However, I just got a Centon support respoonse and said that part # is compatible to->

  Centon CMP1333S02048.02

  also confirmed crucial RAM

  CT1440459 part number

  Material CT25664BC1339.8FMR

• Adobe Captivate 9 will not publish my project

  Anyone has an idea why Captivate will not post my project? I get an error message when I click on "publish".

  Please show a screenshot of your error message.

  Try experimenting with a copy of your current project, hide slide groups to see if you can then publish.  If it works usually it indicates there is something on one of the hidden slides that prevented the successful publication.  Then you can narrow things down until you find the culprit.