HP MINI 210 loading software

Similar Questions

• Software CyberLink YouCam to a 32 bit OS HP Mini 210-4000

  Nice day!

  I'm looking for a Cyberlink YouCam software for my 32 Bit OS HP Mini laptop 210-4000.

  I tried several times to have in the internet, but all I have is for testing only.

  Can you provide me with recorded a?

  Thank you and more power!

  Software CyberLink YouCam to a 32 bit OS HP Mini 210-4000

  Hello:

  Here is the link to the software you need for your model.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117932-1&cc=us&DLC=en&LC=en&OS=4062&product=5230172&sw_lang=

• HP Mini 210-4000 blue screen of death PAGE_FAULT_IN_NONPAGED_AREA Error

  I've been up and down the Forums here with no specific luck, unfortunately, so I'll ask even if this has been asked and solved in another part of the site that I may have missed.

  I'm trying to untangle HP Mini Notebook a friend, model HP Mini 210-4125sa. The machine starts well enough until last week, when it was suddenly decided to blue screen.

  The text of the error message displayed in the BSOD reads as follows:

  PAGE_FAULT_IN_NONPAGED_AREA

  TECHNICAL INFORMATION:

  STOP: 0 X 00000050 (0X87E40000, 0X00000000, 0X00000000, 0X92442B13)

  I can't start after loading Windows 7 - the load bar screen makes two fifths upwards and that's all.

  I had thought to try to recover the operating system, if possible, of what is apparently a recovery partition that is created on the hard drive (I have not worked with these machines before, unfortunately), but I can't figure out how to get to that partition before the typing error.

  In addition, after trying to download a piece of software of HP USB recovery Flash Disk Utility, I realize it seems necessary to use it in fact of the computer laptop itself, that is not possible.
  Having begun to run various tests on board in the menu of the BIOS, the hard drive Test failed just apparently (more specifically the hard drive part optimized DST test), with ID GGBXXV-66A75U-MFPX0J-61VV03 failure (I don't know if this information is useful but am nevertheless understood). HP unfortunately were not a lot of help as they wil only offers unique support technician call for forty pounds, or to take the laptop away for repair, which cost almost as much as the original of the material costs. Of course, I prefer to try and resolve this issue myself but have hit a bit of a wall at the present time. Any suggestion would be great at this point.

  This test equipment for the hard drive is a gift died of a faulty element. A failed hard drive is a show-stopper.

  Hard drive optimized DST part of the test), with ID GGBXXV-66A75U-MFPX0J-61VV03 failure (I don't know if this information is useful but am nevertheless understood) This is important information.

  A corrupted NTFS (hard drive) volume can also generate the "error PAGE_FAULT_IN_NONPAGED_AREA" stop message.

• HP Mini 210-3000

  I have a HP Mini 210-3000 got my son, it works fine but now the user profile is not recognized at startup and I can't get past the password, the password is accepted, but the message "the service user profile Service has no logon. Failed to load the user profile"I was HP Advanced System Diagnostics and the machine passes all of the Tests such as Start UP, hitches etc.

  The Bios CMU however not to update or restore as update is not available

  How can I fix the user profile so that I can open a session?

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• Mini 210: the mini 210

  Hi guys.
  
  I have a HP mini 210 which I use mainly for internet when they travel, but also for playing iTunes for house music when I execute concerts. Last week the on the key sound turns power on and off remains permanently lit. If I hit him, the o/s tells me that his is switching on and outside, and yet there is no sound on the internal speakers or headphones if I plug them in. Device Manager tells me that the sound is very good, icon audio system looks very happy they control noise. You can see the icon switch between sound off (with the cross inside) and suite. Supposedly I can adjust levels. But no sound, and the orange light on this key remains resolutely. It makes me think that it is not material, but a software problem. All the latest updates are on board.
  
  Met someone with something like that before or have an idea where to find the next?

  See you soon

  KeV

  Hello @kevgl,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I stumbled upon your post on sound level and wanted to help you!

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:
  How can I find my model number or product number?

  In the meantime, have you started having this problem before or after the upgrade to Windows 10?  Try to review the following document and let me know how it goes:

  HP - no sound from speakers (10, 8 Windows) laptops

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP Mini 210-2080ee recovery media

  Asked me to retrieve a defective HP Mini 210-2080ee with a hard drive.

  I can't source a recovery DVD or USB because the machine was bought in the Middle East and media are not available in Ireland or the United Kingdom.

  Any suggestions welcome

  USB with all the necessary software from Czech Republic delivered by DHL on Wednesday.  Thank you very much for your quick response.

  System in place and works perfectly

• Faced with the installation of XP SP3 and XP SP2 on HP mini 210

  Hello

  I followed the steps on my computer, HP mini 210, which was completely unusable:

  (1) Mini Partition Master tool used to boot the system.

  (2) remove all partitions, including HP recovery and everything.

  (3) create a new primary partition NTFS and label c.

  (4) restart the system with the bootable XP SP3 or SP2 CD.

  (5) Windows copies all the files and go to "Start Windows"

  ((6) I select one) to install a new Windows XP

  After that XP is not able to identify the partition on the hard drive. It says no hard drive detected or something it starts and asks to press F3 to exit.

  I tried to enter F9 at startup, and it does not show the hard disk; I mean that the HARD disk is not damaged or corrupted.

  Can you get it someone please let me know what to do?

  Hello:

  You must integrate the NM10 chipset Sata driver controller that I zipped and attached below, then XP installs fine.

  Info on how to integrate the driver, please read the guide at the link below, read the Intel section, and read the document that is "slipstreaming" all drivers from Intel.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

• HP Mini 210-3025 feeding issues its

  Hi all

  This is my first post here, so please forgive me if I'm posting in the wrong section/Council.

  I have a HP Mini 210-3025 AA as a Christmas gift last year of my better half, that I loved and appreciated and never encountered problems with this day (Finally, nothing that I've failed to solve anyway).

  So it's almost a year now and I use it, 2 weeks ago my better half and I went to a holiday and the laptop worked perfectly before that night, and since we were leaving for 2 weeks, I removed the battery (I usually use the laptop without the battery installed in any case, just plug it into the charger) But anyway, removed battery, external mouse and removed flash drives and put in his case.

  This morning after I got home, I tried to turn it on, connected outside the mouse, charger and pressed the power button, but no response... So I unplugged the charger (both supply and the laptop) and reconnected, still nothing; then decided to give the battery a go, which lead to the power led next to the plug of the charger flashes 3 times indicator of low battery. So I plugged in the charger, the red light and should be in charge, but the Start button / stop it turns not again, waited 20 minutes to try again, still nothing, tried with another charger, still nothing!

  Finally I let the battery charge and it was fully charged, but now he is dead yet and I can't turn it at all! Although the battery is charged!

  For a person that most people consider a "geek", I have no idea of what the exact problem is, initially I thought that it could be the power button, but when the power led blinked by pressing it stack installed earlier I ecxluded; thought it could be the charging circuit for not working after 20 minutes, but now it is fully charged, still does not!

  I tried the hard reset, but it doesn't seem to change anything

  I am a very careful person with my stuff, so nothing has been spilled on my laptop, or something like that, but now I have a major problem happening for obvious reasons! And it's a gift from my better half which means I want to return to work just because this isn't just a laptop to me!

  Any ideas/suggestions are appreciated.

  I was not sure from your post if you had been able to reset or not.  However, thank you to try my steps even if you tried this solution in the past.
  
  It is difficult to identify these kinds of questions.  However, I think that your motherboard may be at fault here.  I'll try to explain why.  Battery (seem to) load normally so we can assume that the AC adapter and the battery are in working condition.  However, even with a charged battery, you get no response from the laptop.  With other kinds of issues (bad BIOS, bad RAM, etc.), you will get a SHIFT CAPSLOCK or Numlock blinking code which indicates the problem.  If it was one of those pieces of equipment that has been loaded you would receive a different set of symptoms.  Unfortunately, I can't speculate on the cause of the failure.
  
  I think your best bet is to have the laptop repaired.  You said that you have already started the process to have the laptop repaired through HP.  It is the best option in my opinion.  Just in case where you do not have information you can directly join the HP Support at 1-800-474-6836 for the United States / Canada.  Other areas will have to visit HP's Support around the world to find their contact information.
  
  If you have any other questions, feel free to ask.  Enjoy the rest of your week

• Mini 210-1014ea: Wifi does not not on HP MINI 210-1014ea

  So I've upgraded to windows 8 last year, it was quick but then day after day, it became slow. This laptop has 2 GB of ram and a 64-bit, Intel atom N450 processor. Given that windows 8 has been slow, I have dedcided to install windows 7. So after that I installed, all drivers worked very well EXCEPT FOR MY CONNECTION WIFI. After more than a week of fighting, I tried to update my drivers and do a lot of things. But my wifi it says "no connection available. Ethernet only works. Well, I installed the latest updates in Windows update. Right now I have the latest Broadcom 802. 11 b / g network driver. Version 5.100.xxxx. I tried to uninstall the driver from Device Manager, but even then I can't search for networks wifi, infact it doesn't show all the wifi networks.

  @jass007 ,

  Hello and thanks for the display on the HP support forums.  A question when you did your installation of Windows 7, so that installing your drivers that you start first of all with the Chipset Driver.

  The reason for this, it's a bit like a traffic COP for all the other drivers on the system.  I've seen this cause of conflict with common devices and even up to the point where they are not even appear in the Device Manager.

  If you can make sure that you back up all data.

  Once this is done go to the systems support page and download all the software and drivers and save it on a USB key.

  HP Mini 210 - 1014EA PC - software & drivers

  Once it's done Windows Safe Mode startup.

  Enter SafeMode (Windows 7)

  Once you're in safe mode, that you want to remove all your drivers.  You may need to uninstall one at a time and restart between uninstalls.  Don't forget to start mode without fail every time.

  When all the drivers have been removed.  Start Windows again normally. Here, you will need to install the drivers one at a time.  Be sure to start with the Chipset Driver first.

  Please let me know how it goes for you.

  Thak you again for the display and have a great day.

• HP mini 210-1032cl. I have a new hard drive with nothing on it. I don't know what to do.

  Someone sold me a mini 210-1032cl without hard drive.  I bought a hard drive on ebay.  Where should I go from here.  I can't access anything on my hard drive with disk management.  I did some research and saw the formatting and partitioning of hard drive using disk management.  But how to do this with nothing on the disk?  Which is the best operating system I can buy which also has an Office suite (if there is such a thing)?  I'm trying to restore the mini without breaking the Bank.  I will soon go to College and I need to get my mini operational as soon as possible.  Apparently, this mini was Windows 7 Starter.  I tried the HP Support, but it is so confusing to me.  I don't know what I'm doing.  Thanks in advance for your help and your insight. Forgive my ignorance.

  Hello:

  My recommendation is to click on the link below, and then click to expand the line of order recovery media, then click on the blue button more details and order the recovery disks that are going to install the operating system, software and drivers originally came with the laptop.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=4125470

  BEFORE YOU ORDER DISKS... Two important points to note...

  1. you will need a USB DVD drive to use with the recovery discs.

  2. the hard disk that you purchased should be the same storage capacity or larger than the original drive came with the laptop.

  The original specifications drive was 160 GB.

• HP Mini 210-2002sa laptop: System Recovery

  Product name: HP Mini 210-2002sa laptop computer model #: XD396EA

  OS: Windows 7 starter edition

   

  Should I for Microsoft Windows 7 starter product key to perform a system recovery?

  If Yes, where can I get it? The only thing I have is the OEM product ID.

  Hello

  As long as you do the system recovery from the hard disk recovery partition (or from the recovery media, you created when the laptop was purchased), activation will happen automatically via the license of software on your bios chip and a certificate of security built into the operating system - you won't need to enter something.

  Kind regards

  DP - K

• Recovery HP Mini 210 problem

  It started to have this type of quick web error and wireless Assistant.

  I decided to reinstall the Recovery Manager software. But the problem is

  After installing the software, he asked to restart the computer. That's why I allowed him to restart,

  but now it comes with a "installation is not complete. Press a key to reboot and

  then use the Setup program to repair the installation. "And this screen appears before the windows

  startup

  Now what's happening is that press each time a button to restart, it goes back to the same screen with the

  above the words. And I can't get into windows, nor the recovery page.

  I have no idea what so ever where the installation program is. and I can't go back to the window to do a full restore.

  can someone help me?

  model HP Mini 210 - 1146TU PC

  Do as he suggests. apparently the application was not installed correctly.

  "Press any key to restart and then use Setup to repair installation"

  You can join the Recovery Manager by tapping F11 continuously at the beginning of a reboot.

• Looking for drivers for HP Mini 210-4027TU A9R55PA product number

  I know the link for the driver and software of HP Mini 210-4027TU A9R55PA product number

  Thanks Dave for this very quick response.

• Wireless network does not work in hp mini 210-2013ee

  Hello

  My laptop can not find any wireless network, or even connect to the cable network.

  Model: HP Mini 210-2013ee
  Product number: XK405EA #ABV

  Note: I formatted and installed all the software drivers, everything works fine but the network!

  Sorry for my bad English, thank you very much.

  Hello:

  These are the two reasons you have no networking capability because they are your Wi-wired adapters and who needs drivers.

  Here they are...

  Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

  Wired:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-93502-1&CC=US&DLC=en&LC=en&os=4062&Product=4326160&sw_lang=

  Paul

• HP mini 210-1000; Windows xp does not install

  Data sheet:

  HP mini: 210-1000

  Product #: WP055UA #ABA

  Hello

  As stated above, I have a mini HP I had for about a year or more.  It came with windows xp installed on it.  After a while I wanted to try using Ubuntu on it and accidentally deleted windows partition and so any replacement by ubuntu.  Now, I would like to reinstall Windows.  I have a windows xp pro disc to do it with.  Now, I tried to boot from the cd so what ubuntu was installed - didn't work.  Wiped my drive HARD all over and then tried to boot from the cd - did not work.

  I am at a loss what to do.

  This is the message displayed,

  "A problem has been dtected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again, follow these steps:

  Check for viruses on your computer.  Remove any newly installed hard drives or hard drive controllers.  Check your hard drive to ensure that it is properly configured and completed.  Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  "STOP: 0X0000007B (0XF7AC963C, 0XC0000034, 0X00000000, 0X00000000).

  He gave me this message until I deleted Ubuntu as well.  I also did a check of the disk by the BIOS and everything is ok.

  I don't know what else can be done.  Thank you for your time.

  Hello:

  All you need to do is load the SATA ACHI drivers.

  You can add them to this prompt F6 at the beginning of the Windows XP installation routine, or you can their wake in a copy of your XP installation disc.

  Please read this helpful guide on the link below and you will soon be real business.

  Your laptop is the chipset Intel NM10 express read the instructions for it.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/TD-p/114120

  Here are the drivers you need. Download and unpack the second file (32-bit).

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19599&lang=eng&OSVersion=Windows%20XP * & DownloadType=.

  Paul