HP Mini 210: Sound silent light 'stuck' on

This computer was initially provided with Windows 7 Starter. I recently uppgraded to windows 7 Home Premium, 64-bit.

Initially, I had bad turn the wi-fi/bluetooth radio.

Now the radio will function correctly but the volume mute led is on, but the sound of the computer is not cut.

I can turn off the sound by using the icon in the system tray.

Any ideas?

I know it's a little slow, but a bit boring.

Thanks in advance.

Here is the final verdict which has solved the problems for me.

Computer: HP Mini 210 t-1000

Operating system: Win7 (originally shipped with Starter - 32 bit; upgraded to Home Premium 64-bit edition)

All other parameters are OEM

When the Home Premium 64-bit Win7 was installed there are a few problems of key board because the sound has not might be cut from the keyboard (stuck on silent light) and wi-fi/bluetooth could not be extinguished (taped to light; required function two presses of the key wireless turns off).

These two issues have been resolved, thanks in part to the good advice of HP Support Agent D5GR!  View to look at the pilot sets put me on the track of successful correction gaps.  Note: I was very careful to replace the chipset drives until I did research more. That would be my last option.

So, my first step, then, was to look at all the drivers of the computer. D5GR has provided the link (see his response me above/below) by pilots.  Given that the original machine is equipped with a 32 bit OS, I excluded all the "32-bit only" downloads in this section.  That included the driver chipset - BTW

Then, I downloaded all the drivers and utilities that were compatible with the 64 bit OS.  This includes the audio driver (sp49308.exe), wireless driver (sp48591.exe) for the Broadcom adapter installed and the Wizard (sp45222) wireless. There are a couple, but I didn't feel that they were relevant to this situation.

After each installation, a reboot has been accomplished.  When I had finished all the problems have been corrected; the computer works perfectly.

Finally, it should be noted that when a retail upgrade (not HP) is installed, there are the features expected that are not addressed in this upgrade - it is usually an OEM "generic."  These gaps must be filled with the provided HP solutions for the specific computer that you are upgrading.

That is my lesson learned in a few words.

Once again thank you D5GR for your advice and continue.  HP; the only way! ><>

Tags: Notebooks

Similar Questions

  • min HP 4250: silent light stuck on hp mini

    have mini4250 of hp with Starter 7 uptgarded 7 Premium that worked fantastically for three years and still under extended warranty... yesterday got virus cleaning of norton and then silent witness on function f11 key remains lit even if is more cut.  has been told to send if for repair but really not looking forward to... Am 80 years old and a guaranteed final novice but Tech say it of a hardware problem, but don't have the key to rework, but light still stays on the list she is silent in accordance with the manual of copied below

    2) mute ● Amber light: the computer is turned off.

    ● Stop: his computer is turned on.

     

    can someone tell me what to provide warranty service do inorder to get this thing annying repaired remotely?

    Thank you very much

    Hi @lubelira,

    Thank you for posting. I understand that the f11 key is stuck on the amber color regardless of real status Mute/one-Mute. I'm happy to help you with this.

    First of all, make sure that all windows updates are installed on your laptop.

    Windows Update is included in the Panel. To check the updates:

    Click the Start button, click all programs, and then click Windows Update.

    Also, I need the product number of your laptop.

    You have the HP Quick launch on the keyboard button?

    HP laptops - understanding and using HP Quick Launch (Windows 7, Vista)

    Let me know if the windows update will solve your problem.

    Kind regards

  • Mini 210: the mini 210

    Hi guys.

    I have a HP mini 210 which I use mainly for internet when they travel, but also for playing iTunes for house music when I execute concerts. Last week the on the key sound turns power on and off remains permanently lit. If I hit him, the o/s tells me that his is switching on and outside, and yet there is no sound on the internal speakers or headphones if I plug them in. Device Manager tells me that the sound is very good, icon audio system looks very happy they control noise. You can see the icon switch between sound off (with the cross inside) and suite. Supposedly I can adjust levels. But no sound, and the orange light on this key remains resolutely. It makes me think that it is not material, but a software problem. All the latest updates are on board.

    Met someone with something like that before or have an idea where to find the next?

    See you soon

    KeV

    Hello @kevgl,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

    I stumbled upon your post on sound level and wanted to help you!

    For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:
    How can I find my model number or product number?

    In the meantime, have you started having this problem before or after the upgrade to Windows 10?  Try to review the following document and let me know how it goes:

    HP - no sound from speakers (10, 8 Windows) laptops

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • HP Mini 210-1094NR recovery

    Hello, I need help now.

    Trying to fix a HP Mini 210-1094NR running Windows 7 Starter.  Boots to the Windows error recovery screen that gives me two options.

    1. run the Startup Repair tool

    2 start Windows normally

    Well you can guess which do not work.

    The repair option is stuck in a loop, the hard drive light flashes once every 3 seconds.   For more than 36 hours left and he said he was repairing.

    So it is hammered.  Y does it have to access a recovery partition?   I have the manual and it says to press F11 or the window button to access a possible recovery partition.  However, these just bring me to the recovery screen with the same options that do not work.

    Any help for this device?

    Thank you.

    More data.

    Consulted with Diagnostics and run the hard drive test.    2% complete... Message says "replace disk 1" hard. "

    Complete test 0% complete... 'Replace the hard drive.

    Smart control... "HDD SMART past.

    Looks like I got a bad disc.  I should know.  It's 28 years.

  • Mini 210% of the battery cannot go &gt; 75%

    Hello. I have a mini 210-2036TU for<2 months.="" i="" recently="" just="" noticed="" that="" my="" battery="" percentage="" indicator="" cannot="" go="" higher="" than="" 75%.="" last="" night="" i="" charged="" it="" while="" the="" notebook="" is="" turned="" off,="" and="" the="" charge="" light="" indicator="" (orange)="" was="" on.="" however="" in="" the="" next="" morning="" the="" charge="" light="" indicator="" still="" shows="" orange="" (as="" far="" as="" i="" know="" when="" the="" batt="" is="" fully="" charged="" the="" light="" indicator="" should="" turn="" blue).="" i="" did="" though="" update="" the="" bios="" recently="" to="" fix="" the="" missing="" home="" end="" pgup="" pgdn="" keys,="" but="" still="" not="" sure="" whether="" the="" bios="" update="" is="" the="" root="" cause="" of="" the="" battery="" charge="" issue.="" does="" anyone="" have="" the="" same="" experience,="" or="" know="" any="" solution="" to="">

    Problem solved by following these steps:

    1. Unplug the AC adapter / CC & remove the battery from the laptop
    2. Press the power button and hold for 60 seconds
    3. Plug the power adapter, put running the laptop and let windows start
    4. Leave it for 5 minutes then shut down windows
    5. When the laptop is turned off, insert the battery
    6. Turn the laptop computer, start Windows, and the battery indicator in the Windows taskbar should now display the battery level indication

  • HP Mini 210-3025 feeding issues its

    Hi all

    This is my first post here, so please forgive me if I'm posting in the wrong section/Council.

    I have a HP Mini 210-3025 AA as a Christmas gift last year of my better half, that I loved and appreciated and never encountered problems with this day (Finally, nothing that I've failed to solve anyway).

    So it's almost a year now and I use it, 2 weeks ago my better half and I went to a holiday and the laptop worked perfectly before that night, and since we were leaving for 2 weeks, I removed the battery (I usually use the laptop without the battery installed in any case, just plug it into the charger) But anyway, removed battery, external mouse and removed flash drives and put in his case.

    This morning after I got home, I tried to turn it on, connected outside the mouse, charger and pressed the power button, but no response... So I unplugged the charger (both supply and the laptop) and reconnected, still nothing; then decided to give the battery a go, which lead to the power led next to the plug of the charger flashes 3 times indicator of low battery. So I plugged in the charger, the red light and should be in charge, but the Start button / stop it turns not again, waited 20 minutes to try again, still nothing, tried with another charger, still nothing!

    Finally I let the battery charge and it was fully charged, but now he is dead yet and I can't turn it at all! Although the battery is charged!

    For a person that most people consider a "geek", I have no idea of what the exact problem is, initially I thought that it could be the power button, but when the power led blinked by pressing it stack installed earlier I ecxluded; thought it could be the charging circuit for not working after 20 minutes, but now it is fully charged, still does not!

    I tried the hard reset, but it doesn't seem to change anything

    I am a very careful person with my stuff, so nothing has been spilled on my laptop, or something like that, but now I have a major problem happening for obvious reasons! And it's a gift from my better half which means I want to return to work just because this isn't just a laptop to me!

    Any ideas/suggestions are appreciated.

    I was not sure from your post if you had been able to reset or not.  However, thank you to try my steps even if you tried this solution in the past.

    It is difficult to identify these kinds of questions.  However, I think that your motherboard may be at fault here.  I'll try to explain why.  Battery (seem to) load normally so we can assume that the AC adapter and the battery are in working condition.  However, even with a charged battery, you get no response from the laptop.  With other kinds of issues (bad BIOS, bad RAM, etc.), you will get a SHIFT CAPSLOCK or Numlock blinking code which indicates the problem.  If it was one of those pieces of equipment that has been loaded you would receive a different set of symptoms.  Unfortunately, I can't speculate on the cause of the failure.

    I think your best bet is to have the laptop repaired.  You said that you have already started the process to have the laptop repaired through HP.  It is the best option in my opinion.  Just in case where you do not have information you can directly join the HP Support at 1-800-474-6836 for the United States / Canada.  Other areas will have to visit HP's Support around the world to find their contact information.

    If you have any other questions, feel free to ask.  Enjoy the rest of your week

  • HP Mini 210-1170NR will not post

    my HP Mini 210-1170NR netbook is no longer valid.

    the battery seems to have expired, but it worked for a week or so plugged into the wall.

    now, when I turn it on, the power light turns on, turns on the caps lock, but nothing except a HDD occasional light twinkle works. doesn't appear on the screen, nothing seems to activate (i., flickering e., backlight setting, etc.).

    I tried to connect via SATA desktop HARD drive and the hard drive works.

    are there steps I can take to fix, or will it take to replace it?

    Hello

    Unfortunately, it seems that you need to replace the mini can.

    You can try to contact support to see what options they have for you.

    Technical support of HP, 1-800-474-6836 in North America. For all other regions click here.

  • network adapter for HP Mini 210-2080nr PC

    I updated my netbook of girls ( range of PC HP Mini 210-2080nr) for windows 7 Home premium and now I have no network card light is orange and when I go to network options is said I have no material Please HELP! teenagers with no internet = disaster hahaaa

    You are the very welcome.

    Here are the drivers you need:

    First install the chipset driver and restart.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-93458-1&CC=US&DLC=en&LC=en&os=4062&Product=4308083&sw_lang=

    Then, install the video card:

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-93287-1&CC=US&DLC=en&LC=en&os=4062&Product=4308083&sw_lang=

    Wired network:

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-93502-1&CC=US&DLC=en&LC=en&os=4062&Product=4308083&sw_lang=

    Wireless network:

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-102505-1&mode=3

    If you need further help, feel free to contact me.

    Best regards

    Paul

  • I forgot the password for a computer hp mini 210. Locked on supervisor. admin password

    My computer Hp mini 210 remained in a drawer for months. All passwords are forgotten.

    When I try old passwords nothing works. After 3 times of trying, I get an error code

    62600599

    I'm totally stuck on what to do.

    Could someone help me please.

    THX RJ

    Warmac

    Please try: 73768519

  • HP Mini 210 - 1010NR black screen

    Hello

    I have a HP Mini 210 - 1010NR which has recently stopped working. I ran several diagnostic tests. This is a summary of what I've done and found:

    First of all, I did a hard reset of the netbook (with power with no battery). There was no positive outcome. I followed this test by testing the hard drive and ram. To test the hard drive, I plugged into my office and did a disk check. The results showed that the car was functioning properly. To test the ram, I have used DDR2 ram from another netbook I and tested the operation of the broken netbook. It was still broken. Finally, I noticed the caps lock button was flashing on start up. I looked at the result of the error. It flickered once every couple secconds. This meant that it was an error of type 1 (CPU failure). How to test a CPU failure and would it be possible that it is something else the CPU or the caps lock key blinks once every second torque means that there must be a failure of the CPU.

    Thank you

    Hello ems316, welcome to the Forums of HP.

    Thank you to provide detailed information on the already tried troubleshooting.

    Regarding Notebook and question it if it is a failure of the CPU, based what you have described with this document: computer does not start and the lights blink or the computer will beep (which can be the one you found). That would be a problem with the central unit. In line with the recommended best option would contact support to see what repair and replacement options are available.

    I'm sorry for the incontinence might cause.
    Thanks for posting on the HP Forums.

  • HP Mini 210 - 1084TU empty is displayed and does not start F10 F2 doensnt work

    When I turn on my HP Mini 210 - 1084TU food cover shows caps lock shift light is solid and the button not fuction - the screen appears blank and not push further.

    What I tried was:

    1 hard reset - 3 times

    2. by pressing f10 or f2 or f11 on power but nothing happens

    Please, guide...

    Found the solution...

    removed the battery cover and just removed the RAM... rubbed with the square of the Eraser again and removed the battery inside waited some time and place it again... and the system is reset... it works... all my data is safe!

  • HP Mini 210-3000sb

    Hey everybody,

    I recently bought a Mini 210-3000sb. I needed a portable light for the school.

    Currently, I am very happy with it, it works well and is very convenient.

    But I have to use a big program for my programming, so I could use a few more RAM.

    I read the PDF with the FAQ, but I just want to be sure.

    Can I put a 2gig chip in my mini? I hope so.

    It can be upgraded.

    Sorry for the confusion but to get things right IM me your address and I will have the warehouse ship you a 2 GB for free.

    It was my mistake to post something before checking double.

    Sorry for the confusion.

    Tim

  • HP Mini 210-1000: Please help! Battery does not charge even if it's plugged

    Hello! I'm writing this fear and despair because my HP Mini 210-1000 is defective and I'm working on my undergraduate thesis.

    The problem:

    The battery says it is plugged and charge but after giving a few hours to recharge, it is still stuck at 65%. Another thing is that I must keep the trendy netbook so he can stay in power. He started last night when I was finishing a paper, then the laptop stops suddenly. When I restarted, I thought it worked well. Then things started acting weird after.

    I already tried things:

    -cold reset

    -30 dry to hold the power button

    -HP battery Test and turned out the battery be "good."

    Data sheet:

    -HP 210-1000 (I got it for not more than 5 years already.) I just changed the battery cable last month. This is the first time, it acted weird)

    -10 Windows (32 bits) | originally from Wndows 7 Starter

    -Intel Atom

    -CPU N450 @ 1.66 GHz 1.67 GHz

    -BIOS Configuration: F.04 - 12/30/2009

    -Product number: WD344EA #ABV

    -Serial number: CNF005CBGQ

    Please help me.

    After five years of reliable use the battery is more capable of providing the power as it did once.

    So, Yes, it seems that the tests failed.

    In the wizard in the HP Support, there is usually a calibration option which restores the full charge, which is 100%, which is currently available.

    If the battery has no real ability to the left, then it will be in fact a bit of a moot point.

  • My Toddler has jumped on my HP Mini 210 - 3070nr now the HARD fact disc noise rattling and it will not be detected

    My Toddler has jumped on my HP Mini 210-3070nr keyboard and the screen went black, so I held the power button to restart the hard drive makes clicking sound now and it wont be detected by the computer. What can I do to fix this?

    Looks like you need a new hard drive for me.

    You can buy online and install and run the recovery image, or have it repaired.

  • SIM 3 on HP Mini 210-1044NR

    My daughter has a HP Mini 210-1044NR and she just Sims 3 for his birthday. I installed everything but the graphics card does not support. I need to buy and install a new graphics card. What is the card one to buy? I have all the proper equiptment to do the installation myself, but do not want to do the wrong thing and destroy the computer. Or is there something else that can be improved simply by downloading only to make it work? Please help, it's really sad that she cannot play.

    Thank you

    krazyBraden

    You can not move the graphics in a mini.  :-(Graphics is a permanent part of the motherboard

    All mini laptop computers (Netbook) is intended only for surfing internet and e-mail and other tasks of light, none are made for the games.

Maybe you are looking for