HP monitor power button

Similar Questions

• Monitor power button stuck or broken

  1908FP 2407WFP and probably many other models

  I have 7 or more Dell monitors and just got my first broken power button today. After disassemble and see the very fragile plastic piece, I am happy that I regularly let sleep instead of using the button. The 10-cent plastic piece is made very thin and flexible, and the actual switch is not directly behind the button (they are all other buttons), but moved to the side to make room for a LED. For this, the plastic, the button bow severely whenever it's pressed. In my case, the button has lasted a few years before the tabs broke the key at both ends showing how fragile, it had become. Firm pressure could probably break it even when new. Because the tabs are so small, the only realistic "repair" is to remove the broken button, use something to push the switch and allow him to sleep. The button band could easily be replaced if only someone could sell them.

  Found similar posts on this forum & youtube

  tclarke,

  We have a monitor of components such as the power button. Simply, we replace all under warranty. You might find someone on ebay selling components to monitor.

• Pavilion 27bw monitor power button is unresponsive

  This has happened once before and I forgot how I fixed. No message power button lock or anything. I tried to unplug for a few minutes, she held down for a minute, nothing. I get static when I touch it sometimes but managed to solve this last time. Suggestions?

  Hello again ebonyruffles,

  If your issue is resolved now could mark my post with the solution with an acceptable Solution. This will help others who have the same problem like you to find the solution and share the same solution.

  I'm happy to have helped.

  Thank you

• Power Button Lock Out

  Hi, when I try to shut down my computer, the screen (HP 2009 series Wide LCD Monitor) will not close.

  It displays the words "button / stop lockout"... anyone know how to fix this?  Thank you

  Hello

  Try the following:

  The Power button lock is displayed.

  The monitor Power button lock is activated.

  Press and hold the power button for 10 seconds to unlock the function of the Power button.

  If the above doesn't work try:

  Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug monitor into and start it

• POWER BUTTON LOCKOUT

  My new HP Pavilion Elite (m9525f) desktop PC, quadcore and my new HP Monitor (w2338h) don't seem to work well together and just purchased April 18/09.   When I want to close my monitor, connected to my turn I push the high power button on my screen and it will not turn off and I get this message "hold on power button?   I'm operating Vista Home Premium(64 bit) entered previously connected.  I called HP support and said the first time to turn my turn and while holding down the power button on my screen, I also had to disconnect the power supply for a minute (while holding down the power button) and then plug my monitor back in and turn on my Tower.  It did not work.  Then they told me to go in my monitor options and click default settings to rest and it does not work. Then I was instructed to go into my device manager, display seetings and uninstall my Navidia 9300GE driver, then reboot my system and it would be re - install, but this does not work either.  Finally, it told me to do a restore of the entire system to the factory settings and guess what?  He has not yet healed my monitor power button problem.  Please help or let me know if there is a solution that I'll remember the HP Support and give them a piece of my mind.  Thank you.

  Hello.  I finally found a solution to my problem of a HP Tech named Dallas who is in the State of Oregon. The solution has been to hold down the power button on my monitor with power, for about 25-30 seconds and finally my monitor off. I can now turn off and then on my screen without any problems. Thanks to Dallas from HP.

• HP vs17x monitor power light flashes

  After that I have wear my computer wakes my vs17x monitor power button/led flashes blue, with the sound of what I guess is power going to the speakers and continues unless I hold down to shoot or to pull the plug.

  After a waiting and clicking on that I can get it back to normal, but as far as I know it's just random clicks that make backup

  Diagnostics/suggestions?

  Thank you

  -Update-

  -This morning, I was able to get my screen upwards by pressing the power button on my keyboard, compaq (Crescent Moon, which puts Eve/displays start/stop/standby menu)

  Also all the icons on my desktop have been rearranged, put to the left/up, but I'm not sure if this is due to my clicking on random

  -This afternoon I after walking away for a bit (after that I turned it on) the screen came back to the top

  Message edited by J_Winn on 10/15/2009 03:52
  Message edited by J_Winn on 10/15/2009 12:48

  I managed to solve this problem by replacing a part burned capacitors in the monitor

  just over $ 3.00 to buy 2 new

  Incase anyone else has this problem

• "Monitor the message" Power button locked ".

  New monitor 23 "HP - HP 2310 m accidentally pressed the button too long power; now, I can't get the monitor to turn off completely. When the computer is off the screen goes into sleep mode with orange orange LED (switch) continuously. How can I completely disable the monitor and the message "Power button lock '? Thank you

  From the Manual:

  Power Button lockout - indicates the power button is locked. If the power button is locked, the Power lock button warning message.

  ◦ If the power button is locked, press and hold the power button for 10 seconds to unlock the function of the power button.

  ◦ If the switch is open, press in and hold the button for 10 seconds to lock power button function.

  See you soon,.

• "The power button lock" on monitor HP 2309v

  
  

  Solved

  Found a similar query (for another monitor) which works with the monitor too. See

  POWER BUTTON LOCKOUT

  2009-04-24 21:41

• Dell inspiron 530 will not start 4 beeps power black monitor blue button solid yellow lite inside

  I HAV a dell inspiron 530 inter processor duel completely stock w vista... when I push the button to switch the fan to come on the button lights up blue then u hear 4 beeps and inside ther is a yellow solid lite on next to the motherboard no power to monitor usb black fan and s stays lite on the back is green as it should b what is problem It can b fixd can I solve this w taking some1 working inside a computer im alittle above a recruit n do thx mike

  maheisel

  Four "beeps", could indicate a memory problem, if you are comfortable working inside the computer, try to open the case, remove and reinstall all memory modules and see if that makes a difference.

  If you not comfortable working with the removal and the reinstallation of the components, then I suggest that you take the Inspiron 530 to a repairman.

  Is the power button LED, blue constant or flashing blue?

  Every change made to the 530 recently?

  The Inspiron 530 convenience store and the diagnosis Codes are HERE the ADMIN NOTE: broken link has been removed from this post by Dell >

  Bev.

• YELLOW MONITOR STAYS ON. WHEN I TRIES TO STOP him, a MESSAGE to POSTER: locking the power button?

  I'm HAVE PROBLEM TO SHUT DOWN MY MONITOR (hp).  AFTER I HAVE SHUT DOWN MY COMPUTER, THE MONITOR GOES TO SLEEP (YELLOW COLOR), WHEN I TRY TO TURN OFF TOUCH THE MONITOR BOTTON, A MESSAGE TO POSTER... POWER BUTTON LOCKOUT.  I DON'T KNOW WHERE TO CANCEL IT.  THE YELLOW LED REMAINS CONSTANTLY ON.

  I had the same problem.  After not seeing no answer to your question, I downloaded the HP user guide.
  Chapter 4 'operation of the monitor'--> "Identifying monitor Conditions" (page 25) contained the following:

  "If the power button is locked, press and hold the power button for 10 seconds to unlock the.

  power button function. »
  It worked for me. Good luck.

• Power Button lockout allows me to turn the monitor off.

  A button on the front of my HP 2310e monitor allows me to turn the monitor off.  When I try to do a "Power Button locked" message.  How to fix this?

  Glad to know that your problem is solved. In case, if you need help, you can always post your questions as well as your valuable suggestions in this forum.

• Need to replace the trim monitor or the power button on the Dell monitor

  1 had to post as a newbe because that could not find the old password and connect. O well

  2. do you have a 17 "monitor power switch broke (little plastic button with a hinge plastic glued to the screen image). Too small for glue and will not last.

  3. Apart from the guarantee

  4. a knowledge of where to get a replacement button or a full face of trim for a Dell

  : Model # 1704FPT1

  Thank you RJ

  
  

• my hp 2009f poster the power button locked monitor

  the screen power not turns off key lock. its very difficult to use the system

  You can try to hold the power button on off for about 30 seconds, while it is turned on.

  http://h30434.www3.HP.com/T5/desktop-lockups-freezes-hangs/power-button-lockout/TD-p/59866

• the monitor can not display any image on the screen. CPU power button is lit orange instead of green.

  Original title: I have absolutely no idea of what is wrong with my Dell Dimension C521 Windows Vista (x 86)

  It is impossible to display an image on the screen. CPU power button is lit orange instead of green.

  See page 47 of the owner's manual

  http://support.Dell.com/support/eDOCS/systems/dimc521/en/OM_EN/RP333A00.PDF

• My Mac Pro 2009 gives me only a power button blinks when I try to turn it on.

  My Mac Pro 2009 gives me only a power button blinks when I try to turn it on. External drives turns on but not the computer or monitor. I tried holding down the power button to restart but I still get only a power button blinking and no departures. It is running IOS 10.8.5 and I use it mainly for recording and mixing of music. I use Digital Performer and, sometimes, ProTools. Nothing new has been installed recently.

  fans on, power button flashing says "not enough RAM that works correctly for starting up".