HP n208tx... headphone microphone combo does not recognize mic

When I try to connect any headset combo hp having even taken for headset and microphone both... the laptop recognizes no sound speak into the microphone. but I can hear songs in the helmet. Any solution?

Hi ujjwal258518, welcome to the Forums of HP. I understand that your microphone does not work in your combined port. Unfortunately, it behaves as expected. The combo Harbour will not work with the only micro devices, it must be part of a communications headset/microphone device. The other possibility is to get a USB microphone.

As described in the user guide: "If you get a microphone/headset device, make sure that the power cable of the unit has a connector 4 pin that supports audio output (headphone) and audio (microphone)."

Page 6 shows the right side. Section 3 describes the combo Harbour: User Guide

I hope this helps.

Tags: Notebooks

Similar Questions

  • New HP Pavilion Slimline, does not recognize mic in the webcam.

    It recognizes the webcam as a Visual device, but does not have a microphone. What is the problem/how fix this?

    Nkmatt, welcome to the forum.

    I have a Microsoft LifeCam Cinema. I had the same problem. I had the video, but no sound. I went into the Setup program for the cam. It has been configured to recognize another audio device. I changed it to the LifeCam and it worked perfectly.

  • Satellite L750 does not recognize an external microphone

    My laptop does not recognize any external audio input device plugged into the mic port.

    I have a Satellite L750 running Windows 7 with the Conexant HD Audio Smart.

    I want to record using external mixer. I am connect the output of the bureau in the 3.5 mm microphone port, but it seems that it is still just using the internal mic.

    When I go into the sound properties, under the recording tab, it is only the internal mic. There is no option for an external mic.

    I tried updating the driver for sound card, remove the card driver sound and re - install, check all the properties under sound properties, but there is no option for the external microphone.

    I tried Googling the problem but nobody seems to have a viable solution.

    Please can someone help me get the laptop to recognize an external mic.

    > I want to record using external mixer. I am connect the output of the bureau in the 3.5 mm microphone port, but it seems that it is still just using the internal microphone

    Start a test: take an external microphone, connect it to the laptop and use a Windows 7 Audio Recorder utility (can be found in all programs-> Accessories) to record an audio sample.

    Is this possible?

    I think that the microphone that appears in the control-> audio-> recording tab panel is the external microphone jack.
    You can also click right in the recording tab and must mark the options: show disconnected devices and devices to see the disabled.

    By the way: find an old thread you created here on the similar theme:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=69099
    I advise to use only a single thread to continue the discussions.

  • Y560, Windows does not recognize the built-in microphone

    I don't know why but Win7 does not recognize the microphone integrated my Y560! all of the peripheral associated sounds work perfectly, but it is mentioned "no signal installed audio deviced" in recording devices! scanning for hardware in the Device Manager changes did not help.

    Is there a solution?

    Take a look at this thread

  • My computer does not recognize plugged on headphones

    Why my computer does not recognize that my headphones are plugged into the front of my computer?  When I run the diagnosis of Windows 7, it says that are not plugged my headphones.

    Original post: Pls help, I'll love you forever! : )

    Tuesday, February 14, 2012, 21:58:26 + 0000, smlunatick wrote:

    It is not a normal process to have a headset before jack in Windows.

    Right, before headset decision-making has nothing to do with Windows. If you
    do it, it's a characteristic of the species.

    I have it on my case.

    Ken Blake, Microsoft MVP

  • Does not recognize devices more

    I have OS X El Capitan, 10.11.3 Version.

    Since a few days, my Mac does not recognize my printer more (even if it is properly connected, says 'offline'). I can print from my iPhone / iPad via the network, but not my Mac!

    And from today, even my Mac does not recognize my external, connected sound card USB.

    I wouldn't change a thing, but my Mac doesn' recognize my hardware.

    Help!

    Try this:

    Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

    MacIntel: Reset of the controller (SMC) system management

    Reset the PRAM and NVRAM on your Mac.

    Repair the hard drive and permissions - El Capitan

    HD recovery start:

    Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

    Repair

    When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

    Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.

  • Satellite Pro L850 - 1 P 8: Assistant BT does not recognize Atheros AR946x

    The Bluetooth Wizard does not recognize the Atheros AR946x as a Bluetooth device and asked me to plug in the bluetooth device.

    I have had this machine in may 2013 and so far have not needed to use bluetooth.
    I downloaded the latest driver for NETWORK card.

    The wireless ethernet feature works perfectly.
    Also how do in BIOS on start up I tried key usual strokes F1 F12 0 del and ins, but nothing works

    Hello

    As far as I know, that it is a combo of Wlan/BT card.
    A module sharing feature Wlan and BT.
    Additional driver must be installed.

    I assume you are using Win 7 Professional as this system seems to be installed by Toshiba.
    First install the driver Atheros WLan, suite by packet filter for driver Atheros BT and battery Toshiba BT. Finally to finish installing BT, activate BT using the function key.

    Welcome them

  • Satellite A100 does not recognize the new CD/DVD drive

    I bought a new CD/DVD drive for my A-100 of Toshiba Satellite age of four year old went crazy and wouldn't work.

    Unfortunately, I bought a DVD of Toshiba Portege A100 / reader Combo CD - RW that is not exactly what I had before the jump that it will still work.

    Unfortunately, I'm surprised because it does not recognize the CD/DVD drive at all: /...
    It seems to work, and the light blinks I think that it is not broken.

    I just plugged it because that's the way I was told to do.
    I need to download the drivers to operate?
    It will work on my laptop, or is it a "most recent" CD player that will not work with my laptop?

    I'd appreciate any help. THX

    The BIOS does not recognize this new CURIOUS because the player seems not to be fully compatible.
    I think there bad master/slave/c-salt settings

    As you know these settings can be changed on the external CD/DVD drive for desktop switching jumper. But it is not possible for computers portable CD/DVD players.

    You can solve it only purchase a new compatible disc.

    Usually the ASP in your country could help you buy this disc of these guys here
    However, you can consult the user manual if there are a few details on the compatible sides.
    My user manual provides this information.

  • Media Center in Windows 7 64 bit does not recognize AVerMedia HD DVR

    I try to use an AVerMedia HD DVR (C027) with my COX Cable HD decoder, but Media Center does not recognize as a tuner.  I had to go back to an AVerTV Combo PCIe (M780) and use the S - video input.  Of course, I lost the HD!  Help!

    Have you installed the driver?

    Otherwise, visit the manufacturer's Web site and download and install the latest compatible tv tuner driver.

    Do you find the tuner in Device Manager?

    Start > in the start search box type:devmgmt.msc and press the Enter key.

    Scroll down to sound, video and game controllers, under him do you find AverMedia HD DVR?

    S.Sengupta Media Center MVP

  • On Toshiba M505-S4940 computer microphone laptop does not work after upgrade Windows 7...

    I bought this laptop in July and it came with a free upgrade to Windows 7. Until I upgraded my cell phone, my microphone worked fine, but since I installed Windows 7, the computer does not recognize the microphone as a device. I looked for answers on the Web from Toshiba site, but nothing has worked. What is the problem with my microphone?

    Hi jillibeans34,

    Thanks for posting. Here is a link to the drivers of Toshiba. Download the sound and drivers of Toshiba Speech system. If you're still having problems, please contact Toshiba to see if they can provide you with the correct drivers.

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=SB&OS=&category=&MOID=2346345&RPN=PSMG2U&modelFilter=M505-S4940&selCategory=3&selFamily=1073768663

    I hope this helps!
    Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Laptop does not recognize the usb mouse or the internal speakers.

    The laptop does not recognize the USB mouse. I have re installed the drivers from the site of the constructor (HP), but it still does not work.

    In addition, the internal Laptop speakers no longer work. There is no sound coming out of the laptop and it does not recognize the external headphones plugged into the headphone jack.

    I ran several troubleshooting utilities (audio playback, FixIt) and they are no help.

    Hello

    Thank you for keeping us posted.

    Sorry for the late reply.

    I imagine the inconvenience that you are experiencing. However, I appreciate your efforts to resolve the issue.

    I would suggest trying the following methods and check if it helps.

    Method 1:

    How to use the tool File Checker system to repair missing or corrupted system files,

    Please follow the steps in the link provided below.

    https://support.Microsoft.com/kb/929833?WA=wsignin1.0

    Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how to run the system (SFC.exe) to File Checker tool analyzes your system files and to repair the system missing or corrupt files in Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

    If the problem persists, follow method 2

    Method 2:

    Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft, security scanner please follow the steps in the link provided below.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.   

         

    If the problem persists, follow method 3

    Method 3:

    I suggest you try the steps from the following link and check if it works.

    No sound in Windows.

    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    For the problem with the USB mouse, there could be a possibility that there is a conflict of material with the mouse.

    I suggest you to try some other USB mouse with the laptop and check if it works.

    I hope this information is useful.

    Please let us know if you need more help, we will be happy to help you.

  • Premiere Pro CC 2015 does not recognize my 4 AJA Kona card

    Hello world

    Premiere Pro CC 2015 does not recognize my 4 AJA Kona card.  Here are the specs:

    Computer:

    Mac Pro 2013 (trash)

    OS: 10.10.5

    Map:

    AJA Kona 3 G + 4 e/s

    Installed in mercure Helios via Thunderbolt

    I can capture in the AJA control room, the computer recognizes the card and my Mac Pro towers plays very well with the first CC 2015 + combo 4 Kona.

    What I did to solve problems:

    -Replace the mercure Helios with mercure Helios 2

    -Replace cable Thunderbolt

    -Ports exchanged

    -J' tried CC 2014

    -Restarted

    -Standing on one foot...

    Any help would be appreciated!

    Hi Vinay,

    What has ended up having to happen was 12.3 UN-installing, installation of 10.6.1, can upgrade to 12.3.  Just solved!  Thank you

    jZ

  • DVD burner does not recognize blank DVDs, but will recognize blank CD?

    I read through several similar messages, but none seem to have a solution to my problem.  I'm NOT very technically savvy, so this is as much I know:

    I have a Dimension E310

    It was supposed to come with a cd burner and a dvd burner combo.

    The reader says DVD R/RW RW DVD rewritable Compact Disk its Ultra Speed

    I was able to successfully burn CDs from itunes, but have not been able to burn any kind of video file.  In fact, when I insert a blank dvd in the drive, the computer does not recognize that everything is there.

    As I said, I'm not the person most computer savvy in the world.  I know how to work with my applications, but I know little about the way in which a computer is set up, so I apologize in advance if my question is ignorant, but I appreciate any help you can give.  Thank you in advance.


  • 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

    13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • iTunes on pc does not recognize my iphone. the pc does. the iphone asks me to allow access to what I do

    iTunes on pc does not recognize my iphone. the pc does. the iphone asks me to allow access to what I do

    Hello

    Check this help page: If iTunes does not your iPad, iPhone or iPod - Apple Support

Maybe you are looking for

  • How to do a clean install of El Capitan on new ssd?

    I bought a new SSD to replace the SATA drive in my Macbook Pro for mid-2010. I am running Yosemite. What I want to do, is to do a clean install of El Capitan on the SSD. I also bought a pregnant and plan on the use of the old drive as an external bac

  • XControls not found in the Project Explorer

    In accordance with the LABVIEW help section create you an XControl by go to your project and in the project, right click on Explorer window workstation and select new' XControl in the context menu. The problem is that it is not available in my menu.

  • Server Windows 2012

    Hello I have a little problem and I don't know how to fix it, please help me. I want to set up a file/print. I installed Windows Server 2012 Standard on a HP micro server, and this is my problem. I can't see the server on the network. The rest of the

  • HP pavilion 15 notebook pc: Bios password

    I have a laptop HP Pavilion 15 15-e016nr and I forgot the password of the bios that I put on the computer. Its asking me an administrator password or power on password. Disabled system code number is 51904512. Can you please help me. Thanks in advanc

  • Impossible to update, get the error code 0 x 80240009

    What is this code? my system updates any more.