HP Notebook PC 15: create the system for Win10 64-bit recovery

Similar Questions

• M3800 Precision how to create the system for windows recovery disc 7 without cd player

  Precision M3800 does not come with CD player. How can I create rescue disk to restore the system or system to go back to a restore point?

  Chris Chan

  CD/DVD media is a thing of the past, you must use Dell Backup and Recovery to a 16 GB Bootable USB Flash Drive:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery-1-8-1-71/

• Getting the error "the device reported unexpected or invalid data for a command. (oxC0AA02FF) when you try to create the system repair disc

  original title: error 0xC0AA02FF

  I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:

  "The device reported unexpected or invalid data for a command.  (oxC0AA02FF)

  Hello

  What method did you follow to create the system repair disc?

  I suggest you to create the system with different USB repair disc and check if it helps.

  Means all try the methods and check them off below if it helps.

  Method 1:

  Try to put the computer in a clean boot state, and then check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose a small amount of data while performing the check disk.

  I also inform you that the data on the USB key will be lost. You should take a backup.

  You can also check with the reference article below:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

• 2 VDR "impossible to create the snapshot for < system >, error-3960 (cannot suspend virtual machine).

  We test VDR on our ESXi 4.1.0 cluster 381591 and we have a few backups to a test Windows 2003 server and a Linux server and they backed up fine. We have a backup of a Windows 7 computer virtual test and we had a bunch of these errors...

  Failed to create the snapshot for systemname, error-3960 (can not suspend virtual machine)

  Which is strange because I can go in vSphere client and manually create a snapshot and remove without problem. Any ideas on why this is happening?

  Thank you

  You can try to set the 'disk. EnableUUID' to 'false '.

  Look here:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1031298

  Paul

• Failure of the system for Windows 8 image backup

  I downloaded Windows 8 a few days ago. I tried to create a system image to an external drive, Western Digital 500 GB (409 GB free) four times and each time after a few minutes a message said that the backup failed. The backup of the recovery Partition seems end OK every time. The failures occurred after a minute or two in the backup of the C: drive of the OS.

  The external hard drive checked OK. The player has already had an image of the system for Windows 7 which was removed before the backup attempt. Here are 2 messages I received as the backup failed. The other 2 were much the same, I think.

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The mounted backup volume is inaccessible. Try the operation again. (0X8078004F)."

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The specified drive is not found. (0 X 80780081)"

  Below are the 2 files on the external hard drive after the failure. I guess that the first was the complete recovery Partition backup. I don't know much about this sort of thing.

  7da23344-ab79-11e1-887d-806e6f6e6963.vhdx - 7.61 GB
  7da23345-ab79-11e1-887d-806e6f6e6963.vhdx - 7.00 MB

  Anyone have any ideas on the problem? The software only virus on the PC is Windows Defender that came with the operating system.

  Fifth time is a charm, I suppose. I tried saving image system for the fifth time and successfully completed this time. Nothing has changed on my system or readers.

• Create the system of production test env

  Hello
  
  
  
  Please sorry,
  
  I am new to this area of the Oracle 11.5.10 Applications and I need help with a couple of questions.
  
  We have the production system with some Applications Oracle 11.5.10, level APPS on server 32-bit Red Hat Linux 4 EA and 10.2.0.3 DB Server 64-bit Red Hat Linux 4 EA level.
  
  
  
  We get 2 new servers to test environment Applications Oracle 11.5.10 with the same versions of the operating system as the production.
  
  First test 32-bit applications.
  
  Second test 64 bit for DB level.
  
  
  
  Now we create the test environment, even as production.
  
  
  
  Questions >
  
  
  
  (1) what is the best way to create env even in this situation (application layer 32-bit, 64-bit database layer). I suppose that cloning using the quick clone procedure is not possible on this clear machines.
  
  
  
  (2) if I need to install software Applications Oracle 11.5.10 first on both machines, is it possible to use 32-bit rapidwiz Installer (which exist in the scene) to create test db level on this 64-bit node, or not.
  
  I read in the paper to Oracle 11.5.10 Applications - Notes of Update Installation for Linux x 86
  
  
  
  You can install the Oracle Applications on a server of architecture x 86-64 if the 32-bit Windows or Linux operating system. If your 64-bit operating system, contact your operating system vendor to obtain a 32-bit operating system before you install the Oracle Applications.
  
  
  
  (3) how now what stage production is created. When I try to create the stage for my test environment using perl perl /mnt/cdrom/Disk1/rapidwiz/adautostg.pl command
  
  I get these options:
  
  
  
  1 - choose the Oracle Applications
  
  2 - choose the Oracle Applications with NLS
  
  3. choose the Oracle database (RDBMS) technology environment
  
  4 choose Oracle Database Applications (databases)
  
  5 - choose the technological environment Oracle Applications (Tools)
  
  6 choose APPL_TOP
  
  7 - choose language Support NLS (National Language)
  
  
  
  Because I've not seen directory oraNLS is this 1 good choose for the scene.
  
  
  
  Thank you and sorry because I'm new in this field.
  
  
  
  Concerning
  
  Published by: user12009428 on Sep 30, 2010 12:12

  Hello

  Please tell me what are the documents to follow to do this action correctly.

  For quick Clone, see doc 11i rapid Clone that is referenced in (fundraising Documentation quick Clone, version 11i and 12 [799735.1 ID])--> cloning Oracle Applications Release 11i with rapid Clone [230672.1 ID]

  What about prerequisites, on both nodes?

  You should find all the pre - req software. and packages in these docs.

  Note: 316806.1 - Oracle Applications Installation update Notes, Release 11i (11.5.10.2)
  Note: 294932,1 - recommendations for install of Oracle 11i Applications
  Note: 343431,1 - required to install Oracle 10 g RDBMS on RHEL 4 x 86 platform 2
  Note: 169706.1 - database Oracle on Unix AIX, HP - UX, Linux, Mac OS X, Solaris, Tru64 Unix Installation of operating systems and Configuration requirements checklist (8.0.5 to 11.2)

  Thank you
  Hussein

• Silverlight doesn't run - 'lack of some components of the system for the automatic updates'

  I just installed Silverlight, but when I tried it, the next run messageappeared 'Lack of some components of the system for the automatic updates'. I logged on the microsoft page, but here I didn't know what to do?

  Thanks for your help.
  Rose

  Hi RoseMaryInes,

  The question you have posted is related to Silverlight and would be better suited in the Silverlight forums:

  http://forums.Silverlight.NET/forums/

  Please visit this link to find a community that will support what ask you

  Thank you for visiting the Microsoft answers community.

• How can I perform a recovery of the system for a mini HP?

  Original title: System Recovery.

  How can I perform a recovery of the system for a hp mini?

  Hi waynemeyer,.

  1. why you want to make a system restore?

  2. you have a question about your computer?

  3. you have installed on your computer Recovery Console?

  If you try to restore the factory settings, you will need to contact the manufacturer of the computer for help.

  Contact HP

  Hope the helps of information.
  Please post back and we do know.

• Best practices for storing the Logs of the system for all newly improved ESXi hosts?

  Hi people,

  What are the options and best practices for the Logs of the system for all newly improved 5.1u1 ESXi hosts?

  Do I need to have the Syslog server or it can be safely ignored?

  Thank you

  Evening,

  Syslog is preferred, but VMware has provided a collector of syslog on the vcenter installation disc can be installed on any windows host or your vcenter. I can't count the number of times where I had guests CMTF or newspapers lost... Fortunately for the syslog which collects up to the accident.  It is not necessary, but it's really a good idea without any real cost since you can use your vcenter host.

  Here is an article on how to install it:

  Set up Syslog ESXi collector | VMware vSphere Blog - VMware Blogs

  Thank you

• I signed up for 30 day trial and I just got a notification if the trial ended. I did not use the system for more than 30 minutes.

  I signed up for a 30 day trial and I just got a notification if the trial ended. I did not use the system for more than 30 minutes.

  http://helpx.Adobe.com/x-productkb/global/trial-software-expired-early.html

• What is the best way to create the layout for a single page website in Adobe Muse?

  I was wondering the best way to create the layout for a single page website in Adobe Muse. Does anyone have any suggestions?

  You can have access to this tutorial (and their other) a month for only $9.99. Is it too expensive for you!

• I want to create the function for the function create for ODD or EVEN (NUMBER)

  I want to create the function for the function create for ODD or EVEN (NUMBER) also
  If number is odd, multiply by 5
  If there is an even number, multiply it by 10;

  Not tested,

  create or replace function fnc_env_odd(p_number in number)
  return number as
  begin
   if p_number>0  -- Remove if you want to consider negative numbers also
     if mod(p_number,2)=0 --Means even
        return p_number*10;
     else                 --Means odd
        return p_number*5
     end if;
   end if;
  end;
  /
  

  G.

• Download the system windows 7 64 bit repair disc

  can I use my windows HP 10 PC to download the system windows 7 64 bit repair disc. If so, HOW.

  Hello

  If you need to repair disks - these help repair Windows not re-install.
  Often, these records will help when the OEM recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs. (It can be done on any computer running XP,
  Vista or Windows 7 which has a CD/DVD burner).
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How create a Windows 7 system - free repair disc (must be made on a
  Windows 7 computer running the same 32-bit or 64-bit).
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  
  An installation disc is possible also to use for repair. Of course you would
  Use your own COST (product key).

  How to: What are my options for Windows 7 reinstall media?
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

  Welcome to the recovery of Microsoft software
  http://www.Microsoft.com/en-us/software-recovery

  See MVP Andre Da Costa message in this thread.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-can-i-download-gatewaywindows7recovery-disc/3c0ecd74-CFC1-4188-89c7-a6bbe8113ee1

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• could not find the drivers for window7 32 bit 15-d018TU hp

  Dear Sir, I recently bought 15-d018TU with window 8.

  I installed 32 bit Windows 7.

  but I could not find the drivers for window7 32 bit.

  I need drivers now

  1 network cards

  Bluetooth 2 controller

  3 network controller

  4 PCI simple communication controller

  5 SM bus controller

  USB 6 bus controllers

  7 Ethernet controller

  Hello:

  You should be able to use all the W7 32-bit drivers and software from the HP Probook 450 G0 on your model, except the audio.

  Your model uses the Intel HD graphics driver.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4052%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Audio: Accept the agreement.  Download and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• Can we (re) define the colorbox for any 16-bit output?

  Dear users,

  can we (re) define the colorbox for any 16-bit output? Currently, the colobox out U32.

  See you soon,.