HP officeject j4580: PLEASEE HELP. Printer connected to the laptop

Similar Questions

• Wireless printer connects to the laptop, even though she has worked in the past.

  My printer HP Officejet 6700 Premium connects to my laptop HP Pavilion 15, although he has worked in the past. Other computers around the House connect to the printer and print documents without any problems. When I go to print from Microsoft Word, it says my printer as offline.

  I tried to remove the printer from my devices and printers list (so that I could try to reconnect the printer), but he is not leaving the list after clicking "remove hardware".

  Could someone help me please you troubleshooting? I really need to be able to resume printing my documents for the school.

  Thank you!

  Hi @OfTheFalls

  I'd love to help you reconnect your 6700 printer and computer.

  I suggest using the HP print and Scan doctor first of all, it can solve many printing and scanning errors, network or USB problems, driver problems and conflicts of port connection. Click here to download and run the print and Scan Doctor >www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks ( ), the tool did not find any problem.

• Canon printer connects to the laptop

  I am trying to print and I get an error message 'the printer is unresponsive. I went through the printer and it is connected to my network. I followed the advice of the site Web of Cannon and he eventually tell me that there is a firewall issue that will not allow my printer and my computer to connect. I've updated all the downloads for my printer. How to bypass the firewall to allow my computer and printer communicate?

  Hello

  If this isn't a driver problem there is a problem of setting or material and you
  need to contact Canon. More information about the settings of firewall in the last section
  below if this can actually be a driver problem.

  As Canon OEM is responsible for the good operation of the printer and their
  drivers provided. Check with Canon support, online documentation, and
  drivers.

  Good luck, you need to update or reinstall the latest driver.

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Support - contact us
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  Canon printer - page local confirmation - could be from another region.
  http://pdisp01.c-WSS.com/OS/

  ====================================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  ===================================================

  How to manage the firewall of Windows 7.
  http://www.thewindowsclub.com/how-to-manage-Windows-7-firewall

  How to use Windows Firewall with advanced security in Vista (also Windows 7)
  http://www.Vistax64.com/tutorials/92748-Windows-Firewall-Advanced-Security.html

  What's new in the Windows 7 firewall?
  http://www.windowsecurity.com/articles/whats-new-Windows-7-firewall.html

  How do I add or remove a Windows Firewall Exception in Windows 7
  http://www.SevenForums.com/tutorials/542-Windows-Firewall-Add-Remove-exception.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• SE message: printer not detected, the printer connected to the wireless modem and I can't print

  Original title: printer connected to the WiFi modem and pc but get message saying unable to print printer not detecded

  printer not detected on pc but it is installed and signel wirless right message bed printer not detected

  Hi howard douglas.

  1. were you able to print before without any problem?

  2. when the problem started?

  You can try to connect the printer directly to the computer and check what is happening.

  Check out the link:

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Epson XP200 not to connect to the laptop. Printer works fine by itself.

  A new Epson XP200 connects to the laptop. Printer works fine by itself.

  From Internet Explorer

  Original title: connection

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• How to get my printer connected to my laptop wireless

  I'm trying to get my printer wireless connected to my laptop.  I clicked on "Add a printer" and then when the next screen poplulates with all models of printer, I clicked on HP.  When I go and try to find my printer model # (Photosmart Plus B210 series) I find that this model does not appear in the list.  How can I get my printer connected to my laptop?

  See this:

  http://h10032.www1.HP.com/CTG/manual/c02456532.PDF

  It's under the connectivity

• Aspire One D255E don't look for a printer connected to the USB port

  My D255E an Aspire don't look for a printer connected to the USB port.  I've never used a printer on this computer before.  Windows 7 Starter will support a printer?

  It should be.  Try these steps and results reports:

  When you turn on and connect the printer via USB, shows tasks for animation in the system tray at the right end of the bar, click it and monitor driver installation.  If the pilot goes then printer must print and perhaps scanning of base via the Windows fax and scanning utility.  To find such a piece of utility type its name in the search box.

  If the driver does not load type of devices and printers in the box to start the search, open it, check if printer is already displayed, right-click on it to open the properties, and try to print a Test page. If it does not print right click on printer again to solve problems.

  If the printer is not listed visit Support downloads of the printer Web page to download and install the base driver.  If a wireless printer, you will need the complete package to do it fully implemented.  If you want to be able to scan from the top of the printer to the PC, then you also need the full package.  Keep track of the configuration screens when you install the software.

  If you still have problems after return the exact error with photos if possible.

• HPC8180 printer connects to the wireless network, after upgrade firmware to the router wireless

  My HPC8180 has been wireless since I bought it some time ago.  I recently had to upgrade the firmware on my router wireless of Netcom NB9W and since then my HP will not solve for the wireless network.

  I run the wizzard of wireless network on the printer, select the correct SSID and enter the WEP key according to the instructions.

  It will then not connect.

  Print the summary I have says that it passes all except:

  No filtering = Fail

  Connected = do not run

  Signal strength = very weak (which is strange because it is about 10 feet away from wireless router).

  Other networks detected matching your network name (SSID) = No.

  Summary says:

  Network Name (SSID) altnet (correct)

  Address IP = not applicable

  Configuration source = not applicable

  Communication mode = Infrastructure

  Authentication type = open system

  = 64-bit WEP encryption

  I have NOT activated the mac address filtering

  Any ideas?

  Your router appears to be a DSL modem-router.  Those who can be difficult to connect to.  In addition, WEP can be problematic and is no longer a measure of security.  WEP can be broken in 10 minutes approximately with the freeware on the internet.

  We will do three things:

  1. replace the WPA or WPA2 encryption.  You can make your own password.  Do 13 or more characters, numbers and uppercase and lowercase letters.

  2 reset the default settings on your printer network (configuration > network area).

  3. attach to the router in this way:

  Sometimes the DSL providers have more control over the router like the printer.

  -Unplug the phone line from the router
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the device (wireless configuration wizard)
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address).
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the white gateway and DNS
  -Finally, connect the telephone line, restart the router and the test.

• Unable to connect to the laptop, receive error message "the user profile service failed.

  can not connect to the computer

  * original title - I can't connect on the laptop when I put in password says the USER PROFILE SERVICE FAILED THE LAGOON AND DO CAN NOT BE LOADED a *.

  Hi vincentbyrne

  
  What operating system is installed on the computer?

  You can refer to the link below and use the provided steps to identify the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  
  If you are using Windows Vista or Windows 7 based computer you can see Microsoft article provided below and check if the measures help -.

  http://support.Microsoft.com/kb/947215

   

  I hope this helps.

• Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

  Hello team,

  Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

  Thanks for help

  LookAtLAN network monitoring is one of these tools.

  SuperScan is probably better, but I have not tried.

• Wireless cause: the network connection from the laptop to the router, but internet access comes and goes through procedures to 'fix '.

  The Dell laptop I bought is little used, not refurbished a downsizing Corporation.  I bought a refurbished by Cisco, Cisco Linksys router.  I can't stay on the internet for any period of time.  At the time that I open the browser, after the wireless connection, it goes your 'connected' to 'no internet access.  If I go through the diagnosis and fix it, it says I'm connected, but 'no Internet' returns quickly.  It shows a diagram of the connectivity of the laptop to the router but not to the internet router.  I had a second router refurb sent, and it does the same thing.

  This is all new to me (wireless and mobile), so my words my being turned off, but I wonder if it might be the wireless card, or network card (or is it just a different name for the router).  I mean, it's something in the laptop.  If I plug the DSL directly into the laptop, I have a perfect internet connection, so I did not thing is my provider.

  Any help/suggestions appreciated!

  My issue was with the ATT modem not set to fill mode.  modem was not accept what he said was the router.

• My connection to the laptop for Sharp AQUOS HDTV stop work-"not compatible with this signal.

  My connection to the laptop for Sharp AQUOS HDTV stop work-"not compatible with this signal.

  Hello Bonnie,.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your laptop?

  Thank you for details on the issue.

  I also know that the inconvenience that you are experiencing due to connection HDTV problem. I will definitely help you.

  This problem may occur because of corrupted device drivers or incorrect device settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  If this does not help, use method 2.

  Method 2:
  Please refer to the suggestions of Aziz N replied on September 8, 2010 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/i-get-a-message-not-compatible-with-this-signal/206d6023-a7a2-4DC9-bc3a-01d382a3acbd

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• IPad no charging current after the update to IOS 10, when connected to the laptop.

  My Ipad no charging current after the update to IOS 10, when connected to the laptop. But fine load with Bank charger or battery with the same cable brightening.

  PL suggest how to overcome this problem.

  Have a look here If your iPhone, iPad or iPod touch won't charge - Apple Support

• With the help of Vista on the laptop. Receive 3 updates on initialize to the top & stop. Do not install. Party at 3 x through process 80070002. How to fix?

  With the help of Vista on the laptop. Receive 3 updates on initialize to the top & stop.  Do not install.  Party at 3 x through process 80070002. How to fix?  3 updates failed to install: KB2779562, KB2705219 and KB2722913.  Constantly configures updates during startup and shutdown.  Takes a long time for the two workers.  Can anyone give advice?

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and 80070002 in C:\Windows\Windowsupdate.log.

• Resolution is lower when the monitor is connected to the laptop

  Recently, I knew that my laptop of girlfriends who is a Dell XPS streched to the office and the max resolution is 1280 x 1024, what happened during the night. The resolution used to go up to 1680 x 1050.

  The stretching occurs only when its acer monitor is connected to the laptop. When disconnect us the laptop resolution is up to 1900 x 1200 (finally something like that).

  Operating system is windows 7 x 64.  I have the exact same monitor works fine on a windows Vista on a Dell XPS.

  Anyone know what to do about it?

  
  

  Best regards Sune

  Well, I have the same problem with my lcd... and I discovered that this is due to the ability of the tv... or the screen, your laptop have a high native resolution but perhaps the native resolution of your screen is less than I say 1360 x 768... by that your pc or laptop detects the monitor and adapt to... but this will give you a No 4 k true HD display.