HP Officejet 4355 printer suddenly start very slow printing! HP technician advice needed!

Similar Questions

• My MacBook Pro suddenly becomes very slow, accepting orders very slow how to check if the ram is working properly

  My MacBook Pro suddenly becomes very slow, accepting orders very slow how to check if the ram is working properly

  You can try this download.   Etrecheck.   https://etrecheck.com/#about

  Then publish the report as a reply in this thread.

  It will allow us to review your system without disclosing a private matter.

• My MacBook suddenly started working slow

  Hello! I got my MacBook Pro since 2012 and it suddenly started running slow. I rebooted several times. Also, I deleted some files, but it does not work perfectly. I noticed that when I start watching the video in my MacBook, it will stop so many times. In addition, when I search in Safari and do whatever it is, the system is slow and the MacBook is going to be so warm. Yesterday I used the application disk utility and test diagnostic equipment, but these processes did not affect the system of my MacBook. I'm trying anything possible to fix this myself before I take it to the repair shop and spend money on something that I could have probably staring at me.

  Here is some information on my MacBook

  MacBook Pro (13 inch, late 2011)

  2.8 GHZ Intel Core i7 processor

  4 GB 1333 MHz DDR3 memory

  MacBook Pro, OS X EL CAPITAN, 10.11.3 version

  Run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select 'open '.

  Select a problem from the menu popup box "Choose a problem", then "Start EtreCheck" in the dialog box.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• My MacBook suddenly started running slow

  Reading this thread: my MacBook suddenly started running slow

  I followed the instructions of Linc Davis to post the following are produced by the Terminal application and using the command:

  syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|find tok|n Cause: -' | tail | open -ef

  The following text has been updated with the door...

  Jan 29 06:47:19 core Mason-MacBook-Pro [0] : cause of previous stop:-60

  30 Jan 10:01: 18 localhost kernel [0] : cause of previous stop:-60

  30 Jan 10:19: 49 kernel Michael-MacBook-Pro [0] : SSanadnbdobxox: Sandboxmdmwdowrokrekre (r(: 38838) 5md woden) YY (d1e) n (f1) I i/oAns/ppClialceatindar.apop/Cns/onCatelnentdasrer d/Ap-daplticaat lef-irleea-dr-edaatark. () / Mapp/acO38S/CCona7) lteentn sd/MaacOrS /.

  30 Jan 10:19: 57 kernel Michael-MacBook-Pro [0] : SSaandndbobox: x: mmdwodrwkeorkrer ((385387)) dendeyny ((1) 1) fifillee-read-r-dateaad-d/Aatppal ination/Applionscati/oGansme /GaCentme er. Capenp/Contetern.ats/pMacpOS

  Jan 30 22:52:48 core Mason-MacBook-Pro [0] : nspace-Manager-unlock: found no token 11211

  3 Feb 07:16:39 localhost kernel [0] : cause of previous stop:-60

  There was several abnormal stoppages in the last days. A negative stop code may indicate a hardware problem. The precise meaning of the codes is not publicly documented.

  If you haven't already done so, you can try to reset the system management controller. Otherwise, or if the reset has no effect, see below.

  Do a 'genius' one appointment at an Apple Store, or select another authorized service provider. You may need to leave the machine there for several days.

  Back up the data on the internal disks before you turn on your computer to anyone. There are ways to back up a computer that is not fully functional - ask if you need advice.

  If privacy is a concern, delete the partitions of data with the ability to write zeros * (do it only if you have at least two backups complete, independent, and you know how to restore on a blank disc from any one of them.) Do not delete the recovery partition, if it is present.

  Keep your confidential data safe during the repair of the equipment

  Apple recommends that you remove permission to a device in the iTunes store before serving.

  * One SSD has no need to be set to zero.

• HP Officejet 5510xi all-in-one: very slow printing

  My printer takes forever to print a single page.  I got faaster to work at some point, but do not remember how and now it is not printing normally again.

  Welcome to the @Mary6268forums.

  I read your post on the matter of slow printing, you face your Windows 8.1 system when printing to your Officejet 5510xi. I have a few ideas in mind below for you to check and try, and I hope they help!

  1 be able to reset the printer:

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  2. run the print and scan the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  3. copy of test. Copies also produce very slow?

  4. print from Notepad. The tests also slowly produce here?

  Let me know the results

• Satellite Pro M10 suddenly ran very slow and freezes

  Two weeks ago, that my SP M10 is suddenly very slow and freeze. After a reset, it began to check the HARD drive, which lasted about 8 hours, and several repair lost clusters to files. But the student pilot did not run faster. I reformatted the HDD to FAT32 (NTFS has not worked) and reinstalled Windows XP. First, it seemed to work very well, but a few hours later, it freezes again.

  After 10-20 min, I got access. This has not changed so far. CHKDSK another also lasted several hours and again showed some lost clusters. I think that my HARD drive is damaged, but how can I see if there a lot of bad sectors? Can I fix it? Can I possibly replace my 40 GB HARD drive with a larger HARD drive capacity?

  Are there restrictions or can I use any brand?

  Hello

  I had the same problem with my Satellite 1900. The result was the HARD drive damaged (bad sectors). I tried to fix it with different tools, but without success. The best solution is to swap the HARD drive.

  Good bye

• Satellite A40-151 started very slow and have hours to transfer a single file

  Hello.

  I've had my A40-151 more than two years now, and up to last month, I got no problems at all. However, last month, it began to be very slow and took hours to initialize. I'm worried that I would lose all the data that I didn't back up, and so I bought an external drive to transfer data.

  As I was doing this, my laptop started making grinding noises, and it took up to 12 hours to transfer a single file. I got to the place, I bought it, and they said it had crashed and that it was not something they could do other than get it back - and so I lost all my data.

  When I came back, it was OK for a few hours and then started grinding again! And I think it might be something to do with the CD/DVD drive. I uninstalled the drive, and the squeaking seems to have stopped as long as the "drawer" player is open! Help, please!

  How can I get the drive replaced? My laptop is no longer under warranty. No I lost everything this that data for nothing?

  Anyone have any ideas?

  Hello

  No, the squeaking is probably from the reader of CD/DVD being dry, while optical rides on squeak track passing. But the long loading is certainly a hard drive problem. Looks like a head crash. The head is more or less what locates and reads/writes data from the HARD drive. When this plant it is unable to read/write/or locate the data on the surface taking more and more to save the data, transfer data and load the operating system. Two problems independent of each other. If your ASP cannot repair the cd that squeaks, then they can replace it one that works normally. I hope this has helped you.

• hp officejet 4355 printer problem

  Hello. I have a printer hp officejet 4355. I don't have the manual and I have a problem with the cartridge. When I plug it, it says there is a cartridge error and advises me to check the user's manual. but as I said, I don't have it. What should I do? Meanwhile, I don't know if there is enough ink in the cartridges. Thanks for help.

  Hi Kayyan,

  I suggest you to consult the steps mentioned in the article of the assistance provided in the forums of HP.

  HP officejet 4355 all in one. Cartridge error, refer to device documentation to troubleshoot.

  http://h30434.www3.HP.com/T5/other-printing-questions/HP-OfficeJet-4355-all-in-one-cartridge-error-refer-to-device/TD-p/2157661

  Alternatively, you can refer to this article for more information.

  Mistakes print cartridge

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bpa00299&tmp_task=solveCategory&cc=us&DLC=en&JumpID=reg_R1002_USEN&LC=en&product=351109

  You can also download the guide to use this article.

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&DLC=en&document=&product=1138373

  If you have any other questions about the issue, you can view the query in the HP support forums.

  http://h30434.www3.HP.com/T5/other-printing-questions/BD-p/printing

  Hope this information helps. Response with status so that we can help you.

• OfficeJet Pro 8600, Windows XP, very slow to print scanned pdf

  All other prints exception scanned to PDF print normal PCDFS, even imported e-mail, etc., all other types of files.

  Problem occurred after problems with XP, computer tech could rectify not so copied all files and reinstalled XP, no problem with XP, but the printing problem now with my own scanned pdf.  Thanks for any help.  JLS1946

  Thank you to all who responded.  I have to admit it's a tough trying to decide it's the printer, it's Adobe, is the USB connection / wireless?  Now, that's what I managed to rule out now (thanks for all the help that JLS1946 did) it's not the connection.  I went until take that to someone who is very familiar with the Adobe and they suggested uninstall/re-installing Adobe. He said you should not lose your saved work and which corrected this before.  However, not all of you use the same software or the print version. PDF files, it seems.

  Knowing what I know about the way in which the information is transferred to the printer, it is meaningless for me how only a few .pdfs are slower than others.  Check the contents in the file you are trying to print and compress, when you can.   I know that the web content may take longer to process during a print job and now I have to wonder if that has no place in the commonality among all of those here.

  I think the last document I ran through should have some good suggestions. Let me know if it works. One of the reasons I don't think specifically that it is the Officejet 8600 is especially because it happens to other printers like this.  The only thing you have in common is Adobe. While searching for other PDF readers, I have noticed Adobe had so many stars (3.5 stars) like Foxit Reader (4 stars) did.  I'm not the right person to defend as to who can be a better software to use however.  I know I like CNET for their reviews and videos.

• Computer suddenly starts running slow

  Hi all

  More computer problems - yay.

  I can boot my computer without problem. For about 2 minutes, it works perfectly - things open fast, close quickly, etc.

  Then all of a sudden, the whole system just slows down. All that I'm starting to take forever - the same computer hangs when I click on the start menu. Freezes completely, just for like 5, 10 seconds. But it happens every time, making it incredibly long to open anything (5 minutes for opening google chrome page.)

  I have a MSI motherboard with AMD drivers.

  I noticed that during the freeze, the computer disconnects from the internet (connected with an ethernet cable), raise above the symbol of the internet's yellow warning triangle.

  I start the computer in safe mode, fiddling around with a number of things when I got a warning window stating that I don't have an AMD graphics driver or that its does not work properly. This thread, I think it might be the drivers I installed using an MSI/AMD disc that came with the computer, so I installed them again using the disc, but no difference.

  System Restore does not work, I restored the closest point possible without success.

  Oh, I do not update windows, I had previous problems with windows after updates, so I cut them. This could it be? I'm not sure.

  Any help would be greatly appreciated!

  (1) try a "clean boot".

  How to perform a clean boot in Windows:
  (solve a problem by performing a clean boot in Windows Vista, Windows 7 or 8)
  http://support.Microsoft.com/kb/929135

  Perform a clean boot to determine if background programs are interfering with your game or other programs
  http://support.Microsoft.com/kb/331796

  One by one add back one application at a time in the boot list to check if a particular software application is the cause of the slow down.

  2) update your drivers from MSI web site

  Chances are the drivers to your MSI drive are older versions and have been updated:

  http://www.msi.com/product/MB/

  (3) scan your PC for viruses:

  Details of virus removal
  Download the free version of Malwarebytes, it will detect and remove most of the viruses.
  http://www.Malwarebytes.org/products/malwarebytes_free

  ESET Online Scanner:
  http://www.eset.com/us/online-scanner/
  ESET removal tool (Windows 7 only)
  Burn it to a CD or create a USB bootable thumb with her:
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN3509

  BitDefender Online Scanner:
  http://www.BitDefender.com/scanner/online/free.html

  Kaspersky Rescue Disk:
  https://support.Kaspersky.com/viruses/RescueDisk
  Kaspersky Rescue Disk 10 is designed to scan and disinfect x 86 and computers compatible x 64
  who have been infected. The application should be used when the infection is so severe
  that it is impossible to disinfect the computer using anti-virus applications or malware removal utilities

  Kaspersky free Antivirus Scanning:
  http://www.Kaspersky.com/virus-scanner

  Norton Power Eraser
  http://security.Symantec.com/nbrt/NPE.asp?lcid=1033
  Note: Because the Norton Power Eraser uses aggressive methods to detect these threats,
  There is a risk that it can select some legitimate programs for removal.
  You should use this tool very carefully, and only after you have exhausted other options.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also:
  Take a critical look at your current AV software, it is produced to date or old and obsolete.

  Unexplained computer behavior may be caused by deceptive software
  http://support.Microsoft.com/kb/827315

  J W Stuart: http://www.pagestart.com

  .

• OfficeJet 8720, scan to folder very slow network. any tips?

  I just upgraded to Officejet pro 8600 to 8720.

  The 8720 prints well, but it is incredibly slow for scanning.   Can't believe how slow it is compared to other HP products I've used.

  Is there advice, suggestions on how to speed up scanning?  Or do I need to buy a more expensive model for a faster sweep.

  Please notify.  Thank you.

  Hi @atomarchio,

  I was check in this issue and found a number of things that can help.

  Replace with the IP address of the computer that hosts the folder targets of network for the name of this computer.  For example, if the network path is listed as \\david\8670scans, change it to read \\192.168.1.102\8670scans.

  Turn on the printer and try again.

  Check out this post from @djjaeger82, Officejet Pro 8720 - slow Scan to network folder.

  Let me know how make you out. Thank you!

• Base HP EliteBook 8760w model: computer suddenly starts running slow

  I was playing a game when the FPS started becomes weak, and it is gradually degraded over time. I suddenly realized that my power cord was not connected to the computer, and he was running low on battery so I charged it. After loading, nothing has changed, my browser was slow, staggered games, youtube videos would be in audio delay, then speed up again, just acted really bad. The CPU usage was always about 100% and before all this, my computer has been perfectly fine, extremely fast and usually I would get 144 fps in the game, but now I get 2-12. I tried malwarebytes, safe mode, clean boot, reboot, let it rest overnight, with ca running but no battery, using optimized bios by default, ccleaner clean and ccleaner registry clean.

  I never encountered this problem before, is it a virus or did I burn/break something?

  @Regrettings

  Welcome to the Community Forum of HP.

  A few ideas

  Try a Hard Reset / forced:

  =================================================

  Hard Reset / forced

  • Close running of programs, the browsers and games

  Next

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8

  If you use a laptop

  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the forced reset for your laptop model
  • Start the computer and connect

  OTHERWISE, if you are using a desktop computer

  • Close all your programs and shut down your computer
  • Disconnect devices USB, speakers, other drives useless
  • Unplug the computer thirty seconds
  • Connect the power supply (plug in)
  • Reconnect the devices
  • Start / start the computer and log in

  Reminder: forced reset is a device reset.  The procedure do not destroy your files, or it destroys your Windows installation somehow.  Forced Reset "forces the system to erase and restore the software connections between the BIOS and hardware."

  =================================================

  More...

  • Try to reinstall your game.
  • Take a look at the overall performance from the point of view that the computer is probably not infected - it might be, but maybe it's a coincidence based on timing rather that on a computer running on battery - consider that the system may like to have low maintenance.

  Improving the performance of the system without adding memory (Windows 7)

  • Given the system beating on concern one of the programs that ordinarily would behave himself.  Take a look at the resource monitor - check what is running, how much resources each program uses, and whether these programs that are running are include as expected (not running Amok and steal all the resources).

  How to use Windows 7 resource monitor

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' Kudos on this post.

  Click on accept as Solution when my answer provides a fix or a workaround!

• The magic mouse has suddenly got very slow

  As the title says, my mouse works OK, but the answer is really slow and sometimes the cursor jumps and jerks on.

  I tried to clean it, put new batteries and totally forget and then by reconnecting it to Bluetooth, but it still happens. I even bought another Bluetooth mouse not expensive £10 and it works very well, but obviously this is not as nice as the mouse Magic Mouse from Apple.

  Is - this somethiing to do with El Capitan?

  I am running OSX 10.11.3 on a MacBook Pro (15-inch, mid 2010), 2.4 GHz Intel Core i5.

  Thanks in advance for any help.

  This looks like a problem of interference for me.   You have introduced a new electronic in the vicinity.  Don't forget to turn off your cheap mouse when you do all the tests.   See this document for further assistance.

  http://www.idownloadblog.com/2015/07/25/slow-jumpy-laggy-mouse-cursor-os-x/.

• DeskJet 2544: hp deskjet 2544 suddenly prints very slow but quickly copies

  I have had this printer for about 6 months.  Things were very good.  Recently, it started very slow printing.  I read it could be weak cartridges so even if they had both ink, I replaced the.  I have nothing but HP used since the beginning. I noticed that she copy quickly, but print very, very slowly.  Any suggestions? It has been connected wireless but I stopped that and we hung usb thinking that was the issue.  But no. I should add it is connected to a Dell AIO

  Hello @sues2015!

  Thanks for posting on the HP Forums!

  I should be able to provide suggestions!  I can see that over time your printer running slowly when printing from the computer wireless or USB connected.  If the printer is capable of performing a photo copy at normal speeds and then indicating that the equipment is working correctly and you are probably looking to a software problem in the computer.  Also if the printer is having the same problem USB or wireless connected pointing more fingers to the software.

  The first thing I recommend is to uninstall the HP software. Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.
  
  To uninstall the HP software, click here: uninstall the HP software
  
  To perform a disk cleanup, click here: perform a disk cleanup
  
  To download the HP software, click here: HP Deskjet 2540 all-in-One Printer series full feature software and drivers

  If please, after back and let me know how everything goes.

• HP Officejet 4355 all-in-one: scanning problems

  The Scan option does not appear on my computer despite having installed the all-in-one HP Officejet 4355 printer. I also tried to download the latest drivers for the printer but the Scanner does not work. Yet on other laptops (I have a Gateway laptop), there is no problem, the analysis option is available.

  Is there a compatibility issue when using the printer on Vista?

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools