HP Officejet 4500 cartridge alert

I have a printer HP Officejet 4500 G510n-z, running under Windows 7 64-bit. The printer has been giving me alerts of my being of bundles or tricolor cartridge incorrectly installed (even if it is a cartridge HP Officejet 901 three colors and a new cartridge).  I get the cartridge out, put back in and do an alignment and the alignment is done. When I go to print something, it will always need to print with a color little or not at all, or go back to the same problem alert cartridge. About 3 months ago, I put in an Officejet HP 901XL black ink cartridge and the cartridges worked very well together until I had to change the Tricolor cartridge. That's when my problems started. Must both cartridges be the same?

I read the answer.  Some people use 'print' and 'copy' interchangeably and in the same sentence.  It's ok, but I just wanted to confirm what was going on.  I thought that I understand you, but I wanted to make sure.

I agree with you that we are probably at the end of our troubleshooting options.  You have been through all the troubleshooting steps and reset.  The Print doctor failed.  The only suggestion would be to do a reset full semi if you want to give that a try.

If successful, this reset the default printer and clear the memory.  If the printer was on a wireless network, it should be removed and would need to be reconnected.  If you want to try this, I can send you the steps in a private message to your Forums HP box.  I need you agree to not post the stages.  Let me know what you decide.

Tags: HP Printers

Similar Questions

  • OfficeJet 4500: Frequent tricolor cartridge problem

    I have an Officejet 4500 Wireless bought in autumn 2012.

    I suffer from reports very frequently by the printer there is a problem with the Tricolor cartridge. This almost always happens when the printer is on first, well that occasionally it happens either, or the problem clears quickly without intervention. Even if the problem persists, I can of course make any impression.

    Often, I can solve the problem by opening the door of the printer and, when cartridges have travelled over to the far right, either remove and replacing the Tricolor cartridge, or in case of failure by pushing so hard on the cartridge three colors that I fear the printer.

    I think therefore that the problem is nothing more [sic] as the result of bad contact between the printed circuit board of the cartridge and the cradle of the printer which got him, but I can't be sure. I tried to gently wipe the printed circuit of the cartridge with a damp cloth and isopropyl article in case of dirt or fat are the cause, but nothing helped.

    Has anyone else with an Officejet 4500 experienced this or a similar problem? Is there a known solution for this? Try a new cartridge would be likely to solve the problem?

    When the printer goes it is great, but for now I wonder if I'll have to throw away so much that the problem is so frustrating. I need to be able to print when I want to.

    TIA!

    Hi there @EastAnglianMan Welcome to the forums,

    I read in your post on cartridge errors three colors that you have noticed on your Officejet 4500 Wireless printer. Even if you have noticed that you have tried the majority of troubleshooting, I would say by browsing the troubleshooting guide that is targeted for this specific issue ensure that all steps have been tried. As for trying a new ink cartridge, that would be your personal choice if you want to buy and try to install a new one. A new cartridge may or may not solve the problem completely.

    "Incorrect print cartridge" or "Print cartridge problem" Message appears on the computer

    If troubleshooting doesn't help not solve your problem, then I would say call HP Technical Support to see other possibilities for you, as a business. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

    Have a great day, thanks for posting in the community!

  • Change black cartridge in HP Officejet 4500 now get message "Incompatible cartridge". How can I fix it?

    Change black cartridge in HP Officejet 4500 now get message "Incompatible cartridge".  How can I fix it?

    This type of message may indicate that the printer is waiting for a cartridge with a control chip.  The cause is:

    (1) ink cartridge expired
    Re-filled ink cartridge 2) and the chip was not reset properly.
    (3) a not original HP cartridge.

    The main solution might be to change the cartridge again.

  • OfficeJet 4500 G510-gm: DISTORTED IMPRESSION

    I have an Officejet 4500 G510gm.  After an abortive attempt to printing on glossy photo paper and my pages printed on normal paper now out asymmetrical. I went through the process of "Align cartridge" several times without success.  Is this fixable or fact on average a new printer?

    You mention a failed attempt of photo printing.  Do you have the photo paper jam?  If so, it is likely that the ink was placed on rollers.  This would cause difficulties in feeding paper. In the paper here troubleshooting steps can help solve asymmetric printing.  Clean the rollers as shown in step four.

  • Printing problems HP Officejet 4500 and warranty issues

    Help!

    I have problems with a HP Officejet 4500 that I bought last January.  He stopped working at the end of December, but I had to get out of town for Christmas and have not reported in time.  It is not my main printer, so I didn't start working to try to make it work until today.

    It will start printing, but stops after a few lines, the screen indicates that it is out of ink.  Sometimes he says that the black ink is low, sometimes the tri-color, sometimes both.  After I have the OK button it will print another line or two until it stops and says it's out of ink.  What it prints, it's kind of uneven and blotchy.  Sometimes it falls a letter of a Word.

    When I run a report it wybody help best cut down the lines.  For example, if the line is different sizes of the 'Aa' letter, it will only print the top of the letter.  He will also skip lines.

    I cleaned the cartridges, I aligned the cartridges (that I did when I put these new cartridges), and I'm at the end of my mind!

    Can someone help me or am I just bad luck?

    Thank you!

    I would like to look at this document here. It will give one the troubleshooting steps to try to resolve the problem you are having with a quality of printer output. Among the measures here are ones you mentioned by train, but there are others in the document which are available and which were not included in the above post. If you reach the end of the document, and the question is still involved, would seek the replacement of the product.

    If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

    HP Technical Support call case form:

    https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us & DLC = in & LC = in & Product = 5061082

  • OfficeJet 4500 will not print black ink

    Our small office now has an Officejet 4500 a few months without any problems. Today, it stopped printing any black ink.

    -J' changed the cartridge to be sure, but at no time has it says low ink. This fixed the problem for a few pages but the problem popped up. I align the cartridges after the installation of the new cartridge.

    -J' tried to clean the contacts on the cartridge itself.

    -The functions still scanning and color ink can be printed.

    -Overall impression seems slower, apart from the question of black ink. You know not so bound.

    -The all-in-one has been used more frequently in recent weeks.

    had the same problem, I have the hp printer 4625... I tried the self-cleaning ink printer cartridge under Tools-> cleaning ink cartridge and it worked for me...

    don't know if you tried yet, but if not - it give it a shot

    I hope you will manage to fix it!

  • HP Officejet 4500 All - in - One-hp officejet 4500 G510g P:

    Stampante Ho Una HPofficejet 4500g510g,.

    by the prima volta ho usato stessa cartucce Originali my ricaricate...

    Can Dell... MENTRE lampeggia it pulsating; Sul display e camera Che sta esguendo Dell MA closed... no fa niente!

    Ho tried ha resettarla... iniziando at Una focopia, sul device display "in copia" ma no lo fa...

    riceve i Comandi dal calcolatore, not li can...

    E ' da 4 anni Che C ' e Ho, quindi senza Assistenza...

    No Yes Cosa Posso fare...

    Hi @maryf78

    If you are using HP original cartridges on your Officejet 4500. Have you tried to clean the contacts of the cartridge and the contacts on the printer?

    More details in the link below...

    http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G5/3919445/model/3919447/document/c01953073/

  • OfficeJet 4500: office jet 4500 pages come out blank

    I have a hp Office Jet 4500.  Lately when I print only blank pages come out.  It is still ink in the black cartridge, so I cleaned it according to the instructions from hp (printer only in manual mode). I still get blank pages.  I guess I have to buy a new ink cartridge, because sometimes they dry out before they are empty, but now I'm not sure that's the problem.

    This may seem a stupid question, (I don't know the correct names for parties), but is the bar with light, supposed to go under the glass when she prints?  I lifted the hood to see what was wrong and I noticed it wasn't moving, even if the light was on.  I never paid attention to the printer while it was working properly.  I would like to know whether to fix it before I have to waste money on an ink cartridge.  I know that the digital display informs you if there is a power outage, but it didn't.  Otherwise, the printer goes through its motions normally.

    Hello @epona1 , welcome to the Forums of HP!

    I read your post on how your Officejet 4500 is print is no longer with the ink to print outs. I want to help you!

    The bar with light I think you describe looks like this mechanism to scan, which does not move when you make prints, so I don't see that the question. The question seems sound, as for me, would be the printhead to the printer. I say this because you have tried to change ink already and the pages are always feel empty, when normally change the cartridge would help and fix this type of problem.

    Having said that, I suggest that try you this guide and try the steps it will list. It may possibly fix the problem of blank page for you. If not and the problem does not go away, call us directly to discuss your printing with HP options.

    The problems of print quality for the HP Officejet 4500 all-in-One Printer Series

    Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  • HP OfficeJet 4500 G510g - missing the USB cord

    We had for Christmas the HP OfficeJet 4500 G520g.  He tells me to connect the all-in-one to the computer with the included USB cable.  I looked through everything that came out of the box and there was no USB cord.  I can't use the modem cable to connect.  I need a USB cord.  What can we do about it?  I don't want to have to go buy something separately that was supposed to be included.

    Hello

    Please check a small booklet (or a piece of paper) in the box. This brochure should show what is in the box, and believe it or not, many printers now have no USB cable in their boxes, one of the reasons: reduce costs, a normal USB cable can now cost about $10-$15 which contributes to 10% to 15% of the price.

    Kind regards.

    Update: the Guide:

    What is in the box of

    All-in-One, cartridges (1 black, 1 tricolor), 15 power adapter, two power cords, cable USB (PA only), (PA only) Ethernet cable, phone cord, CD with printer software and user's guide fax guide and poster set-up.

    Where do you live? Only AP (Asia Pacific) region's cables in the box.

  • OfficeJet 4500: Officejet 4500

    I installed a driver for HP Officejet 4500 on my new Mac Pro with OS X 10.10, but I can not configure the printer to print in black & white ONLY, as I did before on my old laptop. Please help me how do.  Thank you.

    Hello
    Follow the steps below to print using black ink only:

    1. from the application used to print, click the file menu and select print. The print window is displayed.
    NOTE: The print window might be minimized: click Show details to display all available parameters.

    2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.

    3. Select Type/quality paper in the menu dropdown.

    4. click the triangle next to color Options of spending parameters.

    5. set the color to grayscale field.

    6. set the Mode to grayscale in black cartridge only.

    You can save the settings for later use by clicking preset > save current settings as preset.

  • OfficeJet 4500 G510g: OfficeJet 4500 G510g will not print full page

    I'm having a problem that gets worse.  My OfficeJet 4500 G510g will not print a full page.  I have installed the latest updates, verified that it's the default printer, aligned the cartridges 2 or 3 times, cleaned the printheads of 2 or 3 times. but no success in getting it to print an entire page

    Hi @thrandall,

    Thanks for getting back to me.

    My suspicion was correct, there is a hardware problem with system of distribution of ink or cartridge.

    Have you tried these steps in my previous post?
  • HP OfficeJet 4500 Wireless: OfficeJet 4500 Wireless does not print

    I just inherited this printer and it's a step above my F380, I installed it.

    It scans very well and sending scans to the computer, but when I try to print or copy, even if it goes through the process (the book covers and print heads move back and forth) nothing appears on paper.

    The cartridges that came with the printer I record as being almost 100% and I ran print and scan doctor nothing is done.  The Test Page 'prints' white also.

    Is there anything else I can try before you buy new cartridges?

    TIA

    Try these videos Youtube here.

    https://www.YouTube.com/results?search_query=OfficeJet+4500+PRINTHEAD

    Find out more if necessary.  If no joy, your printer is toast.

  • HP Officejet 4500 G510n-z: printer will print in black ink only?

    HP Officejet 4500 G510n-z will print with no colour ink installed sorting?

    Jim

    Read the guide to HP here, it does not appear that the Officejet 4500 supports backup mode "ink" that would print with a single cartridge installed.

  • OfficeJet 4500: The Officejet 4500 Toolkit

    I just bought a new pc with Win 10 (64-bit).  When connecting my Officejet 4500, Windows recognizes the printer and scanner.

    The printer works fine and so does the scanner.  My problem is where can I get the software tools for managing ink cartridge levels or calibration of printer line-up?

    Thank you

    Hello

    Thank you for using the forum.

    Can select you the correct printer from the link, download and install the FULL features software. Make sure that you choose to win 10 of the operating system.

    http://support.HP.com/us-en/drivers/selfservice/identify?q=OfficeJet+4500&tool=s-002#Z7_3054ICK0K8UDA0AQC11TA930O2

    Once you have downloaded and installed the full features software, click on the wizard of the printer (on the desktop) and it will bring up interface where you can click the ink levels Estimatred to manage the levels of cartridge of ink or calibration.

    Example is shown below

    Hope that helps!

  • HP Officejet 4500 model G510g stopped black and white copy.

    My HP Officejet 4500 model G510g FPU CB867-64001 stopped black copy.  It print well in black and white and color when it is connected to my G4 Power MAC with OSX 10.4.11.  Also, it copy in color but does not include all black in print.  There is no error message.  There has been no recent system changes.  When you try to copy in black and white, paper feeds ok and looks like it is scanning and printing, but paper comes out of the Virgin.  I don't find any reference to this problem anywhere.

    Hello AHT

    Using the HP cartridges or cartridges refilled/handed to nine? This looks more like a problem with the printer software because you can print Mac black.

    I suggest trying the article below. It allows to solve print quality. I suggest you try it. After printing the report of diagnostic impression if he has problems like the lack of black ink could you please scan it and attach it to your next post.

    Print quality

Maybe you are looking for

  • display iPad problem

    Files for "cutting" in bottom of screen background photo. Now, they are all solid gray.  Is there a display setting that I forgot?

  • 12.5.1 iTunes does not download on Windows

    Hello I opened iTunes, click on 'Help', click on ' Check for Updates ' and a message informs you that iTunes 12.5.1 is available for download. I click Download and nothing happens. iTunes freezes for a second before saying "Access to iTunes Store", t

  • To access the demo of FinalCut project files

    A few weeks back I downloaded Final Cut Pro demo and created an edited video project. It was working fine! The demo has expired and I bought the application. But after downloading the purchased app, I can't access the files of project original demo v

  • How can I change the titles of the playlists

    How can I change the titles of my playlists

  • How to set up independent HDMI/SDI framebuffer options of timing in the sequence?

    HelloI have a tricky this time... One of my monitors to external customer review (large TV) hurt because there is microstutter in the videoplayback if I'm out 25 p signals.50 p signals are working properly.Determination may for example have a 25 p ti