HP OfficeJet 4500 G510-m: set a wireless adapter in the port of my HP OfficeJet 4500 G510-M Ethernet

Similar Questions

• Wireless adapter installs - is msg not found wireless adapter and the adapter never turns on.

  HP desktop system

  Windows Vista

  Router DLink and compatible adapter for Windows 7

  Inserted the disc and MS for installing drivers appears

  Microsoft window pops up saying: these data are incorrect.

  Install the drivers updated the site Internet DLink and still wont

  SE msg not found wireless adapter and the adapter never turns on.

  Hi JRKellison,

  1. What is the model number of the router?
  2. What is the full error message that you receive?
  3. This is the first time you install it on the computer?

  Check and make sure that the adapter is properly connected to the computer.

  I suggest that you try to install the driver using compatibility mode and check if it works.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• No connectivity after installing Dell 1702 Driver for Wireless Adapter - of the suggestions?

  Hello world

  I'm completely confused on this one and at my wit's end.
  I have an Inspiron laptop M5110 and some difficulties to stay connected to my internet so this morning I decided that I would try to update the drivers. I uninstalled the Wireless and Blue Tooth drivers and reinstalled them, but now it will not even TRY to connect at all. In the lower right corner, there is a red x on the wireless bars and says No connections are available. Previously, it would have a circle of rotation while trying to connect, but that is more than all. My Ethernet connection works fine, I even uninstalled and reinstalled this driver (REALTEK) and his work with no problems. So to publish its specific wireless card...

  If I run IPCONFIG, the wireless card isn't even more appear. I tried to reset, deactivation, all I could think about. I tried several versions too many drivers, but nothing works.

  Right now, I removed it, so I have a yellow exclamation next to the network controller in my device settings. My hardware for the adapter ID is PCI\VEN_168C & DEV_002B & SUBSYS_02051028

  I think the info above, I believe that the Atheros wireless card belongs.

  Have any suggestions at all as to how I can get this thing to even try to connect to a network? I'm dead in the water... ANY idea would be so appreciated. I can stick captures screen or something else, if you think it would help.

  Thank you all,

  Tim

  Timmy1028,

  Zone Alarm because of the systems do not connect. Not very good if you want to continue your connection is allowed, or if you have a product key, for your subscription, temporarily uninstall Zone Alarm.

  The Dell Wireless 1702 802.11b/g/n connects to 2'4 GHz ONLY.

  Places to look to see if your connection is activated

  Also try reading, How to repair a connection

  Go to the drivers & downloads , enter your service tag, and then select your operating system. Under network, download and install the latest drivers.

  Try these tweaks...

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Click Advanced. Look and see if this adapter has Antenna Diversity. If the adapter Antenna Diversity, change from automatic to the auxiliary voltage (can you also tell me if there or that it has no Antenna Diversity for my notes.) Thank you)

  Go to the options power and changed the wireless adapter setting, adjustment of maximum power for maximum performance.

  

  Rick

• HP ENVY 15, PRODUCT # G0T55AV: update to wireless adapter on the envy 15

  good windows 7, envy 15

  product #GOT55AV

  don't know if it's a zero or the letter o

  I want to upgrade my wireless adapter.

  my current card is an ATHEROS QCA 9565 802.11/b/g/n QUALCOMM

  is this possible?

  any recommendations?

  If not possible can I use a USB instead?

  @fran4444

  Intel Dual Band Wireless-AC 3160 802.11 ac 1 x 1 WiFi + BT adapter combo (for use 4.0

  only with HP ENVY 17 computer or computer HP ENVY 15 models)

  710662 005

  Your manual here.

  http://support.HP.com/us-en/product/HP-envy-15-notebook-PC-series/6936206/model/7174348/manuals/

  REO

• HP625 - laptop lost wireless adapter after the reconstruction of Windows 7 Home Premium

  My step daughter has asked me to try to fix his laptop HP625 that it had completely stopped working.

  I was able to reinstall Windows 7 Home Edition.

  I was able to start my CD and install Windows 7 but can't connect to the wireless network.

  Router is as well as all other smart devices use. But the key wireless remains resolutely Amber.  I took a look inside the laptop and the wireless adapter is a Broadcom BCM94313HMGB, but I do not see it in the Device Manager.

  Hi, Laurie:

  Here is the link to the wireless card driver you need.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

  If your laptop also comes with bluetooth, you need this driver too.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4173278&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_86863_2%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Best regards

  Paul

• Is the wireless adapter in the Duel for the DV7-7201tx want to strip?

  Hello world

  Quick newby question...

  Is the card the ENVY DV7-7201TX laptop wireless a capable type band duel able to send/receive on the 2.4 GHz and 5 GHz of spectrum?

  I just need to know before getting a new WiFi router. No point to get a bunch of duel if the laptop cannot receive 5 GHz signals.

  See you soon,.

  Wynn

  Hello

  Thanks for the quick response.

  Check the HP website before posting here and nothing...

  Did as you suggested: device controller speaker and found that the adapter is "Intel Centrino Wireless - N 2230' which after a bit of"Googling"indicates that it is a single tape device you thought it might be a lot of sadness... but good... at least I know now."

  Thanks for the help.

  Wynn

• Broadcom 802.11 Wireless Adapter missing the tx1327cl Pavilion with Win 7/64

  I was given a flag of non-working tx1327cl.  Vista 32 factory-installed but I have the recovery disks used by HP to restore to the factory and then update the files, etc..  Now I haved "custom" installed Win 7 64 (since I couldn't switch from Vista 32 to Win 7 64).

  When Win 7 was first, loading wireless drivers and it was fine.  As I downloaded all updates, I continued to make sure after each of them noticing if the wireless was still there.  It was... until the download to Windows Live Essentials has been installed.  He disappeared.  It is not listed in the control panel.  It IS listed in the information system under network adapters.

  When Vista 32 was on, it would be entering and leaving some institutions.  That's why I saw him like a hawk!

  So... question... Is there some 'service' that I need to turn on?  Is there a 'software' that I didn't and I don't have the 'driver' at this stage?  I uninstalled and reinstalled.  I updated with Vista 64 HP drivers and updated with the Microsoft's Windows Update driver.  No help.  Being in the information system means it is there, but something in him running, use it, is not there or not properly defined.

  I looked on this forum and a few others had a similar problem, but their positions do not seem to help.

  I have also some other questions related to "not be able to upgrade from Vista 32 to Win 7 64" and having to do an installation "made-to-measure":

  Things like the fingerprint reader, TV Tuner, etc drivers installed, but I do seem to have software, as for the fingerprint record, etc.  How can I do so that everything works as it should with software & drivers with the hardware in the machine?

  Thank you, Sherry

  Thanks for the link.  I will try.

  Interestingly, between my post and your post, an update for the Chipset offered by Windows Update send me to a driver from HP site link seems to have fixed the Broadcom.  After you install the update of the Chipset and restarting, the Viola, my Broadcom has been "found" and installed and started.

• CanI set programmatically PXI-8431 half duplex ports (two sons)?

  Hello

  I use an NI PXI-8431/8 RS485 card for half duplex comms. I use configuration of the serial port baud rate usual VISA, etc., but I also want to set the port to two sons, no handshake.

  Currently I can do this from Windows, using the Device Manager, but it depends on someone who knows and not to forget to do. I want to automate so that it still occupies my entry into force, without worrying about who used it do.

  Can anyone suggest how I can achieve this?

  Thank you

  Malcolm

  Hi Malcolm,

  You can set the thread mode and the type of control (handshaking) flow in LabVIEW using nodes of property.

  The article in the link below shows how to do this at the end to set the thread mode. If you duplicate the property node, you can choose Flow Control as property instead of the thread Mode.

  Setting the Mode of wireless transceiver on the Ports for the boards of the series NOR:

  http://digital.NI.com/public.nsf/allkb/1D516C10D7EDFAC6862571110073B8F4

  I hope this helps, please let me know if you have any questions.

  Charlotte N

• WIRELESS ADAPTER WILL NOT WORK UNLESS THE WIRED CONNECTION IS PRESENT

  PROBLEM: RECENTLY SPEND YOUR DESKTOP OF WIN - XP TO WIN 7 32 BIT AND MY HP LAP TOP VISTA 32, WINDOWS 7, 64 BIT.

  WIRELESS LAPTOP ADAPTER, NOT REARRANGE ITSELF TO USE A WIRELESS NETWORK

  CONNECTION. THE ROUTER AND WIRELESS ADAPTER HAVE THE CORRECT INFORMATION CONFIGURATION AND WORK WELL USING THE WIRED NETWORK. WHEN I MOVE THE NIC WIRELESS WI - FI FAILS.

  INFO WIRELESS ROUTER:

  LINKSYS BRAND: WRT300N V1.1
  BASIC WIRELESS SETTINGS: NETWORK RADIO BAND = AUTO, CHANNEL = MIXED MODE = AUTO, SSID = ACTIVE.
  WIRELESS SECURITY = WPA PERSONAL WITH TKIP ENCRYPTION

  WIRELESS ADAPTER, INTEL (R) WIRELESS WIFI LINK 4965AGN

  HP Pavilion DV 9700, WIN 7 64 bit update for Win Vista 32, NVidia Ge Force 8600 m GS graphic card, Win 7 64 bit.

  WHEN I CLICK ON THE ICON TO ACCESS INTERNET AND CLICK ON THE NETWORK TO CONNECT, THE WINDOWS NETWORK DIAGNOSTIC DIALOGUE BOX SHOWS CONNECTED, BUT FAILS TO COMPLETELY MAKE THE CONNECTION. WATCH THEN RESOLVE THE PROBLEMS, WHICH FAILS AND FINALLY TO INVESTIGATE THE PROBLEMS OF ROUTER OR ACCESS POINT...

  OTHER PEOPLE HAVE THIS PROBLEM, WHEN THEY SWITCH TO WIN 7. BUT THERE WAS NO MIRACLE DOCUMENTED THAT I CAN FIND ON THE WEB. IN THE OTHER FORUMS DISCUSS ISSUES RELATED TO THIS PROBLEM CONGREGATE, THEY PROVIDE NO BUGS. I NEED HELP TO SET UP MY WIRELESS NETWORK ADAPTER TO THE RECONFIGURATION OF THE WIRELESS NETWORK.

  Thank you all who responded and have tried to help me. Before posting, I tried most of the mentioned patches, including upgrading my firmware of the router. In addition, I went to Device Manager and scanned for changes and checked the properties under the Advanced tab of the Wifi link adapter. I tried the update driver and deactivation and activation of the device. None of this has worked.

  Finally, I uninstalled and then reinstalled the Wifi card. It worked. I guess the driver software became corrupt and data of the register of the device had probably need re - install, this is what worked. This seems to happen when upgrading Windows operating systems prior to WIN 7 and later people lose their wifi connection. Then this problem develops.

  It worked for me. I hope this works for others with the same problem.

  Once again I thank you all.

• Cannot install Wireless Adapter (card NETWORK or USB key) to the Pavilion p6340a Win 7 Home Prem

  I removed a work card TP-Link to a Pavilion a1300a XP Home PC network to put in my Pavilion p6340a Win 7 (64-bit) Home Prem PC.

  Download and install the current drivers of TP-Link.
  Installed everything well and the adapter can be seen in sub "Change adapter settings" in network and sharing Center and shows as working properly in Device Manager, but it is not recognized as a network within the network and sharing Center.

  Under "Manage wireless networks'" nothing appears, if I then click on Add"then manually create network profile" "I then get an informative message '" an unexpected error occurred'. "

  Suspect a problem with the NETWORK card, I uninstalled it and its drivers and tried to install a USB wireless adapter with the same exact result and the error message. It seems that there must be an OS problem or something stopping the wireless to work. USB adapter both NIC work properly when installed on the former Pavilion a1300a XP Home PC. NETWORK card and USB adapter are the current drivers for Win7.

  All the ideas it driving me crazy. A simple 5 minutes on any other PC task turned into many.many hours without solution.

  After many hours of uninstall re install & try everything under the Sun in many forums, I finally found a solution. Despite trying with firewall disabled at different times was the final fix

  1. Uninstall NETWORK card and USB drivers and devices.
  2. Then uninstall the AntiVirus (in this case AVG Internet Security)
  3. Reinstall the NETWORK card and drivers
  4. Reinstall AntiVirus

  Tried the USB adapter as well so that the antivirus has been uninstalled and installed no. with problems.

  Everything works very well.

• Problem with access point or wireless adapter

  Hello world

  tried to connect to my WiFi, but the convenience store detects that the problem with access point or wireless adapter.
  The drivers are up-to-date and functioning normally. There were discussions on BIOS but I don't know if I would be able to complete the task without bricking your laptop.

  Is there any online support?

  Hi smert

  Your message is not really useful.
  Why? Because no one knows all the details of the laptop, wireless network card system...
  So please would you be kind enough to provide more details.

  But despite the missing information, I recommend:
  (1) reset your router WLan
  (2) check the connection to the WiFi unsecured. (of course for testing purposes)
  (3) check the different (WPA/WPA2 AES, TKIP) encryption

• Satellite 5200 903 does not detect the wireless adapter

  Hello everyone,
  I wonder if anyone can switch me to it...
  Since I reinstalled the operating system (my XP pro SP2) PC seems not detecting don't nor the wireless adapter in the device under network adapter Manager.
  Also the light of the flexibility wireless no longer not.
  I also have problems to access the BIOS to check if the card is detected there, have not a Toshiba HW setup in Control Panel as described in the manual.
  Any suggestions?

  Hello Juliana

  The question is how did you install the operating system? If you use the restore CD to install all tools including Toshiba HW setup. If the unit is pre-installed with the Microsoft Windows XP Home edition CD, you must install all the stuff of Toshiba late.

  Just a little explanation about the wireless network card. Basically, if the wireless switch indicator turns not on s clearly indicate on hardware problem. I guess that the wireless card is faulty. Also check if the card is listed in the Device Manager.

  If you want to enter the BIOS settings pres ESC key at the boot routine and keep it down for a few seconds.

  Good bye

• X 41 wireless adapter missing after recovery

  I have a x 41 Tablet

  Model: 1866-6SG

  I just do a cover of product to factory default, now the wireless card does not appear in Device Manager.

  I checked the Bios and it is activated.

  The same thing is happen with that I did a cover on a 61 x a few months back.

  I had to change some settings in the BIOS (IRQ?)

  I don't remember what I did, everyone has had similar experiences, if so how can I get installed wireless adapter and the work.

  Thank you

  Welcome to the forum!

  Good wireless for your Tablet driver:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-70504

  After you download it, you must go to C > drivers > win > Wlanint and run the Setup file from there.

  I hope this helps.

• New 5 Ghz PCI wireless adapter for dv9438ca?

  My new 5 GHz router creates a mismatch... can I buy a new 5 GHz Mini PCI wireless adapter for the following PC...?

  HP Pavilion dv 9000 CTO Entertainment notebook computer PC

  Model # dv9438ca

  Prod. # GL887UA #ABL

  [Personal information]

  It was delivered with... Part # 441090-001... Wireless 802. 11 b / g mini PCI card (Broadcom, Hoya) adapter - data rate of 54 Mbps, 2.4 GHz of bandwidth of operation...

  I want to install any compatible which will allow me to access 802. 11A or 802.11n at 5 GHz

  Please & Thanx

  Beauvaidos

  [Personal information]

  Maintenance and Service of Guide available on this link, I don't see a N Wireless internal that is compatible with the BIOS on this laptop... You will need to get a USB external, if you need to connect to Wireless N

• Windows 7 wireless adapter missing

  Hello

  I have a DELL Inspiron 14R with windows 7 installed top.

  Yesterday, Wifi worked very well, and today, it is not. Wireless adapter is not listed in the change of parameters of the card or even the Device Manager... However, the ethernet connection works fine.

  I tried to reload using the last configuration and nothing has changed.

  Any idea on what the problem might be, and a solution would be more than welcome :)

  Thank you.

  Hello Fredric,

  Welcome to the Microsoft Community Forum.

  1. This is the first time that you connect to a Wi - Fi connection?
  2. You get the error message? If Yes, what is the exact error message/code?
  3. You did it hardware or software change before the specific issue?

  I would suggest trying the following methods and check.

  Method 1: why I can't connect to the Internet? to:

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Method 2: Install the latest drivers for the network card

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-7

  For problems with missing wireless adapter, update the drivers for the wireless adapter and check if you are able to access the Internet

  Method 3: Update a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-isn ' t-work correctly

  Please return with the result and also answers to the above questions, we will be happy to help you further.

  All the best!