HP Officejet 4500 imaging device not found

Similar Questions

• Office jet 4500 G510-g, the imaging device not found

  I have an Officejet 4500 with a wired Ethernet connection. For some reason any, that my computer has ceased to be able to scan from it, I can still print and everything very well. I don't remember to make changes to the system and other computers on the network can always analyze without any problem. I restarted my computer, unplug the printer, uninstalled and reinstalled the software, active windows firewall settings and cannot find any reason why it won't work. I am running Windows 7 64-bit on the computer that does not work, the other computers on my network that still work are running windows 7 64 bit and XP. On the "HP Imaging device not found" error message that opens under more information, I get this: 8 [(1, 0,-2147221496)]

  I've lived the HPSDU and he said: there is a problem with the driver and he cannot communicate with the product. He said also it is impossible to scan with windows WIA, and finally it's the Twain component may be damaged. I have uninstalled, reinstalled, re-downloaded the Installer off the HP site several times, but can not solve this problem. Help, please.

  Hi crakerb,

  When you click on the plus sign on the error message is that all of the information it provides?

  Because you can not install the printer using the USB connection, it seems to have some problems with the operating system on this computer. Did you back up your data and perform a full system recovery?

• The HP imaging device not found... Error 8 [(1, 0,-2147024770)]

  -New installation of Windows 7 64 bit with all the updates of Windows installed.

  -HP OfficeJet Pro L7500 connected via ethernet / DHCP.

  -I get the following error message after you install the full version of the software:

  The HP imaging device not found...  Error 8 [(1, 0,-2147024770)]

  -Two other computers on the network, they get the error and can scan

  Troubleshooting steps already taken:

  1. uninstalled and reinstalled the latest version full

  2 carried out allong uninstall_L3 and uninstall_L4 with a reboot and reinstall about 4 times.

  3 sanning via 'Paint' works very well.

  4. the 'Windows Image Acquisition' service is started.

  5 Windows firewall is turned off.

  6. print jobs.

  7 watch Jet Pro L7500 Office properly in the device under "Imaging devices" Manager

  Nice try, but this isn't an answer very nonsense similar to most of the HP answers I've seen on the forums.

  -J' already have the l3 uninstall and reboot, as already indicated in my original post.

  -L' computer already has the latest version of Flash - over this software has nothing to do with communicating with the scanner.

  -The software is already downloaded from HP.

  However, I have repaired and it is perhaps what made him.  I'm not positive:

  -J' ran 'bpd_scan_Carrier.msi' which is in the folder "setup\bpd_scan" by right-clicking and choosing "update".

  -J' also ran "BPDSoftware.msi" which is in the folder "setup\bpdsoftware" by right-clicking and choosing "update", but I don't think that it did.

  -J' have also installed the Photosmart program but I don't think that that had nothing do with it.  When you run HP diagnostics program, it is said that what needs to be installed for scannig work.

  Thanks HP for all the major recommendations, I read in aid groups...    It is sarcasim in case your wondering you.

• Analysis fails, HP imaging device not found

  Photosmart B209a-m. Windows 7

  I had this all together to the top and a power problem and sort of work broken installation. I have the printer as a wireless network device and it worked fine for months. After the power glitch, I uninstalled the printer and reinstalled and had no chance to get scanning to work. I downloaded the latest HP drivers (full version). I recycled power to the printer and the router and restarted the computer. The HP print and scan doctor said that the scanning driver can not talk to the printer. Printing works fine.

  I originally had the printer hooked as a USB printer and then converted to wireless. So, I repeated the process. I installed as printer USB, everything worked. I then rebooted everything and retested and everything was good. So I ran the conversion from USB in wireless on the Setup option. It worked well, and after unplugging the USB cable, scanning still worked. Be!

  But I then rebooted and now scanning fails again with the same error, cannot find the HP imaging device. Printing works fine. The network of diag test shows no problem. The HP Print and Scan doctor suggests I do the reboot and reinstall I just went through without result. I reinstalled the drivers 4 times without success, except when the first installation in USB and then converting to wireless but that was transient.

  I don't know what I can do? In addition he keeps popping up of the error messages that is REALLY annoying.

  I thought about it. He seems to have been a configuration of printer/router error affecting scanning.

  The first time that I have configured the wireless printer, I have used the Wi - Fi Protected Setup between the printer and my Cisco/Linksys router and everything worked fine.

  For that reconfigure, I let the printer installation software manage the negotiation and Setup. He passed all the tests and print worked fine but scanning does NOT.

  I went in the touch panel printer and Wi - Fi protected setup initiated and supported on the Cisco configuration button. The printer and router negotiated and digitization of works. I shut down my computer and restarted it and scanning always works. I think this is now resolved.

  It seems that drivers scanner use another method wireless printing.

  I'm surprised/disappointed the HP print and scan doctor could not understand this. In addition, NOWHERE there at - it a suggestion to try to renegotiate the Wi - Fi Protected Setup between the printer and the router. Check the cables, recycling power, reinstalling drivers are all suggested, but nowhere is a step obvious allusion. I spent hours doing useless things and the real difficulty was simple and has taken every 1 minute.

• Envy of HP dv7: lack of factory reset. Freeze and crash device not found Boot

  I tried to reset. PC crashes and restarts BOOT DEVICE NOT FOUND, please install an OS on hard drive. Keeps crashing. I am at a total loss. Any help would be greatly appreciated.

  Hello

  In this case, you can try the following method.

  Download the file to Image of Windows 8 on the following link - Note that this Image file is subject to a ceiling of download, you may need to try over a period of a few hours before the download starts correctly.

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

  Use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  If you instead create a flashdrive bootable for this Image, try the free app below.

  http://Rufus.AKEO.IE/

  The product key for Windows 8 is encrypted in your bios chip and read automatically during installation.

  Other software and drivers you need can be found here.

  Kind regards

  DP - K

• Boot Device Not found

  So my problem started when I turned off my laptop, then when I went to turn it on a message pop up saying selected boot image has not authencate I did a hard drive restarted and then when I did it says device not found Boot so I did a hard drive check and he says smart check don't installed and not installed long dst

  You can order the recovery media to install Windows on the new drive. Scroll the list of the software/drivers to see the option:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=5312258

• Scan HP: HP Officejet 6500 E710n-z not found

  My printer and fax works fine, but since the time, I can't scan anymore. By clicking on the icon of the Bureau analyzes the message "scanning HP: HP Officejet 6500 E710n-z not found". "." The Wi - Fi connection is ok because the printer works fine.

  If anyone can help?

  TX bonvreno

  Thank you bonvreno,

  Complete the following steps to solve the problem and get rid of multiple entries in Device Manager.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. The new software - uninstall the printer software Instructions
  4. Once the uninstall is complete, reboot the computer
  5. Follow these steps to reset the registry settings and options for Windows Installer.

• Downloaded image .iso, burned on a CD, try to boot from the CD, but don't get 'ISOLINUX 3.63. "... The kernel image is not found: linux

  Try to boot from the CD

  ISOLINUX 3.63 2008-04-10 Copyright (C) 1994-2008 h. Peter Anvin

  The kernel image is not found: linux

  boot:

  =========================

  ProLiant ML310, dual core processor Intel D series, 3 GB of RAM, 2 x 160 GB hotswap

  So what to do then? Everything boots on this device, Ubuntu, Debian, Windows 2003, etc.

  Any tips?

  Kind regards

  Reg

  Verify the signature of the downloaded ISO file MD5?

• Device not found Airport Extreme

  We have an airport extreme connected generation via Ethernet to a switch that provides network access to our entire House (about 10-15 connections) via wifi access points all Ethernet hard wired (linksys + apple) and a direct wire to a PC. Airport extreme is the dhcp and is connected to a gpon fiber using PPPoE.

  The problem now is that the AirPort Extreme disappears from the airport on iOS Mac utility and Windows, it is found however the network and the Internet continues to operate normally on all connected devices. I can also continue ping on the router.

  I have reset the AirPort Extreme to the default settings, but the problem continued...

  I tried to unplug all devices and have AirPort Extreme only connected to him have the fiber but the problem persists...

  no idea how I can fix this problem?

  You describe a known problem with Back to My Mac which first appeared around July 13. The problem manifests itself in a message "Device not found" meant to be displayed in triangular AirPort your AirPort base station with a yellow icon utility, while the router of the device functions others continue to work normally.

  If you use an airport Time Capsule, backups will not work using that device or USB hard drive units connected to it.

  Apple will only be able to solve this problem, so all you can do is wait for them to do. If you want to contact them to tell them about it, using the contact Support link.

  There is a solution: on a Mac, open AirPort Utility and select file > configure other...

  For each of your routers Apple AirPort Base Stations serving their respective networks: its IP address and password (if you don't know either of them, read the Note that follows the horizontal rule below). Then, on the tab of the Basic Station , delete all the entries in the Back to My Mac using the 'negative' button, then click on Update.

  Which must be re-established appearance of this base station in AirPort Utility, as well as in a side bar of the Finder, if all shared disks are plugged on. It will also restore possibility of Time Machine to save on these discs, if this has also been a problem for you.

  If this seems to imply that you will not be able to use Back to My Mac until Apple fixes it, you are probably right. Well to diagnose problems of the CCMM is tedious work that I have not yet finished.

  Apple does not participate on this site except in a very limited way, so don't expect is not a response from them, here or elsewhere for that matter. We'll just have to wait for them to fix it.

• Airport devices not found

  Hello! I have two devices from the airport: on the one hand at home and a time in my lab Capsule. I was away for 20 days and yesterday, when I came back, there was a problem with the two: my Mac cannot access these devices, they can connect to wifi networks hosted by them. When I try to access these devices via Airport utility, I get the error message "device not found". This message, both at home and in the laboratory, tells me that the device was part of my network before, and that I should check if it is within its range. There is an option to 'forget the device' in the end. It is quite strange, as other Mac networking for my laboratory do their backups normally during my absence. Could you please help me? Thank you.

  This was reported once many here recently.

  A 'solution' refers to those who have set up their base stations for Back to My Mac. If you did, how to follow recommended action is temporarily remove or disable this option, as follows:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
    • Note: You may need to use the option "configure others...". "to access the base station. Enter the IP address of the base station, the default value is: 10.0.1.1 and base station administrator password when you are prompted.
  • On the tab of the Base Station, go back to the section of my Mac at the bottom of the window.
  • If you have entries here, select it and click then the minus sign "-" button to remove it.
  • Click on update and allow the base station restart.

• Why do I see "device not found" airport Admin?

  I have an AirPort extreme and my parents have a TimeCapsule. They are both showing the message "device not found" in the administration of the airport. We tried cycling power etc. Our networks still work, however we can not connect to manage and backups of my parents stopped. Is anyone else seeing this?

  

  You have Back to My Mac configured on your AirPort Extreme? If so, disable it.

  This issue was widespread in the last days. We are all waiting for an answer / difficulty of Apple.

• Device not found, but internet work

  I have an Airport extreme with a capsule 2 TB that I use as a backup file.

  All of a sudden I can't connect to the airport time capsule. When I launch the airport utility, there is an orange triangle/exclamation point that fits the description "device not found". The router works well, since I am connected to internet (at this time).

  I tried to unplug the unit and time capsule comes back for about 2-3 minutes until the same problem occurs again. Factory of Soft and hard resets produce the same results. I know this isn't my macbook pro because it does the same thing on my phone as well.

  You have Back to My Mac configured on the TC with your AppleID?

  This has happened to me and when I removed my AppleID and disabled Back to My Mac it ceased to occur and the TC became visible again.

  I hope that Apple will fix this soon but it would pay record a call of support with Apple on this topic as well.

• Airport Time Capsule device not found

  I have the time Capsule on the airport of the TB 3 802.11ac (bought 9/2014).  It integrates the latest version of the 7.7.7.  Just last week, I received the error device not found (.. .has been previously a part of your network... etc.).  The internet connection is always good and the component of the time capsule router still works.  When I unplug the device, it can find him but eventually will go down in a few minutes.  I also did a warm reboot, but some results.  Printer connected to the time capsule does not, nor does Time Machine back ups.

  Would be grateful of any advice on why the drive not found error continues to occur.  Thank you!

  You have Back to My Mac enabled on the Time Capsule?

  If so, turn it off for the moment in the AirPort Utility and restart the time Capsule.

• Device not found in airport 6.3.6 utility

  Running a 5th generation I'm stuck. I checked a bunch of other posts and restarted all devices, as well as reset the base station. I also adjusted IPv6 at the local level.

  When I pull up the Airport utility, I get "device not found" and cannot connect to the base station to adjust settings. What is weird is I can get temporarily in Airport utility if restart my MacBook and the base station at the same time. However, it does not last long. I also see the drive mounted in the Finder all the time. A Wi - fi connection works without interruption.

  I tried this on 2 Macbooks, an ipad and an iphone. El Capitan running. I am at a loss.

  Someone at - he was able to solve this problem.

  You are one of the many ad today with this problem.

  for example. There is only one thread.

  Time capsule not recognized in the utility of the AP

  I suggest that you can still access the AE or TC using configure others and type the IP address.

  A 5th generation is the flat and quite old but more reliable than Gen6. But beyond 5 years they get flakey.

  If you mean a 5th Gen TC then this is the newest one.

  I am surprised, he's also missing on the iOS but who was more reliable version of airport utility.

• Performance of Time Capsule and "device not found".

  I am now on my 2nd TC average weeks because I thought the first was broken-, but I get the same questions on the second >

  1. A Wi - fi connection is very intermittent.  Seat 3 feet of the TC, I can get 450Mbps on my iPhone 6 and 5 minutes later her stockings to 2Mbps or less (measured on the Wi - Fi Sweetspot app).  Similarly, the speed of connection internet test ranging from 20-30Mbps until 0.3Mbps not it depending on the strength of the wifi.
  2. Air utility sometimes connection works and see the TC.  But often it is not.  First he asks the password, maybe 2 or 3 times.  Can I get a yellow triangle showing on utility AP with "Device not found" and the only option is to Forget.  The TC IS still there, but since I use it for ethernet and wifi internet access still works because I am always online.

  So, what speeds SHOULD I get the Wi - Fi, 3 feet of the TC - I would have thought higher?

  Why WiFi speed decreases considerably, sometimes in the same place?

  Why the Airport utility is not the device, when it is still there?

  Is this a general problem with TCs?  Is this another duff, one back?

  Thank you

  Update you the firmware to 7.7.7 in the TC?

  If all tests performed 7.7.7 then downgrade the firmware to 7.7.3 as he could work much better.

  If it still fails I just return it.

  They seem to vary a lot in quality of construction. Some work OK but many have problems... and when you Exchange to the same store you get another from the same lot.

  There are a lot of articles on wireless diagnosis.

  for example, from your Mac.

  Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac - Apple Support

  Follow the wireless in a few days... and use ethernet if possible... Wireless is never a reliable substitute for ethernet.

  iOS

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

  A lot of wireless issues with each new version of iOS... he could so your phone that is the problem, not only the TC.

  https://www.YouTube.com/watch?v=j4qgH8uyOk0

  You should check how wireless is around you and the intensity of the signal of all devices.

  I also need to know the exact of the TC configuration and your network if you want to find the problem. Although problems with the Wi - Fi in the TC would be not at all unusual.