HP Officejet 4620: Installation HP 4620 printer on Mac OS 10.10

Hello!   I have a HP Officejet 4620.  My printer is fine, but my computer has stopped recognizing my printer suddenly about 6 months ago.  I thought it was the USB connection, so I bought a new power cord USB printer-computer, but it does not solve the problem.  I tried to install the software on my computer to see if I could get a recognition without wire between my printer and the computer.  When I installed it, I got a warning window saying that the officejet does that by 'Mac OS 10.5 - 10, 7'.  I noticed that my computer is Mac OS 10.10 Yosemite.  Is this the reason that my computer is not recognizing my printer?

Thank you for helping me to recover my printer!

@charisbrooke

It's the driver for OS X 10.9 and 10.10

http://FTP.HP.com/pub/softlib/software12/COL52003/MP-125737-3/HP-inkjet-SW-OSX-Mavericks_v12.34.40.dmg

REO

Tags: HP Printers

Similar Questions

  • OfficeJet 4620: printer keeps going offline

    OfficeJet 4620 - printer keeps going offline.  If I turn it on and turn it on, it's online for a while, but it disconnects again.  My IPad can't print on it. My Windows laptop, 10 shows as offline.  I can open his web page by entering the IP address in a browser and can ping it, but it also shows offline.  It is very annoying to have to reset the printer whenever I want to print to it wireless.  Is this to say that the wireless antenna is going wrong?  Should I buy a new printer?

    I found what caused my problem when troubleshooting the installation of a new printer. I have 2 range Extenders. They had the same ssid as my router. One of the reports of tests of the new printer had a warning about it. I changed the range extenders in order to have all 3 different SSID. Now when the ipad & printer are that both connected using the ssid for the range extender in the room with the printer, there is no problem of ipad impression. My old printer is fine.

  • HP Officejet 4620: Printer is in"error" and will not print, even though the computer says that it is "connected".

    My printer recently started telling me it was in a State of 'error' and could not print my documents.  Sometimes I could turn off the printer market and all that was trying to print would then print, if documents or Quicken checks.  Now I can't print from the computer at all, or it will print checks from Quicken even if I turn the printer power off and power on.  The HP Web site indicates that it is connected.  It is the second computer from HP Officejet 4620 of the original that I bought.  The first has a problem that has been covered by the warranty, and this one doesn't seem to be much better.

    Hi @Janilynn,

    Welcome to the HP Forums!

    I read your post and wanted to help.

    I understand that the printer does not print when the computer shows that it is connected.  Please run the print and scan the doctor.

    I would like to know if it solved the problem or gives you an error message.

    If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

    Kind regards

  • HP officejet 4620 printing problem

    I use a HP Officejet 4620. The software is installed on a PC using Vista. I can print to it from my Ipad, but not one of my desktops. Help, please!

    Hey accents.

    I see that you have an impression of question from your Vista PC for your Officejet 4620.  How the printer is connected to the PC?  If network, then what was the last time your electric network configuration has been cycled?

    Follow these steps to reset your printer HP, your router and your computer.
  • Hp officejet 4620 printer that I need to know where is the guide to the user and how to clean ADF

    Device's printer Hp Officejet 4620, I need to know where the user guide is? How to clean the ADF?

    Hello

    As OEM HP is responsible for the good operation of the printer and their
    drivers provided. Check with HP support, their documentation online and
    drivers and ask in their forums.

    HP Officejet 4620 e-All-in-One Printer - drivers and software
    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5191646&LC=en&cc=us&DLC=en&lang=en&cc=us

    E-all-in-one printer HP Officejet 4620 - support and troubleshooting
    http://h10025.www1.HP.com/ewfrf/wc/product?product=5191646&LC=en&cc=us&DLC=en&lang=en&cc=us

    HP support/troubleshooting & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Set Up for HP OfficeJet 4620 prints to fax only

    Try to implement OfficeJet 4620 wireless laptop running Windows 7.  Wireless set in place works.  When a document is printed, a fax page.  Document never print to the printer.  After you set up the printer name is preceded by FAX.  Have deleted the printer and re-installed several times.  Do not see possibility to do something different.  Any help appreciated.

    @GuyNameDavid, sorry that you experience this problem with setting up a default printer.

    Try uninstalling and reinstalling the software and drivers. Do you still have the CD?

  • All-in-one HP Officejet 4620: printer problem

    Printer works fine with the office. When you try to print from laptop, black is faded or nonexistent. The colors are sometimes normal and sometimes faded. Are passed through the HP print and scan doctor including updated drivers and the problem still exists. It started when I replaced the black ink cartridge. HP used cartridge, not off the mark. Printer is set up with WiFi connection with a Belkin N600 router. Both computers are HP. Last screen with print and scan doctor says printer has some serious problems.

    Hi @freddie3,

    You know, even if the printer prints fine on a computer, I can't help but feel that the question has something to do with the printer itself. Let me explain; I wonder if when you print from a computer so the settings are grayscale, so 3 colors would be coming together to create a composite black.

    We will complete the recommended steps provided in the following document, this will help determine the root cause and can help to solve the printer prints a blank Page not printing black or color ink for HP Officejet 4610, 4620, Deskjet Ink Advantage 4610 and 4620 e - all-in - One Printer Series.

    If the problem persists, please let me know if the test pages have black ink on them or not. This will help me determine whether or not the problem is, in fact, the printer.

    Thanks, I look forward to hearing back on your part.

  • Do my HP OfficeJet 4620 print in black ink only, permanently.

    I want my printer to always print in black only, on the quality of the project. I went to devices and printers > Printing Options > advanced and changed printing in grayscale only for "black ink". I also made the same change on the page I want to print and go CTRL + P > properties > advanced and making the same changes.

    However, my printer automatically returns to print in color after only a single document i.e. whenever I print a new document, the changes are cancelled and it is up to the color.

    It's much too much time to repeatedly change the settings everytime I have print something, I need to print about 70 separate documents every morning! How to make this change permanent?

    I use Windows 8 if that helps.

    Thank you!

    Hello MarkC-S,

    Welcome to the HP forums!

    I understand that you tried to change the printing parameters for "Black ink" only, but it is up to color ink. As you said, the print settings seem correct and it should stick permanently. How is the printer connected? USB or wireless? I recommend you to uninstall the software.

    Please follow this HP document uninstall programs and features.

    Then clean your Temp folder on your computer:

    1. On the keyboard, press the Windows key and the 'R' key, and then type %temp%. Press ENTER.
    2. Press 'Ctrl' and 'A '. This will highlight all. Right click on your mouse and select delete

    Now, install the full features on the site of HP software here. Choose your operating system that is appropriate; 32-bit or 64-bit. If you need help to install the software, please follow this HP document here. Choose your correct connection type.

    Once the installation is complete, please let me know if the 'black ink printing"stick this time!

  • HP officejet 4620: hp officejet 4620 printer all in one

    series #CN33S210C8

    After 2 pages print, my printer stopped printing.  Then I changed my cartridge, when I tried to print again, I got blank pages.  Just installed a black cartridge genuine HP.  I cleaned the print head 2 x and still get blank pages.  Can someone help me with this problem.  Printer was purchased 7/2013 and I think I'm out of warranty.

    My printer has stopped printing - I don't get white pages.  I cleaned printer heads 3 x and aligned, but nothing works.  What do you think that the problem can be.  The printer goes through all the motions, but does not print.

  • HP Officejet 4620 prints black only moroccoin pink

    I have used the printer maybe twice and now it will only print my BLACK images in pink. I tried to go to "Préférences" and change to "black ink only" but has nothing. All cartridges are installed properly, the ink levels are good, I printed a status report and the text came out in black. Just my images will not.

    You will need to do both: select plain paper (or whatever the document type you use) AND select levels of gray and black ink only printing.

    The black ink print head is designed for printing text and the droplets are much larger than those of the color print head.  To make the best quality print light areas are printed with colors unless you specify black ink only.

  • Officejet 4620 print double-sided

    I am disappointed that this printer will not print both sides of the page. Assume that any modern printer would do that. Should which model I exchange for...? ...

    Double-sided printing is listed as "Duplex printing".  It is available as a selection in the menu "special functions".

  • X 2 Pro 512 G1/Officejet 6310: Installation of HP printer on Windows 10

    I can't get my printer to install Bluetooth on windows 10. With Bluetooth kit on windows settings, I've added, and all seems OK in Device Manager.

    The printer is correctly installed to work and connect usb cable. It's just the bluetooth option does not work.

    By bluetooth, it is paired and connected ok, and the name of the printer appears fine under bluetooth devices in device (which are all installed correctly) Manager. Curiously, it is called "printer, scanner, copier" in the printer folder devices nd, rather than by his real name, or name of the product.

    In the wondows 10 settings bluetooth settings it says driver is uavailable, and the printer is missing from the list of printers when you print from applications.

    I tried update the driver of the printer (the device, other devices Manager) but says windows can not find the drivers. (in the Device Manager it shows drivers installed and does not any errors).

    I removed and added the printer, but this has not solved the problem. I don't know what to try next.

    I have now solved this.

    I removed the printer in the printer list. I then used "add a printer" settings / bluetooth/printers add it to begin process again. When he could not find my printer, I clicked on "not in list" which meant that I could choose how I could set up the printer 'manually' - the last option on the screen. It asked what port I wanted to use. I chose the bluetooth/virtual port. It was the whole secret on how to install. Then, everything went well and the printer now works over bluetooth.

    I hope this can help others with the same question because it took a lot of time try all other options before discovering this necessary port first setting - IE. the road to the manual installation.

  • OfficeJet 6000 E609a will not print from Mac applications.

    I can print the HP utility diagnostics, but I can't seem to get any Mac application to print anything. The pages are always hang in the queue with an unspecified error. I tried ALL the recommended procedures for the diagnosis of this problem, but nothing has worked.

    I have proposed several times, and it often works.  Make sure that your OS X is healthy:

    1. download and install Mac OS X 10.6.8 updated Combo.
    2 download and install the Apple for Mac OS X v10.6 HP printer drivers.

  • HP Officejet 4620: HP Officejet 4620 only ink red print documents computer

    Hello

    I'm connected wireless to my printer HP Officejet 4620. I use the XP operating system (I know very dated) I am trying to print Word documents and they are just an impression in red ink. When I try to run "Clean printhead" function black ink prints fine through the printer. Can someone help me or explain the reasons for which the documents are only printing red ink through my computer?

    Thank you for your time,

    Steph

    Hey @StephyB,

    Welcome to the Forums of HP Support!

    I understand that e-all-in-one Officejet 4620 prints in red when you print from Word on your Windows XP computer. I can help you with that.

    Probably what is happening is there is a font setting that has been changed in Word. If you are unable to find such a context, then the following can be done:

    1. Close any programs you have open.
    2. If the printer is connected via a USB cable, remove it.
    3. Click on start, control panel and printers.
    4. Right-click on any icon of your printer listed.
    5. Click on remove the instrument.
    6. Repeat for all other icons of your printer listed.
    7. Uninstall the drivers and the software associated with the printer.
    8. Download the latest drivers by clicking on this link.

    Please let me know if this allows you to print in black. If so, please click on accept solution. If you appreciate my help, please post it by clicking the thumbs up icon. The two icons are below this post.

  • HP OFFICEJET 4620: scanning

    Hello

    I installed the software and the drive to my HP Officejet 4620 printer, fax, scan, copy. Everything works except the scanner, why the scan in particular does not work?

    Please can you give advice on the procedure as to what and how I have the scanner functional installation?

    Thank you

    Fay22

    Hello

    Thank you for using the forum.

    You need to install the complete HP scan software features.

    Here is the link for convenience, select the appropriate operating system you use and FULL of features for downloading software:

    http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-4620-e-all-in-one-printer-series/5101229/model/5101234#Z7_3054ICK0K8UDA0AQC11TA930C7

    What operating system do you use?

    Hope that helps.

    Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

Maybe you are looking for

  • Support of speed internet 1 GB

    Hello I have both time capsule and air as an Extender, the last two models verti, connection I use time capsule as Internet router, now I want to increase my internet speed 1 GB so I was wondering time casuple support This routing speed? And the exte

  • iPad won't matter SD card jpegfiles

    iPad will not import jpeg on SD card files. The files were exported from Mac Pro

  • I got a notice that I had a virus and MacKeeper could protect my computer. Is MacKeeper a valid Apple product

    I got a notice that I had a virus and MacKeeper could protect my computer. MacKeeper is a valid Apple should I install and have my computer scanned?

  • HP hard drive problem

    I had a problem with the disc of ch, "cannot open access." MS solution was to go to sevices.msc and select a respective service as "auditor of virus or disk monitoring tool", but there is nothing like this in the list of programs.

  • reporting for trend PLE using Foglight

    Hello I use foglight for SQL Server 5.7. I want to create a report that shows the trend for the life expectancy of Page for a SQL server server. How can I do? I'm not sure I'm in the forum of Community law, but I couldn't find community for "foglight