HP Officejet 4622 light flashing

Similar Questions

• I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

  I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

  Well, if you haven't tried this and then create a coercive power reset:

  Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

  If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

• Lights flash constantly on Officejet 6500 E709n

  I have a 709n 6500 that when turned on all the lights flash continuously and won't off as suggested to be restarted.  Have to unplug to stop flashing.  He continues to do the same thing after plugging it in

  Hi puckmgr,

  The printer display an error?

  Try to remove the cartridges and print heads, and then the printer without their feeding cycle being. Make sure that there is no paper stuck inside the printer or in the unit of the duplex unit.

• OfficeJet 7000 magenta light flashing

  Hello

  I use inks compatible with my HP 7000 for awhile. I recently installed a new set of cartridges and ended up with a magenta flashing light on the printer. However, the printer still works fine.

  According to the HP 7000 user's Guide, the flashing light of color means that the ink cartridge is missing or duplicate. This is not the case! By using the web server printer estimated ink levels indicate X,?,?,? for Magenta, Cyan, yellow, black. The question marks are to be expected because the ink cartridges have been recycled and so the printer is unable to estimate the ink levels. But why the level of Magenta have an X? This is probably why the Magenta light flashing. The Magenta cartridge is not empty. Replacement of the cartridge with an another Magenta does not change the X to one? The Magenta Cartridges come from the same manufacturer as the Cyan, yellow and black cartridges. Why Magenta appear different? Performing a reset, stop the printer then remove power, makes no difference.

  I can live with the flashing light magenta, as long as the printer prints OK, but it would be nice to understand the question. Someone at - it ideas?

  Hi Shirlzz1,

  Thanks for your answer to my question. Your link has been very good. I had never heard of 'windows of ink' front! Then I checked the ink window and found that I had to run out of ink! Oops! I have some egg on my face! Yes! But, why the webserver printer displays an 'X' against the magenta ink level? If I use (not HP) compatible ink, the printer is unable to view ink levels. Therefore, in the same way, let's assume that the printer cannot know when a cartridge is empty. It is not only a question of windows of the ink. One of my old magenta cartridges had a window of the ink and the other does not. Both displayed indicators of ink. In any case, let me not to lose more time. I adapted a new compatible (not HP) cartridge magenta and magenta light flashing stopped! Now, everything's fine.

  Thanks again for your help.

• HP Officejet Pro K8600: Power light + resume light flashing after printing only one Page

  After trying to print a document of several page, the printer produced a page and then the power light and the resume light (page feed) Flash. I also tried to print multiple copies of a page, but that leads to the same result.

  I can get the lights extinguish by turning printer off then turn it back on. But it will always print that one front page the same lights begin to Flash. I did six times in a row just to print a six page document.

  I went through all the steps in troubleshooting HP software. Not like searching for cleaning print heads, re-seats cartridges, etc., fragments of paper. Nothing seems to work.

  @Bob_Headrick

  Thank you for your response. However, none of the suggestions could solve the problem. ALTHOUGH the light guide troubleshooting that you provided was close to the solution.

  I came across the solution by reading the PDF manual for the printer. On page 77, it describes the power led + resume light flashing. One of the causes for this using EXPIRES of CARTRIDGES of INK, CARTRIDGES RECHARGEES or NON HP CARTRIDGES.

  WARNING: It is important to note that if your printer is still under warranty, DO NOT DO THIS. HP notes in the manual using this substitution can void the warranty against damage caused by the use of faulty ink cartridges, obsolete or not allowed.

  SOLUTION:

  While the power light and button resume flashing, press and hold the power button and press the button repeat 3 times. This replaces the "apparent" internal error message to use the cartridges you have installed. It may also cause a print cartridge alignment page.

  MY OPINION:

  It is important to note the HP cautioned against it, it FIXED MY PROBLEM IMMEDIATELY! I know that the cartridges that I have installed are in agreement. Like many HP owners out there, I take advantage of sales and have stored on cartridges. I guess some may "expires" before you install it. In my view, the idea of "expiring" cartridges also somewhat falls into this column to "How can do us buy more ink?" What kind of market we create where it's cheaper to buy a new printer than to buy a new set of cartridges/toners? BUT it's a slippery slope... let's not go there.

• Cartridges lights flash on full cartridges

  My officejet pro K8600dn shows lights flashing on the printer cartridges, while the cartridges are full. Putting the printer turned off and didn't help. When I do a very strong push on the cartridges, that the lamps are going out and I can print. Then the lights flashing again. By the way: I only use original HP cartridges.  My desktop computer HP Pavilion and OS Windows 7 pro 64 x, has already the latest version of the software and the driver, but it does not solve the problem.

  Using authentic HP inks? I would clean the contacts on the cartridges to make sure the accumulation of ink was not causing and delivered with the printer being able to read that the cartridges are inserted correctly. If after manual cleaning, you still have a problem, I would like to do a hard reset of the printer. A hard reset will attempt to restore the printer to a known working condition and no user parameters are lost with a hard reset. First of all, start by cleaning, I know the model presented is not the same, but the cleaning cartridge is what one wants to follow.  To do this:

  1. Open the cartridge door.

• DeskJet 940c: 940c cartridge light flashing

  I just print something yesterday and nothing happens (having previously printed a page). Looked at printer - cartridge light flashing. Used HP printer doctor, open lid and transport moved to tricolor cartridge so resumed there and in. No difference. Then taken and in the black print cartridge and carraiage moved to here! Repeated several times to no effect. Never had this problem before and I have no cartridge spare at the moment. I'm stuck for a solution!

  Thank you

  Hello

  For some unknown reason, it started working again after just checked to make sure that the USB cable is firmly connected the printer (it is).

  On the surge protector, I have always used an and reven didn't think that (not that I have now but I'll keep in mind of course). I used the guide you mentioned to troubleshoot not that it helped when I used the guide before it started working again after checking the USB connection. I intend to buy a new printer I've had this one since 2002 about, so I was not eager to buy new cartridges that might not even work. I have two in one I have a flat bed scanner and I like the look of the printer HP OfficeJet 8100.

  Thank you for your reply, I appreciate it.

• Indicator light flashes yellow.

  The light - usually green and steady - hand flashes yellow. A Wi - fi connection is always connected.

  The yellow light flashes when the airport router has a message for you.

  Find out why the yellow light flashes when opening the AirPort on your Mac utility (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the AirPort Extreme

  You see a button update?  If so, click on it

  

  Otherwise, find the status setting and click on the little orange dot it for more information

• Is fallen from MacBook Pro, light flashes three times, won't start

  HHello, fell of my MacBook Pro 2011, about two feet on the ground, there is no external damage.  Front light flashes three times and will not start.  Tried holding button, smc, pram.   Have been reading about the RAM.  Maybe it's in bulk, hope that's it, that is.  Don't have the tools (unibody).  Any ideas, help?  Thank you

  CCan really turn on and off with power button flashing light / stop.  And can hear the click (assuming it's the disc) turn off.

• 32D1334B LCD TV - not light power light flashes red & Green

  I have a Toshiba 32D1334B LCD TV, it used to work perfectly well and then all of a sudden, it will not activate.
  When I plug in the TV, the power automatically light flashes red and green permanently. There is no way to turn on the TV; the screen remains black.

  I had to take off the back, watched and deleted all the parts, but can not see the obvious problems. I also a multimeter and power to the various sections of the TV is, but that's as far as my electrical knowledge goes!

  I don't really know what else to try, but I am very reluctant to throw away the TV that I know it's probably a unique piece that needs to be replaced to fix it. I searched online and others have reported the same problem exactly, but it had not resolved there always. Unfortunately, TV is more under warranty... If anyone has any suggestions or can provide any help, then it would be greatly appreciated!

  Thanks in advance.

  If you find out how to fix it please let me know because my tv is the same.chris

• charge light flashing problem with hp probook 4530 s [redacted]

  I have a problem with my hp probook 4530 s serial number: [edited by Moderator]. A few times while I use the continuous orange light flashing load on the battery and if I stop the laptop and try turning on the laptop, the orange charge light blinks 8 times and it is not running until I remove and insert using battery me back.kindly I'm so nervous.

  more information:

  Windows 7 ultimate 64-bit

  BIOS version: F.25

  [number removed for privacy]

  Finally, I think it worked.

  bios for update

  Version: F.40 (March 12, 2013)

  its almost 10 hours and I load/unloaded my laptop 2 times and his works fine. mashAllah.

  No problem flashing light up now.

  hope I never face again the blinking light problem. God willing.

  Here is the download link for the latest version of the bios:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5060880 & prodNameId = 5060882 & swEnvOID = 4053 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-116443-1

  Note: the BIOS update is sometimes risky, so be careful and follow each instruction.

• HP Envy 5540: blue light flashing

  the printer that is connected directly to the laptop. Works very well. Now, all of a sudden, blue light flashing and will print still but at a snail's pace. What's wrong? Nothing has changed. Paper in the tray.

  Hello @sleuther,

  Thank you for your response.

  I understand that the laptop is connected to the wireless network. It is quite well turn off the wireless feature. Follow the steps and check them out below:

  • In the printer control panel, press on icon (Wireless). Wireless summary appears.
  • Touch icon (settings) and then touch wireless settings.
  • In the wireless settings screen, select "Disabled" for the wireless option.

  Let me know if it helps.

• My airport express base station works but the yellow light flashes constantly how can I get the green light?

  Yellow light blinking on my airport express and I can not get the green light flashes. Internet still works well.

  When the amber light is flashing, open AirPort Utility

  • Click on the AirPort router
  • Look for the Status parameter in the small window that appears
  • Click on the little orange dot here and another window will open to explain what might be the 'question '.

• zt1195 lights flashing No. start?

  I just got a laptop zt1195 . The problem is when I plug all lights flash on and outside and continue to do so. I can't turn it on, it just flashes.
  
  If anyone can help me with this it would be much appreciated. If I don't work, it will make a nice work for my wife computer. Thank you

  here some photos of reference;
  http://www.Flickr.com/photos/26078767@N05/

  OK for anyone interested, I bought a Targus adapter for a bridge I'm working and decoded to try it on the HP and it worked like a champ! She does very well and this has happened after the (empty) Squad to buy (empty), (last resort) told me that maybe it's a bad DC Jack or a bad mother. Well
  
  Thanks for all your suggestions.

• Satellite 2805-S201: AC power light flashes orange 8 times

  Hello

  I worked on a Satellite 2805-S201 and everything was fine until I put a PCMCIA wireless with 3, 3V power.
  After that, the AC power light flashes orange 8 times and recycle.

  It comes with power supply, battery, AC and no battery installed, etc. If I pull out the power plug and the battery and then put both when AC is green and the battery may charge. As soon as I push the power button, I hear a light click on the right side of the device and then it goes into the amber cycling power.

  Bulletins of support mentioned that the card could get damaged, but did not mention the unit itself.
  No, the PCMCIA card is not always connected

  Any thoughts?

  CA

  Hello

  The flashing provides a micro code which refers to the hardware failure.
  But please don't ask me what might mean this code because in my opinion, only an authorized service provider can be read and can check in his manuals and documentations.
  But it is of course, in most cases, it s a hardware problem of motherboard! ;(

  Perhaps the external PCMCIA card was not totally compatible and damages of something on the map but it's only my personal suggestion to ensure what s bad hardware fault diagnosis would be necessary.