HP Officejet 4630: cancellation of an impression

Similar Questions

• HP Officejet 4630 all-in-one printer print cancels in the workplace

  Hello
  
  I recently bought a HP Officejet 4630 all-in-one printer, and it automatically cancels the work in the middle of printing. The computer I use is a dv7 HP Envy with 64-bit Windows 8, and I print on a wireless network connection. My computer receives an error that HP Officejet 4630 series could not perform printing and the printer just says Cancel. I tried all the steps in the sections troubleshooting, both printing and network connections problems. I've uninstalled and reinstalled the software several times, I created a manual IP address and everything, but nothing seems to work. It seems also that the issue when using HP ePrint. It occurs in all sorts of programs and formats such as word, pdf and html. Unfortunately, I did not receive a USB cord, I can't see if that will fix the problem at all. I hope someone can help me with this, otherwise, it is obvious that there is a problem with the actual printer, I have had and I have to return something else.
  
  Thank you

   

   

  This is how I fixed it:

  1. Find out what IP address, is that your printer uses.
  2. Go to control panel, then click "View devices and printers."
  3. Look for your printer right click.
  4. Click on "Printer properties" and a new screen opens.
  5. Along the top, you will see some tabs. Click on the one that says "Ports".
  6. Click on 'Add Port '.
  7. Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port".  A new screen opens.
  8. Click "next".
  9. Type the IP address of your printer, and then click "next".

  Your computer should find your printer.

  Click 'Apply' and your printer should work fine.

• HP officejet: Hp officejet 4630 does not print

  I try to print a document from my computer and all I'm getting are dashes or white sheets. I've only used the pronter 4 times because I got it and 2 out of 4 times are to print or copy. There is ink in both cartridges so I don't know why, it's just Govind me white pages. I tried to clean the cartridges and to align it to see if it works, but the alignment page was not printed correctly. His lack of the printer image and most of the lines on who should be present. I know because I still had the first copy, when I did the alignment. I had this for less than a year and hardly used lrinter so I don't know why this isn't the impression that it should.

  Hello!
  Welcome to the HP community @Alewis324,

  I read your post on print quality issues you are facing with your Officejet 4630 and I wanted to answer with my suggestions for troubleshooting.

  Check out the links below and try the troubleshooting steps. If the quality does not improve, contact HP to discuss alternatives to the printer.

  1. Fixing poor print quality
  2. Printer prints a blank Page or doesn't print black or color ink

  If you have trouble, let me know and I'll do my best to help.

  Click on the thumb to below testify my help!
  Click on the 'accept as Solution' if I'm you guide to a solution!

  Best wishes

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• HP Officejet 4630: Enter search term the PROBLEMS of PRINTER

  I'm trying to print a document on my printer. I get: " error printing on HP Officejet 4630.»  Printer has a problem that requires your intervention"on computer.

  Then on the printer I get: " unable to print. Press OK to connect the printer to update status. " I press OK then I see"Cancel". "Printer must be connected to the network for this function. No printing.

  WHAT CAN I DO TO MAKE IT PRINT?

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.  Download and run printing HP and doctor Scan.

• HP Officejet 4630: Backup Fax reception

  Hello

  The instructions for my HP Officejet 4630 to turn on the backup Fax reception so I can print the faxes missed memory.  I went through all the fax settings and sub-menus, but impossible to find the backup Fax reception.  Can someone tell me where I can turn that on or off?  Also, if I switch on it and there is an error, when received, do not fax, I'll be able to print the fax failed memory (if I can find where to turn on the Backup Fax reception)?

  Thank you!

  Hi Tmactag,

  Welcome to the HP Forums!

  I noticed that you are trying to find the option to print the faxes missed the memory with your HP Officejet 4630. I am pleased to see that for you!

  According to page 50 of the User Guidefor your printer, it states:

  Reprint of faxes received from memory

  Faxes received, which are not printed, are stored in the memory.

  NOTE: After that the memory is full, the printer cannot receive the fax again until you print or erase memory faxes. You can also delete the faxes in memory for purposes of confidentiality or security. According to the sizes of the faxes in memory, you can reprint up to eight more recently printed faxes, if they are still in memory. For example, you will need to re - print your faxes if you have lost the copy of your last draw.

  To reprint the faxes in memory from the printer control panel

  1. make sure you have loaded paper in the main tray. For more information, see loading page 28.

  2. starting at the homescreen on the printer screen, press up and down to select Fax, and then
  Press OK.

  3. Select settings, and then click missed reprint faxes.

  Faxes are displayed in the reverse order from which they were received with the most recent
  received the fax first, and so on.

  4. Select the fax you want to print, and then select print.

  5. If you want to stop the reprint of the fax, click Cancel.

  Hope that answers your question and have a nice day!

  "Please click the Thumbs up icon below to thank me for having responded."

• E-all-in-one printer, HP Officejet 4630: history of instant ink HP

  When I go to my account and trying to figure out how many pages I printed since the first installation of my printer HP Officejet 4630 e-all-in-one, it does not give me this information.  Is it because I have not installed the new instant HP replacement ink cartridges that were sent to me after that I signed up for the program?  I always use the cartridges supplied with the printer.  If I put the replacement cartridges, it will start following my impression?

  @marlmr

  Welcome to the Community Forum of HP.

  The answer is, "I think, Yes."  The smile.

  I do not use the service, although I recently ask you a few questions about it when I had the chance.

  I remember well:

  Instant ink cartridges are not magic; they are different from ordinary ink cartridges, and there is a way by which the service is able to keep track of the use of ink.

  To get credit, I think that you need move to your new cartridges.

  =============================================================================

  See the FAQ below, including information on the "bearing".

  Information - FAQ:

  Connected HP - Instant ink

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Pavilion 13 p111nrx2: Win10-upgrade, Null, Fax - HP Officejet 4630 series - error 0 x 80070490

  Win10-update, Null, Fax - HP Officejet 4630 series - error 0 x 80070490

  Every day or two, I get this Windows Update failed error (see above).

  Printer: HP 4630 all-in-one

  Computer: HP Pavilion 13 p111nrx2

  Model: E9L41UA

  Operating system: Windows 10

  64 bit

  I completely uninstalled the printer software and reinstalled and reset all my preferences in this regard.  Painful, but did not work.  Also printer keeps going offline and it is supposed to be a wireless printer.  Extremely frustrating to have a wireless printer which never seems to be wireless.

  Someone knows how can I fix the mistake of updating and/or the issue offline?

  Hello
  
  Thank you for using the HP Forums.

  1 start = > settings = > devices = >... . Click and REMOVE an INSTRUMENT: a) Officejet 4630 and b series) Null Fax Printer

  (2) uninstalled all components of 4630 Officejet series in the following order

  HP update

  Improvement of the product...

  Series Officejet 4630 help

  HP Officejet 4630 series based Device Software

  Law 3) clicking Start = > click on MANAGER of DEVICES = > (on my PC) printers = >... .clicked to highlight the Fax Null = > take action in the drop = > UNINSTALL

  (4) restarted my PC

  (5) installed the downloaded/saved full functionality of the HP printer

  (6) again restarted my PC, checked the DEVICE MANAGER (from selection right click Start) - FAX NULL is gone!, check the DEVICES of the SETTINGS (start = > settings), number, NULL, this time FAX - AND - the right HP Fax printer is now installed!

  (7) go ahead and look for the updates, my PC is now updated, no error should appear.

  Hope that helps!

• HP Officejet 4630: Printing on both sides, no option to turn off when you print a Word Doc; When printing Pages

  Recently, when printing, the printer appear uses both sides of the paper, even when we don't want him. There is no option to turn it off when you print a Word document.

  
  When printing Pages it shows a checked box that says BOTH SIDES, if I uncheck, then it works.

  

  But from Word, there is no other choice. I tried the file/Preferences, I tried through the printer settings and nothing we can find will solve this problem? This has recently (last week or two) become a problem...

  Thank you!

  Hello @LaylaWi,

  Welcome to the Forums of HP Support!

  I would like to help you to solve the problem of double-sided printing that you experience when you try to print single-sided computer Mac OS X 10.9 to your HP Officejet 4630 e-all-in-one printer today. Please follow the steps below to disable duplex printing.

  1. Open a Word document
  2. Select file , and then click print
  3. Click on the drop down menu to the Copies and Pages and modify this provision
  4. Uncheck duplex .
  5. To change the additional print settings click on view details.

  -Source

  Ultimately, judging by the useful screenshots that you included in your post, you are in the right place to disable two-sided. You just need to click on the Copies & Pages for the appropriate options.

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP Officejet 4630 - number tab only allows me to use the alphabet and my password all numbers.

  Just create new Officejet4630 all-in-one. Using the wireless network wizzard.  How to make the number numbers of entry of the Panel instead of letters.  I put my word password - what is all the numbers and the wizzard picks it up as letters.

  Thank you

  RO

  Hi RoCryan,

  Please become a member of the community of HP support.  I understand you are trying to enter your network password in the Wireless Setup Wizard to connect to your Officejet 4630.

  When you try to enter a number, you press the number the number your require. While looking at the front panel of the printer when you press a number which has corresponding letters, you should get the opportunity to choose characters that you want by pressing the same number until the character, you have need is highlighted. For example, if you want a '3', when you press the '3' on the front panel of the printer, the first character is a tiny would"; you have to press 3 until the 3 is highlighted (there is place your options ', 'e', 'f' '', 'E', 'F' or ' 3' ").

• OfficeJet 4630: Formerly Geniune HP cartridges installed

  Hello

  Last week, I brought color and black cartridges. Installed the two today back a few minutes, but got previously "used Geniune HP cartridges installed, this message is only for the color cartridge. Do I need to worry? What is this message about? Why do we say "already used"?

  In the ink level display all good show.

  

  Thank you

  Riou

  Hi @RameshRK,

  Thanks for joining the Forums of HP Support with your request message.

  I understand that you have a HP Officejet 4630 e-all-in-one printer you bought a cartridge of black and tri-color and when you put them in the printer, it is said that the Tricolor cartridge has been used previously. I would like to help with that.

  The message is intended to indicate reloaded or counterfeit ink cartridges, but it can also occur when a genuine HP cartridge is depleted or nearly depleted.

  The error message "used, done or false detected cartridge ' refers to rate of rewards. HP Rewards are available when you install a genuine HP cartridge. If you receive this message long after you have installed a new cartridge, you can ignore.

  Here is a document of support that can help you with the message "Already used genuine HP cartridges installed" - "used or false detected cartridge" or "False Advisory cartridge" Message is displayed.

  Please let me know if that solves the problem, or if you need assistance.

• Cannot sweep the all-in-one Officejet 4630

  Hi all - help needed please.

  Recently bought a printer all-in-one Officejet 4630 and had nothing but trouble, set-up and use it. After several attempts to put in place, everything is roughly in order, though I can't yet scan of the control on the machine Panel (I can scan only through "system preferences" under the apple icon).  Whenever I try to scan the engine control panel (and not through system preferences), using either the wireless network (Airscan or whatever it's called) or the USB cable, I have the following message on my laptop screen:

  Task is not available

  The task of "Photo (JPEG)" found on your device is not available on your system. Please select another task.

  The same thing happens if I try to scan to PDF. I use an old (c.2007 MacBook Pro) that runs the OSX10.9.5 Mavericks. Internet connectivity is not a problem because we have the right cable broadband. All I want to do is scan directly from the printer to my computer, preferably using a wireless connection. Help, please.

  Thank you

  Hi @nckbtlr and Happy Halloween!

  I'm sorry to hear about the problems you are having with your Officejet 4630. I understand that you are unable to scan from the front of the printer. I'd be happy to help you with this.

  In the spirit of Halloween, first I have to ask: what did the Mummy to tell the Agent from HP Support?    Let's wrap this case up!

  I suggest to uninstall and reinstall the software. Please follow the instructions below to complete a more comprehensive uninstall than basic uninstall. I know that these steps look long and convoluted, but I made it easy to follow and have confidence that these steps will solve the problem.

  Scrub / uninstall

  • Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers.  Press and hold the Option, control and command, while now the three buttons.
    
  • Click Uninstall.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• OfficeJet 4630: Install new printer - ink cartridge problem

  I'll put up a new HP Officejet 4630. I installed two cartridges of HP61 that came with the new printer. The menu of the poster printer "ink cartridge problem, the following ink cartridge needs to be replaced" followed by a black circle. How a new cartridge would be acceptable?

  Follow-up of your steps. Cartridges still a problem in the printer display.  Took printer at Staples. The store manager confirmed my status then loaded 2 new cartridges (free) the sales basket - printer worked.  Staples deals custormers good!

• HP Officejet 4630: Problem installing HP Officejet 4630

  Hello

  I hope someone in these forums can help me get my printer to work.  I currently have a HP Officejet 4630 who can no longer printer from my computer Windows 10, and I don't know why.  I first had the problem when I upgraded my old computer to 10 Windows, the computer sees the printer, but when it will install the drivers, it says that it cannot connect to the printer wirelessly or wired.  I can print to the printer from mobile devices (iPhone, iPad) simply not my main computer.  I have an older model HP Envy 120 that I can view and print for just fine, but it is my printer to work and I prefer not to use it for day to day general printing which is not a related work.  I think that it is a firewall problem, but to be honest, I don't know how, or what are the changes that I need to check if this is the problem.  When I look at the printer in printers and driver section, it says that the printer is not available and that no drivers are loaded to the printer.  I know that I need drivers, but continuous HP told me no printer is installed and custom install drivers for it.  Help, please

  Dan

  Hello

  Thanks for the comments.

  Are able to disable the firewall during installation?

  Here are some troubleshooting wireless;
  
  Troubleshoot wireless
  1. make sure that the printer is not connected to the network via an Ethernet cable
  Wireless does not work if the printer is connected to the network via an Ethernet cable. Unplug it
  Ethernet cable from the printer.
  1. make sure that the wireless light is on
  If the blue light on the printer control panel is not lit, wireless can be disabled. To turn on the radio, touch
  or drag to the bottom of the tab at the top of a screen to open the dashboard, and then tap (wireless), touch
  (Settings). Tap Settings wireless and then tap wireless to activate it.
  If the blue wireless light is flashing, it means that the printer is not connected to a network. Use the wireless configuration
  Wizard available from the Control Panel printer to establish a wireless connection. Touch or drag to the bottom of the tab to
  the top of a screen to open the dashboard and then tap (wireless), press (settings). Touch wireless
  Settings, tap the wireless configuration wizard, and then follow the instructions on the screen.
  1. make sure that the computer or mobile device is connected to the wireless network
  Make sure that your computer or mobile device is connected to your wireless network. If you cannot connect the
  computer on the network, contact the person who set up your network or the router manufacturer. It could be
  be a hardware problem with the router or computer.
  1. reboot the wireless network components
  Turn off the router and the printer and then turn them back on in this order: router first, and then click Printers.
  Sometimes, disabling devices and then turn their back on helping solve the problems of network communication.
  If you still can not connect, turn off the router, the printer and the computer and then turn them back on in this
  order: router first, then printer and computer
  
  Still problems? Visit the HP (www.hp.com/go/wirelessprinting) wireless printing Center. This Web site
  contains more complete information and up to date on wireless printing, as well as information to help you
  Prepare your wireless network; solve problems when connecting the printer to the wireless network. and solve
  problems of security software.
  Note: If you use a computer running Windows, you can use the tool HP Print and Scan doctor, which can help
  solve many problems, you may have with the printer. To download this tool, visit www.hp.com/go/tools.
  
  Hope that helps.

• HP officejet 4630: HP officejet 4630 does not print

  My printer is not printing. When I try to print now come but it dose not print. I tried to print from 2 computers and same problem. Also tried turing the printer works but the problem persists.

  

  Hi @MichalP,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP Officejet 4630 e-all-in-one printer with a computer Mac OS X 10.11 El Capitan and the printer will not print even though it now says "Printing". I would like to help with that.

  You mentioned that you tried a second computer and it did the same thing. The second computer is a Mac as well?

  I would start by doing a Reset of the power on the printer. Maybe the printer is in an error state.

  

  It looks like the image that you tried to load didn't download successfully so I'm not able to see what it was.

  Please let me know if the power reset helped, or if you need further assistance. If you need to return, please indicate which operating system and uses the second computer.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Officejet 4630: Email address

  I created my eprint and the printer gave me an email address. When I register for their account in the snapshot of ink, it displays a different email address of the printer. I try to change in Hp connected, it gives me an error message. Any ideas on how to get the same email addresses?

  Hey @icehckylvr,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that you are trying to register for instant ink and the email address listed on your Officejet 4630 e-all-in-one printer is not the same as figure on the printer email address. I can help you with that.

  If for the printer email addresses do not match that means one of three things happening:

  1. The printer is not the same physical printer which was originally setup for ePrint.
  2. The associated connected HP account email address isn't used email address initially.
  3. The printer has been reset or had removed from web services.

  Any case, it's what happens there are two ways to solve this problem: find the e-mail address associated with the original account HP connected or remove and enable Web Services on the printer.

  If you decide to find the email associated with the original account, then you will find the account yourself, with no assistance from HP Cloud Services. Unless you already have an instant account ink HP Cloud Services have no way to be able to help find the original HP connected account.

  If you decide to remove and enable Web Services, then:

  1. On the printer, click web services icon that looks like a tablet with a phone beside her.
  2. Click on the button "-" next to settings.
  3. Scroll to delete Web Services and press OK.
  4. From the main screen click the icon of web services again.
  5. Click on I accept and click on Yes.
  6. The printer prints a page with a new claim code, which you can use to add the printer for the current connected HP account.

  Please let me know if it solves your problem. If you have any other questions, let me know and I will be able to help you further.

  I hope that this helps the inscription to instant ink and I hope you have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.
  
  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.