HP Officejet 4630: HP 4630 gets printer fault. Must cancel doc, power off the printer, then restart. There is WI - FI connected

Similar Questions

• I get 467-ESENT-base corrupt data error when starting. I have to turn off the button, then restart. It starts ok after that. Windows xP SP3.

  I asked Microsoft and they have no information about it. I tried two different computer cleaners in hopes that would help. I also deleted all the files that I think are unnecessary. I don't know what then. Help.

  Hello
   
   
  1. have you done any change in software on the computer lately?
   
  Step 1.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  See the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Step 2.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

   
  I hope this helps.

• OfficeJet 4630: Problem printing with Officejet 4630

  I just replaced an OJ4620, who was not black printing, with a new OJ4630.  I am now having a problem with the OJ4630.

  It prints text most very well, but does not always print the Abobe reader messages.  I tried to install a printer driver for the 9800 without great success.  It seems that sometimes it will print the pages of Adobe, but most of the time will not.  I feel guest, and when I click on print, it does not appear that the message arrives at the printer.  The machine will then lock up and I'll have to reboot the system.  The thing that puzzles me is that sometimes the feeling will pass, but it doesn't seem to be a reason that I can understand why it happens.

  I never had this problem with the 4620, but he feels now.

  I have Adobe X and when I check the updates on the site, I thought there is not everything.

  Fran

  Hi @Fran47,

  Welcome to the HP Forums!

  I see that you have a problem with your HP Officejet 4630 of printing when using Adobe Reader on Windows 7. I'm happy to help you!

  A few questions for you:

  • What happens when you make multiple copies? Copy the text or mixed Documents.
  • What happens when you print from other programs, such as Notepad. (The same issue happen?)
  • How is the printer connected? USB or wireless?

  In the meantime, I suggest to try our HP print and Scan Doctorand see if that can solve the problem for you automatically.

  Hope to hear from you soon and thank you for posting!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP Officejet 4630 series: printing error

  Hello

  My printer was fine until 'Windows10 update 1607' has been downloaded on my desk a few days ago. Now every time I try to print anything for my computer. Status reports "error-printing".  I ran the trouble shooter print a test page, I printed a report of diagnosis of HP print and Scan doctor. Everything seems fine, but it always brings a printing error. So now I'm re-printing a document, it now says "printing" on the device, but it feels very, very slow, 10 minutes and it's still printing the first page. What can I do to fix this?

  Your help in this matter is much appreciated!

  Welcome to the community @BeeAnn HP

  I saw your post on the slow printing problem and wanted to do some of my own suggestions.

  You can try the following:

  1 reset the printer, then restart the computer. Make sure that the printer is connected directly to a wall outlet.

  Turn on the printer.

  With the printer, unplug the power cord at the back of the unit.

  Unplug the power cord from the wall outlet.

  Wait at least 15 seconds.

  Plug the power cord into the wall outlet.

  Reconnect the power cord to the back of the unit.

  If the printer does not by itself, press the Power button to turn it on.

  2 run printing scanning and Dr.

  3 try to make copies to see if they are too slow. If they are, then it's showing us that there is a problem with the hardware with the printer.

  4. Uninstall and reinstall the printer driver and software.

  Let me know how make you out!

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  Hi Mpsfeldt,

  Thank you for using communities Support from Apple!

  Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.

  To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.

  On AirPrint - Apple Support

  Best!

• HP OfficeJet 4620, how to scan a legal size document without chop off the end?

  HP OfficeJet 4620, how to scan a legal size document without chop off the end?

  Using the scanning software provided by HP that was installed when you used the HP installation cd

• HP Officejet 4630: Cannot print photos on paper 4 x 6

  I am trying to print a photo 4 x 6 and I get a message saying "HP Officejet 4630 (network) has a problem that requires your intervention.  If I put a picture on the printer to copy, it prints a copy but will not let me print a photo stored on my computer.   I selected the paper of 4 x 6 size.  Can someone tell me what I do wrong?

  Hey @dia1126,

  Welcome to the Forums of HP Support!

  I see that you have some problems with printing photos from your Windows 8 PC to your Officejet 4630 e-all-in-one printer. I can help you with this, but this error message suggests there is an error on your printer when you print. Could you please let me know if you have messages or lights on the printer after trying to print? Once I know that I will be better able to help you.

• OfficeJet 4630: Says printer connected to the network, but computer says that it is not connected or idle

  I can't print to our hp officejet printer range 4630.  The printer says that it is connected to our home wireless network.  However, he said that it is inactive or not connected to the network on my mac.  The only way it will print sometimes is if I switch to a wireless network that is named the same as the printer.  AirPrint does not work.  We have a Linksys router.  Not sure if this is the problem or not.  I ran all kinds of diagnostic impressions on the printer and all say that it is connected.  I also tried to put the ip address into my web browser and it does not find the printer when it is connected to our home network.  Help, please!

  Thanks for trying my earlier recommendations. In my view, the problem you are experiencing may be with your wireless router. Normally, I would have you make sure that it is configured correctly, but you cannot access the built-in Web server.

  I want to try to set a static IP address, so we can try to get in the EWS. Please continue here: printer does not maintain the wireless connection

  A little luck? If you were able to set a static IP address, please try and access the built-in Web server. Follow the steps below:

  1. open EWS (use my earlier recommendations) printers

  2. go to the Network tab

  3. network protocols

  4. Select enable IPv4 ONLY

  Now with IPv4 enabled, you should be able to print wireless.

  If this isn't the case, you will need your router company to make sure that the multicast is enabled, Hello Protocol is enabled, mac filtering is disabled and ask them to check if there are updates the firmware for the router and the router's firewall check to make sure that it does not obstruct the communication

  The following ports are also used by your HP device and may need to be opened on your firewall configuration

  Incoming (UDP) ports are ports of destination on the computer while outgoing ports (TCP) are ports of destination on the HP device

  Incoming ports (UDP)

  137, 138, 161, 427

  Outbound ports (TCP)

  137, 139, 427, 9100, 9220, 9500

  The ports are used for the following functions:

  Print

  427, 137 161 UDP ports

  TCP port 9100

  Download of photo card

  137 138 427 UDP ports

  TCP 139

  Scanning

  427 UDP port

  TCP 9220, 9500

  Faxing

  427 UDP port

  TCP port 9220

  Installation of device HP

  427 UDP port

  Web Services

  80, 443, 5222 and 5223

  Any change? I appreciate your persistence!

• OfficeJet 4630 cannot print from Word 2013

  Hello!

  I bought a printer all-in-one Officejet 4630 a few months ago, and all went well until a few days ago: all of a sudden, I was unable to print Word files (2013), or Notepad files ("the parameter is incorrect" message).

  Printing of PDF files and anything from the Web works fine.

  I did not make any significant changes to my computer or a printer.

  I am running Windows 8.1 on a HP Pavilion laptop.

  I tried to uninstall and reinstall the printer several times.

  I ran printing HP and doctor Scan, and it tells me to reinstall the device software, what I do, without result.

  I checked each forum help on the subject.

  Nothing works.

  Anyone, anywhere, has a solution to this problem?

  Hey @LadySteph12,

  Welcome to the Forums of HP Support!

  I understand that you get the error message "the parameter is incorrect" when you try to print Word and Notepad on your computer Windows 8.1 to your HP Officejet 4630 e-all-in-one printer. I would like to work with you today with the resolution of this problem. At this point, it is not a conflict of driver on your Windows computer.

  Step 1: Uninstall the drivers:

  In order to solve this problem, I will need you to have a nice clean slate to work with. So, I'll have you uninstall the drivers for your printer. To do this properly please follow the steps below.

  1. Open the Start on the computer screen by clicking the Windows button on the lower left corner of your screen or by selecting the Windows key on your keyboard to the right of the Ctrl key.
  2. Once your start screen is open, simply type programs and features
  3. Click on programs and features to open it
  4. Once the list of programs fills in the program programs and features, scroll down until you see 4630 Officejet full series or the base driver package and Uninstall it.
  5. Once your bundle of software and the printer driver is deleted, go to the next step.

  Step 2: Delete the Temp folder:

  1. Open your Start screen again by clicking the Windows button on the lower left corner of your screen or by selecting the Windows key on your keyboard to the right of the Ctrl key.
  2. Under your start screen, type run. Click Run to open it.
  3. In the run box, type %temp% , and then click OK
  4. In the Temp folder, select Ctrl + A at the same time on your keyboard to select everything in the folder. Select "delete" on your keyboard. No files and folders on your computer will be deleted. This only deletes temporary files. If a file is always be used by a program on your keyboard will rise pop to 'jump' the item.
  5. Once your temporary files are deleted, close the Temp folder.
  6. On your desktop, right-click on the recycling bin and left, click "empty recycle bin"

  Step 3: Reinstall the drivers:

  1. Please select the following link to download the appropriate drivers for your printer again: e-all-in-one HP Officejet 4630 Printer series full feature software and drivers
  2. Once downloaded, let the installation program to run
  3. Follow the instructions on the screen to reinstall your printer.

  If you need help with the reinstall, please see:

  Setting up the printer on a wireless network for the HP Officejet 4630

  Install the software of HP Print to a USB connection in Windows 8

  After reinstalling your printer, try printing from Word or Notepad. If the error "the parameter is incorrect" pop up once again, proceed to the next step.

  Step 4: Adding a driver replacing:

  1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
  2. In the start screen, type "devices and printers".
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder right click on your Officejet 4630 and left click on printer properties
  5. Left click on the Advanced tab
  6. Left-click on new driver
  7. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of Printers on the right.
  8. Select HP as the manufacturer on the left
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit next complete the new driver Wizard
  11. Under the printer properties window, select 'Apply' but do not hit OK
  12. Select the general tab
  13. Rename your printer in HP Officejet 4630
  14. Click OK
  15. Finally, right click on your Officejet one 4630 more time and click on Printing Preferences
  16. Left click on the paper/quality tab
  17. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
  18. Press apply and OK
  19. Then try to print from Notepad or Word.

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• OfficeJet 4630: Incorrect printer in Google Cloud Print

  Bad printer premium 6700
  Fix the 4630 e printer - all - en - 0

  Have you added the wrong printer to Google Cloud Print? If this is the case, then simply the following...

  • In the address bar type the Chrome browser: chrome://devices/ and press ENTER.
  • Locate the printer you want to remove and select Manage
  • Then select Delete.

  The old printer has now been removed from your account. You can now go ahead and add a new printer.

• HP Officejet 4630 portable printer: HP Officejet 4630 printer does not print until the computer is restarted

  When I send a document to the printer; It shows in the print queue, but does not print.  When I restart my computer, the document will print.

  The same thing happens whenever I have send a document to the printer.  I have a WiFi connection from my laptop to the printer.  The blue icon on the printer lights indicating that plugged.

  Why does only work when the computer is restarted?  I ran the HP Support Assistant, and it does not find the printer; even if the printer seems to find the computer once I restarted the computer.

  It's embarrassing to say and I'm not very technical interest.  Any suggestions will be greatly appreciated.

  Hi @Maggie78

  Thank you for your patience.

  You can try the following:

  Creating a TCP IP port
  
  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.

  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

  Hope that helps!

• HP officejet 4630 does print the pages

  I have all in one model 4632 and have reinstalled three times.  He continues to not print all pages when printing from my laptop which uses Windows 8.  It prints well unique pages, but as soon as there is more than one page it stops usually half way through the third page. It also does not meet the "print on both sides" function when more of 4 pages. The only printing several pages is a real pain. I often have to do a "page current impression" on every page in order to get a complete printout.

  Hello world

  After working with Microsoft on this issue, which was the root caused a problem with the WSD Port of Microsoft that use to communicate with the HP printer.

  Microsoft has created a new version of the WSD service that I recommend that you install.

  This update can be found here

  http://support.Microsoft.com/kb/3000461

  In our tests, this update helps to address this problem.

• HP Officejet 4630: install printer program on Mac

  Our problem is that even if we plugged our Mac and a printer for printing,-we can´t install the program to the printer on the Mac for scanning and so can´t activate 'Scan to Mac.  Can anyone help us with this as we get desperate enough to scan?  :-)

  Try to update the software by following these steps:

  Click on the Apple icon, then select about this Mac.
  Click software update, and then click the Store from the top of the indicated window menu and click on reload the Page.

  Don't forget to install the available updates.

  Then, install the HP Easy Scan application below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Now go to System Preferences > Printers & Scanners.

  Double-click the printer and select the printer settings, and then click on the utility tab and open the HP utility.

  Now activate the analysis to the computer and check that any differnce...

  Please let me know the results,

  Shlomi

• HP officejet 4630 stops printing in the middle of a print job

  whenever I ask the printer to print more than three pages, it stops in the middle of the 3rd page, sys, she can't key your computer screen closes.  I use a HP Pavilion windows 8.1 and

  Change the TCP/IP, this fixed it for me:
  http://h30434.www3.HP.com/T5/other-printing-questions/HP-envy-4500-all-in-one-printer-error-not-finishing-print/m-p/3502759#M87661

• P1102w stuck initializing after power off the printer

  Product: HP p1102w CE657A printer

  OS: Win - 7 64-bit SP1

  Error: printer not end initialization - time attention and ready lights flash simultaneously and continuously.

  I recently rearranged some furniture in my office and had to unplug all of my electronics in the process. After having everything plugged back to turn on the printer, it is stuck at initialization and will do nothing else.

  I tried the following, not necessarily in the order listed since I was in this for the better part of the afternoon:

  -Taking the wireless and Cancel buttons reset factory default has no effect.

  -I can't access it through the IP address, she had when I turned it off via a USB connection or wireless.

  -I can't print a configuration page to see if it has the same IP address.

  -Whisky.

  -J' uninstalled the drivers for my computer to reinstall the printer.

  -All attempts to reinstall the printer do not have the printer does not communicate with my computer via a USB connection, regardless of the method of installation (SmartInstall starts; installation CD or downloaded that both drivers get to a point where they want to make sure the printer is turned on and connected via a USB cable, and that's what I go with it.)

  -Blasphemy.

  -L' utility Dr. HP Scan can't find the printer and thus do not address it. He was unable to find the printer until the drivers have been uninstalled.

  -Try the steps above using two other computers in the House was just as frustrating and unproductive.

  The printer has not been abandoned, kicked or abused in anyway during the movement of furniture so it may not be the question.

  Similar problems were held with this printer during the summer when I bought my new computer and the printer was disconnected while I was moving some cords. The problem seemed to correct itself spontaneously and I have no idea how I work and what I've done differently.

  Any help would be appreciated.

  See you soon,.

  Boozerbear60

  Usually in this case, the printer does not have a sufficient amount of power. Make sure that the printer is connected directly to a wall outlet. If you are connecting to a lightning arrester, power strip, or rescued food, she is unable to get enough power to complete the initialization cycle. If it does not, follow the steps outlined in the document below the link to try to get the printer to answer. As a last effort before contacting HP on a replacement printer, do a hard reset. I'll post the instructions below. Let me know what happens.

  The printer will not turn on or respond

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.