HP Officejet 4630: Printer not copy

Similar Questions

• HP officejet 4630 could not print error message on screen

  I hope someone can help me,

  Whenever I try to print anything that is more than 1 page in my office or my laptop, the Officejet 4630 printer prints one page and then the part of the second and then I get a message that appears on my monitor saying

  "Printing on HP Officejet series 4630 error the printer couldn't print" and then it gives the name of file or address this point, that I am trying to print.

  I use windows 8 on top of the tower and XP on the desktop

  Thank you for your help in advance.

  ~ O ~

  Hello attaboye,

  Welcome to the HP Forums

  Seeing that you are using a Windows operating system on both computers, please run the HP print and Scan Doctor on each system. If the doctor fails, please let me know where she didn't have and error codes, it can generate.

  I look forward to hear from you.

  Thank you.

• HP officejet: Hp officejet 4630 does not print

  I try to print a document from my computer and all I'm getting are dashes or white sheets. I've only used the pronter 4 times because I got it and 2 out of 4 times are to print or copy. There is ink in both cartridges so I don't know why, it's just Govind me white pages. I tried to clean the cartridges and to align it to see if it works, but the alignment page was not printed correctly. His lack of the printer image and most of the lines on who should be present. I know because I still had the first copy, when I did the alignment. I had this for less than a year and hardly used lrinter so I don't know why this isn't the impression that it should.

  Hello!
  Welcome to the HP community @Alewis324,

  I read your post on print quality issues you are facing with your Officejet 4630 and I wanted to answer with my suggestions for troubleshooting.

  Check out the links below and try the troubleshooting steps. If the quality does not improve, contact HP to discuss alternatives to the printer.

  1. Fixing poor print quality
  2. Printer prints a blank Page or doesn't print black or color ink

  If you have trouble, let me know and I'll do my best to help.

  Click on the thumb to below testify my help!
  Click on the 'accept as Solution' if I'm you guide to a solution!

  Best wishes

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• HP officejet 4630: HP officejet 4630 does not print

  My printer is not printing. When I try to print now come but it dose not print. I tried to print from 2 computers and same problem. Also tried turing the printer works but the problem persists.

  

  Hi @MichalP,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP Officejet 4630 e-all-in-one printer with a computer Mac OS X 10.11 El Capitan and the printer will not print even though it now says "Printing". I would like to help with that.

  You mentioned that you tried a second computer and it did the same thing. The second computer is a Mac as well?

  I would start by doing a Reset of the power on the printer. Maybe the printer is in an error state.

  

  It looks like the image that you tried to load didn't download successfully so I'm not able to see what it was.

  Please let me know if the power reset helped, or if you need further assistance. If you need to return, please indicate which operating system and uses the second computer.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• OfficeJet 4630 does not print on the network

  My printer print is no longer on a network connection, a USB connection. For example, when I try printer in MS Word, the menu of the printer displays "Unable connect", even though I'm perfectly connected to my printer. I've had this printer for about two months, and it has been the case for at least a month. I ran "HP print and scan doctor, and he tells me that there is a driver conflict, but whenever I reinstalled the driver and all software, he repeats the same error message. I also run the program of "troubleshooting HP Installation failure - network", but to no avail. My PC is connected to my router via an ethernet cable, and my printer is connected to my router via a wireless connection, note that I've never had this problem until recently. All reports that I printed state that there is no problem with the connection or the printer, the signal is excellent. I rebooted my router, I reinstalled, I restored default on my printer.

  Hello Adam_C,

  Welcome to the HP Forums! I understand your concerns with your Officejet 4630. I noticed that you have made some necessary troubleshooting steps, and you tried to plug a USB cord to test the connection.

  What is your operating system on your computer? Click here to read: Windows.

  Please follow these steps:

  First of all, to follow this entire document from HP on "Can't find printer" Error Message appears on the computer for a wireless network Installation. This does not include the software to uninstall/reinstall.

  If you get the same error after following all the steps in this document, please let me know.

  Also, I would like to add a port on your computer to a wireless network:

  (1) go to devices and printers on your computer
  (2) right click on your printer
  (3) select printer properties
  (4) select the ports tab at the top
  5) click on add port, select Standard TCP/IP port, and then select new port
  (6) type your IP address of your printer, click Next, and then finish
  (7) click on apply, then OK
  (8) try to print a document

  Impatience on your part.

• OfficeJet 4630 does not scan/copy

  My 4630 prints well but when I scan (or copy) things I get a small image with vertical lines all the way down the entire page (not just the image).  I tried connecting direct wire and wireless - I'm getting the same problem.  Ran 'fix' software with no luck.

  Thank you for your advice.

  Vince

  Hi NaplesVince,

  Thanks for providing the screenshots.

  Sorry, that did not help.

  It looks like a hardware problem with the printer or the scanner bulb.

  I recommend you call HP Tech Support to get help to see what other options are available to you.

  Contact HP worldwide.

  Thank you.

• OfficeJet 4630 do not print on the internet

  I have an Officejet 4630 running out of Windows XP on a USB cable.  (I have a home network set in place as well)  Not for the life of me, I can get this thing to print from the internet.  I get a message "remove" - sent to the printer in the print queue.  But nothing happens.  I can't even remove this task from the queue.  I am able to print from MS Word and test pages.  I ran the doctor of HP print several times and he tells me that everything is fine.  I'm losing my mind here.  Any help would be greatly appreciated.  Please keep what's left of my sanity.

  Nevermind, I got someone to help me.  And of course it was an easy fix after 4 hours fiddling with it.  I got the wrong destination on Google Chrome.  UGH!  All better now.

• OfficeJet 4630 does not print

  OfficeJet 4630 when the sent item to print continues to try to fax it instead of print

  Hi davlyn1,

  Looks like that the incorrect driver is the default. If you don't know how to change the default value, run the HP print and Scan doctor.

  Printing and scanning doctor diagnoses and resolves common printing, scanning and connectivity problems, including:

• OfficeJet 4622 prints not Windows 8, but will print from Linux

  Hello world

  I have an OfficeJet-4622 printer set up on my network (wireless) and two computers. The first is a portable computer running Windows 8, and the second is a desktop running Ubuntu Linux. Both have HP (and HP Setup) drivers installed. When I try to print something from the Windows 8, it will start printing and then say that year error has occurred. The print will be print part of a page, nothing or half of employment and a white sheet.

  However, if 'copy' of the printer, or print from the Linux computer, everything works fine. One thing to note is that I'm using remanufactured cartridges, but they should not cause a problem on a single computer only.

  I am at a loss here, so any suggestions on what to do to solve this problem are greatly appreciated.

  Thank you and have a nice day.
  Patrick.

  I think I solved the problem eventually. On one of the posts of post-its, it linked to a page where you can use the automatic installation wizard. I did, and it reinstalled my driver (s). He had said the previous installation was not completed successfully. So I'll try again to print. The print came out fine. If the previous installation must have been the problem.

• HP officejet j6480-do not copy or scan.

  The Officejet prints well, but will not copy or scan anything on the glass - what is proper. The whole page comes out black and striped - cannot do printing, only a pale reflection of the form of the paper I copy, i.e. a receipt.   I do not see the light 'bar' pass back and forth. Suggestions?

  Hi, Sandy,

  Please, repeat no messages on the same topic.  It is a violation of the COC.  You will find under "Please Don ' t ':

  Post questions that are identical or similar to the questions you have already posted. When someone has an answer to your question, that person will respond.

  Pull the power cord to the back of the unit (with it's ON!)

  Keep #6 on the front of the unit.

  While now the buttons to the bottom of the plug again.

  Continue to hold the buttons for at least 15 seconds.

  May need to try this twice before scans are clean if the unit is ok.  Otherwise, you may need to replace the unit.

  You can also try the steps listed in document scanner failure

• HP Officejet 4630: Print 2 sides of various pages, for example, pages 2 & 6

  HP Officejet 4630, OS X El Capitan

  After several months of print stuff, I realize only now that I can't print only selected pages!

  Ex: Print pages 2 and 6, back to back (2 sides)

  Can it be done?  Y at - it another print app which can print for me if not?

  GWN

  Hi Glen77,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

• HP Officejet 4630: Printing on both sides, no option to turn off when you print a Word Doc; When printing Pages

  Recently, when printing, the printer appear uses both sides of the paper, even when we don't want him. There is no option to turn it off when you print a Word document.

  
  When printing Pages it shows a checked box that says BOTH SIDES, if I uncheck, then it works.

  

  But from Word, there is no other choice. I tried the file/Preferences, I tried through the printer settings and nothing we can find will solve this problem? This has recently (last week or two) become a problem...

  Thank you!

  Hello @LaylaWi,

  Welcome to the Forums of HP Support!

  I would like to help you to solve the problem of double-sided printing that you experience when you try to print single-sided computer Mac OS X 10.9 to your HP Officejet 4630 e-all-in-one printer today. Please follow the steps below to disable duplex printing.

  1. Open a Word document
  2. Select file , and then click print
  3. Click on the drop down menu to the Copies and Pages and modify this provision
  4. Uncheck duplex .
  5. To change the additional print settings click on view details.

  -Source

  Ultimately, judging by the useful screenshots that you included in your post, you are in the right place to disable two-sided. You just need to click on the Copies & Pages for the appropriate options.

  Please reply to this message with the result of your troubleshooting. Good luck!

• OfficeJet 4630: Can not find the Option of Scan OCR

  Installed software for a Windows laptop and if I open the program "HP OfficeJet 4630 Series" / icon on the desktop I can choose the option of OCR of the category of analysis. With the Macbook Pro, I'm on now, I don't see anything like that. There are several programs of HP in a HP folder in the "Applications" folder but none resembles the Windows prorgram and none allow me to scan with OCR option. Where this option on a Mac

  Thank you

  VFN

  I talked to a technician and solve the problem.  For some reason any scanning HP app was not showing in the Mac Applications folder, which it is now. What I don't understand is what OCR really means because I just saved a scanned in the rich TEXT format document and it is editable. It wasn't always the case I think that scanning an image required OCR technology so that it can be modified according to me. So what is the point of the OCR now if it appears as saving an image as a RTF (or other format that I suspect) allows for editing?

  Thank you.

  Sorry for the double post and I check this thread as resolved, although I'd love to hear my understanding of confusion OCR addressed.

• HP Officejet 4630 does not connect to internet

  I have a HP Officejet 4630 using a NETGEAR router.  All my devices on the network can see the printer and print to it.  When trying to get the printer contact HP via the internet, the screen of my printer comes with connection... and he's here.  When I enter the IP of your laptop and you select Web Services, I get the message

  Web Services

  Hey Egan,

  Thank you for the update.  I appreciate it.

  I've included screenshots of the process for your 4630 Officejet set an IP address manual and manual DNS servers.   Please start by disabling IPv6. The screenshots are to set the manual ip address for IPv4.

  1. Please enter the IP address of the printer in the address bar of your browser.

     

  2. Click on the network tab.  Please click on 'Network' in the menu on the left side.

     

  3. Please click on ' network (IP) address "in the menu on the left side.

     

  4. Please click the radial button next to "Manuel IP" then click on the button 'Suggest a manual IP Address'.  IP address manual, manual subnet mask and the Default Gateway manual must complete for you.  Please click the radial "manual DNS Server."  Please enter for the manual preferred DNS Server 8.8.8.8 and 8.8.4.4 for the Alternate DNS Server Manual.

     

  5. After entering the information please click 'apply '.

     

  6. You should now have a screen indicating the changes made have been updated successfully.

     

  7. You should be able to activate the web services now.

• HP Officejet 4630 portable printer: HP Officejet 4630 printer does not print until the computer is restarted

  When I send a document to the printer; It shows in the print queue, but does not print.  When I restart my computer, the document will print.

  The same thing happens whenever I have send a document to the printer.  I have a WiFi connection from my laptop to the printer.  The blue icon on the printer lights indicating that plugged.

  Why does only work when the computer is restarted?  I ran the HP Support Assistant, and it does not find the printer; even if the printer seems to find the computer once I restarted the computer.

  It's embarrassing to say and I'm not very technical interest.  Any suggestions will be greatly appreciated.

  Hi @Maggie78

  Thank you for your patience.

  You can try the following:

  Creating a TCP IP port
  
  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.

  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

  Hope that helps!