HP officejet 5700 sensor problems with cartridge

Similar Questions

• OfficeJet Pro 8630: Problem with cartridges

  Hello:

  They yellow cartridge in the printer ran out of ink.  Normally, this isn't a problem.  I opened my new pack of ink and replaced the yellow cartridge.  The printer freaked out and said that there was something wrong with the cartridge.  Not OK, so I put the old one back, no problem.  Today I went and bought a new series of color cartridges and replaced the yellow cartridge with that of the new box.  No, same thing.  It is said that the cartridge appears to be damaged.  It's new!  It really can't be anything wrong with each cartridge.  Any ideas?  I really need to be able to print some elements in the next day or so.

  I ended up having to buy a new printer. This time, I bought the extended warranty. Thanks a lot for your help.

• HP Officejet 5610: Problem with cartridges

  At the moment I can't print more. Whenever the 'Problem with cartridge' message appears. I use no original HP cartridges. Mid October HP provided for a large number of models of an update to resolve this issue. I have not found a link for my model (Officejet 5610). What can I do?

  Thank you.

  Hello @ErikDC

  Thank you for showing your interest in the HP Forums! I see that you are getting the error 'Problem with cartridge' with Non HP cartridges. I would like to help.

  Your printer has not been affected by this update: dedicated to experience better impression.

  You can try these steps, but no guarantee they will work with the cartridges Non-HP: 'Incorrect print cartridge' or 'Print Cartridge problem' message on the Panel of printer for HP Officejet 5600 all-in - One Printer Series.

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers! Good luck!

• OfficeJet Pro 8620: problem with ink

  Hello. I have nothing else to the HP printers used in my life using the computer - more than 25 years! I bought a new Officejet Pro 8620 2 years. I also bought cartridges refilled at the same time as my father died and I would need to use the printer a lot. Unfortunately, I bought ink another 3 times for this printer, when printing somewhere near 100 pages ALTOGETHER since the purchase. Problem is the printer keeps saying cartridge is not HP and damaged - should replace the HP cartridges. I've NEVER had a problem before using reloaded cartridges. Why change now? Am very close to get back to using my old computer Win XP and more old HP all-in-one printer. I have 3, and none of them has NEVER given any problems.

  Looking for help on this. Have always had confidence in HP before - don't want to lose that now. Last cartridges were new HP, but still having the same problems. Suppliers of ink have been highly evaluated with excellent reviews. Warranty expired a year ago. Haven't had extended warranty because, as I said, never had a problem with HP printers to more than 25 years.

  In addition, cellular internet very limited - and not (!) reliable. 50 miles of the city.

  Yes, I learned a LOT over the weekend. First of all, I ordered a few inkplicity.com ink. Am curious about their ink, with their 1 year warranty. Shortly after ordering, I contacted Fuzoo, who then asked me to photograph both sides of the chip. I had no idea of the chip was removable. And actually, I see on the YoYoInk cartridges that the chip is glued in place. Then, I saw a few chips ink auto reset for sale online. And then began to find a lot of links and messages and articles on the chips of HP and the problems associated with them. Like my old printers were about 2000 or so, I had never met the problems associated with the current chips.

  Now, Fuzoo has graciously agreed to replace not only the Magenta faulty cartridge (which has their 'old' piece), but will send a full order before, which was black (2) and a set of color inks. Can't get much better than this! So it would seem that I'm no longer need an explanation of why this happens - it's all about HP and their need to force their customers (who FREELY CHOOSE to buy their printers) in the purchase of HP ONLY cartridges.

  It is a free country that is stuffed with capitalism. You'd be hard-pressed to get into any grocery store and NO search of generic items just alongside their counterparts in brand and usually for less money. You have car trouble? Generic (non - OEM) parts are available, as well as a lot of rooms refurbished. HP should remember their place in the grand scheme of things, or they will go the way of many other electronics companies. Trying to force customers to pay more for ink is bad. ... So this would increase the cost of the printers in the first place? Yes, probably. I was always ready to buy quality products when I could afford to, and HP printers had always been reliable but also easy to use. With this printer, I swore to the dang thing a lot more that I used it.

  Please, ch, make the message and ease up trying to railroad customers. Even us loyal customers for a long time "' will leave! Don't forget, we are customers of HP by "choice"!

  Problem is now solved. Thank you all for your comments!

• OfficeJet Pro 6835: Problem with the print head - Oxc19a0003

  Just bought the Pro Officejet 6835 this month of April and now the print screen shows "Oxc19a0003, there is a problem with the printhead". Had tried a hard reset of the e power cord does unplugging and is still showin the same error. Can't find a number of HP support, I can call or chat online. Help, please!

  Hello

  Its unfortunate to see this error on a new pritner.

  The error appear while you were setting up the printer for the first time, before installing the ink? (Yes/no)

  The error appear while you have been putting in place of the printer for the first time, after installation of ink? (Yes/no)

  Can I know if you had printed a few pages before the error appeared? (Yes / no)

  The error appear as soon as you switched on the printer? (Yes / no)

  However, please call HP Technical Support for assistance.

• OfficeJet Pro 6830: Problem with printhead

  My operating system is Mac OS X 10.5 Yosemite but who did not have the menu drop down.  In any case, I too more ink for my Officejet Pro 6830.  I ran through the troubleshooting suggestions, nothing worked.  I've unplugged and took ink and back in.  My printer was purchased on 06/05/15.  I do not see the feature that allow the print head be replaced, who would say that my printer it just says: Oxc19a0020 and problem with printhead.  It appears so, there is nothing that can be done other than to buy a new printer?

  Solved!  HP sent me a replacement.

• 2542: problem with cartridge - mail does not

  I have a problem with printing (scratches on print). Contacted HP via support form and received a mail that I get a new cartridge. So far so good.

  In the HP E-mail additional requests for information (address details), replying to the email does not work, and there is also no way to share the info with HP. How to proceed?

  Hello

  I've included a list of country phone numbers support in the link below.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• HP Officejet Pro L7590 problems with new software

  Hello

  I have a HP all-in-one OfficeJet Pro L7590.  I had to move the printer on another computer that is running Windows 7.

  When I install and try to print to the printer does not act as he did with the software that was on the old computer XP.

  What I mean is that the printer will not print double side which is a feature that I used a lot.

  I downloaded and reinstalled the software and downloaded used the HP print and Scan doctor.  When executing this I was told there was a driver conflict so I unplugged the usb cable and drivers have been removed and when I plugged it in new dirivers were installed.

  Always when I go to properties and select Quick economy and printing on two sides he spits a page then the printer acts as if it was out of paper, and then when I press OK on the printer it prints the second page on another sheet of paper.  Note: What is printed on the 1st page prints correctly and what is printed on the 2nd page works properly for printing on the other side, but it is not the other side, but a separate sheet of paper.

  Your help would be MOST APPRECIATED what!

  Note: I repeat that the software that worked under Windows XP has never had this problem.  This new version of the software running under Windows 7 has a problem.

  Hello

  Just to thank everyone who responded to my questions about the problem with printing 2 Facer on OfficeJet Pro L7590 by HP.  I did the following and it seems to have solved the problem of this printer DO NOT print on two sides of a sheet of paper.

  1 deleted all the computer printer software

  2 used the utility available on HP website washer to clean any persistent software that I couldn't find.

  3. set the printer back to factory defaults.

  4 use HP printer Installation Wizard to find and install the fix version of the software that sits on the HP website.

  Thanks again for those who repsonded and I hope the above helps anyone who might read this message.

• OfficeJet 6830 E3E02A: problem with printhead

  It is said in the Panel problem with printhead... Help

  You will need to contact HP, likley you will need to have a replacement printer. From a post of Sunshyn2005, contact technical support HP see the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.  Dial the phone number and to give the agent the number of folder that you just created.

• OfficeJet Pro 6830: Problem with multiple Pages into one file

  I just bought an OfficeJet Pro 6830 problem and have the scanning of several pages in a PDF document.

  I checked and the box advanced settings/file/create a separate file for each page is disabled, but it will not always combine pages.  Registration prompt window upward after finishing first scan.

  Previously I use Desktop 4580 without any problems and the file to automatically create the folder of the current month in Myscan and analysis enable the scan file be save.  It seems that this function was also missing.

  Please advise.  Thank you.

  Hello

  Scan you from the glass flat or the top of the charger page?

  If you use the charger to top of the page, the pages must be taken and analyzed before the scan to finish.

  If you use glass, ensure that the box show the display after scanning is enabled and press scan, click on the button "+" under the preview of scanning to scan the next prior pages by clicking Save.

• HP Officejet Pro 6830: Problem with head of printing and error 0xc19a0020

  Tried on MS 8.1 64-bit and Mac OS.

  Having a problem with the printer.

  Constantly saying problem with printhead 0xc19a0020.

  Tried the troubleshooting suggestions, no results.

  I tried unplugging ink and placed back, even.

  Any suggestions? Should I replace the print head? Possible with warranty?

  Hi @Sergey_Burnos

  You will need to contact HP Support to obtain a replacement. Are you based in the United States? If so, please call 1-800-HP-invent (1-800-474-6836).

  Can you please let us know how you get on?

  Thanks, Ciara

  http://support.HP.com/us-en/document/c04839288

• HP Officejet Pro 6830: problem with printhead

  Error message: there is a problem with the printhead

  I turned printer off and unplugged, rebooted and then same message.

  This link explains with this error msg & steps to follow.

  Most likely, you will need to contact HP support.

  Open this link: www.hp.com/contacthp/
  Then enter your product number or select Auto detection
  Scroll up to "still need help? Fill out the form to select your contact options.
  Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appears.

• Printer Officejet Pro 6830: problem with printhead

  Where can I find a solution (repair or replacement) the problem with the printhead?  Call to Staples made me a call to HP and an automatic reply back to www.support, that got me nowhere.

  This is my first answer on this issue known.  Followed by replys supported.

  Read it here, as your warranty would cover the Exchange.

  More information on the trade.

• HP Officejet Pro 8620: HP Officejet Pro 8620 - problem with wireless connection w/computer

  Hi all

  I recently bought the HP Officejet Pro 8620 and I have problems connecting with my computer.

  I used the Setup Wizard to connect the printer to the wireless network of my University, and when it's over, the blue light of connectivity remains a solid blue and the screen says it is connected, which is great. However, when I use the HP Officejet Pro 8620/software of connection instillation, I always get the message,

  "-L' the entered IP address is either incorrect, or it is another wireless network that has the same name as your network." Please ensure that your printer has this IP or enter the correct address below and click on search. Also, confirm that you wireless network is unique. »

  I did somehow on the printer IP address is copied 100% exactly the same with the points and the message still appears and my printer is unable to connect with my computer. As another option, it says that I can use the host name to find the printer as well. However, the same thing happens. I'll type in the name of host by number and letter by letter, and again, it does not find my printer. In addition, there is only 1 network name so I know I hit the right one. Being a student, it is very important that I get things printed off the coast, it is essential for me to solve this problem. Also, I spent a lot of money on it so I need to work properly.

  It should be easy to communicate that it gives me all the necessary information right in front of me, but as I said, it was not easy or fun experience. I don't really know how IP work addresses but I tried to use all the only thing that I can find that is relevant. From now on, I have to record everything in PDF format on my computer, send me unwanted, printing documents download them on my Galaxy Note 4, connect my phone to the printer using the wireless HP Direct on the Officejet and then finally I can print my things. Yes, it works like this, but it is also a concern and I shouldn't do that. I realize that I can't buy a USB link cable to connect my printer to my computer but I don't want to ride the 2 every time I want to print.

  (Also something to note, since I'm on WiFi from the University, I don't have access to the router of course so I don't know if this is a contributing factor in why things do not work).

  If anyone has suggestions/advice/answers on the issue, please let me know. Thank you!

  Hello @Plz_Help.

  Welcome to the Forums of HP's Support. I understand that you have a problem connecting to your computer and your printer via Wifi from the University. I would like to help.

  The only thing that really POPs, is that you use the network of universities. This can cause a lot of problems.

  Question: When you connect your computer or Note 4 on the network, should a pop-up saying you accept the terms of service? If so, this would prevent an air of challenge the printer properly connected to the network.

  If you had access to the router I would recommend checking the network connection by typing the printers IP address in a web browser. If you can access the printers webserver shipped, then, the connection is fine. If you can't you need to reset the router. Of course, you can do this.

  Also, here's something to consider: If the printer successfully on the network, everyone else on the network will have access to your printer.

  A USB connection will be the most reliable and safe way to go. Another thing, why send your rating 4 print jobs? Why not save the PDF files and connect the computer to the wireless network direct printers? In this way, you can print from your computer.

  Sorry I can't give you a solution ' to do this and it will work. You must convince the universities IT department to get things related.

• OfficeJet 6500 a: problem with internet

  I had a problem. I have connected my tot internet printer with an ethernet cable
  I put my printer on Off yesterday and today I Starter him nut my connecton not worm
  I wanted to print tot something with my phone and he saus that they cannot find the printer
  Should I leave it wath or mode of sleap

  Hi MxJavamen,

  It is okay to turn off the printer.  You'll just have to reactivate it before printing.  Wake of being asleep is an automatic thing - but the printer can not re - turn itself an engine out of State.

  When you turn back on the printer - it should maintain its connection.

  If your printer has been connected but loses the connection, you can check this document for useful steps.

  http://support.HP.com/us-en/product/HP-OfficeJet-6500A-e-all-in-one-printer-series---E710/4083974/model/4083869/document/c02790693/

  I hope it's useful.

  Jean