HP Officejet 6000 609(a): Officejet 6000

I now want to use this printer for black and white text only. This 920 cartridge needs to be replaced and all colour cartridges show as empty.  I didn't print in gray scale and do not use colors for awhile. Can I just replace this cartridge black & white and forget the colors? as these are expensive to replace, and I'm not going to use them?  I don't want to make this investment in color if possible with this printer Officejet 6000 609(a).  Thanks for the tips!

I just bought the Multipack cartridges at great expense... but just for a test before it is replaced, I printed a Test Page.  The old B & W ink cartridge works perfectly, although the colors were very thirsty (I don't need them anyway).   It is a strange behavior, like the last time that the printer has been tried on a document, the results were so washed out as unreadable.

So, "if it ain't broke, don't fix it" applies to me.  Moral: my printer will get the long OK until it is absolutely out of B & W. Then all of the cartridges will be replaced if necessary.  The box has a long service life ).

Tags: HP Printers

Similar Questions

  • OfficeJet 6000: OfficeJet 6000 does not print

    Replace the ink cartridges for Officejet 6000 would not print.  It prints the words Page Windows printer to test a test page of color with a printer icon in the upper right, then at the center of page 4 with a white fill boxes; yellow fill, blue fill and a red fill.  That's all.  I touched a "print test page" and the paper comes out blank, although that normally shake it like the print head moves back.

    Hello @Pistol_shooter, greetings!

    Thank you access the Forums from HP Support for extra support! I see that you are having problems printing using the Officejet 6000. I will do my best to help you with this problem.

    I suggest you first check the empty ink to ensure it is enough ink. Then proceed to clean the print head using the software installed on your computer. Since your computer desktop, double-click the printer icon, the printer wizard / solution Center will open. Go to settings and navigate to the cleaning of the printheads.

    I found a wonderful document that gives you instructions step by step to solve this problem. Please visit: http://hp.care/2dtFaXe

    Please let me know if that solves the problem. Good luck!

    See you soon

    Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

  • Print Officejet 6000 occupies more of the page when printing duplex

    My printer is set by default to duplex print. Whenever I use my 6000 Officejet to print two-sided document printing starts just below it should be at the bottom of this page which he finished much lower than when printing a single page (from the same document).

    For example: if I choose to print a page only from multiple paged it document prints fine, exactly as displayed on the screen. However if I choose to print pages 1 and 2 then printing starts at about 5mm below printing and print finishing 15 mm below where it should be. There is no difference in the width of the impression.

    Hi @Porky007,

    Welcome to the HP forums!

    I understand that you are having problems printing duplex and I will certainly do my best to help once I have gathered a little more information

    1. what version of Windows or Mac do you have?
    2. is the printer connected via USB or wireless?
    3. what program you print from? Have you tried another program?
    4 what even happened if you disable duplex printing?
    5. He made it for all pages or just one?

    Once I have that information I'll certainly look more in things for you!

    In the meantime, if you are using Windows, please download and run the HP print and Scan Doctor and see if it can detect problems for you

  • OfficeJet 6000: Officejet 6000 'stuck' in the wireless status

    After using the printer on a minitour HP with a USB connection for a while, I installed the software on a Thinkpad with a link wireless to a Linksys router. The combination didn't work reliably, so I removed the printer and the laptop software. However, the Officejet seems 'stuck' in a State wireless (blue light on); When I tried a clean reinstall on the minitour (from disk), the installation failed. How can I restore the printer to its out-of-the-box condition and get a clean install with USB connection?

    (I thought the Officejet 6000 is a dual-mode device, but it seems to be either / or machine.)

    Price Buhrman

    Hi BuhrmanP,

    This is the only information available for this model restore network settings.

    This information was given by the manual, page 377. OFFICEJET 6000

    I disable all startup programs and temporarily disable the Antivirus software before installing the printer to see if it will help.

    How to perform a clean boot in Windows.

    I hope this helps.

    Thank you.

  • Cartridge, HP 920 XL: Wireless HP Officejet 6000, the problem of black ink printer

    I have a HP Officejet 6000 wireless printer.  It's 2nd HP 920 XL cartridge that has not worked.  It does not show that it is empty, but it will not be printed.  Our school cannot afford to replace these at this rate.  Please let me know what to do to make this work correctly.

    I removed the printer as my default so that I could use another printer.  When I ran the program again to check for problems, the guest asked me to add the printer returned as default.   When I reconnected it the printer as long as my default, I tested the printer and it worked.  Don't know why remove and then add back in the set, but he did.

  • Officejet 6000 ink

    I have an Officejet 6000 ink and i ' ts was set up to print only in black.  The other day he had run more black ink and to my great surprise, he was also out the other colors of ink.  I bought a new cartridge 920xl and to my surprise that has not fixed the problem.  So the question is that I have all the work ink cartridges can get this printer to print again... ?? .. . If so that was a waste of money by buying the black cartridge, because it costs more than the ink, then what I paid for the printer.

    I'm sorry that you are experiencing this problem with the black print cartridge and printing. You need to replace all the other cartridges so that the printer to print to.

    Some older printers mode allows to print with just black only, but it does not work. Even if you want to print in BLACK ONLY, your color cartridges still used to mix with black to form a TRUE COLOR BLACK. It's only a small amount of each used cartridge, but after awhile, it will need replaced.

    So will have to get the other cartridges back, until the printer reverts to the normal state and printing.

  • Don't print black ink (HP Officejet 6000 E609a Series)

    HP Officejet 6000 E609a Series - do not black ink print ---
    No warning light indicates low ink levels, so I called "solutions Center". The chart shows all cartridges, color and black to be virtually complete. I then replace the black cartridge with a new cartridge 920XL, thinking that the original could be defective. Same as before results! I (1) printed to a printer status report (2) print a print quality diagnostics page, (3) aligned the print heads and (4) cleaned the print heads, all to nothing does not. I even carefully cleaned the container for the black cartridge with a Q-Tip to collect a small amount of excess ink. Color cartridges are printing very well but the black cartridges will not print. (Either by the way, it seemed to happen suddenly, not gradually). I would be sincerely acknowledging all recommendations to solve this problem.
    Thank you... RP

    @ wespikard - here is a link to a document that addresses print quality problems of the model of printer that is mentioned in the first post of this thread. It will give you instructions to solutions that will attempt to correct the output quality of your printer. I hope this helps.

  • HP OfficeJet 6000 Wireless: can I use AirPrint on a wireless HP OfficeJet 6000, model C9295A

    My iPad can not find my HP OfficeJet 6000 wireless, try using AirPrint. This printer can use the AirPrint? I have to update to firmware maybe?

    Hello

    Your printer is not on the following list:

    https://support.Apple.com/en-AU/HT201311

    and not in the following list:

    http://support.HP.com/us-en/document/c02814760#N4001

    You can try:

    http://iTunes.Apple.com/au/app/HP-eprint/id299531647?Mt=8

    Good luck.

  • HP Officejet 6000 a: after far right stuck paper jam

    HP Officejet 6000 a and Windows 10.

    After jam paper and jam, clearing printer turn on, goes through current transport parks, start right, flashing lites power and resume. Doctor says print "general Printer Error. Transport to open the lid does not come to Center and did not manually move parked at the far right. Close the cover, flashing lites power and resume, press summary and unplug the power cord when the cart is centered. Remove print head, close the lid, back the start-up routine. Open the lid and now transport stops in the Center and all the lites normals. With lamp torch and lid open (with cardboard in photo electric switch) and print head installed in position, pressing on the set of the view CV under presses of subsequent print head print head to prevent fresh ink while the printer is in sleep mode, remove the cardboard (lid open simulating) tray does not move downwards releasing the print head. Has gone through all six steps of the Solution and no help. Impossible to open the case to observe the load mechanism. Nothing else to try? Printer purchased January 2011 and printed only 5003 + pages and no problems so far. Do not throw with using more than that most just bought full set XL HP 920HP cartridges. should be possible to solve other than maintenance workshop, can buy nine being the least expensive.

    Help, please. Thank you

    Jesse

    Hi @jlmulanax1,

    Welcome to the Forums of HP Support!

    I understand that this transport on your HP Officejet 6000 a printer does not move correctly. I will definitely do my best to help you.

    I would try the steps in Th guides, r HP Officejet 6000 (E609) and 7000 (E809) Wide Format Printer Series - an "impossible cartridge" or "incompatible cartridge" Message is displayed on the calculationand lights flashing on the HP Officejet 6000 (E609a) and 6000 (E609n) wireless printers.

    You describe it sounds like the transport has stalls and if this is the case and you are unable to find the obstruction while the transport mechanism is defective.

    If you have completed all the above steps and your product still has a problem, service the product.

    Contact HP for service in all countries except Asia-Pacific.

    First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
    Cost of repair out-of-warranty printers may apply.
    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number are displayed.

    Hope that answers your question. Thank you for posting!

  • Impossible to uninstall Officejet 6000 E609 in Windows 10

    Our old Officejet 6000 has been installed long ago (wired, not Wireless no, no ethernet).  The printer has been named our son to use in College with his Macbook.  Since then, our two laptops and one desktop have been improved to 10 Windows.  By doing some cleaning on my laptop, I tried to uninstall the HP Officejet (there many other HP programs associated with it), but it won't uninstall.  Select the option to have all associated programs uninstalled also results in the computer laptop restaring and having still uninstalled!

    How can I uninstall these programs HP?  Try safe mode does not work either.  I know it's no big deal to most people, but I don't see the need for these unnecessary programs to take place on my computer (s).

    Thank you

    Lisa

    Hello list,

    What operating system is your PC upgrded to?

    More likely the installed software is supposed to or an earlier version of windows and Windows 10, so the uninstall program does not work as expected.

    If your operating system has been upgraded to Windows 7, run the utility of following deletion as described below:

    http://ftp.HP.com/pub/softlib/software12/COL31334/bi-77812-3/OJ6000vE609_Scrubber_14.exe

    If your PC has been upgraded to Windows 8 or 8.1 Windows use following instead:

    http://ftp.HP.com/pub/softlib/software12/COL31334/bi-110150-1/OJ_SF_6000_E609_140_408_Scrubber.exe

    Note: If you don't know what version is installed, just follow the two tools.

    Once the folder extracted, launch Uninstall_L4.bat.

    You will see a dialog prompt black box, if noting else happens after 15 seconds press enter once and that the withdrawal will begin.

    Once all completed dialog boxes, restart your PC as instructed.

    Kind regards

    Shlomi

  • HP Officejet 6000 E609n series 'disorder with detected printer.

    Original title - HP Officejet 6000 E609n series

    Printer does not print.  Connected to the network - ok.  Troubleshooting not detected any specific error but listed "trouble with printer detected" at top of list.  Printer agrees and sends the sheet of paper through but it comes out of the Virgin.  This s the only printer on the network and is set as the default printer.

    Hello

    1 did you changes to the computer before the show?

    2. what operating system you have installed in the computer?

    The instructions will help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

    Method 1: Run the fixit:

    Diagnose and automatically fix problems printing and printer

    http://support.Microsoft.com/mats/printing_problems/

    Method 2: R the print spooler service and delete the print queue 

    Start the print spooler service in the Services console

    1. click on Start, clickrun, type services.mscand click OK.

    2. right click on the print spooler service and then clickstop.

    3. right click on the print spooler service and then clickStart.

    Start the spooler service for printing at the command prompt

    1. click on Start, clickrun, type cmdand then click OK.

    2 type the following commands at the command prompt:

    net stop spooler
    net start spooler
    Output

    Note: Press ENTER after each command line.

    Cancel printing

    http://Windows.Microsoft.com/en-us/Windows7/view-pause-or-cancel-printing

    Method 3: Follow the steps in the link:

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Method 4: Delete and add the printer and then check.

    Add or remove a printer (Applicable for Windows 7)

    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

  • HP Officejet 6000 - print hanging folders.

    Desktop computer is an iMac (mid 2007) operating system is Mavericks, printer is Officejet 6000, driver is version 9.4, responsible for July 2014.

    Printing became a bit strange.  A simple page one or two print takes a few minutes to start printing, but after printing, the print file remains in the queue for several minutes.  If I connect before the deletion, it is printed before the machine stops and on the road again after delivery, and it remains in the queue. Even if I remove it from the queue and then sign out, another copy of the file is printed.  Subsequently that it disappears, but it takes a long time.

    If it is relevant (I'm not sure), the "usb" process runs constantly, used by the user _lp (as shown in activity monitor) and use about 35% of the time processor.

    Anyone have any idea, what could be the problem?

    Hi @Road_Runner

    I understand the print jobs stuck in the queue and you encounter printing problems.  Please follow the following steps and let me know the results.

    We will restore the printing system, repair disk permissions and add new printer using the HP driver.

    Reset the printing system

    1. Click on the Apple icon ( ), then click on System Preferences.
  • HP officejet 6000: officejet e609a software

    Hi friends

    I'm at my wits end, I tried to install the software for the officejet 6000 E609a for two days. I continue to receive updates of pilot who want me to pay. I buy a printer of opportunity that I had loads of ink for this one and my laptop has broken with the software on it and I can't find the software for this printer anywhere. Please help I'll seriously crazy I know it must be something that I just miss, but I can't find the it. Help send me a link. I'm connectioning with a key usb and printer and windows can't find the driver and I can't find the download on hp, or anywhere else. Thanks thanks thanks a lot in advance

    Morag

    Hi @momogallas,

    Welcome to the HP Forums!

    I see that you are looking for the software and drivers for your printer HP Officejet 6000 e609a for Windows Vista to. I'm happy to meet you!

    To download the full feature software and driver, please visit this Web site, software HP Officejet full feature and pilot.

    This guide, the Message "Device not found" is displayed in Windows XP or Windows Vista during the Installation of USB, could help if you get stuck at all.

    Hope this is what you are looking for and have a great day!

  • HP Officejet 6000 only print left side of controls. prints everything well.

    HP Officejet 6000 printer, system is Windows7. We use an insurance agency software and I am trying to print checks and the printer only prints the left side of the check and heel.  The software is ok because I can print checks very well of our generalization printer that uses the entire office.  I can print emails, documents, etc. of the Officejet and they print the entire page.  It's just the checks that print weird.  This has even puzzled IT society.  I tried the HP print and Scan Doctor thing, and he said that everything is fine.

    Any suggestions?

    Thank you!!

    I'm back in business now! Print controls very well. We all remote on a server and I got the printer installed on my desktop, but not inside the server, and I don't even think it.

    Thanks for your help!

  • OfficeJet 6000 E609n: HP Officejet 6000 does not connect wireless modem.

    I have Windows 8.1.  My HP Officejet 6000 wireless printer E609n worked well, until the modem is dead and a new one has been installed (new address).  I need to know how to recognize the new network address.  (Note: I tried to install the original installation software, but the CD would run under Windows 8).

    Hi @indyham

    You can use the following link to download and install the full software functionality for Windows 8.1; Printer wireless HP Officejet 6000 - E609n.

    I hope this helps.

Maybe you are looking for