HP OFFICEJET 6313 AIO WIN 7 REQUIRES RUN HP SOLUTION CENTER

Similar Questions

• SOLUTION: Get Win 7 printer drivers/HP Solution Center for work on Windows 8

  Took me some time to understand it, but I managed to do the work.

  First of all, the preliminaries:

  I have a laptop HP dv9700t running the 64-bit version of Windows 8 Pro RTM (not the preview, but I guess it will work as well on the preview).  My printer is a HP Photosmart C7280.  If you have a different printer, it is possible that something similar to how I solved my problem will help you, especially by running your installation in Windows 7 Compatibility Mode files.

  Windows 8 is provided with printer C7280 stock drivers that work by going to control panel > printers and devices > add a printer, but there is only limited to those features.  As such, I wanted to run the HP Setup files have increased functionality.

  Unfortunately, when I run the full installer of HP for my printer, there was no button 'Install a printer', or one of the other usual buttons.  There was only one button "quit".

  Here's how to let him run and install correctly.

  Right click on the HP full installation file, then properties > compatibility > then check the box "run this program in compatibility mode for:", select "Windows 7" in the drop-down list box, then click on 'OK'.

  Run the installation file as you would normally in Windows 7.

  I tried this two ways... first when you're connected via a USB cable.  It works perfectly without error.

  I also tried with the printer connected to the network via WiFi.  A few problems.

  The installation program detects my printer very well, and I clicked 'Next' or 'OK' or whatever the prompt was to install the printer.  The installation would hang 'Response of SNMP' (or something similar) and it would list the IP address of my printer.  I waited, waited, waited for an hour, and it would not go beyond that.  Not to worry.

  Proceed with the normal installation until you get the message 'Response of SNMP' and the installation fails.

  Enter with CTRL-ALT-DEL Task Manager.  You will see an entry in the 'Apps' to the installer of HP... DROP.

  Below the "Apps" list, you will see the list of "background processes".  In this list is something along the lines of "HP Network Interface user", or something similar, consuming a significant amount of CPU.  Highlight this entry and click "End task" downstairs.

  The "SNMP" window closes and your installer will end then normally and your printer/fax/scanner will be installed correctly.  HP Solution Center works normally, like printing, scanning, etc.

  The next person who uses that will give a few comments and also answer a few questions for me so I can update this post with more specific information?

  Please let me know what is the exact "SNMP" message when the installation is blocked.  Please let me also know that the exact name of the background process "HP Network User Interface" is, and the name of app Installation HP.

  I hope this will help you.

  Glad to hear that a form any of my solution works for others.

• The Officejet 8600 can be added to the HP Solution Center?

  The HP Officejet Pro 8600 N911g can be added to the HP Solution Center?   The 8600 was installed on a computer that already had installed HP solutions Center.  However, the 8600 is not detected by the HP Solution Center.

  OfficeJet Pro 8500 Wireless is already integrated in the HP solution on this computer center.

  Windows XP

  Hi Solution Center is used only for earlier models and the 8600 can be added. The 8600 has its own software located by launching the desktop icon for the printer or by accessing it through your programs > HP > product folder

• OfficeJet 4300 Series Windows 7 cannot download HP Solution Center

  Hello

  I just bought a new Windows 7 PC and hung my existing officejet 4315 to it. Fine, I can print with the default win7 driver. My concern is that I do not see the ink levels in the printer on this new PC. The CD supplied with the printer is beyond useless. I scoured the site to download the software and driver HP, but I can't find a link to download the solution Center for this printer for Windows 7 Home Premium 64 bit. Anyone know what I can do to show levels of ink on this printer on this OS?

  Hello javster87,

  The driver for your HP product is integrated into Windows 7 and is known as a driver of (in-OS) system operating. With a driver in the OS, you don't have access to the HP Solution Center and failed to check ink levels in HP Toolbox that you can with a complete driver provided by HP.

  As a workaround, you can print a self test report that can show the ink levels (depending on the printer). To print this report on your printer:

  1 load letter, A4, or legal unused plain white paper in the input tray.
  2. press Setup.
  3. press 2, then press 4 (this selects print the report and then self-assessment report).

  I don't know if this will show the ink level, but it's the only other way to see possibly using this printer on Windows 7.

  http://goo.GL/BSyeE

• HP Officejet 6500 E709n Series: how to install HP Solution Center

  Just added to the printer, but cannot use the scan, fax excetra.

  Hello
  
  Can you try this program to uninstall Microsoft and then reinstall the software features FULL again?
  
  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...
  
  Let us know if it works!

• Solution Center does not work under Windows 7 with Officejet Pro L7780

  Downloaded the latest version of the software for Windows 7 and the first issue was when you try to do an installation complete you get a fatal error at the 96 percent mark when she did the configuration. I looked on the web and found a lot of posts on the same problem. Then, I just uninstalled and made a gradual installation.

  Main printer DRIVER installed first. Then did the functions of imaging followed by the solution Center device.

  Installed everything, but when you run the solution center it says it can't open because incomplete installation.

  The printer works from Windows 7.

  I have an XP machine and Solution Center working on it.

  Any suggestions anyone.

  This thread has resolved the problem installing the software that supports the HP Officejet Pro l7780 for use on Windows 7.

  The event viewer showed mistakes that network location for %APPDATA%\protector.exe is not found.

  Even if I couldn't run the original installation of solutioncenter.msi to work without errors in the log file, without making any changes, which has not completely solved the problem.

  Since solutioncenter, initially did not work, I decided to run solutioncenter.msi manually and look at the log file. See errors in the log file we made changes to the database with Orca solutioncenter.msi. It took us on a long road that does not initially sense that HP would put something out there that produced errors in the msi log file.

  I don't know how the setup.exe uses solutioncenter.msi?

  The changes that doesn't seem it to matter when you run the setup.exe file that is provided in the download.

  If I used the modified solutioncenter.msi or version orginal of it as downloaded from HP running setup.exe site had no importance regarding obtaining solutioncenter work in windows 7, canceled only changes in the solutioncenter log file errors.

  I had to make the following changes to the environment variables to get the full package to work, but what is strange is that I could replace the changeed solutioncenter.msi or the original solutioncenter.msi and run setup.exe, with the following environment changes didn't matter. The solution Center has worked in Windows 7 using one of the solutioncenter.exe and setup.exe.

  Apparently, setup.exe does not use the MSI directely. I think that HP responses suggested that in a previous thread.

  Add these entries (click new...) for the owner user variables and System variables:

  In the name box: APPDATA

  In the value box: %USERPROFILE%\AppData\Roaming

   

  Run setup.exe and event viewer does not display % APPDATA % Scriptures and all work.
  

   

  Thanks for all help on this.
  

• Using the HP OfficeJet CM1312nfi Solution Center

  Why my OfficeJet CM1312nfi will not work with the HP Solution Center?  I thought it was part of the initial installation package.

  Have you served Color LaserJet CM1312nfi?

  The HP Solution Center is a software for consumer inkjet devices and is not a part of the laserjet software.

  probably, it still exists on your PC from an older HP device.

  Kind regards

  Shlomi

• Solution Center is necessary with officejet 8600?

  Just replace an old model of printer officejet with the officejet pro 8600/premium printer. Installed HP Solution Center when I installed the officejet model age.  What I still have to keep HP solution Center or can I uninstall it?

  HP Solution Center was replaced by the HP printer Assistant (at least that is what my Windows 7 computer with a 8600 use).  You could uninstall the older printing software.

  

• I have a HP officejet 4500 AIO is possible to get a dongle to allow it to be wi - fi compatible

  Hello, I have a HP Officejet 4500 AIO which works perfectly, I want to know if there is something I can buy to make it work wi - fi active like a dongle or something or software to install.  I saw the same printer for sale that wi - fi is enabled but no fax.

  Hi Tomo63,

  Any printer Ethernet can operate by wireless by attaching the printer by Ethernet to a wireless router.  It would be the only way.

• For an Officejet 6500 E709n is the required HP Hpzlnt04.dll file?

  For an Officejet 6500 E709n is the required HP Hpzlnt04.dll file?  I was scanning plugins and Printer Monitor specified designation unknown. Then I searched on Google and said results it might be a virus named Hpzlnt04? It is necessary or can I remove it?

  Hi there swishl,

  The file is a library of links necessary for HP printers. If you are worried about the validity of the file from this link. They give a good description of the file and its attributes of text is faith. Hope this helps.

  Good luck!

• HP solutions Center can not run because my series D110 printer AIO installation is not complete

  HP solutions Center can not run because my series D110 printer AIO installation is not finished? Please help me solve this problem! Thank you very much!!!

  Hello, I'm sorry you have a problem with your solution center. You can uninstall and reinstall the drivers and full software features.

  This should solve your problem. Here is a link that can help you to download the drivers. Make sure that it is FULL of FEATURES software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4023246#n212

  Choose your operating system, and then click NEXT.

  Let me know if it helps.

• Cannot find all-in-one OfficeJet 6313 on bluetooth

  I've just set up an OfficeJet 6313 which has already been used by the USB, but I want to use Bluetooth. For some reason, however, when I search for devices I can't find.

  Anyone know if there is a way to turn on the bluetooth? I tried the printer menus, nothing helps.

  Well, I was trying to be helpful.  You'd be amazed at the number of people who do not follow the manual for their printer.

  Have you noticed this:? "Before you print, you must connect a HP bt450, printer and PC adapter with Bluetooth® wireless technology to the HP all-in-one device".

  Have you also noticed that this only provides an impression, not of analysis or fax?

• Printing network for Officejet 6313 freezes

  I have an OfficeJet 6313 cable to a network.

  With a Mac OS 10.5, I can not print even though I can scan. When I print a document from any program, it goes to the queue printing but seems stuck in a random percentage of completion. Thus, for example, the print queue will display 'print page 1 72% complete' or 'print page 1 43% complete', but there is no reaction from the printer.

  Also the printer printed fine via the USB port on the Mac, so I think a network problem?

  Well so be it because I've sorted it finally. The printer has been installed at random as another series that would explain why he couldn't print.

• OfficeJet 6500 Wireless: Win 10 - Solution Center - scan not performed as another program using the imaging device

  I upgraded to 10 Windows on a laptop ASUS, then updated the software for a HP Officejet 6500 E709n Series printer HP solutions Center.

  I can print successfully to the printer but when I open the solution Center and then try to scan an image or a Document, I get the following error "Scan cannot be performed because another program or computer using the networked imaging device.

  Extended error information is 8, [(0.18,-2147467259)]

  When I look in device under imaging devices Manager, two devices are displayed ASUS USB2.0 WebCam (1) and (2) Officejet 6500 E709n.

  It would be much appreciated if someone could help me solve this problem.

  Hi midnight-anwrs,.

  Thanks for getting back to me.

  I looked into your link "Printer problems after upgrade to Windows 10" and 6 "Scan with a scanning application" stage, I found the solution.

  I downloaded the "HP Scan and capture App" and can now easily scan photos and documents.

  Thanks for your help.

  Much appreciated,

  KenRabs

• HP PRoBook 6550 b: HP Officejet J4540 Probook 6550 b 64 bit Win 7 Pro SP1 install - cannot use the sw HP Solution Center

  J4540 installation for 64-bit installations disc installs with success - although the works and so don't scan using the program "Paint" of Windows.  But the HP "HP Solutions Center 's" interface software that allows you to use any print-fax-scan function does not work - it does not install correctly.  This means that I can't scan multi page documents in 1 doc pdf.

  I had a similar problem to install this printer on my Win 8 Pavilion Desktop and am good help on the forum.

  HP PRoBook 6550 b

  Prod # WZ303UT #ABA

  s/n [personal information]

  Windows 7 Pro 64-bit Service Pack 1

  I've installed, uninstalled and reinstalled several times from the disk.

  I downloaded the windows updates

  The Ofc 2007 SP3, I downloaded and installed, in case that this would contribute to

  I downloaded the full feature software and driver for this model and tried to install from it.

  With the full functionality & pilots came "Error of Installation HP - Windows 7.hta" and I followed him with attention for the installation of USB, including disabling my Avast antivirus for one hour on each attempt, disabling a normal startup in msconfig

  After all this sw "HP Solutions Center 's" told me that the installation did not finish, so I uninstalled and retried twice, once the uninstall with the uninstall feature in the exe ' full functionality so & Driver "and once with the program control panel uninstall Uninstall System.  Same result after these attempts "not completely installed.

  Can't believe a HP product on a HP product installation can be this darn difficult.

  Do you have any help?     NB.

  First of all, thank you again for further upward.   I really appreciate your time and efforts.  I successfully completed earlier and tested the installation.  Here is what happened.

  I'm supposed to go again very carefully through your instructions and began uninstalling.  But as I went through this process, I came across problems of functionality - I mean, I could not get either the Windows uninstall or download of sw/driver uninstall function - nothing would happen.

  Then I found (surprisingly) I own the original supplied with the notebook disks (I got this for my son as he was headed for duty in Afghanistan in early 2011).  I therefore decided to back up and reinstall Windows & apps.  But the DVD player would not read discs or discs, although Bishop device says it works correctly.  My son used a lot of music and movies and had trouble with it in Af.  So the original disks were not do me no good.  I tried to create a repair on my GoFlex drive disc, but it does not work I think because the file system is not NTSC (initials right?), but is the Master Boot Record (sounds like the FAT).

  I discovered THE system BIOS before startup offered a recovery option - I used that and today tried to install it on the system and voila!

  I really didn't want to go this route to recovery because I wanted to overcome obstacles and make it work as it should.  Stubborn.  But retirement is only 7-8 years of absence and I had not a lot of time - ha!

  Now, I need to get a replacement DVD + RW and this laptop should be back to the original form, and the battery takes no charge so I guess it expired.  Since he does not need it, I have a pc to use so my wife can play Solitaire on the Pavilion.

  Awesome support both by you and others in the forum.  I am very grateful that you are here and it helped me to overcome the problems.  I learned a little, installs windows and this laptop.  At first I had no idea if I did something wrong, had the wrong approach, or what.

  Thanks again - I cannot exactly call your work a solution, but I was at the point where the complete reinstallation was the thing to do.

  Burton N