HP Officejet 6500 a Plus e-All-in-One - E710n ' slow printing - cannot scan.

Similar Questions

• HP Officejet 6500 a Plus e-All-in-One - E710n Flashing lights, do not print

  It doesn't matter what I do, blinking lights on the printer.  The machine does not print and gives an error every time I try.  I had this problem last week and I cleaned my printer cartridges and the holder and that fixed it, but now the cartridges will move yet for me to check out them.

  Janet

  Hi Katze407,

  It seems that the printer can be stuck somewhere. Here are two guides to help you try to find the problem:

  'Paper jam' message displays on the all-in-one

  "A 'carriage Jam' or ' 0X610000F6" message

• HP Officejet 6500 a Plus e-All-in-One - E710n

  This printer is adjustable to print a selection highlight rather than the page as a whole?

  I assume that you do not want to print part of a Web Page?

  If so, you can check the addon HP Smart printing :

  http://support.HP.com/us-en/document/c02994297

  If not, please specify what software you want to print from.

  Kind regards

  Shlomi

• HP Officejet 6500 a Plus e-All-in-One - E710n I want to print on a standard size postcard

  I want to print on a standard USPS postcard (3.5 x 5.5 "), but I don't know if I can do it. The manual says we can't print out a 3 x 5. I don't know how to load the postcard. When I push the medium on its back where the paper goes... He just keeps flowing back in the recesses of the printer, which would obviously result in a horrible jam. I certainly don't want to cause a jam. Anyone know if this is possible?

  Hello

  Yes, the #24 of the next book page shows you how:

  h10032.www1.HP.com/CTG/manual/c02519721.PDF

  You will also see the #35 page.

  Good luck.

• HP Officejet Pro 8600 e Plus: HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911g and instant ink

  Morning

  Does anyone know if the HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911g is compatible with the instant the ink program?

  Thank you

  Stuart

  @StuartTunstall

  Welcome to the HP Community Forum - we are a community of fans of HP !

  It seems that your printer is not eligible.

  Connected - HP Instant ink > FAQ > my printer is eligible for the moment ink HP?

  I also checked the datasheet for your printer and did not find any indication of instant support of ink.

  Time for a new printer HP brilliant?

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• How to connect a USB modem fax when the phone line is connected to a HP OfficeJet Pro 8600 Plus 4 - all - in-one?

  So I have a HP Office Jet Pro 8600 Plus (4-all-in-one) that I normally use to fax documents for commercial purposes. I became more and more tired for the first printing of documents directly from my computer to be faxed to another office. It is a waste of paper, ink and time. For this reason, I would like to set up a fax modem so I can use Windows Fax & Scan on my Gateway with Windows 7 computer so that I can directly fax documents from my computer to the recipient fax. The only question is, I have a phone line that I use for my fax and which is directly connected to the fax machine, but I understand a Faxmodem USB also plug into a phone line as well. How can I configure the USB fax modem without compromising the current telephone line attached to my fax machine? Do I need a splitter? I can still use my fax machine to receive faxes and fax all paper document not found in my computer (for ex. documents I received by mail).

  It is always profitable read the documentation provided with the device.  If you had, you would know that the software provided with it will allow you to fax documents directly from your computer without printing it and scanning first.  Download the software (and the user's guide - page 63- here.

• Wireless for HP OfficeJet 6500 a configuration more all-in-One on Ubuntu 10.04

  I bought a HP OfficeJet 6500 has more all-in-One CN557A, I want to use with ubuntu 10.04 64 bits as a wireless network printer.
  Before, I bought, I checked the compatibility on www.hplipopensource.org and www.openprinting.org, and everything was in order.
  The machine is detected automatically and fully functional when connected with a usb cable, but I failed to operate as a wireless printer.
  That's what I did:

  I configured the printer on the network (through the interface of the printer), and it connects. It prints a 'Wireless Network Test report', and everything works. I can ping the local ip address and access it via the browser. HP eprint also works.

  I installed hplip 3.11.10 and dependencies manually. I did this because the default hplip in ubuntu 10.04 did not recognize the device.

  I ran 'hp-check', who gave without errors or warnings:

  tjoff@MEK-403-jakbo-01: ~ $ hp-check

  HP Linux Imaging and Printing System (ver. 3.11.10)
  Dependency/Version Check Utility worm. 14.3

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  Note: hp-check can be run in three modes:
  1. check mode (-c or - compilation) compilation: use this mode before compiling the
  HPLIP provided source tarball (. tar.gz or .run) to determine if the appropriate dependencies
  are installed to compile correctly HPLIP.
  2. performance check (r or - run) mode: use this mode to determine if a distribution
  provided package (.deb, .rpm, etc.) or a supplied HPLIP tarball already built
  the appropriate dependencies installed to run successfully.
  3. the two and run-compilation mode check (b or - both) (by default): this mode
  check the two cases above (the two dependencies of compilation and execution).

  Save the output in the log file: hp - check.log

  During initialization. Please wait...

  ---------------
  | SYSTEM INFO |
  ---------------

  Base information system:
  78 - Ubuntu Linux 2.6.32 mek-403-jakbo-01-35-generic # SMP kills Sep 11 16:11:24 UTC 2011 x86_64 GNU/Linux

  Distribution:
  Ubuntu 10.04

  Checking version of Python...
  OK, installed the version 2.6.5

  Checking for version 4.x PyQt...
  OK, version 4.7.2 installed.

  Checking the CUPS...
  Status: Scheduler is running
  Version: 1.4.3
  error_log is defined at the level: warning

  Checking the dbus/python-dbus...
  dbus daemon is running.
  Python-dbus version: 0.83.0

  ------------------------------------
  | COMPILATION AND RUNTIME DEPENDENCIES.
  ------------------------------------

  Note: to check the dependencies only compilation, run hp - check with the parameter - c (IE, hp-check - c).
  Note: to check the dependencies only run time, run hp - check with the parameter-r (IE, hp-check - r).

  Dependency checking: CUPS - Common Unix Printing System...
  OK, found.

  Dependency checking: CUPS devel - development Common Unix Printing System files...
  OK, found.

  Dependency checking: CUPS image - development for the CUPS image files...
  OK, found.

  Dependency checking: DBus - Message bus system...
  OK, found.

  Dependency checking: gcc - the GNU Project C and C++ compiler...
  OK, found.

  Dependency checking: GhostScript - PostScript and PDF interpreter and preview generator...
  OK, found.

  Dependency checking: libcrypto - OpenSSL cryptographic library...
  OK, found.

  Dependency checking: libjpeg - JPEG library...
  OK, found.

  Dependency checking: libnetsnmp-devel - SNMP networking of development libraries files...
  OK, found.

  Dependency checking: libpthread - POSIX threads library...
  OK, found.

  Dependency checking: libtool - building of the library support services...
  OK, found.

  Dependency checking: libusb - Library USB...
  OK, found.

  Dependency checking: make - GNU make utility to maintain groups of programs...
  OK, found.

  Dependency checking: PIL - Python Imaging Library (mandatory for the commandline scanner with hp-scan)...
  OK, found.

  Dependency checking: PolicyKit - administrative framework...
  OK, found.

  Dependency checking: PyQt 4 DBus - Support of DBus for PyQt4.
  OK, found.

  Verification of dependency: Python-DBus - Python bindings for DBus...
  OK, found.

  Verification of dependency: Python-devel - development Python files...
  OK, found.

  Verification of dependency: Python libnotify - Python bindings for libnotify desktop notifications...
  OK, found.

  Verification of dependency: Python XML libraries...
  OK, found.

  Verification of dependency: Python 2.3 or above - for the fax function...
  OK, found.

  Verification of dependency: Python 2.2 or higher - Python programming language...
  OK, found.

  Dependency checking: Reportlab - library for Python PDF...
  OK, found.

  Dependency checking: SANE - library digitization...
  OK, found.

  Dependency checking: SANE - sweep of development libraries files...
  OK, found.

  Dependency checking: scanimage - Shell program scanning...
  OK, found.

  Dependency checking: xsane - scanner Graphical frontend for SANE...
  OK, found.

  ----------------------
  | HPLIP INSTALLATION |
  ----------------------

  HPLIP currently installed version...
  HPLIP 3.11.10 currently installed in ' / usr/share/hplip.

  Current content of ' / etc/hp/hplip.conf' file:
  # hplip.conf. From the hplip.conf.in to configure.

  [hplip]
  version = 3.11.10

  [directories]
  Home = / usr/share/hplip
  Run = / var /.
  PPD = / usr/share/ppd/HP
  ppdbase = / usr/share/ppd
  doc=/usr/share/doc/hplip-3.11.10
  icon = / usr/share/applications
  cupsbackend = / usr/lib/CUPS/backend
  cupsfilter = / usr/lib/cups/filter
  DRV = / usr/share/cups/drv/hp

  # Following values are determined to set the time and cannot be changed.
  [configure]
  network-build = yes
  pp-build = no
  GUI-build = yes
  Scanner-build = yes
  Fax-build = yes
  dbus-build = yes
  cups11-construction = no
  doc-build = yes
  shadow-build = no
  HPIJS-install = no
  Foomatic-drv-install = no
  Foomatic-ppd-install = no
  Foomatic-rip-hplip-install = no
  hpcups-install = yes
  cups-drv-install = yes
  cups-ppd-install = no
  internal-tag = 3.11.10
  limited build = no
  UI-toolkit = qt4
  Qt3 = No.
  Qt4 = yes
  policy-kit = no
  HPIJS-only-build = no
  Lite-build = no
  udev-acl-rules = yes
  hpcups-only-build = no
  HPIJS-only-build = no

  Current content of ' / var/lib/hp/hplip.state' file:
  # hplip.state - runtime HPLIP persistent variables.

  [plugin]
  installed = 0
  EULA = 0

  Current content of ' ~ /.hplip/hplip.conf' file:
  [last_used]
  printer_name =
  working_dir =.
  device_uri = "hp: / usb/Officejet_6500_E710n-z? serial = CN16F2402Q05JW.

  [orders]
  Scan = / usr/bin/xsane v % SANE_URI %

  [installation]
  version = 3.11.10
  Date_Time = 2011-11-16 14:30:35

  [Settings]
  systray_messages = 0
  systray_visible = 0

  [fax]
  Email_Address =
  voice_phone =

  [update]
  rate = 30
  enable = false
  Type = 1

  [survey]
  enable = false
  device_list =
  interval = 5

  --------------------------
  | DISCOVERY USB DEVICES |
  --------------------------

  Device URI scheme
  -------------------------------- -------------------------
  HP: / usb/Officejet_6500_E710n-z? s HP Officejet 6500 E710n-z
  Erial = CN16F2402Q05JW

  ---------------------------------
  | THE INSTALLED CUPS PRINT QUEUES.
  ---------------------------------

  B-403-271-A4-COLOR2
  -------------------
  Type: unknown
  Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-Color

  B403-271-A4-BW
  --------------
  Type: unknown
  Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-BW

  HP-Officejet-6500-E710n-z-FAX
  -----------------------------
  Type: printer
  The URI of the device: hp: / usb/Officejet_6500_E710n-z? series = CN16F2402Q05JW
  PPD: /etc/cups/ppd/HP-Officejet-6500-E710n-z-FAX.ppd
  Description of PPD: HP Officejet 6500 e710n-z, hpcups 3.11.10
  Status of the printer: printer HP-Officejet-6500-E710n-z-FAX is inactive. activated in 2011-11-16 T 01: 00:45 THIS
  Communication situation: good

  ----------------------
  | SANE CONFIGURATION |
  ----------------------

  'hpaio' in ' / etc/sane.d/dll.conf'...
  OK, found. SANE backend "hpaio" is properly set up.

  Check the output of ' scanimage-L '...
  device ' hpaio: / usb/Officejet_6500_E710n-z? serial = CN16F2402Q05JW' is an all-in-one HP Officejet_6500_E710n-z

  ---------------------
  | THE PYTHON EXTENSIONS.
  ---------------------

  Checking the 'cupsext' extension of CUPS...
  OK, found.

  The 'pcardext' Photocard extension checking...
  OK, found.

  Checking extension 'hpmudext' I/O...
  OK, found.

  Checking the 'scanext' extension of healthy MIND scan...
  OK, found.

  -----------------
  | CONFIGURATION OF E/S USB |
  -----------------

  Checking the permissions of attached USB printers...

  For this device HP 0 x 5412 002:005:
  The URI of the device: hp: / usb/Officejet_6500_E710n-z? series = CN16F2402Q05JW
  Device node: / dev/bus/usb/002/005
  Mode: 0664

  ---------------
  | USER GROUPS |
  ---------------

  LP ADM dialout cdrom plugdev lpadmin admin sambashare vboxusers

  -----------
  | SUMMARY |
  -----------

  Without errors or warnings.

  Fact.

  I then ran "sudo hp-setup", chose the device (which has been detected), has chosen my wireless network, enter the wireless security key. On the results of configuration window, I get two messages:
  "Your printer has been correctly configured on the wireless network. You can now unplug the USB cable.
  and
  "The Ethernet cable is plugged to prevent you to connect to a wireless network. For a wireless connection, remove the cable and try again. (VSA000) »
  There is no ethernet cable connected, so I can't remove it. I unplug the USB cable and click on "Finish". What makes the "hp-setup" - beginning of dialogue even more and the printer has not been installed.
  In the terminal, I have the following:

  tjoff@MEK-403-jakbo-01: ~ $ sudo hp-setup
  [sudo] password for tjoff:

  HP Linux Imaging and Printing System (ver. 3.11.10)
  Printer/Fax Setup Utility version 9.0

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  Research on USB bus...
  GET/HTTP/1.1 IoMgmt/Adapters
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/WifiNetworks HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/Profiles/Active HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/Protocols HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  error: missing answer key: ' iorotocols-iorotocol - dd:dnsserveripaddress - 0'
  GET /IoMgmt/Adapters/Wifi0/VsaCodes.xml HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/WifiNetworks/SSID = mVnmXfsu HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET /IoMgmt/IoConfig.xml HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  I then tried to reconnect the printer usb cable and run "hp-toolbox" and click on "Configuration without wireless/wifi via a USB port. Now, I get the error:

  tjoff@MEK-403-jakbo-01: ~ $ hp-toolbox

  HP Linux Imaging and Printing System (ver. 3.11.10)
  HP worm Device Manager. 15.0

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  HP Linux Imaging and Printing System (ver. 3.11.10)
  WiFi Configuration Utility version 1.1

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  error: error writing channel
  error: an i/o error has occurred. Please check the USB connection to your printer and try again. (I/O device error)

  Fact.

  I do not understand how after this point, and any help is welcome.

  A friendly soul on ubuntuforums pointed out, that the wireless configuration is necessary only if the printer is NOT connected to a local area network (W). So everything what I should really do is to configure the printer on the page Administration of CUPS, and it worked. Problem solved. Ridicule me.

• I FORGOT the ADMIN PASSWORD FOR - (WEB PAGE) - HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

  Hi all

  I changed my network SSID & PW but I forgot the password for the printer web page.

  Password was written in a notebook and notebook is moved at the moment by the cleaning person.

  Please HELP! Is there anyway I can reset the printer so that the admin password is also re-set. I try to reinstall the software printers, also I am not able to change the ip address and right now, there is no ip address... get no link and no ip address and no network... Please anyone who can help... Please help.

  * I read some part... to power off the printer, then press the power button on... and continue pressing the back button where he would have, for some time the printer is back back (it was to reset the printer)... which is about 23 times... zero.

  I really want to THANK you ALL for READING THIS & YOUR TIME. So please help if you can...

  and ideas?

  Thank you, xxVEGASxx

  * xxVEGASxx *.

  You can do a reset of the printer using the LED screen on the printer.

  Select Configuration, then Tools, then restore the default settings. "Restore default settings" is the last element of the list and you will have to scroll down to see it.

  Which erases all settings, including the password for the printer.

  To reset you describe is probably the one mentioned in this article:

  http://resetprinters.com/how-to-reset-the-HP-OfficeJet-Pro-8600-premium-all-in-one-printer/

  but it's probably a deeper reset that you really need anyway.

  -Seth

• My HP HPE desktop computer can no longer communicate with my OfficeJet 6500 e7 n - z all-in-one

  My HPE Office has Windows 7 64 bit desktop and OfficeJet 6500 n - z e e7 are wired and fine until this morning when I downloaded and installed a "Coupon Printer' programme of work. When I tried to print a coupon, it wouldn't print. There is no error message. It just wouldn't print.

  Then I noticed that installing printer Coupon had changed the default printer for the fax printer. After that I changed the default value for the 6500 regular he still wouldn't print. I ended up uninstalling the printer Coupon progam but that did not help. The Toolbox of the printer, I learned that "the computer is unable to establish two-way communication with the printer.  The proposed solution was to try to update printer drivers. When I tried it, but the "HP Update" window only offered 'HP Photo création' software, no driver updates. I tried to restore the system to the two most recent previous restore points, but that doesn't work anymore.

  What must I do to re-establish communications between Office HPE and the OfficeJet 6500?

  Hello hansford,.

  There are many other procedures for troubleshooting that you can try to restore the functionality. Click the link below for assistance through troubleshooting:

  http://goo.GL/IFgOc

• HP officejet 8500 has plus: Hp all in one application for the iphone 6 s

  Hi guys!
  
  I jist downloaded the all-in-one application on my iphone 6s and I can't seam to find where the scan registers in fact. There is to save it in my photos?
  
  Thank you
  
  Rocco

  Hello Rocco,

  The HP All In One remote saves scans to an internal folder.

  For easy access to scans, you can click the settings of the app (the icon in the top right 3 points) and then select settings.

  Select sharing, from there you can choose to synchronize Documents and scans will be automatically uploaded to iCloud, then it will be available in your Photos app on the assumption that it is defined on the same iCloud account.

  See you soon,.

  Shlomi

• HP Officejet 5510xi all-in-one: very slow printing

  My printer takes forever to print a single page.  I got faaster to work at some point, but do not remember how and now it is not printing normally again.

  Welcome to the @Mary6268forums.

  I read your post on the matter of slow printing, you face your Windows 8.1 system when printing to your Officejet 5510xi. I have a few ideas in mind below for you to check and try, and I hope they help!

  1 be able to reset the printer:

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  2. run the print and scan the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  3. copy of test. Copies also produce very slow?

  4. print from Notepad. The tests also slowly produce here?

  Let me know the results

• HP Photosmart C4180 all-in-one: can't print or scan

  When I want to print or scan the message "cannot print or scan" and "Scanner failure" happens...»

  When I try to print the document will go to half way and then stops, same message arrives...

  If I want to download and print something good, the printer works!... but again if I try to scan something then it does not work...

  It happened all of a sudden, the printer and the computer have also worked well until this happened.

  I may be low on ink, two symbols like a candle flame, are at the bottom left screen, but a copy or scanning must always be possible even if faded, or...?

  Tried unplugging everything, but no luck...

  Can anyone help? Thank you..

  I am an employee of HP

  Since you said you the error message scanner failure, first try to make a copy and see if the belt scanner moves (moves the light) while copying.

  If the light does not move that it's hardware, you will need to service the printer please call hp tech support.

• HP Officejet Pro 8600 Plus e-All-in-One Printer - model N911g - Nr CM750A print head

  I have the print head seems to be missing, not detected, or improperly installed, a message. Despite all recommendations of HP reselve by train this problem nothing works. What should I do next?

  In general, this error when an electrical connection between the printead and the printer problem.  Have you tried to remove and wipe the electrical contacts of the printhead (at the back) own?

  Thus, there is a document with the steps to resolve this error message.  The document can be accessed here.

  If you follow all the steps and get to the ' four Solution: replace the print head, "then the next step will be to call the HP Technical Support about this problem.

  If you are still in warranty, HP can replace the printhead without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  Technical Support case HP formula call: https://h10025.www1.hp.com/ewfrf/wc/phoneInput?cc=us&dlc=en&lc=en&product=5061082

• HP Officejet 6500 E709n Series (replaced all the cartridges and the printer does not print in color).

  
  

  The upper part and let the carriage to move to the Center or the left, unplug the printer, remove the ink cart. poser pose on the side, hands gray and remove the printhead with a lint or a coffee filter, hormonaly moisten her and essuyer wipe down the contacts at the back of the print head, wipe were also the printhead sits in the printer, reinstall the print head and ink cart., close the cover, don't hold the #3 on the front of the printer and the plug the unit back in When you download release power the #3 and see if that helps the issue.

• Cannot find wireless devices. All-in-one - C309a - "HP printer cannot find your access point"

  Printer: C309a - I have trouble connecting the printer to my wireless network.

  RAN wireless configuration wizard: it ran for a long time but no device not returned.

  Wireles RAN Network Test report: Wireless on - PASS, Wireless - PASS, the name of the network (SSID) found - work FAIL.

  The wireless network Test report shows no IP address on the screen. under mask and default gateway are displayed also as 000.000.000.000

  I have reset to factory settings.

  Other devices took the 192.168.1.250 spot

  My router is visible SSID.

  This is a replacement C309a - my previous C309a - when I ran the test report my previous camera wireless network, said that the radio was not working, so I knew that based on previous posts, that the radio card died and to get a replacement printer. I hope it's a configuration problem and that the wireless on this replacement radio can still work.

  Thanks in advance.

  OK, radio seems OK.  What router are you using?  You've restarted the router by pulling its plug momentarily?

  If anything does not work, we will reset the printer: turn off the power.  Maintain the # and 9 keys while a few seconds after again.