HP Officejet 6500 All - in - One 709 a printhead printer resolution

I want to thank Bob Headrick for his suggestion to soak the print head in warm water for 10 minutes.  It was a fantastic idea.  It does not solve the problem with my printer.

I'm glad that I could help him.  For others looking for the solution for black not printing on the Officejet 6500 a, see the document here.  (Be sure to check the events on solution 6.)  If this does not resolve the problem then soak the printhead as shown in this post can help.

Tags: HP Printers

Similar Questions

  • ePrint HP Officejet 6500 All-in-One-Drucker - E709a

    Hello

    Is it possible to use ePrint with HP Officejet 6500 All-in-One-Drucker - E709a?

    Thanks Chris

    Hi Chris,

    The HP Officejet 6500 (e709a) does not support the HP ePrint service, that you will find listed in the following link:

    http://support.HP.com/us-en/document/c03722645

    Kind regards

    Shlomi

  • Impossible to scan, fax, or copy of HP Officejet 6500 All-- E709a One in

    I can print from my HP Officejet 6500 All - in - One-E709a, but I can't scan, copy or fax.  All drivers and updates are underway; No recent updates have been made before the problems that occur. I use Windows 7 64-bit.  When the printer is turned on, it still shows Original charge, but no documents are in the charger or on the glass (I already cleaned the glass and have ensured that the lid is tightly).  I have problems to scan, copy and fax. The automatic document feeder works.  I tried to reset the printer several times.

    When I try to scan a document into the document feeder (it feeds through) or from the glass, I get varying answers - rarely, he asked well how I save/handle the doc (e.g., save them in pdf format), but the document does not actually scan and I'm headed to reload the document OR it displays no. Scanning Options. The document does not appear in my analysis.

    When I try to copy, it shows the document as copy, but there is a long delay before the progress bar occurs.  When I copy using the document feeder, I actually get a copy (rarely and always disappeared - looking) or copy prints white - two results are always followed by an error message to reload the document.  When you copy from the glass, the copy print in white with an error message to reload the document

    The same problems occur when you try to Fax.   If trying to scan, copy or fax, the printer does a lot of gears whirring noises.

    Again, I can print a document from my PC without any problem, the problem is limited to scanning, faxing and copying.

    I tried the doctor of printing & scanning HP.  It always stops at the HP Twain scanning stage, saying that the scanning process was cancelled by the user (not true).  When I click on continue, it proceeds to the stage of Test analysis, but nothing happens when I click the button of Scan Test.  It only will allow me to ignore at this point.   All the other steps show green checks.

    My first question is really going to reach the merits of the case, I heard you say that the printer produces noise, but if you lift the bar A) trip through the screen and the light cover B) up?

    In addition, perform both of these resets and I would like to know how they are!

    All-in-one HP printer reset - HP Officejet 6500 - YouTube'

    Have a great day!

  • HP Officejet 6500 all-in-One Printer does not send scan and HP print and Scan doctor without help

    HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works.  I looked for help & tried repeatedly, & am willing to renounce HP.

    Hello

    Thank you for using the HP Forums.

    You can try this alternative solution to Scan:

    HP extended Scan

    FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

    Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

    Let us know if it works.

  • OfficeJet 6500 all-in-one - black line down page

    Our newly purchased Officejet 6500 all-in-One is the production pages with thin black lines down the page about 2/3 of the way through the page (right side of page).  Is there a solution to this problem?

    This was only happening with ADF.  After several cleanings with no changes, I found this forum.   After reading the plug on the glass, I went back and really clean the glass.  This has allowed the problem.  Thanks for the forum.

  • My HP Officejet 6500 all-in-one wireless suddenly stopped to print black, even if I have a lot I have

    My HP Officejet 6500 all-in-in-one wireless suddenly stopped printing black, even if I have a lot of ink. It prints all other colors. When I try to check the ink levels it tells me that this printer is not available, try again later. I have a lot of ink. Have restarted printer and Mac Book Pro. Driver is up-to-date. Any thoughts?

    Reset the printer.  Turn the power off and then hold the # and 6 keys during and shortly after turning it on.

  • OfficeJet Pro 8610: HP OfficeJet Pro all-in-one 8610 do not print each attempt

    HP OfficeJet Pro all-in-One 8610 print intermittently

    11/09/2016

    This is a request for additional assistance from HP, Apple and AT & T Community Forums

    Machines and affected software:

    Printer HP OfficeJet Pro 8610 e - All - In - One.

    Serial number: CN4CNE3463

    Last updated: 06/09/16 (Version 5.0 (4.1.1 P, S; 5.17.1 F).)

    iMac 21.5 inch late 2009 (daily use)

    Serial number: W89415S5PC

    OS X El Capitan: Version 10.11.6

    MacBook Pro 13.5 inch late 2009 (occasional use)

    Serial number: W8942UW766D

    OS X El Capitan: Version 10.11.6

    MacBook Air 13.5 inches mid 2012 (daily use)

    Serial number: C02HX3ZADRVC

    OS X El Capitan: Version 10.11.6

    Wireless router: AT & T U-verse ARRIS NVG589

    more AT & T Wireless Access Point VEN501 device

    Wireless Router Range Extender: Linksys RE6500

    Multipoint unresolved printing problem:

    HP OfficeJet Pro 8610 had printed out successfully all the three above mentioned computers since the purchase of the 04/04/2015. End of August 2016 he started intermittently refusing to print wireless, sometimes do not connect wireless or holder from job to job.

    09/06/16 I posted the question on the Forum of community HP between 07/09/16 and 08/09/16 had dialogue on possible solutions. I followed the Commission received and interpreted it following recommended tasks - all without result:

    (1) sequential power off and cord power to the router Range Extender, OfficeJet 8610 Pro and iMac and removal after 60 seconds of powering the devices in the same order. Result: would not print.

    (2) off wireless to iMac. IMac connected to a printer via an Ethernet cable. Printer would not print.

    (3) tried to scan the printer for iMac's wireless: would not scan.

    (4) tried Scan via an Ethernet cable from the printer to iMac: Scan worked.

    (5) connecting iMac via an Ethernet cable to the router and printing system reset iMac to remove the printer and then added printer as directed by its name: HP OfficeJet Pro 8610 [455491]. The results have been mixed:

    (a) wireless to iMac to the router and Ethernet cable router for printer: test page printed.

    (b) the iMac to the router and wireless router for printer: test page will not print.

    08/09/16, having nothing specified by HP Community Forum, I contacted AT & T, the provider of my router and all my services (wireless, broadband, Internet, fixed phone) for the Support service.

    AT & T: recommended

    (1) make a new Setup wireless printing HP itself using my secure wireless network name and password, and then perform a reboot of the router. Between the two actions (new set-up and router reboot), the printer starts and print a previously submitted test page. To confirm that the printer was actually working, I turned off the printer, waited, he turned back and tried to print Test page: the page not print.

    (2) AT & T then told me to do a new manual of the printer setting. Just as I got Set Up on the screen of the printer, the printer prints the Test Page.

    AT & T told me that the printer should work fine now.

    Once I have shut down my system and restarted the 09/09/16, I found that I could not print anyway:

    Wireless to the router for printer

    Wireless to the router and Ethernet cable for printer

    Ethernet cable to the router and wireless to a printer

    Ethernet cable for printer

    Another experiment on 11/09/16 led to erratic printing depends on the original machine:

    1 iMac for HP printer: wireless printer for iMac gives not the Page of Test sent for printing, but a series of blank pages, followed by several pages of code and followed by more white pages. Code pages are all the same and then talking about the Cambria police (body).

    a. the first pages all State: %! PS-Adobe-3, 0% APL_DCS_Encodiong: UFT8% APLProducer: (Version 10.11.6 (Build 15 1)

    b. human beings second page with: 14 start/FontName dict / TJOLUV+ def Cambria

    Page 2 on three subsequent print reading attempts the same as above, except for a different set of letters before "+ Cambria". A UAXKPA, a JJCFBS, and the third is WOKHHG.

    2. yet, when I tried to print the Test Page of the MacBook Air and MacBook Pro wireless, printing is successful (i.e., the test page prints and do not print pages blank and coded.

    I'm sorely need a remedy to this overall situation.

    • What is originally intermittently, the HP printer?
    • What is originally a wireless printing and Ethernet to vary?
    • What is causing the iMac to print Virgin and code pages when the MacBook Air and MacBook Pro both print pages "regular"?
    • The question one demanding a new router?
    • DOE the question indicates the need to uninstall the printer and then perform a reinstall?
    • With all machine software updates could be software problems cross machine?

    Link to the firmware.

  • Officejet 6310 all-in-One fainted during the printing and copying

    I have an Officejet 6310 all-in-one.  I have Windows Vista.  Yesterday, I replaced the black cartridge with HP98.  Now when I make copies or print a document, print the page gets more light and more light, about 1/3 to 1/2 through the page and very light down by a horizontal white line through the text.  I cleaned the cartridge with a damp cloth, I ran the command of cartridges clean but also align the cartridges.  I turned off the printer and unplugged and restarted again.  When I run a self-test page, especially the black line went up to 2/3 of the way, then it is empty at the top and gets darker, then the last 1/3 is fine.  The test pattern shows a few holes in the grid to black.

    I just checked the cushion under the black ink cartridge and it is saturated with ink.  I don't know that is where the problem originated.  I would be very grateful of any advice to solve this problem.

    Thank you.

    Is it a HP cartridge or a charging/reman?  It seems to be a faulty cartridge.  If it is an original HP, then check the warranty of the cartridge as shown here.

    It is unlikely that the ink that you see in the field of the service station is the issue.  The ink that you see is the result of the normal maintenance routine that the printer uses to keep the printheads from clogging.  It is normal that there is ink in this area.

  • Will be A Officejet 6500 all-in-one printed my pictures from my camera using my sheets of Photo 4 x 6?

    Using Windows 7 64 bit and my all in one HP Officejet 6500 a can print photos from my camera on my HP 4 x 6 photo paper?

    The printer handle sheets of 4 x 6 because I do not see a photo paper tray I had in a previous HP printer all in one?

    Thank you for your help. Websites that recommend you explained what I needed to know.

  • OfficeJet 6500 all-in-one: Digital Imaging Monitor

    Is it possible to install only the HP Digital Imaging Monitor for the all-in-one printer 6500.

    Or is it possible to find it on my computer.

    I did the complete basic installation and this is, but then I lost it.

    I had to do a full download / install drivers, who worked...

  • Can not reinstall the software/driver for the Officejet 6500 all-in-one

    I tried to 'day' the pilot on my all-in-one e710n-z printer 6500, and now I have no printer to work at all.  Installation stops at about 80% complete giving the error: Network Installation fails.  I followed all the procedures including online uninstall them, winsock reset, reinstall, install HP utility failure, disabled anti-anti-virus/firewall... nothing works.   My printer is detected by the computer and he "wants" install, but nothing works!  Wi - fi is on, and the only thing that I miss is the driver.  What is the secret of installing the HP online support site?  With the help of Windows OS 8.1.  Thanks for any help!

    Thank you so much for offering to help... This has been a very frustrating experience where I felt like I more, more was wrong.   It turns out that I solved the problem myself with a lot of trial and error and perseverance.  The location of the printer and our computers would not have allowed practical USB or ethernet connection tests.

    The computer has been grateful to the printer, but few of the functions of the printer did not work.  I kept getting notices that I need to be connected to Internet... and yet I was.   Instead, I followed every remedies proposed, and finally met and installed the HP Print & Scan Dr.   The full program would not even install, but I did use uninstall and reinstall the feature on the Dr. P & S and I noticed several MB difference between program he installed and which had been installed until then.

    The error kept showing a network connection problem, but I had already restarted the router several times.  When I got to the printer, I had loaded it a stable and permanent address through the router, so every time I "uninstalled and reinstalled then" software, it always by default the preset number on the router... that has been a blessing!  Finally, I got on the Web site of the real, connected and re-configured router the network connection on the printer using the PIN # that was generated (the WPS buttons had failed earlier) However, it happened, the resumed printer connected and I was able to print a test page.  All is well again.

  • Cannot use the installer for Officejet 6500 all-in-one because of the resolution of the screen

    Hello

    I thought I could install my new Officejet 6500 as a printer network during the weekend, but apparently, HP had a different opinion...

    I use a netbook for my work as I travel a lot. Unfortunately, the screen resolution max available for these computers to wide screen is "limited" to 1024 x 576, which is less than the minimum required by the installation software (800 x 600), so I can't just install drivers and software. I tried to download the drivers from the HP support site, but ran into the same problem again.

    I'd appreciate any help I don't have a desktop or a laptop with a ratio of the 'normal' view and I'm stuck with a machine that is "useless"...

    Thanks a lot in advance!

    Yes. When you get to the window system requirements check, click the button cancel while now the keys Ctrl + Shift. It will bypass the sys. Req. check and continue with the installation. You may need to do this several times for the installation to continue.

  • HP Officejet 4622 - All-in - One -: how to enlarge print on a HP Officejet4622-all-in-one printer

    How can I enlarge printed text on 4622_All all-in-one HP Officejet?

    @lostonprinter

    Printer font size is usually the product of the application that you use to present the work to the printer.

    See below for an explanation to adjust the sizes of fonts on the screen and in the preview before printing:

    Manage the print with preview output before printing

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

  • OfficeJet 7310 all-in-one auto 2-sided printing problem

    Printer all-in-one Officejet 7310 with auto 2-sided does not even appear as a printing options in Windows 7. Is there a driver that will solve this problem?

    Babe7 salvation,

    Can you make a standalone copy from the glass?

    Can you make a standalone copy of the ADF?

    Follow the steps outlined in the document below.

    The ADF (ADF) captures no paper

  • HP officejet 6500 all-in-one - will not print a worksheet excel in landscape mode

    I can print a worddoc in portrait & landscape very well. I can print a worksheet excel in portrait mode, but when I put it in landscape mode, it will print only one or two inches on the left side & is not in landscape format at all. I unintalled and reinstalled my software updates & printing. What can I do to fix this?

    Hi sbclady,

    I would like to help.  You can answer a few questions?

    1. When you did the re-install, you use a disc or a download from hp.com?
    2. If you print a printer status or self-assessment Test report, can you give me the a.) Product # and B.) Version of the firmware of the printer?
    3. If you shut down your computer (not a reset) and a Hard Reset as described in the following link, is there a change?  Click here
    4. What is the operating system for your computer?

Maybe you are looking for

  • Spectrum 13-3001sp RAM

    Hello everyone I looked in the documents on this model but could not find anything? -What are the 8 GB expandable? Thanks in advance

  • update windows xp without sp to sp 3

    Im trying to update my mother in laws COMP. currently, there is no installed sp.  I tried to install sp3, but he told me that I had install sp1 first.  I couldn't find sp1 so I tried sp 2.  He told me that the validation key is invalid.  IM at a loss

  • reading power data acquisition

    Hello I m using a box NI USB-6211 to acquire tension. I m using voltage probes with likely to measure values above the limit of +-10V. The problem is: -The value that I read in Labview (CSR, continues the samples... just a simple read) is not sensiti

  • OK to reinstall the old laptop computer on the new HP printer? Or violaton of the terms of "only on one device?

    Need to remove my old laptop as XP is to expire BUT my HP Photosmart all-in-one printer on the same age (not wireless) isstill continued.  Is this legal and possible to add this printer to my new laptop, so I can print from it or should I buy somethi

  • Windos said my HD 52 GB of free space, but my files are bigger!

    Hello: I use Windows 7-64 bit SP1.In my c: drive properties it says I used GB 52.7 678 available (625 GB free)However, if I select all the files in the root (c:\) including hidden and system, said properties dialog box I used GB 55.5, which is closer