HP Officejet 6500 All - in - One Printer - E709a specifications.

Similar Questions

• HP Officejet 6500 all-in-One Printer - E709a. Failed to install "Solution Center".

  Error message: Solution Center cannot be used because the printer is not over. I did a clean boot and reinstalled the driver and software. The same problem. Lately the problems to get the scan function works as well. Help! I've been going in circles for three weeks.

  Hi iVerbatim,

  The only thing that we rest is to restore the computer. If you can use the scan with scanners and assistant camera or Microsoft paint, then that's what you need to do to move forward. It seems that the operating system and software are in conflict with one another on this system. I would like to know what are your impressions?

• ePrint HP Officejet 6500 All-in-One-Drucker - E709a

  Hello

  Is it possible to use ePrint with HP Officejet 6500 All-in-One-Drucker - E709a?

  Thanks Chris

  Hi Chris,

  The HP Officejet 6500 (e709a) does not support the HP ePrint service, that you will find listed in the following link:

  http://support.HP.com/us-en/document/c03722645

  Kind regards

  Shlomi

• HP Officejet 6500 all-in-One Printer does not send scan and HP print and Scan doctor without help

  HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works.  I looked for help & tried repeatedly, & am willing to renounce HP.

  Hello

  Thank you for using the HP Forums.

  You can try this alternative solution to Scan:

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Let us know if it works.

• Will be A Officejet 6500 all-in-one printed my pictures from my camera using my sheets of Photo 4 x 6?

  Using Windows 7 64 bit and my all in one HP Officejet 6500 a can print photos from my camera on my HP 4 x 6 photo paper?

  The printer handle sheets of 4 x 6 because I do not see a photo paper tray I had in a previous HP printer all in one?

  Thank you for your help. Websites that recommend you explained what I needed to know.

• HP Officejet 7310xi all in one: printer keeps repeating transport jam

  My printer do not print and indicates a carriage jam and told me to open the door and a cart clear jam but there is nothing there, and there is no paper jam. I tried to unplug the machine, its restart, restrting my MAC and the message still flashes. Does anyone have any suggestions. I know this is an old printer, but I love it and want to keep it going. Thanks in advance for any ideas.

  Hello

  Please visit the link below to fix the problem

  http://support.HP.com/us-en/product/HP-OfficeJet-7300-all-in-one-printer-series/391181/model/391190/document/c00304007/

• HP OfficeJet J4580 all-in-One: OfficeJet J4580 all-in-One printer driver missing after recent update Windows 10

  After a recent update of Windows 10, my printer has stopped working. The message is that there is no driver. I tried to download the software from the website of HP and installation, but nothing changes. Copy and scan from the printer functions still work, but I can't print anything my file or on the Web.

  Hi @DMT1,

  Thank you for visiting the Forums from the HP Support! Good day.  I understand that you are looking for help with your printer that does not print after an upgrade of Windows 10. It will be a pleasure to help you here.

  You did your little comments and research before you post your question in the forums of HP. Kudos to you for this.  You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.

  First, to help you better and for more clarity, please let me know if you get an error message when printing, or it just doesn't print at all?

  Some links that might consult to try to resolve the problem:

  Link 1: http://support.hp.com/us-en/product/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645099/document/c04714314

  Link 2: http://support.hp.com/us-en/product/HP-Officejet-4610-All-in-One-Printer-series/5101228/model/5101230/document/c04658195/

  Link 3: http://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/hp-officejet-j4580-all-in-one-printer-does-not/4cf1c8a0-eebc-48f6-bfe5-8a537465b4eb

  I hope this helps. I would like to know how this happens. I hope that the problem is solved without

  disputes and the unit works very well. I'm always here for you help. Please reach out at any time.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Take care now and have a wonderful week ahead.

• HP Officejet 4630 all-in-one printer print cancels in the workplace

  Hello
  
  I recently bought a HP Officejet 4630 all-in-one printer, and it automatically cancels the work in the middle of printing. The computer I use is a dv7 HP Envy with 64-bit Windows 8, and I print on a wireless network connection. My computer receives an error that HP Officejet 4630 series could not perform printing and the printer just says Cancel. I tried all the steps in the sections troubleshooting, both printing and network connections problems. I've uninstalled and reinstalled the software several times, I created a manual IP address and everything, but nothing seems to work. It seems also that the issue when using HP ePrint. It occurs in all sorts of programs and formats such as word, pdf and html. Unfortunately, I did not receive a USB cord, I can't see if that will fix the problem at all. I hope someone can help me with this, otherwise, it is obvious that there is a problem with the actual printer, I have had and I have to return something else.
  
  Thank you

   

   

  This is how I fixed it:

  1. Find out what IP address, is that your printer uses.
  2. Go to control panel, then click "View devices and printers."
  3. Look for your printer right click.
  4. Click on "Printer properties" and a new screen opens.
  5. Along the top, you will see some tabs. Click on the one that says "Ports".
  6. Click on 'Add Port '.
  7. Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port".  A new screen opens.
  8. Click "next".
  9. Type the IP address of your printer, and then click "next".

  Your computer should find your printer.

  Click 'Apply' and your printer should work fine.

• I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

  I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

  Well, if you haven't tried this and then create a coercive power reset:

  Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

  If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

• HP Officejet 5610 all-in-one printer have something that can be attacked by a virus?

  I have a "HP Officejet 5610 All in one printer" running Windows XP Home edition (32 bit).

  I tried to print a file that I had been sent and the printer began to print very slowly (one line / 5 seconds). At the end of the document, which had been printed was a load of rubbish! The next print was ok and printed at normal speed. BUT now, whenever I try to "Scan" a document using 'Microsoft Scanner and Camera Wizard', the 'Wizard' can take up to 1/2 hour to load when it is used for the scanner. If used for the camera the Assistant immediately.

  I downloaded and installed the latest HP drivers and still have the problem.

  Is there something inside the printer [ROM?] that can be attacked or is this a rare case to be an error of 'material' with a four year old unit. It is interesting to try to have it fixed or can I get a new camera? If so, which is recommended for a system of "consumption"? -Many thanks.

  Hi Semajleep,

  I would recommend printing HP and the Scan Doctor running. It is a quick and simple tool that diagnoses and solves many problems of printing, scanning and connectivity. See the link below for more information on how to download, install and run this tool:

  http://goo.GL/MzwLH

  I would like to know if this helps or not.

• HP Officejet g55: alignment of cartridges HP Officejet g55 all-in-One printer has failed.

  Failure of the alignment of cartridges HP Officejet g55 all-in-one printer.

  Please notify. Thank you.

  If you use cartridges done the alignment fails, you must use only the HP cartridge on HP printers.

• HP Officejet 6210xi all-in-one: a HP Officejet 6210xi all-in-one printer can be connected wireless?

  does anyone know if the hp 6210 xi all-in-one can be converted into a wireless printer as well as a wifi network can access and mobile devices?

  Hello

  The HP Officejet 6210xi is one USB printer, it does not offer nay network connectivitu and along such a is not supported.

  You can find the printer specifications below, as listed in section system requirements only a USB port is available for the printer:

  http://support.HP.com/us-en/product/HP-OfficeJet-6200-all-in-one-printer-series/391210/model/391212/document/c00228331#AbT0

  Shlomi

• Officejet 5610 all-in-one printer has been installed and is not printing... Please help... :))

  Officejet 5610 all-in-one printer has recently been installed (I had printer for 4 years) and now does not print...

  Hello

  1. you remember to make changes to your computer?

  2. you receive error messages when you try to print?

  Try the steps in the following article: printer in Windows problems http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• My HP Officejet J3680 all-in-One printer prints sometimes and then stops.

  original title: my HP Officejet J3680 all-in-One printer prints sometimes and then stops.  What should I do?

  My printer was out of paper before I have had already sent a message to print.  Bllinked, meaning light that he was in the paper.  However, when I added the paper it has stopped printing all together.  This has happened on various acassions.  My printer, HP Officejet J3680 all-in-One, has only six months.  In addition, it only prints a copy at once, although I ask several copies.  What should I do?

  You can see in the Forum of Support HP

  HP printers and all-in-one
  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

  Also have a look at these tutorials:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1:
  Check the hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows
  Technical problems of Vista and troubleshooting - printing
  http://support.Microsoft.com/ph/11732#tab11

• OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7

  THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.

  I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.

  Hey 123 problems,.

  You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think