HP Officejet 6500 E709n Series (replaced all the cartridges and the printer does not print in color).

Similar Questions

• HP OfficeJet 6500 E709n: Strange characters in the printer on Windows 8.1 preferences page

  When I use the printer from native Windows applications such as Notepad, Paint, and Wordpad etc., strange Chinese characters appear in the printer preferences window and no option selection is visible or available.   -No error message.   -J' I disable the device and re-installed the latest HP driver software.   -L' unit operate normally, except for the problem of page preferably.

  Hi @JSvWyk,

  Am I assume it looks something like this?

  

  You may need to change the language of your operating system. Research I've done, it seems that some languages, such as English (United Kingdom), cause this hiccup. Please check or change your language to English ( States- United).

  To check or change your current settings, go to control panel and select clock, language and region, and then select change regions. On the Format tab, select English (United States). On the location tab you have the United States in the current location of falling down and then select apply.

  Please let me know if I indeed understood the question correctly, and if the problem is now resolved. Thank you.

• OfficeJet 6500 E709n Wireless - sensor defective yellow cartridge - how to print black only?

  Product is 5 years.  Error message indicates that the yellow cartridge seems to be missing.  Cannot be resolved after several cleanings of sensor and the sensor window. Powered / disable several times including corkscrew. A tried a new yellow cartridge (not a recharged one used).  Shot all the cartridges, cleaned, open/closed status of the printer, lifted/lowered the gray lever of the print head.  Could not find a way to print in black only if possible.  The cost of a new printer is roughly the same Technical Support help (out of warranty).  Any thoughts on how to fix (other than buying a new printer - unless it's time)?  Thank you in advance.

  Figured it out.  I missed some parts of the print head cleaning.  Solved.

• OfficeJet 6500 E709n series: analyse problems in the center of HP solutions and external application (Twain) since winning 10 year anniversary

  I use my all-in-one printer in a network.

  Scan with "ScanToPDF" wich is a solution of Twain.

  Since the aniversy win 10 updated

  -cannot use more ScanToPDF

  -scan with scanner HP Solution gives the same error:
  (Dutch)  Scan kan niet worden uitgevoerd omdat het HP-beeldbewerkingsappraat zich in een network is en wordt door een ander used programma of een andere computer. Try het later opnieuw.

  (translated) Cannot scan as scanner HP of network and is used another computer bij.

  Try again later. 8, [(0.18,-2147467259)]

  tried to fix it by manually forcing Windows updated my drivers (officejet 6500 E709n series). The driver was updated, but no result.

  Scanning with Windows fax and scan (do not use Twain AFAIK) works fine, but produces no PDF.

  Help!

  Hello @Jörg63, hope you are well!

  Welcome to the HP Forum! It is a wonderful location to converse with the community, get help and advice.

  I understand that you are having problems after update to Win 10 of scanning to PDF. I would like to help.

  I'm afraid that HP Solution center may not work in the Windows 10 environment due to some compatibility problems.

  I suggest that you use HP Scan and capture request instead. Capture and scanning HP is a simple application that captures photos or documents to your computer's built-in camera or scanning HP device.  These images can be previewed, edited, saved, and shared to other applications as well.

  Go to http://hp.care/2bUVkrw to download and install the windows scanning and Capture app.

  Please let me know if that solves the problem, or if you need assistance

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Print printer: HP OFFICEJET 6500 E709n series only

  My printer HP OFFICEJET 6500 E709n Series does not print. It is directly connected by a cable to the computer. When I hit the "print" button, there is an error message:

  Not enough memory available

  Check the cable as this may not be connected correctly

  I checked the cable, all right. I rebooted several times. But it didn't ' work.

  Can someone help me?

  Thank you

  What operating system?

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• OfficeJet Pro 8500 a: replacement of the print head

  No yellow does not print at all, who are considering the purchase of the Black/Yellow Printhead to fix this problem.  Just replaced the yellow w/HP cartridge cartridge.  Printhead cleaning several times, tried the alignment (failed twice).  Printer is relatively old (model CM755A, CN12OBR1JJ series) and warranty expired in 2012.  Should I buy a new printer, or replace the print head will definitely cure the problem?

  Hello

  In most similar cases, the replacement of the print head can work sometimes and sometimes not.

  and given that the printer is a bit old, I'd say for an upgrade.

• HP Officejet 6500 a Plus e-All-in-One - E710n ' slow printing - cannot scan.

  Windows 7 64

  HP Officejet 6500 a Plus e-All-in-One - E710n

  Wireless connection

  Until recently, I noticed that it takes a good 45-60 seconds to print. From the moment that I hit print say at the start of the printing printer. Real bummer, but today I tried to scan and got an error "Scanner communication cannot be established... "I've uninstalled all the drivers and the printer and reinstalled same thing any suggestions I have to be able to scan.

  Hey alsmith1964,

  It seems that the network communication between the PC and the printer has become lost or locked up.  The first step, I would suggest in this case is to perform a cycle of power to all devices in the network circuit.

  Follow these steps to reset your printer HP, your router and your computer.

  1. To turn it off, press the power button on the HP printer.
  2. Unplug the power cord at the back of the HP printer.
  3. Unplug the power cord from the wireless router.
  4. Turn off the computer.
  5. Wait 30 seconds.
  6. Reconnect the power cable to the wireless router.
  7. Wait 30 seconds, or until the router is completely ready.
  8. Turn the computer on.
  9. Wait for the computer to recharge.
  10. Reconnect the power cord to the back of the HP printer.
  11. Turn on the printer.

  I would like to know if it is able to get the question to be resolved,

  Jason

• HP Officejet 6500 a Plus e-All-in-One - E710n Flashing lights, do not print

  It doesn't matter what I do, blinking lights on the printer.  The machine does not print and gives an error every time I try.  I had this problem last week and I cleaned my printer cartridges and the holder and that fixed it, but now the cartridges will move yet for me to check out them.

  Janet

  Hi Katze407,

  It seems that the printer can be stuck somewhere. Here are two guides to help you try to find the problem:

  'Paper jam' message displays on the all-in-one

  "A 'carriage Jam' or ' 0X610000F6" message

• 'Click to edit all the properties' does not not in Dreamweaver CC for padding/margins

  Whenever I try to use the option "Click to change all the properties" in Dreamweaver CM³ (the link icon of string in the middle of the box of Magin/Padding), it never seems to work. Or should I use the abbreviation CSS, it lists, up, down, left and right margins/padding separately no matter if I have the chain linked or broken link icon.  If I set it up to connect the four sides, and enter a value in the top, nothing happens on the other sides. It's not until I enter a value towards the bottom it auto fills in the other two sides. Anyone else having this problem?

  I am unable to reproduce the problem where the link in the chain does not update the 4 values all. This works well for me.

  As for the formula of stenography, there's a preference setting that is probably unchecked?

  Go to Dreamweaver-> preferences on a Mac or Edition-> Preferences Windows and go to the section of CSS Styles. If the check box for margin and padding is defined, then you will get a code shortcut otherwise it will not.

  HTH,

  Nithya

• HP Officejet 6500 - E709n: power adapter for the HP Officejet 6500 - E709n wireless all-in-one printer

  I need a new power adapter for my HP Office 6500 - E709n.  Does it matter if I buy an adapter for a model E709a?  Will it work on the E709n?  The power adapter E709a looks identical in the photos.  Thank you.

  Hello

  In fact, they use the same adapter as shown:

  http://support.HP.com/au-en/document/c01636617

  Note: Make sure the 2 sections

  Models all in one HP Officejet 6500

  and

  Power specifications

  Kind regards.

• OfficeJet 6500 E709n series cannot be contacted over the network. Reinstalled, rebooted several times.

  Running Win 7/32 on two different computers HP laptop and updates on 2 iPhones and 2 iPad2s. I also have DirecTV whole House wireless set up through this network. The router is an E4200 of Cisco (Linksys), with the latest firmware and software updates, running Mixed Mode WPA2/WPA encryption.

  I installed, removed, rebooted and reinstalled the printer several times and do not see it, other than on the router's routing tables. I am unable to ping and can't see any (other than Cisco) software.

  I have tried to use the installation wizard 'automatic' in the menu of the printer #8, has made 'restore defaults', is 'advanced configuration', IP address and used auto and even with the SSID and key, I'm headed to an IP address that is not even close to be part of my network. I tried manual IP and combination of wireless configuration and put the IP address that shows on the Cisco Routing table. I tried "restore default settings", and then reinstalled the software after you have uninstalled and restarted everything. I tried HP Network Diagnostic Utility, and it can't find any problems on my network, another it does not find the printer.

  Nothing is allowing me to see the printer, except when I connect it via USB.

  Does anyone have any ideas where I can go for an answer?

  I found a solution validated by PrintDoc that worked:

  A static IP address is always a good idea for a printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you don't know it, enter the current IP address.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the gateway and DNS white. Click on ' apply

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

  -instead of remake "Add a printer", I was able to change the properties of my current setup and add a new TCP/IP port, using the name of the computer, I had specified in the static DHCP entry in my router. Finally, it worked and I'm now able to print again from my laptop and the application of 'Print-N-Share' on my iPad and iPhone.

  Thanks PrintDoc! You got me most of the way and I managed to finish it.

• OfficeJet 6500 E709N series ~ can't print wireless...

  TRIED EVERYTHING ~

  That is: we have a Mac running OSx 10.5.7 and PC with Windows XP and a laptop with windows XP. Our wireless router is a wireless 3 G of Lnksis.

  I bought the HPOJ 6500 e709n yesterday and adjusting upward all night.  Tried it on mac.

  In the first way, I had everything hooked up. Ethernet cable to the router and usb to the printer. Implementation through all phases including Telec. Has been able to print correctly. I was never invited to disconnect the cables but instructions included state you need to test the wireless connection. I did and the printer did nothing. I reconnected the cable and was able to print what was in the QC. However not wireless I tried this several times.

  Sense leads me to test the firewall rules and check out them. I added rules for UDP and TCP allow everyone from the URL given in the network config page I printed from the printer. I also added the mac address to the list of connected devices permits that I added as well access control. I tested several times and also added the printer using the url. After that I did everything that allows all ports to connect could afford to display supply levels for the ink and even print reports of wireless through the Manager printer diagnosis but cannot print documents... WEIRD.

  I loaded each time with the right driver and did everything I can to enable on all ports. The only thing I can think of at this point is that we have a house system that apparently is running on here that I do not give. It really has nothing to do with it, but I changed the URL to begin to manage to 0.100 + that the rep wanted 1-100 used by system here for we are conducting to 192.168. 0,101...

  What should I do?

  OK, there may be something else going on, but try this:

  Remove the Ethernet and USB cables

  Make sure that the radio is on (perhaps not hard to restart the router and printer, too)

  Delete and add the printer on the default tab - one marked with Hello

  Restart the computer and try to print.

• HP Officejet 6500 E709n Series: how to install HP Solution Center

  Just added to the printer, but cannot use the scan, fax excetra.

  Hello
  
  Can you try this program to uninstall Microsoft and then reinstall the software features FULL again?
  
  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...
  
  Let us know if it works!

• OfficeJet 6500 a more connected to the MacBook is not found by the HP utility, although it prints

  I recently upgraded to a Photosmart C5280 All-in-one to an Officejet 6500 has more for use with my MacBook.  The installation process was much more difficult that it should have been, particularly wireless configuration stage (the input field to get the WEP code was not active).  Since the installation of the printer that I use a USB connection to print and scan - I prefer to print using a wireless connection, but this feature seems to not work, even if the onboard display indicates that the printer has connected successfully to our local wireless network.

  I installed the widget dashboard and it detects the levels ink correctly, but when I click on the button of the device to maintain on the widget the HP utility warns me that it is unable to detect the printer, even if the printer is offline, and I can print them out and scan using the USB connection.

  I am also unable to print double-sided, which is an important feature, I want to be able to use.  No double sided button "print" or the checkbox appears in the print menu with all the applications that I usually use (for example: Adobe Acrobat, MS Word, MS Excel, MS PowerPoint).

  OK, OK - progress!

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• My iPad does not recognize not my Officejet 6500 has, unless I turn the printer off and then on again. Why?

  I recently changed my router from BT to Technicolor gateway provided by Utility warehouse.

  Previously, my iPad easily recognized my HP Officejet 6500 printer has (ethernet) but now this isn't unless I have turn the printer off then on again.

  Of course, it is a pain. How can I solve this problem?

  Thank you very much

  Hello

  It seems that the new router may not support multicast or was not configured correctly.

  Networking Hello Zero Configuration Apple is the method of communication used by any Apple device and relies on IP multicast.

  Some routers does not support multicast or maybe this option is disabled by default.

  I wouyld recommend contacting the Technicolor gateway serice provider and check if the access point supports multicasting, or it may require updated firmware or the specific support configuration.

  Kind regards

  Shlomi