HP officejet 6500 printer - printed lines of sepia / orange in the middle of printing a color image

Similar Questions

• OfficeJet 6500 printer E710n-z: Officejet 6500 E710n-z printer is not printing but it says printing doc is printing

  Hp Officejet 6500 printer - E710n - z does not print documents from my PC but will copy the documents placed in the tray of the printer. I set it up as a network printer with a wifi modem in another room. I used the Control Panel, click right in the image of the printer and done research failure, checked the driver (this is the last) and the control panel tells me that the document prints, but nothing happens. I am trying to print with margins of 0.5cms word documents. I tried with 0cm margins and some print and others don't which is the reason why I changed the margins to 0.5cms. I get a warning that the print area is greater than the margin and that some of the document will be lost, but that's okay for me because I am a printing table and you want to cut the paper along the lines of the grid.

  @Marmalade2,

  Looks like it might be a problem with this document, the settings or with Word. Are you able to print from other applications/programs?

  I would like to continue you here: How to troubleshoot printing in Word failures

  I'll watch for your reply.

• HP officejet 6500: HP officejet 6500 printer

  My HP officejet 6500 printer do not print one color... .we just put new ones in... He took command of printing and the paper comes out of the Virgin.

  I went to the HP support team and they had a video to help with "Troubleshooting", they showed me how to reset my printer.  There were several options which I had already tried... so I did the reset partial... .or you unplug and wait 20 min... then hold it at the same time # and number 3 and reconnect the power chord at the same time... It took 7 minutes for the printer run the test of the colours that mine passed... and my printer works now!   Thank you very much.   HP team

  Ma-donna

• HP Officejet 6500 e710n-z principal: impossible to completely remove the software after the replacement of the HP Officejet 6500 printer

  I replaced my Officejet 6500 printer and removed the software using the 10 software removal tool windows.  The software has been removed, but a message appears everytime I start the computer saying that the software cannot find the 2 support files.  I can turn off the message and continue the start up, but it's still a nusiance that I would rather not deal with every time I start my computer.

  Hello

  Open Windows Explorer and type the following in the address bar:

  %AppData%\Microsoft\Windows\Start Menu\Programs\Startup

  Remove the shortcut to "Monitor alerts ink" and restart your PC in order to ensure that the error no longer appears.

  Kind regards

  Shlomi

• HP officejet 6500 printer does not print

  Original title: hp officejet 6500 printer

  I plugged a new HP printer and officejet 6500 computer fax and I cannot print
  We checked what the problem
  It seems to me
  I have another program of the not very active lexmart printer but disturbing new printer
  The problem is that you cannot remove the old software
  She does not appear in Control Panel and I don't know how to solve the problem

  Thank you

  Rachel

  Hi rachel,
   
  I suggest that you follow these steps and check if this helps solve the problem.
   
  Step 1:
   
  Run the printer Troubleshooter and check if this solves the problem.
   
  Step 2:
   
  Check if you find drivers lexmark:
  
  a. log on as "administrator".
   
  b. go to the start menu and in the search box type "MMC", you will see the Management Console Microsoft shortcuts appear in the start menu;. Click on it.
   
  c. back up the file menu and select Add/Remove snap...
   
  d. then scroll down in the list and select the "Print Management" snap-in and then click on 'Add '.
   
  e. in this screen, you will want to select "Add the Local Server", tap on finish, and then click ok.
   
  f. then you can scroll the name of your computer, select the tree drivers and then right click on the driver you want to delete and select "remove driver Package.
   
  h. ensure that you restart your machine before trying to add new or different printer drivers.
   
  Let us know if it works.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• can I use hp officejet 6500 e709 for vistat installation disc to install the printer on a windows7 system

  Can I use a vista for my hp officejet 6500 e709 installation disc to install the printer on a PC windows7

  rhagerty1 wrote:
  

  Can I use a vista for my hp officejet 6500 e709 installation disc to install the printer on a PC windows7

  Hello

  Normally should be ok (as mentioned by Microsoft), but you can go to this website to download the driver & application for your printer under Windows 7.

  Kind regards.

• OfficeJet 6500: Print head cleaning Cycle - why not choose a color?

  I'm having a problem with a single color (magenta) print does not correctly. I've had problems before with black. Why the prinhead cleaning cycle does not allow the selection of a single color for cleaning? Why should I lose the other colors of ink when there is only one that needs to be cleaned? I know that HP wants to sell ink, but be reasonable! That I had problems that appear only after you HAVE installed a new ink tank. And it has not shown using a cartridge to power after best-use-by-date. My guess is that if the ink cartridges are not stored properly the use-by-date means nothing.

  There are a few components of the automatic cleaning cycles.  There are a set of wiper rubber that moved across the printhead to wipe or scrape debris from the print head.  All wiping little ink is spit of each nozzle to lubricate the wiper and help clear the clogged nozzles. The wiper is built on a unique sled with a motor that moves the wipers back and forth.  Allowing single color cleaning would require a much more complicated mechanical system, with four distinct and motors wipers to control.  (The wipers should be dedicated for each color.  She would cause the nozzle clogging if the black ink is allowed to mix with the color and would cause if different colors used the same color mixing wiper.)

  Similarly, for your Officejet 6500, there is a pump system for a more energetic cleaning or for initial priming of printhead.  If it was designed for a single use of color, then a more complicated system, with four independent pumps and controls.

  A Mater of reliability and economics, it is not practical to have separated in level printers cleaning cycles.

• OfficeJet 6500 printer ONLY print landscape

  Hi, I have an Officejet 6500 (E709n).  I also have Windows 7 64 bit.

  I did nothing yet suddenly the printer started printing in landscape, even though my settings call for the portrait.  It has a new pop of the print window. (First default window appears select print, then it coils, then jumps to the top of the final window which is the new.) The following image is what I'm talking about.  All my settings are correctly defined and yet it still prints as shown in the picture.

  Thanks in advance for any help!

  

  Hello MomToMVS
  
  After looking into your problem, a bit I found a thread on another forum with what appears to be exactly the same problem. Below I will include a link the the wire and instructions on what has been done to solve the problem. I would like to know if it works or not.
  Firefox default print landscape
  
  1. in the web in Firefox address bar type about: config and press ENTER. (it can warn you about changing settings here just click OK to continue)
  2. Locate the print.printer_NAME OF PRINTER.print_orientation (where the PRINTER NAME is the name of your printer) and right click on it and click Reset.
  3. conclusion of the tab, and try again (it may be a good idea to restart Firefox first).

• Can I print on canvas of the HP Officejet 6500 printer?

  I want to print on canvas paper. I don't know if my printer model (it's a Scanner printer Officejet 6500 Fax) is compatible.
  In Print Options, I don't have the option of canvas. I looked for HP paper canvas online and is that big rolls that are too wide. I was wondering if I could buy paper canvas of another brand and would it work?

  Hello

  ================================

  Probably best to check with HP, their documentation online support and ask in the forums of HP.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• OfficeJet 6500: prints too small

  Using a printer OfficeJet 6500 wireless on Windows 10 system. I try to print a chart (dress model) of a PDF with Adobe Reader.  There's a graphic box that needs to be 4 "square but mine test prints in 3" squares. I reloaded the software, rebooted the printer and tried from another computer. All with the same results. I see nothing in the print area of drive to change the size of the print (suggestion was 'real size').  Any suggestion?

  I suggest you install Acrobat DC (free) from Adobe.  It has options for 'Real size' or setting the scale a specific % of size.

  

• OfficeJet 6500 printer a wireless set up correctly, but my laptop does not see the printer.

  E710 OfficeJet 6500 a Plus

  Laptop Dell Windows 7 64 bit version

  The printer is set to work wireless.

  I have the printer set in place.  I could print my wireless test report and have determined "That I have successfully setup my printer wireless."  But when I try to configure the printer on my computer and it asks IP... I give the IP address and it did not recognize the "Can't find printer" looks like I have witnessed this process again and again today.

  I disabled my firewall by following the instructions.

  I used the tool for "troubleshooting your connection to a network printer" stage 5 "

  Then he told me to go to the HP support forum.

  Help, please.

  Thank you

  DB64

  I had charged down the bad print driver.  My printer is a more... years had loaded the wrong printer driver.

• HP officejet 6500 printer makes grinding noise

  Original title: interview on hp officejet 6500 wireless

  The printer in question is squeeking theyr. Is there a maintenance process on the varioue rollors paper passes over?

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You get the creaking in the HP printer.

  This can happen if the rollers are not clean.

  I suggest you follow the steps in the site mentioned:

  The product makes noise when printing

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c01931887&lang=en&LC=en&product=4083871

  If the problem persists, I suggest you obtain help on the site:

  http://h30434.www3.HP.com/T5/other-printing-questions/HP-OfficeJet-6500-makes-a-squeaking-noise-when-printing/TD-p/377525

  I hope this helps. If you need additional help, let us know and we would be happy to help you.

• OfficeJet 6500 - printer constant jams

  I just bought the Officejet 6500 a week ago.  No problem installing.  But, I noticed that I can print on 2-3 pages, then the printer starts to jam.  Real jams... I need to remove the paper and unity two-sided... only to have jams more once I print on more than 2-3 pages.  It is a constant, annoying and time consuming problem.  What is a problem for all printers Officejet or just the 6500 Series?  I saw the link on the cleaning rollers... I intend to give this option a try tonight, but I was wondering if there are other tricks or methods to solve this problem.  Any help is appreciated.  Thank you!

  As long as you are standard weights and quality office paper, I think you may have a bad printer (I'm sorry about that).

  I have a J6500 prototype printer in my lab at home and it was a great performance for me.  My suggestion is to share the printer.

• OFFICEJET 6500: PRINTING INK BLACK

  Get copies in black, but the printer does not print black  Printing configuration report shows the color cartridges, but the black cartridge is empty.  I installed a new cartridge and, as I said, I can copy in black.

  Document here has troubleshooting which can help solve the black does not print on your Officejet 6500 be sure to check the vents.  If the above does not resolve the problem, the message here can help.

  Note that black copies are in fact in the color ink to make composite black.

• OfficeJet 6500 prints a bright black text and blur gray/mast

  
  

  Also, I have the OfficeJet 6500 and had the same problem.  Black text was printing with a mixture of colored inks rather than black ink, resulting a gray, fuzzy text.   I finally found a solution.  In each application under Page Setup, there is an option called "Format for".  Mine was created for "any printer".  I changed that to "Officejet 6500 E709n [830E4A]" and now it prints black very well.  I have a Mac running 10.4.11.  I hope this helps.