HP Officejet 6600: Connection error when you try to use the Apps?

Similar Questions

• 2072 AND 2126 ERROR when you try to use the printer

  ERROR 2072 AND 2126 WHEN YOU TRY TO USE THE PRINTER?

  Hello

  1. What is the brand and model of the printer?

  2. What is the exact error message you get?

  3 when was the last time you were able to use the printer?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If the issue does not get resolved, then you can move on to method 2.

  Method 2:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Hope this helps and keep us informed if you need help.

• Error when you try to use the webcam: Please plug in a supported WebCam

  camera on my Dell

  When I try to use the camera on my Dell, message says "please connect WebCam supported.  How can I do this?  The device worked and now it isn't.  I must have changed something when I added the new router.

  You need to reinstall the driver for the webcam.

  Visit the Dell Support Web site, download and install the compatible webcam driver.

• Error when you try to open the app Itaú

  When I try to open the app Itaú (Bank of Brazil), this error occurs:

  Note: I've already opened a ticket with the support of Itaú, but this error occurs only with me. A few months ago, this app worked great.

  Newspaper report:

  Process: aplicativoitau [1921]

  Path: /Applications/Itau.app/Contents/MacOS/aplicativoitau

  ID: com.itau.aplicativoitau

  Version: 1.13.2.26 (2171.65)

  Code type: X 86 (native)

  Parent process:? [1]

  Manager: aplicativoitau [1921]

  User ID: 501

  Date/time: 2016-03-03 23:51:59.099-0300

  OS version: Mac OS X 10.11.3 (15 d 21)

  Report Version: 11

  Anonymous UUID: 7FAC3220-CD99-407D-F587-443B2918867B

  Sleep/wake UUID: D6203505-A76F-4F43-A884-DB922EE874EA

  Time since started awake: 14000 seconds

  Wake time: 11000 seconds

  Integrity of system protection: enabled

  Crashed thread: unknown

  Exception type: EXC_BREAKPOINT (SIGTRAP)

  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Note the exception: EXC_CORPSE_NOTIFY

  Unavailable backtrace

  Unknown thread crashed with X 86 Thread State (32-bit):

  EAX: 0 x 00000001 ebx: 04463760 ecx 0 x: 0 x 00000000 edx: 0x00000000

  EDI: 0x93aa5ebe esi: 0x050d7c00 ebp: 0xbffff0f8 esp: 0xbffff0f0

  SS: 0 x 00000023 efl: 0 x 00000286 eip: 0x93aa6837 cs: 0x0000001b

  DS: 0 x 00000023 are: 0 x 00000023 fs: 0 x 00000000 gs: 0x0000000f

  CR2: 0x0d0f3000

  Logical CPU: 2

  Error code: 0x00000000

  Trap number: 3

  Description of the binary images not available

  Summary of the external change:

  Calls made by other processes for this process:

  task_for_pid: 1

  thread_create: 0

  thread_set_state: 0

  Calls made by this process:

  task_for_pid: 0

  thread_create: 0

  thread_set_state: 0

  Calls made by all processes on this machine:

  task_for_pid: 6953

  thread_create: 0

  thread_set_state: 0

  Model: MacBookPro9 2, MBP91.00D3.B0C of BootROM, 2 processors, Intel Core i7, 2.9 GHz, 8 GB, MSC 2.2f44

  Graphics card: Intel Graphics HD 4000, 4000, Intel HD graphics card integrated

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (7.21.94.136.1a1)

  Bluetooth: Version 4.4.3f4 16616, 3 services, 18 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: APPLE HTS547575A9E384, 750,16 GB HDD

  Serial ATA Device: MATSHITADVD-R UJ - 8à8

  USB device: USB 2.0 Bus

  USB device: Hub

  USB device: FaceTime HD camera (built-in)

  USB device: USB 2.0 Bus

  USB device: Hub

  USB device: Hub

  USB device: Apple keyboard / Trackpad

  USB Device: IR receiver

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: USB 3.0 Bus

  Bus crush: MacBook Pro, Apple Inc., 25.1

  Additional logs:

  Last login: Mar 17 Nov 18:05:52 on console

  MacBook-Pro-of-Luiz-Miller: ~ luizfernandomiller$ /Applications/Itau.app/Contents/MacOS/aplicativoitau; "exit";

  2015 11-18 16:10:40.437 aplicativoitau [1043:62962] an untrapped exception was raised

  2015-11-18 16:10:40.437 aplicativoitau [1043:62962] NSConcreteMutableAttributedString addAttribute: value: range: nil value

  2015-11-18 16:10:40.437 (aplicativoitau [1043:62962])

  CoreFoundation 0 0x93f35c19 __raiseError + 201

  1 libobjc. A.dylib 0x9ae52f11 objc_exception_throw + 276

  2 CoreFoundation 0x93f35b2d + [print raise: format:] + 141

  3 Foundation 0x9e1d8c28-[NSConcreteMutableAttributedString addAttribute: value: range:] + 141

  4 aplicativoitau 0x0003292e aplicativoitau + 203054

  5 Foundation 0x9e1bd789-[NSObject (NSThreadPerformAdditions) performSelector:onThread:withObject:waitUntilDone:modes:] + 1071

  6 Foundation 0x9e1bd2c5-[NSObject (NSThreadPerformAdditions) performSelectorOnMainThread:withObject:waitUntilDone:] + 160

  7 aplicativoitau 0x0003729f aplicativoitau + 221855

  8 aplicativoitau 0x00006f65 aplicativoitau + 24421

  )

  2015-11-18 16:10:40.437 aplicativoitau [1043:62962] * reason for termination due to an untrapped exception "NSInvalidArgumentException" app,: ' NSConcreteMutableAttributedString addAttribute: value: range: nil value '

  First throw of the call stack to the:

  (

  CoreFoundation 0 0x93f35c19 __raiseError + 201

  1 libobjc. A.dylib 0x9ae52f11 objc_exception_throw + 276

  2 CoreFoundation 0x93f35b2d + [print raise: format:] + 141

  3 Foundation 0x9e1d8c28-[NSConcreteMutableAttributedString addAttribute: value: range:] + 141

  4 aplicativoitau 0x0003292e aplicativoitau + 203054

  5 Foundation 0x9e1bd789-[NSObject (NSThreadPerformAdditions) performSelector:onThread:withObject:waitUntilDone:modes:] + 1071

  6 Foundation 0x9e1bd2c5-[NSObject (NSThreadPerformAdditions) performSelectorOnMainThread:withObject:waitUntilDone:] + 160

  7 aplicativoitau 0x0003729f aplicativoitau + 221855

  8 aplicativoitau 0x00006f65 aplicativoitau + 24421

  )

  Trace/BPT trap: 5

  Logout

  Saving session...

  .. .copying common history...

  .. .saving story... truncate the history files...

  ... done.

  Removing expired sessions... 6 completed.

  [Processo concluido]

• Photosmart HP 6520: HP Photosmart 6520 - error message when you try to use the apps

  I can't access is more apps on my Photosmart HP 6520.  I get the error message "error connection server - 1".

  I don't know if this problem just since I recently changed from a Windows PC on a Mac.

  I very rarely use the apps, so I don't know when it started.

  Everything else seems to work very well I would say.

  Can someone please tell me what could be the cause, or if there is something I can try to sort it out?

  I seem to be going round in circles, and I can't work on what is happening.

  Thanks for your help.

  Hey @TraceyMac,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you are unable to use the pads (Print Apps) on your HP Photosmart 6520 e-all-in-one printer.  I want to help you with this.  A recent installation of printer would not affect your performance of platelets but no loss of connection or wireless Web services could be a factor.

  Note that to access the applications and their use from the front panel of your printer requires two ingredients to be successful: 1) Wi - Fi connection and 2). the ePrint feature (webservices are enabled).

  • Touch the wireless icon () on the front panel of your printer - is the printer connected to your wireless network?  (If not, run the wireless configuration wizard, select your network name/SSID and enter your password wireless reconnect).  If you are connected, proceed as explained below.
  • Tap the icon of webservices/ePrint () on the front panel of your printer.
  • If webservices are not enabled, press OK in order to enable them and allow the automatic updates of printers.
  • This will cause your printer to print an information document describing the characters before @hpeprint.com your printer (ePrint address).  This is known as the claim code.  As another way to use printing applications available for your printer, you can sign in to http://www.hpconnected.com to program applications printing to print and review all the content that ideally will reappear on the front of your printer.
  • From there, you can click the devices tab and use the claimcode to add your printer to the site and take advantage of the available applications, it.

  If these basic steps to respond to a resolution, please, try the following:

  When users encounter this type of problem in general, I suggest from scratch with wireless printer, webservices, and apps printing configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • Front panel of the printer, arrow down and select Tools
  • Select restore default

  Then touch the wireless icon, run the Wireless Setup Wizard to restore your network connection, and then tap the Webservices () and reactivate your webservices.

  If you are able to successfully reactivate your webservices, tap on the icon of your printer wireless () and make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  No none of the suggestions above restored the functionality you're looking for?  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• always says service unavailable when you try to use the apps

  Hello

  I have a HP Photosmart 5510 and whenever I try to use the said apps try not available service later. I can't connect at all more to him.

  Alright. Press the wireless button and press 'Print report' or 'Print Info', it should print a network configuration for you page.

  After that you have, we will need to access the built-in Web server (EWS) printers. You can do this by entering the IP address of printers (from the Network Setup page) browser press and the address bar type.

  Once there, press the 'Network' tab at the top of the page. From there, you'll want to click on the button "IPv4", on the f-side of the page. It will be there for wireless and wired, so make sure you click the one for you, but you are connected. If you do not see "IPv4", you should see 'Networking', press and press "Network Address (IP).

  Then, you click the small round button next to "Manual"IP address", and then fill in the IP address, subnet mask and default gateway using the information available on the network configuration page.

  For the primary or the preferred DNS server, you will want to enter 8.8.8.8.

  For secondary school or another DNS server, you will want to write 8.8.4.4.

  Click on apply and when the message appears saying that the changes have been applied, press 'OK '.

  Press the power button on your printer, wait that it completely power off and press it again to power it on.

  Let me know if that solves your problem.

• Error when you try to use the system restore: 0x8004230f

  whenever I try to open system restore, I get the error code 0 x 8004230f, I did the SCF scan to see the number of files that could not be fixed what should I do now?

  I installed Norton utilities 2011 & Norton anti virus

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Error when you try to use the webcam: host process Windows stopped working-RUNDLL32

  RUNDLL32

  Whenever I use the webcam on my computer, he brings a message as follows:

  WINDOWS HOST PROCESS (RUNDLL32) HAS STOPPED WORKING

  I can still use webcam with no problems, but I have to cancel and close this message

  What is this error, why this is and how can I solve this problem

  Whenever I use the webcam on my computer, he brings a message as follows:

  WINDOWS HOST PROCESS (RUNDLL32) HAS STOPPED WORKING

  I can still use webcam with no problems, but I have to cancel and close this message

  What is this error, why this is and how can I solve this problem

  I read this from an old thread in this forum.
  Here is the suggested solution...
  Disable the webcam.
  Start button > Control Panel > Classic view > Folder Options > view > first entry,check "always show icons never thumbnails" > OK.

  Open your Webcam again. The message is passed now?
  If so, turn off the webcam.
  Back to Folder Options > uncheck the first entry "always show icons never thumbnails".

  Open the webcam again. The message comes back?
  If not, problem solved.

  Source:
  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/46d915fb-E470-41c6-A4de-dc56d05e258f

  t-4-2

• System 5 error when you try to use the net time

  I have 2 computers running windows 7.

  I reconfigured two firewalls to allow me to ping them successfully.

  They are on a private network with no other routhers etc. There are IP 10.0.0.10 and the other 10.0.0.20

  I am using net time to synchronize the time of these machines.

  each machine I can successfully run the command to get the time to be

  which is 10.0.0.10 I can run "net time \\10.0.0.10" and get an answer.

  If I try to call another computer, I get a response of 'the system 5 - access denied error.

  We did successfully in the past, but can't make it work this time.

  I am open to any suggestion

  you will need to re sync your internet time. Go to adjust the date/time. then click on the time tab Internet > adjust > select another server in the list > then click on update now. Message at the end should say something like «the clock has been properly synchronized...» "then your good.

• SxS error when you try to use the MS Office SharePoint Workspace program

  MS which immediately alert appears when I click on the program MS Office SharPoint Workspace is: GROOVE. Failure of the EXE and States; The application has failed to start because its side to sid configuration is incorrect.

  Following error log shows: Activation context generation failed for "" C:\PROGRA~1\MICROS~1\Office14\GROOVEEX. "» DLL. Error in the file 'C:\windows\WinSxS\manifests\x86_policy.9.0.microsoft.vc90.atl_1fc8b3b9a1e18e3b_9.0.30729.4148_none_f0efb442f8a0f46c.manifest' manifests or political line 0. Invalid Xml syntax.

  How can I fix this invalid 'Syntax of Xml' file?

  Hello

  You can view this issue in SharePoint Products and Technologies TechNet Forums: http://social.technet.microsoft.com/Forums/en-us/category/sharepoint

  Thank you.

• OPM gives an error when you try to use the XSLT stylesheet

  Hello
  I'm trying to use a simple XSLT stylesheet in a project of the OPM and see the result on the screen of the web. But whenever I am clicking on the link that is created when I compile the project with the XSL file, I get the error
  «Year error occurred trying to process your request.»
  This error has been recorded and is available in the application logs.
  Support and assistance please contact [email protected]. »
  
  I kept the XSL file in the "templates" folder in the "include" folder
  I use a very simple it is a dire
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < xsl: StyleSheet
  xmlns: xsl = "http://www.w3.org/1999/XSL/Transform".
  version = "1.0" >
  < xsl: output method = "html" / >
  < / xsl: stylesheet >
  
  How can I find what the error is and what I need to do to fix this?
  
  Thanks and greetings
  Frank Michael

  I suspect it's because of the trajectory of model being badly configured in your order of document generation. Try to set it to "templates\1.xsl" and see if that fixes the problem.

• Intalled CC but get the error when you try to install the apps?

  Any ideas? be p * ssed off now. About to cancel the subscription

  Hi Davidg9319675,

  Please let us know if you still experience the problem.

  If so, then please refer to the below links:

  • If you receive a specific error code during the installation of an application, see error download or update creative Cloud applications.
  • If this does not resolve the installation problem, you can find the Setup log that generate creative Cloud applications. For more information, see troubleshoot installation problems with the log files.

• continue to download error when you try to load the apps page in creative cloud

  I get a download error whenever I click on the application in creative cloud icon so I can access any of my apps there at - there anyone who can help? I tried refreshing and reloading the page, but nothing seems to work.

  Hi Holli94,

  Can you please check the permissions on the following folders and confirm if you have the permission to read & write full or not. If this isn't the case, please give all the permissions and this should solve the problem.

  1) / Library/ApplicationSupport/Adobe

  (2) ~/Library/ApplicationSupport/Adobe

  (3) / utilities/Adobe Application Manager

  (4) / utilities/Desktop Application creative Cloud.

  See you soon,.

  Michael Sharma

• "Recovery 32 type mismatch" error when you try to use the recovery disc. my laptop is Acer.

  Acer aspire, windowsvista

  Hello JOSE CORONAwn,.

  Acer has created the process of recovery for this machine, they will also be your best resource for help with it.

  I would recommend contacting Acer support or the support forums on this.

  Best regards

  Matthew_Ha

• Error when you try to install the browser first elements 10 Inspiration

  On the Adobe Premiere elements 10 welcome screen, I get an error when you try to install the browser of Inspiration (IB).

  Sorry, an error occurred.
  This application cannot be installed because this installer has been misconfigured. Please contact the

  author of the support application.

  I have uninstalled/reinstalled the latest Adobe Air. I have connected to photoshop.com while trying to install IB as well.

  OS = Windows 7 64 bit

  Adobe products installed

  Photshop CS5

  Lightroom 3.5

  Thank you

  The team and I worked to create this document on the issue. Can you try the solutions listed and see if it solves the problem?

  Can not launch/install Inspiration browser from the home screen. First 10 items | Win 64 bit

  http://kb2.Adobe.com/CPS/926/cpsid_92680.html

  -Dave