HP Officejet 6600: HP Officejet 6600 said not "Airprint available"

Just spent 2 days, the Officejet from HP 6600 which we always use to Airprint to devices ios and mac suddenly began to show on our devices like the iphone and ipad, as well as the macbook and imac, in all these that, no. Airprint devices available.

I did a factory reset of the printer and put wifi on it, made sure all the ios and mac are online on the same wifi, everything is the same setting and all of a sudden, we found the airprint printer, even if the printer says its connected to wifi.

Any help is greatly apprecated.

Thank you for your time in advance!

David

Hi santosh,.

Please try rebooing your router by unplugging its power momentarily.

Allow two minutes to start, then restart the printer and check again.

You can see any difference?

Tags: HP Printers

Similar Questions

  • Office Jet 6600 does not print web pages, word documents fine impressions

    Hello.  My Officejet 6600 will not suddenly print web pages.  It prints very well word documents. I have restarted my computer, restarted my printer and not better.  My wireless works very well - as I said, very well printed word documents.  Help!

    Kim

    Hello Kim, alias @Sydlor , welcome in the community of HP!

    I'm here to help you with your printing issue!

    As you cannot print Web pages, I think that the web browser or Web pages could be the root cause of the problem, however, I could certainly be wrong too. I think this way because normally when there is a conflict of printer driver, you would not be able to print from anywhere at all from your PC.

    I suggest that you try using another web browser and try your impression from here to test this theory.

    If you want to let me know the operating system you are running and what web browsers that you tried, I'll help more if necessary. Please let me know!

  • OfficeJet pro 8600: not possible to change the scanning of the Panel of the printer resolution settings

    With my Officejet pro 8600, there is no possibility to change the scanning resolution settings when you are working in the control panel of the printer (not present button to touch) when I want to scan to the computer, while in the manual it is mentioned that, after pressing the Document Type, it should be possible to reach the resolution to change the resolution of the scan setting. On the other hand, when the scan to a memory card the button change the resolution settings is present.

    Sometimes for the scanning of all computers to select (winXP SP3 installed on it). The HP printing software is installed on all computers and manage digitization to the computer is turned on. It is possible to change the resolution settings when using my computer with the HP printing software, but as I said not in the use of the printer.

    Thank you to help you solve the problem!

    Hey mk75053,

    Scanning to memory card has the parameters of resolution through the front because that is the only way for the device perform this type of analysis.  However, to change the resolution settings for the Scan of the computer, one will have to perform scans through the software installed on the PC.

    I have all three types of 8600 models where I am located (base, more high quality) and of all printers simply ask to start the analysis after selecting the scan type.

    I hope this helps.

  • My HP Officejet 4500 does not print Office documents or info online.

    My HP Officejet 4500 does not print Office documents or info online. goes through the process, but, not ink. Removed and reinstalled. Same thing. Don't know how to solve this problem

    Hello

    As OEM HP is responsible for the good operation of the printer and their
    drivers provided. Check with HP support, their documentation online and
    drivers and ask in their forums.

    Try printing HP and Scan Doctor for Windows
    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

    Good luck, you need to update or reinstall the latest driver.

    HP OfficeJet 4500 Series - Drivers<- select="" your="" printer and="" then="" your="" windows="">
    http://WWW8.HP.com/us/en/support-search.HTML?tab=1#/qryterm=OfficeJet%25204500&SearchType=s-002

    HP OfficeJet 4500 - support and troubleshooting<- select="" your="">
    http://WWW8.HP.com/us/en/support-search.HTML?tab=2#/qryterm=OfficeJet%25204500&SearchType=s-001

    HP support/troubleshooting & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    =============================================

    The main issue is probably the drivers, but these can help:

    Add or remove a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    Solve printer problems (Vista)
    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Solve printer problems (Vista)
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Solve printer problems (Windows 7)
    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Open the printer (Windows 7) Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Find the manufacturer's Web site
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

    Find and install printer drivers in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • My HP officejet 6500 will not print in colour without black. I tried to run the diagnostic, turning / of

    My HP officejet 6500 will not print in colour without black.  I tried to run diagnostics, turning on/off, changing the cartridge, mop up the cart - ink, withdrawal and the cartridges, printing a test page.  All to nothing does not.

    I continued to deepen the forum and found what was a soluntion for me.  I went to the configuration selected, then went to tools, it chose and then select printhead cleaning.  The first time that he clean the printhead, I only got six rectangles colored at the bottom of the test page printed.  My screen then asked if I wanted to get another clean process and I said YES.  Low and behold, the test print page not only the FCMA out with 6 colored rectangles but also tons of alphabets in black.  Hooray! His works again.  Hope this works for you.

  • OfficeJet 6000: OfficeJet 6000 does not print

    Replace the ink cartridges for Officejet 6000 would not print.  It prints the words Page Windows printer to test a test page of color with a printer icon in the upper right, then at the center of page 4 with a white fill boxes; yellow fill, blue fill and a red fill.  That's all.  I touched a "print test page" and the paper comes out blank, although that normally shake it like the print head moves back.

    Hello @Pistol_shooter, greetings!

    Thank you access the Forums from HP Support for extra support! I see that you are having problems printing using the Officejet 6000. I will do my best to help you with this problem.

    I suggest you first check the empty ink to ensure it is enough ink. Then proceed to clean the print head using the software installed on your computer. Since your computer desktop, double-click the printer icon, the printer wizard / solution Center will open. Go to settings and navigate to the cleaning of the printheads.

    I found a wonderful document that gives you instructions step by step to solve this problem. Please visit: http://hp.care/2dtFaXe

    Please let me know if that solves the problem. Good luck!

    See you soon

    Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

  • HP OfficeJet 4652: Hp OfficeJet 4652 do not print in Windows 10

    HP OfficeJet 4652 do not print in Windows 10, made an update of the firmware, it says successful but no printing after having installed the software.
    Tried different drivers even installed on another computer same thing.

    I can print a report.

    But no testpage print (failure).

    I went back this printer and bought another a HP OfficeJet Pro 8715 now to make things clear, this printer is connected by USB and not wireless, it also would not print same symptoms, it's two thing might software takes another printer HP OfficeJet Pro X576dw which is operated wireless then I unplugged the printer and started on after reinstalling , I realized they were three updates from HP now everthing works fine Yes.

    I don't know if it was unplug the other printer or updates that work.

    All is well now.

    Thanks for your help and your quick response.

    Edward

  • OfficeJet 8620: The HP Officejet 8620 is not found

    Printing works fine.  Scanning works very well with the surface of windows 10 pro.  (anywhere in wifi)

    Scanning with results windows desktop 10 in bieng "HP Officejet 8620 is not found" displayed on the desktop screen when the diagnostic tool the launched of the printer or on the application of destop.

    Hello

    Download and run the tool on your desktop computer:

    http://ftp.HP.com/pub/softlib/software13/COL50849/MP-145514-6/HPPSdr.exe

    and post back error messages.

    Kind regards.

  • Officejet 6310 does not print in color but Mac prints a color scan

    Officejet 6310 does not print in color but Mac prints a color scan

    Awesome!

    Thank you very much.

  • HP OfficeJet 4650: HP OfficeJet 4650 does not print web pages: print from Word etc very well. Using Firefox and Windows 7

    HP OfficeJet 4650 does not print web pages: print from Word etc very well.  Using Firefox and Windows 7

    Œuvres of chrome!  Does this mean I have to give up Firefox?

    Thank you!!!

  • Control Panel more HP Officejet Pro 8600 not lit and will not work

    Control Panel more HP Officejet Pro 8600 not lit and will not work. It worked except the last 4 days. I can use certain features of the computer as a scan but can not manually use Control Panel. Nothing DOES not illuminate. The power button is on but only weakly.

    Hi kwhofms,

    Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

    http://www.HP.com/cgi-bin/hpsupport/index.pl

  • OfficeJet k850 do not print

    HP OFFICEJET K850 will not print.  The 'summary' button flashes as soon as I turn it on.  When I push the resume button, it feeds a blank page through and keeps blinking.  There is no other light flashing or on (except the light power button, which is as usual).  I tried to unplug and disconnect all the ends of the rope.  I changed all the ink cartridges and two of the print heads.  But the problem persists.

    Frustrated!

    Hi @sarahehayward,

    Welcome to the Forums of HP Support!

    I understand that you are unable to print to your printer HP Officejet K850. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem.

    I would like to try the steps in this guide, the flashing of the lights on the printer HP Officejet Pro K850 series.

    The power light and the led Flash resume
  • 10.9.2 Wireless for HP Officejet 4620 does not

    MacBook Air printing on HP Officejet 4622 ceased print wireless.   When plugged up - printgs perfect - when you use wirelss I get printer not connected.    Currently with labtop HP wireless printers, phone Samsung and IPAD to work.

    Download and install this: http://support.apple.com/kb/DL907

    Restart your Mac.

    Reset the printing system:

    -Go to System Preferences > print & Scan
    -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!
    -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

  • My Officejet 7410 will not longer accept WPA2 network access

    My Officejet 7410 will not longer accept WPA2 network access. He's always worked with WPA2, but after using the temporary printer with USB attached the printer wouldn't connect more after unplugging the USB. The only way to connect wirelessly is using WPA. What is the cause of this problem who can and how can it be resolved?

    Well, since you can't access your router to make changes, the only thing I can say now is take the device to a friends house and attempt to connect to access to the router for the tests.

  • Why my Windows Mail doesn't always said "not responding" and then when he made a screen comes up saying: 'Cancel' and it stops it?

    Why my windows mail doesn't always said "not responding" and then when he made a screen comes up saying: 'Cancel' and it stops it?

    original title: Windows mail does not

    Try to compact and repair the database (www.oehelp.com/WMUtil/).  That should fix it.

    Steve

Maybe you are looking for

  • Address of 5300 dhcp support

    Try to take an existing dish network and create virtual local networks to improve performance. I have to admit that I'm inexperienced in this, but I saw a similar montage using Cisco switching. My plan was to create a VLAN for each IDF reduce broadca

  • BSOD - Help problem

    Hello, I am running Windows 7 64 bit and met two BSOD. A random happened yesterday and now another just happened. Here is the info I got from the first: Signature of the problem:Problem event name: BlueScreenOS version: 6.1.7601.2.1.0.768.3Locale ID:

  • ISE v1.2 patch PSN 5 down, deleted endpoint identity

    Please refer to the diagram. I'll make it simple and clear. Patch version 1.2 of ISE 5 3xPOL (2xVirtual devices) 1 LUN 1 Admin Since Janauray the 8th we have problems with ISE. problem encounter were end of endpoint profiling devices like (Cisco 1140

  • D110A all-in-scanner, breaking the image into several parts

    The scanner worked fine until recently.  Copier and printer functions work well, however, the scanner started braeak images in 7 + - sections instead of one. What should do? Thank you!

  • How can I create a text box border.

    Hello I want to create the border of the text box without using XYEdge or BorderFactory. means the custom text box. Give me a simple solution answer please. Thank you Himanshu