HP officejet 6600 my laptop does not recognize the printer

Similar Questions

• My laptop does not recognize my printer as a scanner

  ORIGINAL TITLE: scanning

  Can I scan a document to my laptop via a wireless connection?

  My laptop does not recognize my printer as a scanner!

  Hello

  Most wireless with ability to scan printers also offer a scan wireless.

  The features of the printer and Scanner are designed by the manufacturer of the OEM printer so
  You must check with their support, their drivers and documentation online and ask for their
  Forums about known issues (if any). OEM for the printer manufacturer is solely responsible for the
  functioning of the printer and their drivers.

  Not really a Windows problem.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My laptop does not recognize the disc that I put in the cd/dvd rom

  My laptop does not recognize the disks I put in the disc/dvd rom disc... What wrong with it? How to operate? I'm running on windows xp. My laptop is a Dell Inspiron 6000

  Original title: my laptop does not recognize the disks I put in the disc/dvd rom disc... What wrong with it? How to operate? I'm running on windows xp.

  Hello

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  Perform the steps described in the article:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows

  Hope this information helps. Please reply back with the State so that we can help you.

• My Dell laptop does not recognize the DVD / CD player or D drive more.

  My laptop does not recognize the DVD / CD player or D drive more. It is built in and included with the computer is a Dell. Can't use it because the computer can't find it. All ideas

  Original title: DVD player

  If it just happened all of a sudden, you can restore the registry files of the system in working order by following option n ° 1 on this page.  If this does not work, you can be reasonably sure that the configuration of the system is not the problem and start looking into other possibilities as a broken drive or a bad connection inside the cable.

• Laptop does not recognize the usb mouse or the internal speakers.

  The laptop does not recognize the USB mouse. I have re installed the drivers from the site of the constructor (HP), but it still does not work.

  In addition, the internal Laptop speakers no longer work. There is no sound coming out of the laptop and it does not recognize the external headphones plugged into the headphone jack.

  I ran several troubleshooting utilities (audio playback, FixIt) and they are no help.

  Hello

  Thank you for keeping us posted.

  Sorry for the late reply.

  I imagine the inconvenience that you are experiencing. However, I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  How to use the tool File Checker system to repair missing or corrupted system files,

  Please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how to run the system (SFC.exe) to File Checker tool analyzes your system files and to repair the system missing or corrupt files in Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  If the problem persists, follow method 2

  Method 2:

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft, security scanner please follow the steps in the link provided below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.   

       

  If the problem persists, follow method 3

  Method 3:

  I suggest you try the steps from the following link and check if it works.

  No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For the problem with the USB mouse, there could be a possibility that there is a conflict of material with the mouse.

  I suggest you to try some other USB mouse with the laptop and check if it works.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

• Put HP1012 in place. The installation process does not recognize the printer.

  I've made sure the device is on and the usb cable is connected.  Printer worked fine until I needed to reinstall the windows xp operating system.  Now reinstall the printer set up the software does not recognize the printer.  Before reinstalling the operating system, the printer worked great even if it is quite old.  I use the original CD game in the installation process.

  Problem solved.  I plugged the printer into different usb port cable and the computer immediately recognized the printer.  Previously, I had ports different usb, but not the one where he worked.  I have 7 usb ports on this computer, and it seems that one does not work.

• My laptop does not recognize the DVD drive or an external USB DVD drive.

  My laptop does not reconise the integrated DVD or an external USB, DVD player.  But if I set the BIOS to let the laptop for the start of the DVD player and the DVD player worked fine.  He could read the disc.  Once, I deleted the program Nero of the system and I don't know if some Windows file has been corrupted.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ===================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please make all underneath the same if you have done some before as is often
  the set of operations that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device.
  The driver tab - click on update drivers (this will probably do nothing) - then do a RIGHT CLICK
  the reader - UNINSTALL - REBOOT this will refresh the default driver stack. Even
  If the drive appears not to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, might
  having a cable loose or slight corrosion on the contacts (usually for a laptop) and
  other questions.

  Your CD or DVD drive is missing or is not recognized by Windows or
  other programs
  http://support.Microsoft.com/kb/314060

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other
  programs - a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that
  you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the
  Setup Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check
  in both ends of the cables. Remove and replace, do not just tight. For portable computers, you can
  Often, clean power and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system
  Designer and manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case
  (Read burn CD & DVD and CD and DVD). So it is not unusual for 1 or 2 pieces
  No function while others do so properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? He
  are some registry entries that do not fix the resolution of problems and those who "might".
  be the cause.

  Check with your system manufacturer Maker and possible device for two firmware
  updates and the correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive - sub
  the key of course because there will be other subkeys in these keys. Do not forget to ask specific
  involved as well as the settings key.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a restore
  Point before you change anything whatsoever) - find the DevManView device and then right click it open in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager,
  that displays all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• the computer does not recognize the printer memory card reader. HP photosmart 7660 printer

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  Microsoft did not your hardware - done HP.

  All support for it - regardless of your operating system - is the manufacturer of the equipment.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=305364&LC=en&cc=us&DLC=en&lang=en&cc=us

• laptop does not recognize the hp printers in the configuration software

  I bout a new printer hp 4632 and installation ok on my dextop using LAN and I tried the installer for my computer wireless laptop dv7 and wouldn't continue even if it shows the printer on the network. I tried to use the usb install / recognize the printer and still no. I have disabled the firewall to see if that helps and still nothing.  I've finally went to control panel and select printer and then add a printer and the printer ago added so no, I can print because of the printer was added, but I can't use the other features with my laptop because of the problem I saw during an attempt to recognize the printer during the instalation. its really annoying and I would be very happy if someone could help me solve. the printer, I replaced with that also had the same problem does not recognize my phone and it is a hp officejet j3600 series.

  because of the frustration, that I finally decided to just format my laptop to fix. its formatting drive recovery partition and installed the software, no problem if problem not solved.

• My laptop does not recognize the HDMI cable

  I don't know if I posted this properly, but I would really like for you to tell me a little more about HP pavilion 1 TB of hard drives.

  I bought a HP Pavilion processor with ADM 1 to less than a year ago. There was whisky spilled on it a couple of months before the summer, but I managed to get back to work and it was very good and stil in good shape.

  A few weeks ago, I dropped the laptop from the desktop and it fell on a carpet. Isn't difficult, but not smoothly either. And it is always on when I got it up and working.

  When I stopped it the laptop refused to start. I did a quick diagnosis to check the hard disk and it says already something with red letters.

  I took the laptop PCs store and human a glance told me, the hard drive is dead and I need a new one fitted. "Everything is in good condition", he assumed, and I agree with him to change the hard drive.

  I told him specifically to replace the hard drive with another 1 TB, but he subsequently advised me with good confidence that I was better with a 320 and buy an external hard drive. The laptop will work very well in terms of speed. He mounted in a 320 HARD drive and gave me back my laptop with Windows 7 ultimate.

  Now, the laptop does not connect to HDMI and AMD catalyst is recognized not no matter how many times I install it. And honestly I don't know if the man really had something out of my laptop. The HARD disk he gave in return tells me his Samsung S/N: S34LJ9BG601601648

  ST2000LM003 A REV.

  PN:HN - M201RAD/M 2000 GB + 5v 0.85 A

  Please tell me that it is a HP Pavilion HDD and how can I get the laptop to recognize the HDMI connection on the flat screen TV?

  PS: I checked the amount of space to the new HARD drive that had been installed in and it said 297 GB not 320 GB. Am I missing something? Why can I not see all of the HARD disk if it is 320?

  Sorry for the long discription, I stop here.

  Nope.

  Try this:

  Click on the link below to see how to find your model number...

  Computers how can laptops HP - I find my model number, the serial number or product number?

  Scroll to option 3 to see what to look for an explanation.

  Let me know.

• OfficeJet 4500 - g510g: Installer does not recognize my printer (officejet 4500)

  I don't have the disc if I dl has the HP driver. I am at the end of the process and the installer says that it does not recognize my machine.

  Any help?

  Hello

  The software for your printer is available through Apple Software update, and there is no installer available on HP.com. thjat means that use you a bad driver or a one that is not intended for Yosemite.

  Remove incompatible software using Uninstall HP under Applications > Hewlett-Packard, then follow these steos to install the printer on your Mac:

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G510/3919445/model/3919446

  Kind regards

  Shlomi

• OfficeJet 6500 printer a wireless set up correctly, but my laptop does not see the printer.

  E710 OfficeJet 6500 a Plus

  Laptop Dell Windows 7 64 bit version

  The printer is set to work wireless.

  I have the printer set in place.  I could print my wireless test report and have determined "That I have successfully setup my printer wireless."  But when I try to configure the printer on my computer and it asks IP... I give the IP address and it did not recognize the "Can't find printer" looks like I have witnessed this process again and again today.

  I disabled my firewall by following the instructions.

  I used the tool for "troubleshooting your connection to a network printer" stage 5 "

  Then he told me to go to the HP support forum.

  Help, please.

  Thank you

  DB64

  I had charged down the bad print driver.  My printer is a more... years had loaded the wrong printer driver.

• Laptop does not recognize the DVD.

  Nothing works, maybe I should have bought a Mac.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My laptop does not recognize the cd/dvd drive, gives the error message 19 and cannot load/reload driver TSST. Any suggestions?

  Device Manager says: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19).»  Mr. Fix - it (Microsoft) indicates the CD/DVGW TSSTcorp TS-L632M ATA Device drivers & filters are corrupted or damaged.  Mr. Fix - it could not download the updates/drivers for TSST.  Mr. Fix - it has been able to get the computer to recognize, but unable to take the function of CD/DVD.

  Hello

  Perform the following methods and check if it helps.

   

  Method 1:

  Please run the difficulty of following article and check if that helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

   

  Method 2:

  You can read the following article to see what might cause this problem.

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052/en-us

  If you had recently upgraded the computer to the Vista operating system or install the Service Packs, then try the steps as described in the following article.

   

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/  

  Hope this information is useful.

• Computer does not recognize the printer driver Canon ipf 8100

  I downloaded the driver fron Canon and installed on my 64 bit Windows 7 system, but the computer does not see the driver for my printer is still not installed

  Hi Larry,

  To better understand the issue, I would like to know if you receive any error messages. If Yes, what is the error message that is accurate and complete.

  It seems that the printer is compatible with windows 7.

  http://www.microsoft.com/en-us/windows/compatibility/win7/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win7&Locale=en-us&TextSearch=canon%2BIPF8100&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Method 1:
  Run the troubleshooter and check if that helps.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:
  If the problem persists, try the procedure described in the article and check if it helps.

  Note: Try all the steps except the resolution of problems.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.