HP Officejet 6600. Phone smart Samsung SIII. I can not connect my cell phone to my printer.

I can not connect my mobile phone Samsung SIII (new) to my Officejet 6600. The printer is connected to my home network. I use it with my laptop. In addition, I have to disable my firewall to use my printer with my laptop. Any suggestions on this problem as well, please?

I use a Samsung SIII (new) cell phone. He asks the printer password. Where can I find that?

SwampDoggie wrote:

I can not connect my mobile phone Samsung SIII (new) to my Officejet 6600. The printer is connected to my home network. I use it with my laptop. In addition, I have to disable my firewall to use my printer with my laptop.

You must configure your firewall correctly.

I use a Samsung SIII (new) cell phone. He asks the printer password. Where can I find that?

What exactly is the error message?  Make sure that it does not ask your network SSID password?

Tags: HP Printers

Similar Questions

  • "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

    So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

    So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

    As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

    Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  • I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? I have also a certificate has expired and do NOT know how to get a certificate of update. ?  Please Help, I have NOT b

    I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? What this mean and how can I solve this problem? I have also a certificate has expired and do NOT know how to get a certificate of update. ?  Please Help, I have NOT been able to get help from any of these Issuea. Very frustrated. Please contact me by txt on my iPhone 352-257-9403 if possible. Thank you for your support

    iOS 9.2.1

    certificate is daily horoscope

    wwhat the devil is and why it has expired?

  • Samsung Galaxy S3 does not connect to the DELL laptop

    Hello

    I use the operating system Windows 7 Home Premium 64 - bit with the Intel processor i5-2450 M CPU @2.50 GHz. recently the past 4 months, I have observed that Samsung Galaxy S3 does not connect to the Dell laptop

    We could not see the content of Samsung Mobile in the PC. No Popup message is coming

    I tried the options below

    1. connected with different cable to the laptop, the original cable

    2. try with Samsung Kies

    Can you please help us in this regard that I wasn't sure if the drivers problem.

    We have seen the error in the mobile below.

    "Could not find the software on your computer that can recognize your device.service Pack 3, Windows Media Player, version 10 or greater, for Android File Transfer for MAC OS or Windows XP must be installed.

    You can download and install Kies on your http://www.samsung.com/kies computer to synchronize with your device data, back up the data and upgarde your device (Windows and Mac OS are supported). »

    I use Windows 7 and Media player version 12.0.7601.18150.hence was not, of course, why the Samsung Galaxy S3 does not connect to the DELL laptop

    Thank you

    Kalyan

    Hi Kalyan,

    From my research, this error message indicates that you have an old version of Samsung drivers installed on the computer.

    Several clients are faced with this question after that they have updated the version of Android to 4.3, but the version of the driver is not updated.

    I suggest you uninstall all traces of Samsung is installed in the list programs and then reinstall the device drivers Samsung from the link provided in the previous post.

    To uninstall a program see the link below.

    Uninstall or change a program

    Once you uninstall programs related to Samsung download and install the drivers for Samsung devices.

  • I have a question, I'm trying to connect my phone via bluetooth with my laptop, but I can not connect, I can not find my phone bluetooth device is a photon with sprint 4g

    I have a question, I'm trying to connect my phone via bluetooth with my laptop, but I can not connect, I can not find my phone bluetooth device is a photon 4g with sprint, if anyone can help me I appreciate it.

    Check with the manufacturer of your celllphone or Sprint to make sure your phone has this feature, and if so, what is needed to get there.  It should be in the documentation for the phone manufacturer or Sprint web site.

  • Can not connect to smart phone wvc80n

    I couldn't connect to my wvc80n by my Android phone.  I can with different laptops.  Apparently, I get the name or password, or both wrong.  I go to the web address that I normally go to.  I use the name I gave to the camera and the password.  It happens with the same sign in the whole screen again.  I'm lost what to try now.

    I have an ATRIX with ATT.  I can not reproduce my original problem.  I will go directly in the screen of video shot with all the positions.  I get an indication that he is trying to load, but I have no video...  It continues just 'work '.  I'm trying it on WiFi so that it is not a question of the signal.  I can see the video in emails sent from the motion detection mode. Now, I have waited as it finishes loading for more than 4 minutes.

    I just took a camera Mole and I can get the video to it without problem.

    With this announcement, I got to thinking the browser.  I had been using the one that came pre-installed on the ATRIX.  I just tried Opera Mobile (available for free from the Android Market) and it worked!  I got the video!  Then I tried Opera Mini and I get no video with it.

    So thank you for the time.  If someone has a problem, you can suggest they try one of the other browsers (I think there are several.

  • Samsung Blue Ray does not connect to internet, but being of other devices.

    I used this Blue Ray Samsung drive with this router for over a year without problems. A few days ago I set up parental controls, by downloading the Netgear Genie app on my PC from Windows desktop, on the router, and now Blue Ray does not connect to the internet. However it connects to the router fine. I have 2 phones Andoriod, 1 tablet of Andoriod, a WII Game Console and your Windows desktop that all connect to the router and the internet very well. I tried shut down the drive several times over 2 days and has been turned off at night twice. I deleted and re - establish the creation of a Wi - Fi connection on the player. I even updated the router. and off the Parental control. all this without any success. The DNS and IP are obtained automatically by the player. Any ideas?

    Hi bldroge,

    Here's how you reset the router.

    http://KB.NETGEAR.com/app/answers/detail/A_ID/9665/related/1

  • OfficeJet 5740: Cannot print duplex automatically and can not connect wireless

    So, I recently bought a new laptop for academic purposes. Back in September, I bought the HP Officejet 5740 because it could print wireless and can print double sided also.

    Everything worked perfectly fine when I was using Windows 8. In microsoft office, that I could see the option to print double-sided and had no difficulty, printing or the connection to the wireless printer.

    Then, I upgraded my computer to windows 10. I downloaded the hp driver and tried to add the printer several times and did not get it to connect successfully. Moreover, I see more two-sided printing option. I have the option to print one, or to manually return the documents to make it double sided.

    I downloaded the driver installed the printer and uninstalled the printer a LOT, a LOT of time with nothing doesn't. Please help me. I really only print in powerpoint and word, so it is very important to have this ability.

    For the connectivity problem, I would say the Print and Scan doctor, you can download it from HP to http://www.hp.com/go/tools.

    For the duplex issue make sure the duplex module is selected.  Click on start, devices and printers, click with the right button on the Officejet 5740, select printer, device settings, both installable and set properties automatic duplexing on installed unit, apply, OK.

  • How to connect the HP Officejet Pro 8610 to a laptop that does not connect to internet

    Just bought the HP all-in-one Officejet Pro 8610 for the local historical society. The laptop and the printer will be connected to the Internet. The printer will only be used for printing reports, scanning images, etc.

    I just removed the instruction manual to familiarize myself with the connection procedure, but I noticed there are several references that require internet access.

    Is there a workaround solution that allows me to install/connect the printer without having to access the internet?

    Thanks in advance for your help.

    Hello

    Given a special environment USB is probably the way to go. You don't need a special USB cable. Your printer has two USB ports, one on the front (#4) and the other at the back. You must use the rear USB port (#13)

    And the USB cable is similar to the following:

    http://www.pccasegear.com/index.php?Main_Page=product_info&products_id=25512&cPath=135&utm_source=GoogleBase&utm_medium=CSE&utm_campaign=export_feed&gclid=CJqz96LO-8ECFdglvQodZmkAYA#GoogleBase

    The "flat" end for your computer/laptop and 'round' (well almost round) is for the printer. Please check the box first, depending on where you are (country, region), the cable may already be inside the box.

    Kind regards.

  • HP Officejet 6700 Premium: IHP AIO Remote app does not connect to my printer.

    Tried to use HP AIO remote with my printer HP officejets 6700 Premium. I get a message that is offline. However, it is not. I tried to turn my printer market and restarted my computer. It did not work. I noticed that the

    the IP address for my printer HP officejets 6700 Premium on the app is not the same as the address of my printer. If this is the problem how can I fix it? In any case, please help. I use a Dell with Windpws 10 laptop

    Wally

    Hello @wwwally, greetings!

    Thank you for visiting the Forums from the HP Support! It's a good place to find the help you need, other users, HP experts and other support staff.

    Going through your post, application remote control HP AIO is mainly used in mobile devices and not in laptops.

    I suggest you download and use HP Scan and capture app to scan from your laptop Win 10. You can go to http://hp.care/2bUVkrw to download and install HP Scan and capture the app.

    Please let me know if that solves the problem, or if you need assistance.

    See you soon

    Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

  • Officejet 5610 all-in-one: Solution Center says not connected printer

    I can not info ink level when looking for the ink level using Toolbox printer in the solution Center.  It says 5610 printer not connected... but the functions of printer normally.

    Perfect!

    Thank you at this point, you can continue to check levels of ink on the test page, or you can remove the software and driver from your computer and try to reinstall to see the Toolbox will work again.

    If you want to go ahead with uninstall and reinstall, uninstall the printer software from the Control Panel on your PC, restart your PC then to complete uninstallation and download and run the installation from here: HP Deskjet and Officejet full feature software and drivers

    Once installation is complete, open the Solution Center on your desktop and try to check the levels of ink again.

    Good luck

  • I can not connect to smart wifi router outside of the House?

    Hey.

    I need to portforward port for logging in my smart wifi router Linksys EA6500 from the House to the outside? I can only connect when I am om LAN or wifi...

    Another question: I can only connect to the same router using an application? Is there a way to connect via a browser?

    THX.

    When you have created an account for your WiFi Smart router, have you received a confirmation e-mail? Check your email and you must confirm it so that you will be able to use it. Refer to this link ofr more information: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=12e0e8fa76f340739d0cb72037819ca9_Creating__activat...

  • Samsung tablet driver does not connect with my computer (windows 7)

    Hello I have a Windows 7 right and whenever I connect my Samsung galaxy tablet 3 USB it says device driver software was not successfully installed. I checked the updates, it didn't work, but I check the properties of the device it says error code 10

    Hello jasmine,.

    Thanks for posting your question on the Forum of the Microsoft community.
    1. If it works much earlier? If Yes, did you of significant changes to the computer before this problem?
    2. Have you tried to connect the tablet to another USB port on your computer?
    3. Are you able to connect the tablet to another computer?
    I understand that you get an error code 10 device when you plug your tablet computer. This error is due to some kind of unspecified driver or device problem. In your Windows Device Manager is not able to start the unit due to a driver-specific is not recognized. So, let's try a few steps to start in the right direction, diagnose the root cause and solve your problem.
    Method 1:
    Try to follow the steps described in the following link and check if the problem persists:

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    Method 2:

    You can also download the Software Kies from Samsung for Windows that allows you to connect your phone to your personal computer, makes it easier for you to synchronize data between the devices.

    Samsung Kies 

    Hope this information is useful. If the problem persists, please post back your results for further assistance, we will be happy to help you.

  • I can't connect my cell phone to my computer via bluetooth. The computer says its lack a Bluetooth device driver.

    I contacted HP through a program that checks the computer for missing updates, but he says his current... I contacted Samsung and the person I was chatting with that says that Samsung did not a. I really need the pictures that are in my mobile phone to my computer!

    How does this relate to the features of Windows Update?


    On 10 may 2012 (10:25 UTC), a moderator moved your Windows Update forum on the Hardware Win7 forum thread.

  • HP Officejet 5740: I can not connect my printer firmware update site

    Like one time, I put a password on my site Admin for my printer. I tried a network definition reset to remove the password, but it's still there.

    What should I do to remove the password from the server web embeded?

    Welcome to the HP Forums @ConTho!

    I'd be happy to help you to get an update of the firmware and reset the password admin for Officejet 5740.

    We will need restore your default network settings to reset the admin password. You can access the Menu on the front panel of the printer wirelessly and locate the default network option here.

    Also, here is a link that you can use to download and install the latest firmware update if your printer is not already aware: series printer e-all-in-one HP Officejet 5740 Firmware.

    If this resolve your request, please click Accept as Solution button below. If you need help, let me know and I will do everything I can to help.

Maybe you are looking for

  • How to get a stop of the screen and then transfer it to an e-mail?

    Asked me to a technician online for a screenshot of a page that was causing me problems. I forgot the steps to do this. Can you help me?

  • Digital audio output F10-122

    can I use hearphone released as an audio output and connect it to an ampl home theater to hear 5.1 DVD? I received the logitech 5500 kit, that can accept a cable coaxial, optical and analog.

  • Windows backup without having to restore

    Hello I'm trying to help back up my laptop (running Windows 7) moms for a removable hard drive to in order to free some space on his computer. I made the backup via the function "backup and restore". Even if he just said it's the backup, the last Sta

  • Why is my hard drive hold?

    Hello My hard drive has begun to stick today. It opens a little and then I put my fingers into the opening for the engine to bring all the way. It closed very well. Is there a way I can fix this so it's not completely stuck? Thanks in advance

  • Allowing an extension of the application if the firewall of windows 7 - Advanced Security

    Hello In the firewall, I block everything out. I'm trying to create a rule to allow "reliability monitor" for internet access. I know I can create a rule that allows the Explorer to access the internet, but I think that allows all windows access to t