HP OfficeJet 6700: Could not complete the scan

I used this Toshiba Satellite P55W-C laptop sucessfully for scanning and printing since I was 6 months ago and had a very easy installation. They are entirely compatible.

Printing now works fine.

I was in the Middle I digitizes a 7 page paper on the feedbed in TIF format, (which I did successfully several times before) when he leaves the analysis. I had to pull the output printer page.

I could click on new scan and go to the properties of a couple of times, but it is not yet complete the scan.

Now as soon as I click on "new scan" I get a pop up window that says "unable to complete scan.

I am able to complete the scan with my laptop HP G72 5 year (after the start of an hour of time), this scanner is fine.

What happened to my computer?

Hello and thanks for trying to help.

They were always connected wireless.

I does not solve the problem, after having paid Best Buys Geek Squad $100 to register for a program.

It remote access to my computer. He had to remove all the drivers for my printer and then reloaded them and it worked fine. I thought I had done this, but all I did was to remove the printer from the list of printers and devices. I had not actually entered in the list of programs and deleted all the driver and related information.

I hope this can help someone else.

Tags: HP Printers

Similar Questions

  • Duplex charger HP 8620 document Mac error - 'the scanner could not complete the scan.

    Hello

    When the analysis attempted double helped since the document feeder, I get the following error:

    the scanner was unable to complete the scan

    If I don't select duplex option, the printer scans very well. I really need the duplex feature was that the printer was purchased for.

    I uninstalled the printer, reset and all that gubbins.

    my setup is the following, configure the printer as wireless on mac osx mavericks last generation last drivers/HP utility. Ipgraded for the latest firmware of the printer also. all without success, and now support is not open until Monday

    For more information on this...

    So I think that I managed to fix it. Different solutions etc. then forums all about I thought I would include it here. This is the steps that I found to work for Mac OS x 10.9.

    I need to follow the steps:

    1. Remove the power cable while the printer is turned on wait about 15 seconds and plug it in again.
    2. When the installation of the printer using the selection HP not the Airprint, which is added by default on Mac OS x 10.9 - capture screen attached and operating.

      If everything is working great and then if not go to step 3.

    3. If the printer is already installed with AirPrint go to the printer main & scanners, right click in the box on the left where you printer is displayed and click on reset printing system. -This will remove all printers found here also.
    4. Download of the latest version of the software for your operating system
    5. Install the software, restart the computer.
    6. Download the latest firmware, if it is available for your printer
    7. Add your printer and follow the steps 1 & 2. It should work and allows you to copy double-sided.

    Don't know if this is a limitation of the software or drivers but ADF allows up to 300 dpi, as the manual scanner allows all the way up to 1200 dpi.

    See you soon

    Ed

  • Time Machine could not complete the backup

    Since installing a Superdrive replacement, Time Machine is not back up.  I get an error message that says: 'Time Machine could not complete the backup "Time Machine backup disk. Full backup impossible. An error occurred during the creation of the backup folder. »

    I followed the instructions in the Time Machine error - backup failed, but none of the steps solved my problem.

    I suggest that visit you Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini is the site is no longer updated. Therefore, some information may be somewhat outdated.

  • Time Machine could not complete the backup-backup drive is not found

    I get a message...

    "Time machine could not complete the backup to Time Capsule

    I can't find the backup disk. Make sure that the backup disk is connected, or select a different backup disk. »

    I have not had this problem before, it's all connected...

    If you have not already made a comprehensive network feeding cycle, it would be a good basic troubleshooting step.

    To turn off some appliances, you actually pull the plug on the appliance.

    Turn off all devices on your network, computers, routers, modem, printers, mobile devices, etc... in any order you want

    Wait a minute

    Turn on the modem and let it run for 2-3 minutes by itself

    Switch on the device connected to a modem and let run for a minute

    Keep turn on devices one at a time about a minute apart, until the entire network is back

    Try a backup

    Report on the results

  • Time machine could not complete the backup of... The backup disk image could not be found (error (null))

    Running OS 10.11.3 on my early 2011 Macbook Pro 2.7 GHz Intel Core i7 with 4 GB 1333 MHz DDR3, use Time Machine to back up to my Airport 802.11ac purchased 16/09/2014:

    Backup failed: Time Machine could not complete the backup of... Airport Time Capsule.   The backup disk image ' / Volume/Data/MacBookPro.sparsebundle ' could not be found (error (null)).   Last successful backup: yesterday at 12:17

    I can see the airport and the data file in my network.

    I immediately did a full time Machine backup on a USB key and it disconnected from my system.

    I unplugged the airport, let it rest for a minute and returned the power plug, let it settle for a green light.  I'm restarting Time Machine backup to the airport.

    I need to replace the airport?  The appliance starts to fail?  Or, it is more likely is a problem with winter static electricity that has damaged the image and reconstruction will fix all this.  Reconstruction will take about four hours with no guarantee that it will work.

    Please see #C17 in this document great support... http://pondini.org/TM/troubleshooting.html

  • HP Photosmart Premium C410b: could not save the scanned images

    I use the HP Scan application and the error message: -.

    Could not save the scanned images

    appears when you try to save in a folder as a PDF or any other format.

    Ironically, if I'm going by sending to the printer and then save to PDF it works!

    I checked and I'm using 4.2.2 with El Capitan HP driver software

    Any thoughts?

    Hello

    The application from HP for your printer is not compatible with El Capitan, so the output files incorrectly recorded.

    In the Hewlett-Packard folder move HP Scan to the trash and empty it.

    Before you install and use the HP Easy Scan application below which should save the files correctly:

    https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

    Kind regards

    Shlomi

  • Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

    Hello

    I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

    The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

    When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

    How can I get out of this loop please?

    Thank you.

    Lucie

    Hello

    For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

    This recovery process is the manufacturer, not Microsoft.

    ________________________________________________

    You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

    See you soon.

  • Windows could not complete the installation - Message in Vista 32

    Windows could not complete the installation. To install windows on this computer, run the Setup again.

    I get this message when I switch on my compaq CQ40 with Vista 32. From this screen, I can go into Manager tasks and go online, see the program files on the C: drive, change passwords, etc. Anything except support Vista. I just downloaded and installed SP2 via the Task Manager. Always stops after the Welcome screen. Another thing I never noticed before: during the boot and just after opening orb, the Welcome to Windows message lights up with the small circle of progress, then I hear a sound of gong just before startup fails. Curious. Any help out there?

    Hello

    This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

    http://support.Microsoft.com/kb/947366

    Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

    http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

    or repost in the Windows Update forum link below

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  • BitLocker: Could not complete the requested operation because of...

    Two days ago Windows 10 was running on my laptop. BitLocker has been on two disks (D and E). For some reason, I have formated Win 10 and do a new install of Windows 7 Ultimate. After installation, when I unlock the drive D, it works very well. But I can't unlock the E drive. When I enter the password, the message "Could not complete the requested operation due to a catastrophic media failure or corruption of data on the disk structure."
    I'm sure that the password is correct at 100%, but I do not have any file recovery. Can someone help me?

    Hi NooriSAN,

    Thanks for posting your query on the Microsoft Community.

    According to the description of the problem, you cannot unlock a drive locked by Bitlocker key and get error message: "Could not complete the requested operation due to a catastrophic media failure or corruption of data on the disk structure."

    This could be if defective media stored on database security, or a program in the security software error has caused corruption on disk.

    For reference I suggest you to return the items mentioned below.

    In Windows 7 BitLocker Drive Encryption: frequently asked Questions

    Overview of BitLocker Drive encryption

    What are the main issues for Bitlocker?

    Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

    Kind regards

  • Sysprep is not - Windows could not complete the installation

    Original title: Sysprep failed

    I started a sysprep on my windows7 pro computer restarts and says

    From Windows, it jumps to "Setup prepares your computer for first use.

    After 5 seconds an error occure

    / "Windows is unable to complete the installation. To install Windows on theis compuiter, re-run the installation. »

    I press Ok and it says installation continues after the reboot.

    and in this loop im stuck.

    Is it possible to do a new sysprep without getting the OS to start?

    Hello Simon,.

    Thanks for posting your question on the Microsoft community.

    We need more information about the issue so that we can help you better.

    Your computer is connected to a domain network?

    Thank you for details on the issue.

    Preparation system (Sysprep) tool prepares an installation of Windows for duplication, auditing, and customer delivery. Duplication, also called imaging, allows to capture a customized Windows image that you can reuse throughout the organization. Audit mode allows you to add additional device drivers or applications to a Windows installation. After you install additional drivers and applications, you can test the integrity of the Windows installation. Sysprep also allows to prepare an image to be delivered to a customer. When the customer boots Windows, Windows Welcome starts.

    You can check the suggestions of MarkBeacom responded on 28 June 2012 and Mark l. Ferguson responded on November 3, 2009.
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-could-not-complete-the-installation-to/bf09c3c5-298B-459F-AED5-4f431b8398f5

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Windows could not complete the installation.

    Hi, I use the windows 7 edition starter with ASUS Eee flare series.  This message appears when I do the system restore, "Windows could not complete the installation. To install windows on this computer, restart the installation.

    Hello

    Welcome to the Microsoft community.

    According to the description, it looks like you get the error, such as "Windows could not complete the installation" when you perform a system restore.

    However, we need more information about the issue to help you better.

    Please help me to answer these questions.

    Why you perform a restore of the system on the computer?

    Try this method and check:

    Method 1:

    Try to choose a different restore point and check.

    Method 2:

    Perform a startup repair

    Note: you can perform this step only if the mode of the Windows recovery environment is enabled on your computer by the manufacturer of the system (Acer). This mode allows you to use the recovery options.

    Click: Startup Repair

    Also check:

    What are the system recovery options in Windows 7?

    http://Windows.Microsoft.com/en-in/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Hope this information helps. If you have any additional questions with Windows do not hesitate to answer and we will be happy to help.

  • HDR Pro - "could not complete the command because of a program error"

    Select some photos in Lightroom CC, right click, "Edit In" > «Merge to HDR Pro in Photoshop...» ». Select 32-bit Mode, 'Tone in ACR', and... "Could not complete the command because of a program error". Every time. No indication of any other details (outside this wonderfully detailed error message). HDR work in 16 Bit Mode, but I prefer to work in 32 bits, for obvious reasons. The combination of three. Files CR2 to a Canon 50 d, which I did successfully many times, as recently as a couple of weeks.

    Attempt to use:

    Uninstall/reinstall full of PS.

    -Reset the PS preferences.

    -bodies "killall node" (a little Voodoo).

    -Hold on a leg (certainly Voodoo) monkey.

    Technical details:

    -PS: 2015.1.2

    -CAB: 9.5.0.585

    -LR: 2015.5

    -OS X El Capitan, 10.11.1

    -MBP 15 "retina, mid-2015

    Help, please?

    Recent error log:

    2016:03:28 21:55:07: follow-up of the main 0000000000001DA0 of type P5_ARef not found: 1: REQUEST failed

    2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

    2016:03:28 21:55:07: follow-up of the main 0000000000001FA0 of type P5_ARef not found: 1: REQUEST failed

    2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

    2016:03:28 21:55:07: caterpillars type 0000000000002918 P5_ADsc key not found: 1: REQUEST failed

    2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

    2016:03:28 21:55:07: caterpillars type 0000000000002910 P5_ADsc key not found: 1: REQUEST failed

    2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

    2016:03:28 21:55:07: caterpillars type 0000000000002720 P5_ADsc key not found: 1: REQUEST failed

    2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

    2016:03:28 21:55:07: caterpillars type 0000000000002718 P5_ADsc key not found: 1: REQUEST failed

    2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

    2016:03:28 21:55:07: tracking key 8 type 00000000000026D not found P5_ADsc: 1: REQUEST failed

    2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

    It is a problem with the Camera Raw plugin 9.5.  Until that a fix is released, the solution is to roll back to ACR 9.4 unless you have a camera that requires a 9.5 ACR.  Use the installer from 9.4 to roll back:

    https://helpx.Adobe.com/camera-raw/KB/camera-raw-plug-in-installer.html

  • Storage migration fails with the error: could not complete the network copy to path to the file

    Hello

    I have two hosts ESXi 5.5 with local storage and VMware vCenter device which manage them. Everything worked well until that time.

    Now when I try to make the host migration and storage, processing or power off the virtual machine, I get the error message:

    Could not complete the network for file /vmfs/volumes/.../path/to/file.vmdk copy

    The situation is the same when I try to deploy VM on ESXi-2 model that is on ESXi-1.

    All with the network configuration is correct. I have ping between the hosts on ESXi and ESXi and vCenter. No firewall hosts ESXi and vcenter. No physical firewall between hosts.

    The network latency is less than 1 ms. No packet loss.

    I read this VMware KB article: Storage migration fails with the error: could not complete network file copy and I tried solutions explained here, but the results are the same.

    You have ideas where the problem may be?

    Hello guys,.

    I finally found the problem.

    ESXi servers are configured with MTU 9000, but the switch where the hosts are connected was a bug documented with frames. I found the problem after finding this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003734

    I run the command of ESXi-1:

    vmkping - d-s 8972 192.168.10.12 where 192.168.10.12 is the ip address of ESXi-2

    The result was:

    3 packets transmitted, 0 packets received, 100% packet loss

    as a workaround, I reduce the MTU to 1500, then I patched the problematic switch.

  • I installed photoshop CC2015 on eight computers. Whenever we open the file tif 582 MB, came error "could not complete the command because thre is not enough memory. However, we have 32 g meory and with 3.6 ghz cpu

    I installed photoshop CC2015 on eight computers. Whenever we open the file tif 582 MB, came error "could not complete the command because thre is not enough memory. However, we have 32 g of meory and with 3.6 ghz cpu can someone, please give some me help on this issue?

    How much memory you allocate to Photoshop in the preferences?

    Terri

  • hure Pro XI could not complete the installation process, even if the progress window said it was downloaded 100%. In the installation process it uninstalled my previous version of Acrobat, now I can't open the PDF files.

    Acrobat Pro XI could not complete the installation process, even if the progress window said it was downloaded 100%. In the installation process it uninstalled my previous version of Acrobat, now I can't open the PDF files.

    Hi RKrensel,

    Please let me know the version of the operating system installed on your computer?

    If you are on windows system, run this tool cleaner Download Adobe Reader and Acrobat tool - Adobe Labs & restart your system.

    Make sure that there are no Adobe process running in the background using the Task Manager.

    Then try to download & install Acrobat XI using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X & serialize using your Adobe ID

    Let me remind you that your subscription for one year has already expired on 4 September

    Kind regards

    Nicos

Maybe you are looking for

  • Backups taking too much space on PC

    I have an iPhone 6 with 64 GB and I keep a back on my Windows PC in iTunes. I realized that these backups take too much space on my PC. I need to delete older backups and keep only the last. How can I remove the back ups old and where can I find them

  • Satellite Pro A210 - error recovery after a new installation of HARD drive

    Hello I have a satellite pro 210 (bios v1.6) has died the HARD drive. I bought a new WD Scorpio Blue 250 GB HARD drive and ran the reinstall drive (I've done exactly this for a friends Equium a month or so back and all worked flawlessy!) Everything w

  • Envy 17 t: HP Envy 17 t Sata III

    The new Envy 17 t which are currently sold runs at Sata III.  I don't want it will support Sata III; I don't want to if it will work at speed Sata III.  Yes or no I read a lot about this topic.  There seems to be a lot of opinions; so, my request for

  • The WMIC command to uninstall an Application or software

    Dear Sir I want to know the WMIC command line to uninstall the software or Application which is already installed in the user's system. I had tried my commands like: WMIC: root\cli > process where the name = 'vlc.exe' call uninstall for example. But

  • DV6-7002tx

    Hello, I'm posting here because I am the owner of a Pavilion dv6-7002tx and I just updated the bios to get full help from uefi to Windows 8, and I discovered that all the bios most recent f.0Une 05-2012 have hotkey wifi works do not, it will work aga