HP Officejet 6700 premium all-in-one. The documents will not power automatic document feeder fax.

Similar Questions

• HP Officejet 6700: HP Officejet 6700 Premium all in one network problems

  Printer = printer HP e-all-in-one Officejet 6700 Premium
  Model = H711n
  Number of product = CN538A
  Firmware version = MPM5CN1450AR
  Location = Ireland
  Printed pages total: 152
  Scanned pages: 58

  Other details available on request...

  I've had this printer for several months now, I have had no problem connecting to my wireless network and connect computers, telephones and other equipment to this.

  A few days earlier, when starting the printer display flashes with the useless error message, error in the printer, turn the printer off and back on.

  I have power cycled as requested and received the same message, over the power of the cycle he mentions turning off the power button and no DISCONNECT of the sector. Until then I had never disconnected from the sector. After that I have several attempts to power cycle the printer is off and removed the sector, has waited half an hour and powered on again once.

  Still stuck in a loop. He also briefly flashed a blue screen with the error B81431CB. So brief that it is almost useless. I had the boot sequence video and pause playback to read error!

  After some research, I decided that she was experiencing problems connecting to the WIFI network. So, I turned the wifi on the router and the printer network started as usual. Internal menus are now available and I can print status and so forth, so at this point I can exclude defects of ink or mechanism.

  I went in on the printer network settings and reset the network. I'll also through the printer to factory default settings. I have reactivated the WIFI network to the router then went to install the printer again. Digitized for wifi networks and found mine. Entered the password for wifi and the printer could not connect. Everything is good, correct ssid, signal. Report shows wifi password is incorrect.

  I have try several times to connect wifi password is certainly correct, but the printer refuses to recognize the correct password. I tried a different router, the same result. Says incorrect password. Also I tried WPS and a PIN, said still fails to connect.

  At this point, I have disabled all security on the wifi network. Bingo, printer connects to the network, but starts with the loop of error mentioned at the start of the tour and turn it back on. This above has been tried several times, the factory reset, everything ok, turn off the wifi security, the printer connects and goes in a loop.

  So, at this point wifi is confirmed to be defective. I decide to directly connect a LAN cable. Once the LAN cable is connected, a few seconds later the printer detects the network and goes back into its loop error. It will not just connect to a network via wifi or LAN. He previously worked on the network, and nothing has changed on the network, not new parameters or no new devices.

  I connected a laptop to the printer via USB and that seems to work ok, but a USB connection is not ideal and defeated the convenience of a wireless printer. I also tried to reflash the printer in case there is a corruption of the firmware, but the utility detects that the latest firmware is installed and that it is not engaged.

  Now...?

  OK I managed to make it work and I will try to explain the steps of my best.

  As mentioned previously, I tried another router, I tried the wiring, and I tried to reset the router and the printer. Nothing seemed to work.

  Out of curiosity I just put my phone in a WIFI AP. Tried connecting the printer and it worked. The printer connected to the WIFI phones.

  So I know that the printer works on at least one access point.

  Thus, in the settings of the router and firewall. The only thing enabled in the firewall have been

  IPv4 firewall protection

• I have a hp photosmart C6380 all-in-one and it will not print

  PRINTER

  I have a hp photosmart C6380 all-in-one and it will not be printed. Saids it is disabled in case of problems and it is not off! Tried to turn it off, then comes back on but still saids its judgment. What should do?

  Hello

  Make sure that your print spooler service is started.

  At this point, on your computer, check the status of the print spooler service. Restart the print spooler services.

  a. Click Start, type services.msc and press ENTER.
  b. scroll down to print spooler.
  c. start the print spooler service.

• OfficeJet 6700 Premium - how to set the default print quality of 'normal' of the "draft."

  Hello

  Thank you for your help.

  I have a printer/all-in-one Officejet 6700 Premium.

  Most of the documents that I print is for internal purposes, so "Draft" quality is sufficient.

  The default factory on the print quality setting is 'Normal '. I know how manually enter and restore the "draft", but I'd rather have the defaultproject, so I have to reset it manually each time.

  I could not find how to permanently fix the draft quality defect.

  Again, thank you for your help.

  George Mathis

  Thanks George,

  which is fully answering my question indeed

  Please follow the steps below to change the quality of the printer:

  1. Click the Start button.
  2. In the menu, click devices and printers.
  3. Right click on the HP Officejet 6700 icon.
  4. Click Printing Preferences.
  5. Enter the tab paper / quality .
  6. Select the project in the area of quality parameters.
  7. Click OK to save the settings.

  Now any future printing will be in draft quality.

  Kind regards

  Shlomi

• OfficeJet 5740 e-all-in-one: the printer display shows 'downloading' message despite no web service implemented

  I got a new Officejet 5740 e-all-in-one and put in place a few days ago. It is implemented in a router which is also a modem.  I've implemented any web service.  My network is password protected, and I'm the only one on this subject.

  A couple of times I arrived in front of the printer and there was a screen that says that there is a current download, and he showed the percent completed. This surprised me because I have not implemented in web services for the printer.

  I cancelled the download, both times.  The second time I accidentally typed the screen again.  I don't know what button I hit, but it has printed a message that says that my printer is now web enabled.  He also says that my printer has an email address.

  I went into the web installer, and it seemed to me that I had not implemented the web.

  1. what could it possibly download?

  2. If it does not complete a download while I'm not looking for, will there be a record of this?

  Hi @Andrew111,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you use a 5740 Officejet from HP printer e-all-in-one with a computer of Windows 7 and you noticed that the screen of the printer said there was a current download, which you surprised because you but you did not set up web services. I would like to help with that.

  You mentioned that the printer has its own e-mail address. Web services have been enabled for the printer to have an address of mail @hpeprint.com. It is possible to disable the ePrint and printable HP once the HP Web Services has been enabled.

  The download that was underway was probably a printer update, which will come by automatically. Nothing to do with the computer. I don't think there is a record of updates of the printer anywhere.

  Please let me know if that answers your question...

• HP Officejet 6700 printer all in one

  My computer - PC Toshiba laptop - will recognize not my new HP Officejet 6700 as default printer - print word documents well but others it only allows me to select the right printer to print - the combo box to select the default printer lists not my printer and in the Printers window it won't let me choose the 6700 by default even if the 6700 is registered.

  I use Windows Vista (32-bit) and the printer is wireless - which seems to work very well (fax, scanning, printing of the word).  I'll try the link you posted and see if he can diagnose the problem.  Thank you

• HP Officejet 4500 all-in - One Printer - G510g will not print * sends an e-mail to yahoo my Yahoo or att.

  Win 7. HP Officejet 4500 all-in-One Printer - G510g does not print e-mails generated by yahoo my Yahoo or att.

  * prints the header only. OK, Juno & Hotmail prints. Have tried to reinstall the software to print, etc..

  Thank you

  Com63

  I'm sorry you have a problem with the printing of Yahoo.

  See if you can print from another program, such as, (firefox, Safari, etc.).

• OfficeJet Pro 8610: Cannot scan from the document feeder

  I'm unable to scan a document using the ADF.  This has never been a problem until I recently updated my OS from Windows 7 to WIndows 10.  Nothing I found online seems to solve my particular problem.  My printer is connected to my Lenovo ThinkPad W520 computer by USB, this is what I've learned so far:

  I can print without problem.

  I can copy a document from the Board without any problems.

  I am able to copy a document using the charger, so the charger seems to be working.

  I am able to scan a document from the tray, then the scan function also seems to work.

  I checked the updates and the printer indicates that the firmware and software are up-to-date.

  What can I do to once again allow me to scan a document from the document feeder?  Your help would be much appreciated.

  Yes, under "Source", I got "Use Document Feeder so burdened" and I got the beep signaling that the document is loaded in the feeder.  So, it wasn't the problem, but I do it thanks for trying to help out.

  Fortunately, I finally found a solution, although it took a job.  I have reset the printer to its defaults, uninstalled the printer (and its drivers) from my computer, downloaded the latest HP drivers (even if the printer had stated that he was "aware" before all this effort) and reinstalled the printer from scratch.  A lot of work, but the printer works now as it did before my upgrade to Windows 10.

  While I'm not a "techie" and do not really understand why things work the way they do, I hope that my efforts may provide ideas for others who may have similar problems after upgrading to Windows 10.

• OfficeJet 7310 all-in-One: the device is not complete - Officejet 7310

  Initially, a 10 on my network windows desktop could no longer communicate with my Officejet 7310 all-in-one ethernet connection.  The Office recognizes the 7310 as a printer, but not as an all-in-one.  I tried to reinstall the software using the prescribed protocols, without success. I decided to ignore the problem.  The Office could still use the 7310 as a printer, but not as an all-in-one. In addition, my two laptops could always use the all-in-one features.

  Today, no reason apparent, the all-in-one feature has stopped working on my windows of 10 laptops.  When I tried to scan a document, I received a message that says: "device to complete installation. Attach the usb cable or reinstall the software. "I am more able to reinstall the all-in-one software.  Just like with my office, my laptop can use the all-in-one printing function, but cannot use the functions of HP Solutions Center.

  I used the protocols recommended - uninstall the 7310, running windows disk cleanup, run ccleaner registery cleaner, closing all devices on the network except the 7310 and a laptop.  Nothing works, despite several attempts on various computers.  Is no longer, I can install the software of HP Solutions Center on any of my windows 10, 64-bit, PCs - wired or wireless.  The 7310 is essentially a 'brick', because it no longer works as an all-in-one.

  What can I do to fix this? Help.

  Hey @fatz2fly,

  I don't think that you have missed something, but I recommend you uninstall a more holistic approach at this stage. I know that this appears at first sight very complicated, but I burst in instructions step by step to make it easy to follow

  1. Hold down the Windows Logo key on the keyboard and the 'R' to open the dialog box run, type % temp %
     • Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  2. Delete the printer devices and printers and the driver from the properties of the server. See the instructions below before proceeding to step 3.
  3. Download the software and choose Save as, save to desktop >AIO_CDB_Net_Full_Win_WW_130_141.exe
     • After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
     • Locate and open the folder starting with 7z (example: 7zS2356)
     • Open the Util folder
     • The CCC folder
     • If you have a computer HP run the L3uninstall.exe. If you have acomputer no HP run the L4uninstall.exe
  4. Once the uninstall is complete, reboot the computer
  5. Download and run CCleaner - How to use CCleaner.

     Installing software on the computer with a registry key, its place would be like trying to paint a wall with a hole in it, you need to patch the hole first. Repair the registry, and then install the software. Registry cleaners can be useful tools to solve certain types of problems in the registry, as those that are created when a program does not properly uninstall or a malware infection is not cleaned properly.

     This suggestion is not a document of HP, it is my own opinion. My preference is CCleaner, I use it on my computers. If you have a registry cleaner already, or that you prefer, you can use it.

• Follow these steps to reset the registry settings and options for Windows Installer.
  • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
  • In the Open box, type msiexec /Unregister, and then click OK.
  • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
  • In the Open box, type msiexec/regserver, and then click OK

* Note: there is a space between the c and the /.

If you do not at this stage, use this link to perform another way. Restart Windows install

1. Run the system Accessories\ tool disk cleanup <> How to delete files using disk cleanup
2. Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
3. Restart the computer
4. Download and run the HP printer install wizard for Windows
5. The HP printer for window installation wizard was created to help Windows 7, 8, 8.1 and 10 users download and install the most recent and most appropriate HP software solution for their HP printer.

Please let me know if that solves the problem, or if you need assistance. Thank you!

_______________________________________________________________________________________

REMOVE THE DRIVER FROM THE PRINT SERVER PROPERTIES

1. in the folder "devices and printers".

2. choose "print server properties.

• Win XP - with no printer selected, click 'File' then 'server properties '.
• Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
• Windows 7/8, 8.1 and 10 - select any printer in the "Devices and printers" folder and click on "Print server properties" above.

3. click on the "Drivers" tab at the top of the window "properties of the print server.

4. choose the printer that you want to uninstall, and then click 'remove '.

5. choose "Remove driver only.

6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

• If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

Now return to step 3 of the instructions above.

• HP Officejet 6700 Premium all -: print OK, but not scan

  I just replaced my old HP computer with a Windows 7 Professional 750-055xt HP computer and my printer scans is no longer. When I hit the scan button I get this message: "open the HP utility. Under scan settings, click Scan to the computer and make sure Enable Scan to computer is selected. "I don't know where to find the HP utility, so I am dead in the water. Any ideas where I could find it?

  HP technicians could not track down the problem by using the remote, so I took my computer and printer to the Geek Squad at best buy. The GS has found a couple of infections that prevent the printer to install the required software. Once the infections have been wiped out and the software installed, everything was fine. All in one day.

• c7250 all-in-one: the network but not settled on laptop

  So, I'm new to this.  I have photosmart c7250 all-in-one.  My laptop has windows Vista premium edition.  Whenever I'm trying to install the printer, it shows no printer found.  I can find it via the control panel when I add a printer.  My laptop computer and printer are both active on my wireless network.  I can even print to it wireless.  It will spit out a blank page before every page it prints.  The printer is not only found during installation.  I got the printer working fine before.  I had to get my laptop, now I have this problem.

  I tried once more after the last message.  It worked this time.  However, I disabled my security only long enough to install.  I can shoot HP gacé Gallop again once and I don't have a blank paper before the test page.  Thank you once again.  I had tried for months until what someone told me that these forums exist.  Thank you!

• HP Officejet 6500 Wireless all-in-One Printer - E709n does not print

  My HP Officejet 6500 Wireless only all-in-One does not print from my main computer. I can scan from this computer and print them from others. I uninstalled and reinstalled the software and drivers, restarted the queue, run the scan doctor and get error error unknown/deviece.  I have disabled the firewall unplugged abd and repluged the power to the printer.

  Any thoughts?

  I have messed with my firewall and had it work. Still not sure what I did but it resets something. Thanks for the help.

• HP Photosmart all-in - one a 309 will not print from the main computer in network

  PULLING MY HAIR OUT and have spent endless hours trying to figure this one already, so any advice will be appreciated! This 'deal' of a printer had problems in time over the 18 months or so I got it, but this one takes the cake. My HP Pavilion 6140, Windows 7, 64-bit, isn't wireless, but is connected to a router. My 309 a is wireless, but is in the same room near my computer and is recognized on the network. My husband's computer is sitting across from home in his office and can print wireless from my printer. Sitting here beside him, I can't print anything. We were able to print test pages from it to my computer, but if I go to another file of any type of printing, the printer does nothing. We have uninstalled, reinstalled, tried drivers d/l. He tells us that we need a driver, but when we go to d/l, it says no driver needed, or your drivers are up to date. My crazy husband DID with the router last weekend, on the moment cela everything has started, but since he checked it out, and everything seems fine. Copy the scanner work very well, so printing them isn't a problem either. I can save a file from my computer to the network, run in there and shoot to the top of this file and send it to my printer to print. No problem.  So, can anyone please give me any suggestions as to why my computer is unable to send anything to the printer or the printer does not recognize. Control Panel says it all works well, and the printer is ready. If I go into the properties of the computer, it says "drivers for this device are not installed, code 28. We had other messages of error as well in recent days, but nothing has been solved little matter what we do. Also MY computer doesn't list MY printer in the choice IF I try to print, and it says "printer unknown error has occurred."

  HardBeatZ, I wanted to just say a last thank you for all your help with my computer/printer problems. I hope I won't need this forum in the near future, because once again, I had to choose a different password. Yikes! In any case, we've been on all the roller coaster of emotions these past few weeks. Once you and I spread the printer as being the problem, we have debated on buying a new computer or reload Windows. After shopping and comparison of computers and prices see on them, etc., we decided that we had nothing to lose. So we borrowed an external drive and loaded important data and reinstalled Windows. Once we did that, we could still see the printer on the network, and it would still print from her husband's computer, but not mine. However, it DOES not seem to take care of other issues, and the dreaded exclamation point next to the PC icon has disappeared, so I'm gutsy and reinstalled the printer. For some reason, it still does not work wireless from my computer (which he always did), but I plugged the USB cable and returned to printing, scanning and faxing capabilities. so, I hope that all is well now, and except for paying ridiculous shipping for return monitor (still in warranty) which is released before printer problems, we did not have to shell out the $$$ for computer or printer. Monitor is shipped to me right now, so here's hoping that $$ on shipping was not in vain. Now if only we could be repaid in $$$ for the moment, concern and effort we all time put them into this mess. It WAS definitely a learning experience, even if, in the future, that I'll be a lot less worried to the excavation to solve problems. Thanks again for your time and patience.

• c7180 Photosmart all-in-one: some emails will not be printed

  some emails will not print. I unplugged the printer - still does not print. also, these emails do not fit into the page - have to landscape.

  @missouri97

  Assuming that you have installed the full function of the printer software, it is probably not the printer to blame.

  Printer:

  All-in-one printer, HP Photosmart C7180 range

  Full software features:

  File name: AIO_CDA_FSW_Full_Win_WW_140_408 - 5.exe

  The browser you use to view the emails aren't always the settings you need (for example, Page Setup to adjust the size / width Fit).

  The browser or program may be missing parameters in order to translate something that the printer can understand the content.  Strange fonts or images in the content is a possible cause of printing email problems.

  Other...

  Chrome provides little in the way of the configurations - a singularity in the browser Chrome as it shows on my system Windows 10 Pro:

  Chrome > open web page > settings > print > additional settings >

  Most of the content of the page (to print) does not appear on the preview screen.

  Click on the graphics to UNCHECK > click again to CHECK the graphics >

  and the graphics and the text finally appear as expected...

  • Try another browser to open the email
  • If not using a Navigator > check the print settings in the e-mail program, you use
  • If all else fails, download / Snipcontent, save and print the data as an image

  • Reinstall / update your PDF reader (Adobe Reader DC / Foxit)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• HP Photosmart C4700 all-in - One series Printer will not reinstall

  Hello.  I have a HP C4700 all-in - One Printer.  I don't have literal no computer knowledge.  We have installed a new router that came with a password so I had to change all the devices.  The printer is offline.  I tried to fix it as said.  No options as they said came.  Told me to uninstall it and install.  I tried.  The disc comes only with output.  I thought that I uninstalled the printer, but it is still on the list.  I emptied the trash and restarted the laptop.  I use the wireless printer.  I don't know what to do.  I don't want to continue unistalling programs and uninstall something important to the laptop.  Its a good laptop.  Fear and need assistance please.

  Hi @HPBearLax,

  In my previous post, I've linked documents that offer instructions on how to set up you wireless printer. This includes instructions on how to move from a USB connection to a wireless connection, as well as some Wi - Fi troubleshooting steps.

  Please try these steps and let me know if you are able to connect up your wireless network.