HP Officejet 6700 Premium - printhead seems to be missing

Seems to be a common problem with these printers - me too I got the error message "the print head seems to be missing, not detected or badly installed"-I tried all the suggestions of troubleshooting with no results.

I have never had any problems with HP in the past, and since 1999 have bought only products HP - when things had to be repaired under warranty, that these were always made in a very quick way - HOWEVER...

This time is a totally different story - please someone at - he found a solution yet or is that a case of replacing the printer - can someone help!

Welcome to the @debz143 forums, I hope you're well

I read your post about the error "Missing or has no print head", you receive on your Officejet 6700. If you have tried all the troubleshooting, including a power reset (see below), give us a call directly to see what your replacement of the printer or trade options are with HP.

A "Missing or doesn't have a printhead" Error Message is displayed on the printer or on the computer

Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

Have a great Tuesday!

Tags: HP Printers

Similar Questions

  • Office jet 670o Premium: HP Officejet 6700 premium - printhead missing or defective

    I'm having the same error as many others on this forum re: error message suddenly appears saying that the printhead is missing or defective. I followed all steps suggested HP, i.e., unplug the unit, check the ink cartridges, etc.. None of them has nothing to fix or cross the same question. My printer is about 2 years, so more under warranty.  There is no explanation for the cleaning of the printheads on the 6700 and other products do not translate to the 6700.  I watched about 1/4 on the blog, some at the beginning and at the end and that you won't lose my pages in all 12 looking for time to dissatisfied customers.

    And I just bought and installed new ink cartridges that are not cheap.  What a waste...

    Please let me know what I can do would be much less $ than buying a new printer, because it surely won't be a HP.   This is a problem for years and always HP chose not to solve.  they would rather you buy another HP throw.  Good luck!

    I got a call, what was missing Monday, about this incident.  The HP person said they'd call yesterday, they, or they leave a callback number, it's the only way I can answer.  Pls call me on my cell phone, or leave a number that I can reach you.  Thank you.  Dan

  • HP Officejet 6700: HP Officejet 6700 Premium all in one network problems

    Printer = printer HP e-all-in-one Officejet 6700 Premium
    Model = H711n
    Number of product = CN538A
    Firmware version = MPM5CN1450AR
    Location = Ireland
    Printed pages total: 152
    Scanned pages: 58

    Other details available on request...

    I've had this printer for several months now, I have had no problem connecting to my wireless network and connect computers, telephones and other equipment to this.

    A few days earlier, when starting the printer display flashes with the useless error message, error in the printer, turn the printer off and back on.

    I have power cycled as requested and received the same message, over the power of the cycle he mentions turning off the power button and no DISCONNECT of the sector. Until then I had never disconnected from the sector. After that I have several attempts to power cycle the printer is off and removed the sector, has waited half an hour and powered on again once.

    Still stuck in a loop. He also briefly flashed a blue screen with the error B81431CB. So brief that it is almost useless. I had the boot sequence video and pause playback to read error!

    After some research, I decided that she was experiencing problems connecting to the WIFI network. So, I turned the wifi on the router and the printer network started as usual. Internal menus are now available and I can print status and so forth, so at this point I can exclude defects of ink or mechanism.

    I went in on the printer network settings and reset the network. I'll also through the printer to factory default settings. I have reactivated the WIFI network to the router then went to install the printer again. Digitized for wifi networks and found mine. Entered the password for wifi and the printer could not connect. Everything is good, correct ssid, signal. Report shows wifi password is incorrect.

    I have try several times to connect wifi password is certainly correct, but the printer refuses to recognize the correct password. I tried a different router, the same result. Says incorrect password. Also I tried WPS and a PIN, said still fails to connect.

    At this point, I have disabled all security on the wifi network. Bingo, printer connects to the network, but starts with the loop of error mentioned at the start of the tour and turn it back on. This above has been tried several times, the factory reset, everything ok, turn off the wifi security, the printer connects and goes in a loop.

    So, at this point wifi is confirmed to be defective. I decide to directly connect a LAN cable. Once the LAN cable is connected, a few seconds later the printer detects the network and goes back into its loop error. It will not just connect to a network via wifi or LAN. He previously worked on the network, and nothing has changed on the network, not new parameters or no new devices.

    I connected a laptop to the printer via USB and that seems to work ok, but a USB connection is not ideal and defeated the convenience of a wireless printer. I also tried to reflash the printer in case there is a corruption of the firmware, but the utility detects that the latest firmware is installed and that it is not engaged.

    Now...?

    OK I managed to make it work and I will try to explain the steps of my best.

    As mentioned previously, I tried another router, I tried the wiring, and I tried to reset the router and the printer. Nothing seemed to work.

    Out of curiosity I just put my phone in a WIFI AP. Tried connecting the printer and it worked. The printer connected to the WIFI phones.

    So I know that the printer works on at least one access point.

    Thus, in the settings of the router and firewall. The only thing enabled in the firewall have been

    IPv4 firewall protection

  • OfficeJet 6700 Premium: after Windows 10 Upgrade on Officejet 6700 scanning does not work anymore - can not find scanner

    Hello

    Having finally decided to take the plunge to upgrade to Windows 10, I discovered that my Officejet 6700 Premium previously peripheral work will scan is no longer.

    My connection to the device is via a wired connection with a static IP address on the printer. It all worked perfectly under Windows 7, but now, I can only print to the printer to win 10.

    I tried to uninstall the previously working software (under Win 7) and downloaded the latest version of the HP (OJ6700_1315 - 1.exe) software, which BTW is not a patch on the previous software that I'm used to using - but it did not help. Still no joy with the scanning feature.

    I tried to uninstall all software, so I tried to launch the Wizard installation HP which seemed to re - install the last set of software (as above) with the same results - I can print it, but if I try to scan using the Officejet 6700 App it appears a dialog box saying "inaccessible Scanner. Scanner communication cannot be established. Make sure that your product is powered, check the connection and esnure that your network runs correctly. ...".  Amazing result given that the application displays all levels of printer ink, and I can print - every time!

    I tried disabling the firewall - no difference, still do not see the scanner.

    Tried using other windows applications; Paint, etc. - no joy.

    I also tried the "HP Print Scan doctor and" nothing does - even, he gives up and says to contact HP support, with no details about what to tell them!

    I hope someone else out there could have had the same problem and found a way to make it work?

    Thank you!

    Ok

    In case anyone is interested, I bit the bullet and did a new install of Windows 10 on a formatted drive. I then installed the same software that I had tried on the "upgrade to Windows 7" windows, 10, and everything works as expected.

    Therefore, there is definitely something wrong with the upgrade process, and the removal of the HP scanning software & resettlement never did his job correctly.

    I look closely at the list of DLLs etc., charged by the printing software, but could not detect anything immediate.

    Then, certainly in my case, a new facility was to solve this problem.

    See you soon,.

    Dazz

  • HP Officejet 6700 Premium: HP Officejet 6700

    My printer works ok.

    I tried to do a scan of the scanner to the computer and got some messages as to why the scan did not work.

    I have then started to make a 'x Printer Failure' message 'there is a problem with the printer or ink system. Turn the printer off, then turn it on. If the problem persists, contact HP.

    I changed the cartridge ink black and turned the printer and on a number of times, but now, still get the same message.

    Is there something I can do?

    Hi @PeterBx,

    Thank you for joining the Forums of HP Support!

    I see that you are having a "Printer failure" error message on your HP Officejet 6700 Premium e-all-in-one printer.  I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    Due to the nature of this error message, there may be a mechanical failure.

    To help you determine the cause, I have listed a few documents that can help.

    If you have completed all the above steps and your product still has a problem, service the product.

    Contact HP for service in all countries except Asia-Pacific.
    First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
    Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home
    Cost of repair out-of-warranty printers may apply.
    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: http://support.hp.com/us-en/contact-hp
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on options contact HP - click Get phone number
    File number and phone number are displayed.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • OfficeJet 6700 Premium e-all-in-one software limited scanning or it can be used via Photoshop?

    Hello...

    I use the HP Officejet 6700 Premium e-all-in-one Prod # CV078A on a Macintosh OS 10.6.8 macbook Pro (2.8 ghz Intel Core 2 Duo - 4 GB of DDR3 RAM).

    I try to run for the first time since that I recently bought this machine, and I'm running into some problems of quality. Digitization of works very well once I thought I had to use the utility software of HP scanning rather than access the scanner by Photoshop as I always had done before with my HP's Photosmart 2600 (I had for 5 years and more).

    The scanner HP scanning software (HP Scan v3.7.9 (59)) seems very limited.

    My questions are:

    • Is there a way to browse from Photoshop (or CS3, 4, 5 or 5.5) TWAIN instead of use the HP scanning software?

    • It is there no quality of analysis options other than a few easy turns, cultures and the very limited color correction, as well as certain preferences that allow adjustments to size/dpi of glass. What about scanning at larger percentages, Descreening and some more detailed agjustment image options?

    Thanks in advance.

    You are welcome

    As a general rule, the latest HP Scan 3 of the other less editing software options than previous versions of HP software.

    You can set the color settings by clicking the setting icon (). Cropping or rotating of the analysis can be done, but there is no option of resizing by the software.

    All image editing must be done with any photo editing software.

    Kind regards

    Shlomi

  • HP Officejet 6700 Premium: Unable to connect to the new network HP 6700

    I just changed networks and want to connect my HP Officejet 6700 Premium to the new network.

    In the control panel of the printer, I accessed network / Wireless Installation Wizard.  When I do, I get the message:

    Locking function

    This feature has been locked by your system administrator or the person who set up the printer.

    There is an OK button, but no other options.

    I get the same message when I tried to access a WiFi Protected Setup, and, for good measure, the default system restore.

    There is no administrator, in itself, because I'm the one who has set up the printer.  I'm rulnning a MacBook Pro on OS X El Capitan.

    Please, help me to know what I need to do to connect my printer to the network so I can print.

    Thank you very much for taking the time to answer and especially for providing additional resources should what was being offered as a solution to not work.

    I have tried your solution several times and kept getting the same message.  I tried shuttig the printer off by pulling on the power cord, stop in the right way, reverse iin, etc..  Nothing removed the error.

    Then I took the printer to a local Best Buy to show them the problem, which was at home.  We tried it a few times, and then, for no reason whatsoever (seems), it allowed us to do a reset.  No one knows what was different.

    My advice for anyone with the same problem is completely unplug it, let it sit for a while, keep trying and hope for the best.

  • Issue of SCANNER (HP Officejet 6700 Premium)

    I have a HP Officejet 6700 Premium.  I use a MacBook Pro with OS X 10.9.2 Mavericks.  The printer is connected to my wireless network.  When I scan from the printer itself and send it to my wireless computer, scans will be saved in the folder "Images".  How can I change where scanned files are sent continuously to?  I have a calle "My Scans" folder on my desktop thaty I would like that all my scans to get sent to.  I can't understand it.  I searched other discussions on this forum and none seem to answer that particluar for this particular printer for this particular operating system.  Any help would be greatly appreciated!

    Hi felipestrong,

    Thank you for visiting the Forums from the HP Support! I see that you are interested in saving the scans of your HP Officejet 6700 Premium to a specific folder you created, where default instead in the pictures folder. You are using Mac OS 10.9 and scan wirelessly from the front of your JO 6700. Please follow the steps listed below:

    1. go into your option to GO in the top left corner

    2. go to Applications

    3 select the Hewlett-Packard folder

    4. Select utility

    5. under the scan settings section, select scan to computer

    6. in the lower right corner, select Edit analysis jobs

    7. Save to the Pdf format (documents) or Jpeg (pictures) - whichever you prefer

    8 scroll to others to locate the scan my folder created

    9. press Select , and then tap OK

    Now when you scan from the front panel of your 6700 JO, your scans are saved in the folder you chose.

    I hope this helps!

    Thank you once again,

  • Ghosts on pages double-sided printing second on Officejet 6700 Premium e-all-in-one

    Please can someone help?

    Printer name model e-all-in-one Officejet 6700 Premium

    Firmware MPM3CN1232AR

    Software 028.000.1315.000

    Driver 09.84.00.1173

    Win 7 SP1 64 bit

    Wired ethernet connection

    Problem

    On two-sided printing, the second side of printing on all pages is ghost. This is in particular the noticebale on verticals.

    This is true for all the qualities of printing on any documents .pdf or. doc.

    I use all the HP printing paper and original cartridges.

    I aligned the print head and checks suggested on the help pages.

    I contacted HP support, which were brilliant and replaced the printer and the duplex unit.

    They suggested that it was because I was using Office 2003 SP3 and Windows 7 but I find this problem on too but not in Wordpad v6.1 .pdf files

    The problem does not occur when scanned or copied documents are printed

    Is there a solution out there on this new printer please?

    Hi 007OHMSS,

    I carefully read through a VionAiry pointer to the post of ItalSanif with links to more articles.

    There were two main suggestions as to how to proceed. I didn't uninstall the "bloatware" and back to base for the HP Officejet 6700 Premium drivers, but I installed the drivers from the series HP Deskjet 6980 in accordance with the procedure at this link http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-7510-Duplex-Problem-y-axis-scaling/td-p/1754773 and listed below, with a few mods to include activation of unit duplex in one set of instructions.

    And you know what? This MARKET! Ghosting on the second side of all pages printed double-sided disappears to be replaced with a nice crisp clear impression. At present, all the other functions, including scanning seem not affected and function as usual, although of course the new driver (HP Deskjet 6980 series) makes the leaves of different properties.

    In my environment, I have also 3 XP machines in network connected wireless to the printer via the router and the PC Win7x64 connected by ethernet to the same router. Meant this download and the installation of the driver HP driver the HP Deskjet 6980 series for the XP PC Web page not the Win 7 x 64 because they were not present.

    I modified a bit routine and reproduce it below to help others. A/c for the original post, that was provided by the HP Technical Support. Why nobody's support services seems to know about or drivers have not been fixed I would never know.

    First turn off you will want the printer already available on the computer before you continue.

    For Win7 PC (XP is similar but not identical)

    1. Go to Start -online device and printers => then click on the "Add a printer" button in the upper left corner of the device window.
    2. Click on the button "Add a local printer" (choose this option if you do not your configuration)
    3. Check the box "use an existing port.
    4. On the drop-down list, select the option for example CN115130TP05JW , but use the correct name for the PRINTER port which is the serial number of your printer (do not use the fax entry)
    5. Now in manufacture of list on the left, select "HP".
    6. On the list of Printers to the right, select "HP Deskjet 6980 series (HP)" "
    7. "Once the pilot moved to enter in the" 'devices and printers ' window and right-click the newly added "HP Deskjet 6980 series" and select ""printer properties ' on the drop-down list. "
    8. Go to the "Advanced" tab, and then in the drop-down list next to the label of "Driver" select "HP Deskjet 6980 series.
    9. Click on the button 'Apply' - the configuration window should change it's shapea bit.

      10. in the HP Deskjet 6980 window properties, click on the tab "device settings" on the top of the window.

      11. in the list of parameters, search for "Unit duplex (for printing on 2 sides) ' and select it.

      12. once highlighted, select in the drop-down list ""Installed "; "

      13. When finished press apply

      14 now, go to what you use to print documents and select "HP Deskjet 6980" as your printer. Activate duplex printing and you should see the pages to print correctly.

    15. you can also change the name of the printer in the "Général" tab I changed it in mine to "HP Officejet 6700 with HP Deskjet 6980 pilot set shadowd duplex printing".

    I had a little problem in that, for some reason any in the document (e.g. Word / etc\ .pdf) box under the effects tab my radio button has mysteriously been on 20% until I changed it it was hard to see that there was no ghosting dialogue printer properties.

    So after complete 1 reconstruction of the printer of the original with the parts sent to HP services support for November 2012, an escalation at magnifications greater within HP (no answer) and a new printer of A...n, VisionAiry has pointed me to a solution that I had tried with DJ 450 drivers, nothing works, after a Shane_R post dated last year.

    So thanks to you and also to 007OHMSS who worked on this problem and original posters

    All I can say is that it worked for me and I am so grateful to everyone on this forum to ensure that I am sure of my eyes and mental health, looking more printed duplex printed with a shadow/ghosts and to be what they were not prepared.

    Congratulations so all round and thanks again

  • OfficeJet 6700 Premium only print blank pages

    My Officejet 6700 Premium printer is only printing blank pages. I just replaced all the cartridges with HP new ones. The printer is now going through the motions but does not print blank pages. This happens for all what I am trying to print including Diagnostics pages. The printer is a little older a year is not under warranty. Any help would be greatly appreciated!

    I can understand how frustrating. Your printer has built in the printhead. To improve the quality, the only step that I recommend is the cleaning of the print head. Please try to contact HP technical support to see what options you have. Click here to read: worldwide Contact HP.

    Good luck.

  • HP Officejet 6700 Premium: HP Officejet 6700 Premium No. no power no answer, unless that stood on the end

    So I have a HP Officejet 6700 Premium which was working fine and suddenly stopped working. The power module is fine, green light turns on, well verified. I tried all the inane suggestions on the HP support site so I know the plug works, feeds the power supply module, but the printer power button is unresponsive. Opening the door or lid elicits no response. Totally D.O.A.; That is until I can't stand the printer on the end (discovered this while preparing to throw it across the room). If I am standing at the printer at its end it sometimes suddenly turns on and starts his routine of self-control (too long).

    Everyone knows this issue or know a solution? The printer is out of warranty and when I called HP support they told me to throw it away and buy another. Clearly, it seems that something is just loose in the field of food, because when it is vertical, it seems fine. I don't mind to pay to have it fixed, but the support rep seemed indifferent in the repair of the printer option.

    Hi @Alpha_Beta,

    Welcome to the Forums of HP Support! I see that you are facing some hardware issues on your HP Officejet 6700 Premium. It does not, until he is on his side. You have contacted the technical support and the printer is out of warranty.

    Try to perform a hard reset:

    1. disconnect all cables and cards of memory in the printer. Unplug the power cord, directly from the back of the printer when the printer is still on.

    2. unplug the other end of the power cord.

    3. If there is a power supply on the power cord, disconnect one end and reconnect it.

    4. at the end of 60 seconds, plug it directly into a wall outlet (not a surge protector or battery backup because they can cause the printer to lose over time basic functionality).

    5. connect the power cord to the back of the printer.

    6. the printer should automatically power back upward. If not, turn it on with the power button.

    7. try to make a photocopy (if your printer is a printer all in one) before you connect the cables from the printer.

    8. connect the other cables needed to the printer.

    It work? If you are still unable to use the printer as it is more under warranty I would contact them and look at all your options as it is not a repairable part. As you say electric sounds, something inside.

    I hope this helps.

    Thank you for being a part of the community of HP. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  • OfficeJet 6700 Premium: officejet 6700 wifi on despite the Panel saying otherwise

    My 6700 Officejet is set up do not use wifi, but to use a wired network. On the control panel of the printer, the wifi logo is off, and in the settings menu, it says that wifi is disabled.

    Despite this, the printer is trying to install a wifi network. It broadcasts a network name. (I checked: the network name is the printer model, it disappears when I turned the printer off, and it reappears when I turn on the power.)

    What should I do to really turn on wifi?

    Hi @pieterl,

    Welcome to the Forums of HP Support!

    I see that your printer HP Officejet 6700 Premium broadcast a wireless signal, but you want to disable this feature. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I understand that the wireless is off, but the printer still broadcasts a wireless signal. I gather that you see is 6700 portable printer HP Officejet HP Setup menu wireless on the computer or other wireless devices? This seems to indicate that the Direct wireless is enabled.

    The menu on the front panel of the printer, go to:

    • Setup menu > network > wireless Direct > turn wireless Direct off the coast.

    This should fix the problem for you.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • OfficeJet 6700 Premium printer: Re setting My HP 6700 x Premium

    Emergency assistance is needed please! I managed somehow to me locked out many many functions on my printer that I tried to install on my new HP laptop since Tuesday, January 19, as well as the problem of getting my port number! as I have nowhere to put a disc in my new laptop! even if everything seems to work at the minute, I'm very worried if my printer need Urgent updates my printer stops working! I'd appreciate any help I could be offered please! informaitiom even on a full re my printer together please! some things that are locked on my printer are the date and the time in my country there are about 15 to 20 functions I managed to block me out!

    Thanks for any help you can give too

    Hello

    Thank you for using the forum.

    Please download and install the full software features from this link to win 10 for your printer:

    http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930S6

    You can try to reset your default printer.

    On the front of the printer control panel select Setup > tools > Restore Factory defaults to reset the printer to its default settings.

    We recommend that you uninstall the previous software before you reinstall the downloaded software FULL of features,

    Hope that helps.

  • HP Officejet 6700 premium has applications in a stone printing

    I have problems printing with HP Officejet 6700 Premium.  My impression always asks on the ground by having "quequed" and I can't seem to remove the item from "quequed" if I try to print my requests.  I tried to shut down my computer and restart it, but my print request is still in status 'stone '.  When I tried to "cancel all documents print", it did not because the article is still in status 'stone' and has not been deleted.  I tried to get out all my caps that were connected to my computer and my printer and restart the computer, and concluded that the question I wanted to be removed from the print job was still in status 'stone' so I couldn't print the next job.  This is not the first time it happened, but I'm frustrated and don't know how to fix the status of 'stone' so I can use the printer to print my requests.

    Hello

    From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the tasks within this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

    Restart the computer and you should find that the documents have been deleted.

    Kind regards

    DP - K

  • OfficeJet 6700 Premium error 0 x 00000709 cannot set the default printer

    I bought my new HP Officejet 6700 Premium on February 1, 2013. I use a HP Pavilion dm4 laptop under Windows 7 Home Premium. The installation seems to give no problem. However I'm unable to set the default printer and have the error message 0 x 00000709. Excel, Adobe, Outlook does not allow me to print.

    I spoke to the HP printer Department February 1st and they sent me some software of diagnosis which I sent back. I called again on 6 February and was told my problem was always open and they were trying to reproduce the problem (it appears on the net without a patch work). It is now February 10, and I hope the good people of HP to recall with a solution soon. You try to run a small business with no printer is not ideal.

    Someone at - it else ecountered this problem, and you have a solution.

    I ran HP utility, installed uninstalled the driver etc etc etc.

    I seem to have fixed the problem by changing in the registry keys. If HP wants a donation to charity, I would be happy to provide it to them :-)

Maybe you are looking for

  • Skype detects microphone does not detect but no sound through it

    Hello I have my headset connected to my card his and my card its connected to my PC via the USB cable. I tested with two cables different and three different ports. When I connect my headphone directly on the PC, everything works. When I connect it t

  • CPU hit 100% + screen flickering/flashing

    Hi people, I wanted to help with a problem, that I started having recently! My CPU seems to be hitting 100% on 5secs or until this particular file with .mp4 files charges completely upwards (when I access .mp4 files), but when I convert them, the scr

  • 22-3020: updating the BIOS with the utility HP - big mistake

    I have a model all-in-one 22-3020 who Support Assistant who kept harassing me to do a BIOS update.  I followed the instructions, he made a back-up and then the utility went down.  When you are finished, I continued to use the computer without a probl

  • Can I get a custom in a hp system power?

    I have a minitour dc7700 convertible and I want to install the graphics card in it but the PSU is only 320W and card graphics system condition is 450W... so my question is can I get a new power supply and install the in and replace the PSU manufactur

  • Gen license does not

    Hello I tested my keygen server manually and through the Test of the App World submission process box, and it works in both cases. However, I get emails from people with license key incorrect. What is happening to someone else? Thank you. BTW, I use