HP Officejet 6700 Premium: Windows 10 can't find scanner

Similar Questions

• oficejet 6700 premium: HP Officejet 6700 Premium WIN 7 - double-sided print - back comes out backwards

  HP Officejet 6700 Premium - os Win 7 - double sided printing - back comes out backwards. I TRIED TO DOUBLE-SIDE PRINTING, BOOKLET PRINTING, AND PRINTING GREETING CARDS. ALL OUT UPSIDE DOWN AND ALSO very small PRINT ON ONE SIDE OF THE PAPER HALF. HOW TO SET THE PRINTER SETTINGS BY DEFAULT OR CHANGE WHAT IS PAST?   Oh it then, I'm not yelling, just noticed the hats were on.

  Jay B.

  Hi @Jayburn,

  Welcome to the HP Forums!

  I noticed that the back comes out on top down, when duplex printing with your HP Officejet 6700 Premium, Windows 7. I am pleased to see that for you!

  Please, take a look through this guide, print on both sides of the paper (duplex printing) for HP Officejet Premium 6700 e-all-in-one printer (H711). Follow the instructions for Windows.

  Guidelines General double-sided printing

  Do not print on both sides of the following types of paper, or paper jams may occur:

  • Transparencies
  • Envelopes
  • Photo paper
  • Glossy paper
  • Paper lighter than 60 g/m2 (16 lb).
  • Heavier than 105 g/m2 (28 lb) paper.

  Several kinds of paper require a specific orientation when you print on both sides of a sheet. It's letterhead, preprinted paper and paper with watermarks and pre-perfores holes. The printer will print the first side of the first book. Load the paper with the top edge first and the side to be printed facing downwards.

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• OfficeJet 6700 Premium: after Windows 10 Upgrade on Officejet 6700 scanning does not work anymore - can not find scanner

  Hello

  Having finally decided to take the plunge to upgrade to Windows 10, I discovered that my Officejet 6700 Premium previously peripheral work will scan is no longer.

  My connection to the device is via a wired connection with a static IP address on the printer. It all worked perfectly under Windows 7, but now, I can only print to the printer to win 10.

  I tried to uninstall the previously working software (under Win 7) and downloaded the latest version of the HP (OJ6700_1315 - 1.exe) software, which BTW is not a patch on the previous software that I'm used to using - but it did not help. Still no joy with the scanning feature.

  I tried to uninstall all software, so I tried to launch the Wizard installation HP which seemed to re - install the last set of software (as above) with the same results - I can print it, but if I try to scan using the Officejet 6700 App it appears a dialog box saying "inaccessible Scanner. Scanner communication cannot be established. Make sure that your product is powered, check the connection and esnure that your network runs correctly. ...".  Amazing result given that the application displays all levels of printer ink, and I can print - every time!

  I tried disabling the firewall - no difference, still do not see the scanner.

  Tried using other windows applications; Paint, etc. - no joy.

  I also tried the "HP Print Scan doctor and" nothing does - even, he gives up and says to contact HP support, with no details about what to tell them!

  I hope someone else out there could have had the same problem and found a way to make it work?

  Thank you!

  Ok

  In case anyone is interested, I bit the bullet and did a new install of Windows 10 on a formatted drive. I then installed the same software that I had tried on the "upgrade to Windows 7" windows, 10, and everything works as expected.

  Therefore, there is definitely something wrong with the upgrade process, and the removal of the HP scanning software & resettlement never did his job correctly.

  I look closely at the list of DLLs etc., charged by the printing software, but could not detect anything immediate.

  Then, certainly in my case, a new facility was to solve this problem.

  See you soon,.

  Dazz

• Windows 7 vs HP Officejet 6700 Premium

  My HP Officejet 6700 Premium at work was scanning PDF and conversion to editable WORD format, as my work converted to Windows 7, the feature is no longer available.  (I have the original cd for printer). This can be corrected?

  Welcome to the DNico forums,

  I understand that you are looking to analyze text editable with Windows 7. I will do my best to help!

  You will need to install the full features software: HP Officejet Full Feature Software and Driver

  Click this link for instructions on scanning in the form of editable text (OCR) click on How to scan with HP software, how to scan as editable text: how Scan: Windows 7

  Here's a screen shot I took as an example:

  

  Happy Thursday

• OfficeJet 6700 Premium e-all-in-one software limited scanning or it can be used via Photoshop?

  Hello...

  I use the HP Officejet 6700 Premium e-all-in-one Prod # CV078A on a Macintosh OS 10.6.8 macbook Pro (2.8 ghz Intel Core 2 Duo - 4 GB of DDR3 RAM).

  I try to run for the first time since that I recently bought this machine, and I'm running into some problems of quality. Digitization of works very well once I thought I had to use the utility software of HP scanning rather than access the scanner by Photoshop as I always had done before with my HP's Photosmart 2600 (I had for 5 years and more).

  The scanner HP scanning software (HP Scan v3.7.9 (59)) seems very limited.

  My questions are:

  • Is there a way to browse from Photoshop (or CS3, 4, 5 or 5.5) TWAIN instead of use the HP scanning software?

  • It is there no quality of analysis options other than a few easy turns, cultures and the very limited color correction, as well as certain preferences that allow adjustments to size/dpi of glass. What about scanning at larger percentages, Descreening and some more detailed agjustment image options?

  Thanks in advance.

  You are welcome

  As a general rule, the latest HP Scan 3 of the other less editing software options than previous versions of HP software.

  You can set the color settings by clicking the setting icon (). Cropping or rotating of the analysis can be done, but there is no option of resizing by the software.

  All image editing must be done with any photo editing software.

  Kind regards

  Shlomi

• HP Officejet 6700 Premium: Don't scan and the scan dialog box will not open

  Since I upgraded my computer to Windows 10, I'm unable to use my scan on my HP Officejet 6700 Premium function.  I can't even open the scan dialog box to look at the options etc.  I tried to find 'Scanner and printer' in painting, but it does not recognize.  Any suggestions?  I already deleted the printer and re-installed.  It was working fine before on Windows 8.

  Hello
  
  Thank you for using the HP forum.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930S6

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Hope that helps.

• Installation software for HP Officejet 6700 Premium problems

  I have a Compaq laptop originally with Windows Vista Home
  High-end operating system. I have recently installed Windows 8.1 and
  had some minor problems with the programs, but they have been sorted
  outside.
  I tried to reinstall the HP Officejet 6700 Premium software,
  Download the software OJ6700_1315.exe of your drivers and
  Software Web site.

  When I run the software I get the following error
  Message:

  Setup error

  Call to DriverPackageInstall returned error 5 package ' C:
  \Program Files\HP\HP Officejet 6700\DriverStore\Pipeline
  \hpvpl09.inf': a caller of DriverPackageInstall must be a
  Member of the Administrators group to install a driver package.

  As I'm logged in as an administrator, I tried right click
  on the software downloaded OJ6700_1315.exe and execution of the
  software as an administrator. I still got the same error
  Message. I thought it would be because of network problems and
  joined the network (the other computer running Winows 7).
  But always without success. I tried to remove the HP folder of
  Program Files and then run the program as an administrator
  but still got the same error message.

  Any advice on how to get accepted as a member of the
  Group directors would be appreciated, or in another way
  to deal with this problem

  Good FrazerA,

  I'm happy that we did the SFC/scannow. The question is are known is the operating system, not the HP software. At this point, my suggestion is to perform a system recovery to Windows Vista. A system recovery will bring the computer to a new similar State, for this purpose, you will need to back up all your personal data and files.

  If you want to continue, click on the following link and follow the instructions. > Undertook a restoration of HP (Windows 8) system

  After system recovery is complete, use the HP Support Assistant to ensure that the computer is up to date. Support Assistant will check for all updates to Windows and HP. If not already have the Support Assistant installed, click here to download and install it. > HP Support Assistant.

  The best course of action at this time would be to install the HP on Vista software to see if it installs now. Of course, a successful installation confirms the theory that the operating system itself is the root cause of the problem at this point.

  Post back with the results and product number. With the Compaq product number I can check the specifications, make sure that the BIOS updated and you ensure that we have a smoother installation of Windows 8.

• OfficeJet 6700 Premium: HP Officejet 6700 Premium - print borderless

  Since I've upgraded to Windows 10 print dialogue screen no longer offer the option to print without margins.

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Hope that helps.

• Total number of pages printed on printer e-all-in-one-hp officejet 6700 premium do not match

  Printer model: hp officejet 6700 premium e-all-in-one

  OS: windows xp, service pack 3

  Method of connection: network

  Description of the problem: number of page do not match

  If I double click on the "hp officejet 6700" icon on my desktop.

  Then click on "view the ink level.

  Then click on the reports of the device"" tab.

  Then click on "check printing.

  The report provides: Total number of printed Pages 8159

  If I double click on the "hp officejet 6700" icon on my desktop.

  Then click on "view the ink level.

  Then click on the "devices" tab

  Then click on "printer ews home page."

  Then click on the 'Tools' tab, I see:

  Total number of pages

  6725

  Difference = 8159-6725 = 1434

  Can someone tell me why these numbers are different? They represent different totals?

  MelanieHello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have questions about your number of pages.  I would like to help.

  The built-in web server does not account for pages printed not across the network.  The number of printer pages all the elements. 1434 pages were not printed through the network, therefore, not counted in the SAP.

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!

• Ghosts on pages double-sided printing second on Officejet 6700 Premium e-all-in-one

  Please can someone help?

  Printer name model e-all-in-one Officejet 6700 Premium

  Firmware MPM3CN1232AR

  Software 028.000.1315.000

  Driver 09.84.00.1173

  Win 7 SP1 64 bit

  Wired ethernet connection

  Problem

  On two-sided printing, the second side of printing on all pages is ghost. This is in particular the noticebale on verticals.

  This is true for all the qualities of printing on any documents .pdf or. doc.

  I use all the HP printing paper and original cartridges.

  I aligned the print head and checks suggested on the help pages.

  I contacted HP support, which were brilliant and replaced the printer and the duplex unit.

  They suggested that it was because I was using Office 2003 SP3 and Windows 7 but I find this problem on too but not in Wordpad v6.1 .pdf files

  The problem does not occur when scanned or copied documents are printed

  Is there a solution out there on this new printer please?

  Hi 007OHMSS,

  I carefully read through a VionAiry pointer to the post of ItalSanif with links to more articles.

  There were two main suggestions as to how to proceed. I didn't uninstall the "bloatware" and back to base for the HP Officejet 6700 Premium drivers, but I installed the drivers from the series HP Deskjet 6980 in accordance with the procedure at this link http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-7510-Duplex-Problem-y-axis-scaling/td-p/1754773 and listed below, with a few mods to include activation of unit duplex in one set of instructions.

  And you know what? This MARKET! Ghosting on the second side of all pages printed double-sided disappears to be replaced with a nice crisp clear impression. At present, all the other functions, including scanning seem not affected and function as usual, although of course the new driver (HP Deskjet 6980 series) makes the leaves of different properties.

  In my environment, I have also 3 XP machines in network connected wireless to the printer via the router and the PC Win7x64 connected by ethernet to the same router. Meant this download and the installation of the driver HP driver the HP Deskjet 6980 series for the XP PC Web page not the Win 7 x 64 because they were not present.

  I modified a bit routine and reproduce it below to help others. A/c for the original post, that was provided by the HP Technical Support. Why nobody's support services seems to know about or drivers have not been fixed I would never know.

  First turn off you will want the printer already available on the computer before you continue.

  For Win7 PC (XP is similar but not identical)

  1. Go to Start -online device and printers => then click on the "Add a printer" button in the upper left corner of the device window.
  2. Click on the button "Add a local printer" (choose this option if you do not your configuration)
  3. Check the box "use an existing port.
  4. On the drop-down list, select the option for example CN115130TP05JW , but use the correct name for the PRINTER port which is the serial number of your printer (do not use the fax entry)
  5. Now in manufacture of list on the left, select "HP".
  6. On the list of Printers to the right, select "HP Deskjet 6980 series (HP)" "
  7. "Once the pilot moved to enter in the" 'devices and printers ' window and right-click the newly added "HP Deskjet 6980 series" and select ""printer properties ' on the drop-down list. "
  8. Go to the "Advanced" tab, and then in the drop-down list next to the label of "Driver" select "HP Deskjet 6980 series.

  9. Click on the button 'Apply' - the configuration window should change it's shapea bit.

     10. in the HP Deskjet 6980 window properties, click on the tab "device settings" on the top of the window.

     11. in the list of parameters, search for "Unit duplex (for printing on 2 sides) ' and select it.

     12. once highlighted, select in the drop-down list ""Installed "; "

     13. When finished press apply

     14 now, go to what you use to print documents and select "HP Deskjet 6980" as your printer. Activate duplex printing and you should see the pages to print correctly.

  15. you can also change the name of the printer in the "Général" tab I changed it in mine to "HP Officejet 6700 with HP Deskjet 6980 pilot set shadowd duplex printing".

  I had a little problem in that, for some reason any in the document (e.g. Word / etc\ .pdf) box under the effects tab my radio button has mysteriously been on 20% until I changed it it was hard to see that there was no ghosting dialogue printer properties.

  So after complete 1 reconstruction of the printer of the original with the parts sent to HP services support for November 2012, an escalation at magnifications greater within HP (no answer) and a new printer of A...n, VisionAiry has pointed me to a solution that I had tried with DJ 450 drivers, nothing works, after a Shane_R post dated last year.

  So thanks to you and also to 007OHMSS who worked on this problem and original posters

  All I can say is that it worked for me and I am so grateful to everyone on this forum to ensure that I am sure of my eyes and mental health, looking more printed duplex printed with a shadow/ghosts and to be what they were not prepared.

  Congratulations so all round and thanks again

• printer has no illumination and cannot print manually - HP Officejet 6700 Premium

  I have a HP Officejet 6700 Premium - I can print from my computer, but can't print manually.  The button does not illuminate.  I can't scan, print manually.  Suggestions how to operate manually the this printer?

  Hi Beachwoodgirl,

  Welcome to the HP Support forums.   I understand that you are unable to make a copy of the front of your printer Officejet 6700.

  Please follow the steps for a Solution in the Scanner failure paper paper.  You don't specifically mention you found the error but it is what it sounds like.  You can also use HP Print and Scan Doctor for Windows.

• Installation disk lost for HP Officejet 6700 premium

  Lost my hp Officejet 6700 premium installation disc. I need to install it on my computer work windows 7... What should I do?

  Hello:

  You can download the full feature software and driver for your printer from the link below...

  http://support.HP.com/us-en/product/HP-OfficeJet-6700-premium-e-all-in-one-printer-series---H711/4322971/model/4323605/drivers

• New Officejet 6700 Premium is not recognized by PDF to print

  It took me over 2 hours to find out that in order to print my Officejet 6700 premium email using Windows 7 Edition nine Home Premium that I had to create an email address to send my mails to the printer to print, because MS Outlook does not recognize the printer.  To make matters worse my PDF files do not recognize the printer at all and so I can't print them.

  What is the solution for this HUGE error?

  I was able to find a solution to set the default printer on the computer that can solve the other problem that you are experiencing as well. Please take a look at this post from BHK6 : Re: cannot set default printer 03/03/2014 11:18. Links to a third party web site, the steps are also listed on the Microsoft Web site: can't set the default printer, error message: 0 X 00000709.

  I hope this helps.

  Kind regards

• All-in-one Officejet 6700 Premium does not work when a cartridge is empty

  On my officejet 6700 Premium, I have had trouble since the magenta cartridge was missing.  I'm unable to print even if you select using black only, it appears on the screen that gives me the choice to order or cancel, it gives also this pop up if I try to scan documents to save to my computer and even trying to fax.

  I am currently using Windows 7 Ultimate service pack 1

  I am at a loss on it and a plan to buy a cartridge, but in the meantime all that I need is to use black and also to scan documents.  Is there a way around this issue?

  I'm sorry that you are experiencing this issue.

  You will not be able to print WITHOUT this magenta cartridge. Some printers (older models) can print certain colors without another cartridge in the printer. The reason why it is not printing because this magenta blends in with all the other cartridges to perform a true black.

  So if it was another cartridge, it would give you the same error message and do not print.

• HP Officejet 6700 premium has applications in a stone printing

  I have problems printing with HP Officejet 6700 Premium.  My impression always asks on the ground by having "quequed" and I can't seem to remove the item from "quequed" if I try to print my requests.  I tried to shut down my computer and restart it, but my print request is still in status 'stone '.  When I tried to "cancel all documents print", it did not because the article is still in status 'stone' and has not been deleted.  I tried to get out all my caps that were connected to my computer and my printer and restart the computer, and concluded that the question I wanted to be removed from the print job was still in status 'stone' so I couldn't print the next job.  This is not the first time it happened, but I'm frustrated and don't know how to fix the status of 'stone' so I can use the printer to print my requests.

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the tasks within this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K