HP officejet 6800 e all on one: how to enable direct wireless printing

Hello world
How to enable direct wireless printing because my printer saying me that its disabled and I need to contact s Adminitrator or the person who installed the printer, which is me I did it by myself.
So what is the solution pleaaaase?

Hello and welcome to the HP support community!

Press the "wireless Direct" icon on the control panel for your printer.

Should look like this:

If you press and hold down for 3 seconds, it should print the password to your devices (if the security has been selected).

WyreNut

Tags: HP Printers

Similar Questions

  • Printer e-all-in-one-HP officejet 6800: e-all-in-one-hp officejet 6800 series

    setting up the new series of 6800 e - all - in - one hp officejet. paper tray is full but message says: "load paper tray and press OK. I have done this several times with the same message.

    After slap the closed paper tray it finally works, not the more technical solution.

  • HP Officejet 4630 e-all-in-one: how to send a fax 2 sides with HP Officejet 4630 e-all-in-one series?

    There is no documentation on how to send a fax with HP Officejet 4630 e-all-in-one-sided.

    I have 20 pages with a print on both sides. How do fax you these pages so that they receive the same pages with print on both pages? I load the documents with top paper feeder. The scanner allows you to load pages ask two face contrast to send the fax?

    Thank you, Kevin

    You're welcome cybercook.

    If you need keep the same order, put a single page at a time, recharge it with the other side facing upward and click Start a new search.

    You can also place all the stocks and click Scan Page, once recharge on the other side and click again on the analysis Page.

    Once the page was scanned send the fax.

    Shlomi

  • HP Officejet 5746 e-all-in-one: HOW to connect android phone randomly to print the data of the phone?

    I have Macbook & Office XP connected to the printer (HP Officejet 5746 e-all-in-one printer) necessary to connect Random cell phones to print the data.  All directions?  TIA Doc

    You need a wireless setup to print from Android phones.

    Please see this link for mobile printing options available:

    http://www.HP.com/go/mobileprinting/

    WyreNut

  • HP Officejet Pro 8500 all-in-One Incompatible with D-Link Wireless N 300 Router?

    We have upgraded to a new D-Link Wireless N 300 Router and have consulted successfully the router using the key to safety with two cell phones and a desktop based ethernet but am getting an error "password WPA not valid" when you use the Wireless Setup Wizzard of the HP Officejet Pro 8500 Wireless all-in-One.  We have administrator access rights to the D-Link router using the desktop computer but not sure what to change.  We have restored factory on the 8500 and am not sure what next step to take to try to get it connected.

    New technology of security of this router is not compatible with the all-in-one series 8500 or y at - it fixation or modification which could be considered to get this connected with the new router?

    This problem has been resolved.  We 'Restored default network' in the network menu of the 8500, however, we needed "Restore Factory Defaults" in the Tools menu that solved the problem and allowed us to use the wireless configuration Wizzard correctly.

  • All-in-one: how to analyze when the printer is broken?

    Hello.

    I have a HP 4480 all-in-one, and the printer stopped working earlier. I think it's really broken, the print heads seem to be stuck. Well, I don't really mind, I have an older printer that does work, but the scanner no longer works, asking the printer to work first?

    Someone at - he managed to make the scanner work wihout having the printer working?

    Thanks for any idea!

    Hello

    If the print heads are broken, the printer will not be able scan, print or fax.

  • All-in-one HP Photosmart Plus B209a wireless - printer problems

    I plug just this printer 2 weeks ago and there are already problems! A few days ago, I went to print something a TI never printed, so I checkd the queue and it says the printer is offline. I checked and the 'use printer offline' option has NOT been verified. I googled looking for help offline wireless printer and came across some tips to restart the spool.and then unplug and plug back into the printer, so I did and he went online and I was able to print 1 document of 4 pages. But after this document, I tried to print another document, and it said "error-printing" in the queue. So today, after that I restarted my computer, it worked well again - for a document. Then he returned to offline mode. So I watched fo more help online. I tried making sure the correct port with my printers IP address has been verified and he was, and I tried to uninstall and reintalling the drivers that did not help. I basically tried everyting on the HP support on the topic page and nothings worked. But it peprfectly worked well for a week so I don't see why it would be to have these problems now?

    Also, I tried to print a document 2 faces a few days (before the issuance of all offline). I went to the printing preferences, click on 'manual' under duplex print, then ok, and it printed all the odd pages, as it was supposed to. Then the screen came from promting me to take the paper in the output tray and the tray and click on continue so I did. I waited and waited and waited for a good 10 minutes and never even printed pages. In the queue it sad it was printing, but it wasn't. I cancelled the document and just tried to print a document face a regular to see if this works-it printed fine. So I tried printing 2 - against new and it's the same as before.

    The laptop I am I am trying to print from is a Sony Vaio CR320 running on Windows Vista. I have not instaled anything new in the last week, so I know there are no new program interfering. Also, I have not removed any programs.

    Any ideas? I am a student and I am a little lost without a printer lol :/

    OK, time to bring in power tools.  Download, install and run this tool.  He should tell us what is happening.  Run it when the printer shows offline.

  • OfficeJet 4630 e-all-in-one: 4630 won't find wireless network - still need help

    Using the Netgear provided by Frontier DSL gateway. Printer worked fine until we lost internet for a week and Frontier had me reset the bridge and put in new password (WPA). Tried to connect several times (printer saw the correct network SSID) until I noticed that I had 1 bad characters on 16. Then the printer stopped seeing the network altogether, even let me get entry in the WPA. Tried to reset the default settings, no help. This thing is now just a HP boat anchor?

    BTW, all other devices in the House are connected wirelessly fine, after you have used the correct password that is.

    In page 8 User Guide

    Restore the default settings network settings.

    1. press the button to access the State wireless wireless
    menu.

    2. press the button next to wireless settings
    Setting menu.

    3. select restore default settings.

    4 confirm the selection to restore the default values.

  • DeskJet 3520 e-all-in-one: How do I install the printer deskjet 3520e ink cartridge

    I have a hp laptop touchscreen and I do not remember how to replace the ink cartridges. Please help! l

    Here, the video shows how to install a printer Deskjet 3520e ink cartridge.

  • I have an Officejet Pro L7580 all-in-one. How do you find the printer did how many copies?

    I have an Officejet Pro L7580 all-in-one.  How do I know how many copies the machine made?

    Dragon-fur (unusual name!)

    Thanks again for your suggestions, which led me to the answer.

    Looking more closely at the options in the HP Solution Center, which I thought I had already exhausted, I followed these links - settings, print settings, the Toolbox for printer, information, reviews, myprintmileage, source, which led me to the total number of pages, number of total jobs and many other information, which, apparently, is monitored by HP.

    Thanks for the clues get me there.

    Kind regards

    Tony

  • Re: How to do a reset on an Officejet 6600 e-all-in-one C155A

    I can't use the screen touch because it allways says, missing or doesn't have a printhead with the installation catriages in, and it will not identify new catriages.

    Hello @bk85,

    Welcome to the Forums of HP Support!

    I understand that you get the message "Missing or has no print head" on the front panel of your HP Officejet 6600 e-all-in-one printer. I want to offer my help now to resolve this error message. Now, you specify in your message that you get this error message while using the configuration of your printer cartridges. If your printer has never been used before you need to use cartridges Setup to initialize the print head system in your printer. However, if you have used the HP Officejet 6600 in the past with cartridges installation, you can use new cartridges without problem in your machine. In saying this, the print head message you get refers to the part that the cartridges will fit. The printhead "reads" the cartridges and put the ink on the page. If the print head is defective in your printer, new cartridges will not solve this problem. On the contrary, a replacement of the entire unit may be needed as the print head is a non-replaceable element in your printer.

    Can I have it please click here to access the troubleshooting step designed to resolve this error message. If the error persists after completing a replacement printer reset would be necessary. If you need a replacement, I highly recommend contact our telephone Support queue to explore the additional hardware options.

    HP Technical Support can be reached at the: 800-474-6836.

    If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    Worldwide contact HP

    Please let me know if the reset solves the printhead error you receive. Good luck!

  • HP Officejet Pro L7680 All - in - One will not print black

    Original title: HP Officejet Pro L7680 All - in - One

    I started my printer and it won't print in black.  Don't copy in black no more.  Test page does not work and the color works very well.  I changed all the cartridges, so it isn't the ink... No idea what is the problem?  He served 6 months off and disconnected.

    Hello

    This forum is for comments on the Forums for answers and you should ask at your
    questions in the Windows Forums for answers corresponding to your version of Windows.

    Answers - Windows Forums
    http://answers.Microsoft.com/en-us/Windows

    It also helps us to help you if all the useful information.

    How to ask a question
    http://support.Microsoft.com/kb/555375

    ==============================================

    In this case you should check with HP Support, their documentation online and drivers,
    and ask questions about known issues in the forums of HP.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    I hope this helps.

  • Printer e-all-in-one-HP Officejet 5740: HP Officejet 5740 e - all - in - one for Windows XP

    HP Officejet 5740 e-all-in-one & Windows XP are compatible?  I heard some differences voice to this topic, but nothing for sure.
    Ty for the answers.

    Hi, how you doing?

    Sure... below the full program for the installation of Windows XP:

    http://ftp.HP.com/pub/softlib/software12/COL55955/MP-134701-2/OJ5740_117.exe

    I hope that helps!

    I would give a great kindness...

    If the question is clarified, mark my answer as "solved" and click the icon of the 'hand' to provide 'Congratulations' in gratitude.

    Good day!

  • My Officejet 6500 E709 all in one will not print black.

    My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

    Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

    Hope this helps you with your problem.

  • HP Officejet 4630 e-all-in-one: incorrect printer in Goggle Cloud printer

    I entered the wrong email address for my printer Hp Officejet 4630 e-all-in-one printer Google Cloud Print & now the premium printer Hp Officejet 6700 is showing that & option. I fixed the email address to hpconnected.com with the appropriate claim code (4598edne25uvy), I changed the email to [personal information deleted]
    , so I could remember it more easy, but the printer option still shows Hp Officejet 6700 premium in the Gmail app. How can I fix it?

    Hello @db53,

    Welcome to the forums of HP.

    I understand that you have the wrong printer on your Google Cloud Print account.

    I would like to help.

    If you goto Google.com/cloudprint, then select printers in the left column, you can choose to delete the printer.

    That it will take off your Google Cloud Print account.

    You may also select the option "Add printer ready cloud" again.

    This time, when you add the printer, use the address custom connected HP ePrint.

    I'm not sure about the Gmail app, which may have to be processed by the Publisher app.

    With luck it will be fixed when you remove the 6700 account.

Maybe you are looking for

  • Performance, upgrades or not

    Use for movies of multi-tasking and a video montage. Is 8 MB of memory and video intel enough or must either be upgraded.

  • PC communication - PC using GPIB

    Hello I have problems to realize the communication between two PCs using the GPIB interface. Each PC has GPIB controllers. The controllers are detected correctly by MAX. My question is how I can achieve data transfer in both directions using LabView?

  • How I get the crystal eye webcam

    I thought that the icon was still on my computer, but can't find it, need help... .thank you

  • creating Windows dvd burning only the aspect 4:3, even when set to 16:9 ratio.

    Burns maker Windows dvd only the aspect ratio 4:3, even when the value 16:9.was ok in vista, but not the case in windows 7 too movie maker in windows 7 is garbage.this pure direct essential bundle is rubbish.why should set us up with that? I bet that

  • running an application on the Simulator

    got this message when you try to run my application. "" launch firstappproject the device debugging"has encountered a problem. There is no such thing as the specified program in the launch configuration file. How can I fix this so I can run my applic