HP Officejet 7110 wide printer - problem with MARGINS

Similar Questions

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?

• Printing problems with XP and Lexmark-documents are just stuck in the print queue

  Original title: printing problems with XP and Lexmark

  Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

  I guess you do not have all of the error messages.

  It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

  Find the IP address of the printer of his network diagnostic page.
  Click Start > printers and faxes, right-click the printer and select Properties
  Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
  Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

  To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

  Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

• OfficeJet Pro 8600: message "problem with the printer or ink system.

  I replaced the magenta cartridge with a new cartridge genuine HP (end of warranty 2017/01), but now get a message "problem with the printer or the ink system.

  If I restore the old cartridge I get the message that it is empty, but all the other options of the printer are available.

  Online support does not give me any result of solution but suspect there may be a manufacturing error in the new cartridge.

  Does anyone else have this problem or advice?

  Hello
  
  Please click HEREto access the procedure which should solve the problem.

• iPhone5 with Officejet 655 wireless printing problem has

  IPhone 5 won't print wirelessly on Officehet 6500 a. done before, but since the update will not be

  Hello

  Sorry to hear that you are experiencing printing problems.

  You use the functions AirPrint and ePrint? The phone is able to see the printer?

  Things to check would be that the printer and the telephone are always connected to the same wifi network and that there has been no wifi password.

• OfficeJet Pro 8620: Print borderless with Officejet Pro 8620

  Hello

  I recently bought a hp OfficeJet Pro 8620 and I'm testing now a few important functions for my business. One of them is printing without margins of leaflets in A4 format. But the problem is: even if I chose "A4 borderless" paper size and "photo paper" like paper it always prints a white border around entire page--so he is not chosen in the menu borderless printing. The flyers that I want to print all pdf format and print them with a program called "document viewer", but using another program for printing without margins such as gimp makes no difference!

  By the way: I'm (Lubuntu 16.04) Linux as an operating system, the printer is connected via usb and the driver that I use is "HP Officejet Pro 8620, hpcups 3.16.3.

  Please help me to find a solution to this huge problem, because printing flyers for my small business is one of the most important reasons I bought this printer for and I urgently need print flyers (without borders) for the weekend too.

  Thanks in advance!

  Hello everyone,

  It's me again. Yesterday, I solved the "problem".  The problem is that the image of the pdf file that I wanted to print without borders had the size 210 x 297 mm (A4), but I had to larger scale to 214.5 x 300 mm, 9 mm up to what he had the correct size for printing without margins (A4).

  Unfortunately, these strange dimensions does not exactly appear in the dialog box size media in settings print HP Tools program but rather to the dialogue of the PDF Viewer, if you select the paper type and paper size. I do not understand this, but I finally works, and that's all I wanted. In any case thanks for trying to help me!

• HP Officejet Pro 8630: HP Officejet Pro 8630 printing problem

  Hello

  I have a printer HP OfficeJet Pro 8630 with two different computers connected on it. I have no problem printing from the computer that I use every day, but when I try to print from the other office, nothing happens. The second recognizes the printer and says it is connected, but it does not recognize the printer. In the meantime, I can turn around and print something on the computer to work immediately after I try to print on the other. If anyone has any suggestions, I would be very happy! Thank you.

  Hi @AdminGuy,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you have a HP Officejet Pro 8630 e-all-in-one printer is connected to two computers via a wireless network, the main one has no problem printing, but the printer is not responding to print jobs sent from the second PC. I would like to help with that.

  Is the PC that does not work with the printer to Apple or Windows computer, and what operating system is running?

  If it's a Windows PC, try to download and run the HP print and Scan Doctor. This tool can diagnose and solve many problems of printing software and printer.

  Please get back to me if you want.

  If it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

• HP Officejet Pro 6830: My 6830 Pro Officejet a error Messege "problem with printhead. Through troubleshooting all.

  My HP Officejet Pro 6830 worked normally and then all of a sudden it started giving the error messege "problem with printhead.  It does no more than print all.  It doesn't let me do any troubleshooting procedures.  I use a wireless network on windows 10 64-bit operating system.  My printer is covered by the warranty.  What can I do to fix this?

  You will need to contact HP for the service, they will probably send you a replacement printer.

  From a post of Sunshyn2005, contact technical support HP see the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
   
  File number and phone number are displayed.

• OfficeJet pro 8620: officejet pro 8620, error: problem with ink system

  During the initialization of the printer, after that I inserted the ink cartridges, I get the error: "X-problem with ink system... I followed the directions: "lift the latch on the print carriage, reinstall the print head and then remove the cartridges and inspect leaks." Do not use cartridges that leaks. If the cartridges are OK, re - install. After you have reinstalled, turn the printer off and then back on. »

  Well it don't turn off the printer... I get another message: "the printer initialization and the ongoing calibration.» Do not put off the printer or turn off the power during this process. »

  I repeated this process on 6 or 7 times with the same result.

  I use "cartridges Setup" he claims.

  Help, please!

  Thanks in advance...!

  Johnny

  Hi @JohnnyLee,

  Welcome to the HP Forums!

  I understand that you found the error, the problem with ink on your HP Officejet pro 8620 system. I'm sorry to hear that, but happy to help!

  I recommend going through this guide, printers HP - "Problem with print head", "Printer failure", "Ink system failure", or "0 x." r "C2."... "Displays Message error.

  If the guide does not help, please call our hotline at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

• Officejet Pro 8620 printing problem

  I am trying to print a document of 26 pages, double sided on my new printer officejet pro 8620. It prints a page aside 26-20 double ok and part prints then stops of 19 page. My windows o/s 8.1. Anyone has a solution. Thank you

  Hi Roger41,

  Welcome to the HP Forums!

  I see that you try to print a document duplex of the 26 page with your HP Officejet pro 8620, and he stops on page 19. I'm happy to help you with this printing problem!

  To get help, I'll need to know:

  1. If the printer is connected, USB, Ethernet, or wireless.
  2. If the power cable is connected to a surge protector, or directly to a wall outlet. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  In the meantime, please try the HP print and Scan Doctorand let me know what happens!

  I hope to hear from you and have a nice day!

• Officejet Pro 8600 printing problem

  I bought my Officejet Pro 8600 on 4 June 2014. I use windows 7-32 bit, everything worked fine until June 25, when I got an error message when you try to print saying "unable to communiucate with printer. I ran out and the printer worked again. On June 27 the same message, but his time of 8 hours of troubleshooting has not solved the problem. During a clean reinstall everything if fine, green all ticks, then all at once the connection is lost, managed to print a document during this time, but then print to square 1. Sometimes the software automatically detects the Lan connection and sometimes I have to put the IP address but two methods fail after a short time. I closed my firewall, but that made no difference. Talked to my son who is a computer expert and it is strange to have the same problem with its HP printers, which it has failed to resolve yet. I am 72 years old and have reached the point of despair that nothing seems to work and I've only had the printer for 3 weeks, that I would really appreciate if you have a solution. cordially 2dx

  2DX

  You run any type of anti-virus program?

  Create a new TCP/IP port with the static IP address assigned to the printer.
  Do not use the Port of discovery of HP created by the installation of the printer driver.

• Officejet 6500 wireless printing problem

  Hello. Last week I got an Officejet 6500 Wireless, used. (toll-free from a friend)

  Last week, I installed a new black ink cartridge. Yesterday I printed something for the first time and it worked very well. Today, I sent a print order for five pages to a single page text document (no color on the document). The machine three copies fine, then the last two are out stained as if the ink was running out.

  I went out the black cartridge and it shook a little, used a can of air to eat the area where the cartridge fits inside the printer and I tried again, but now I get only blank pages! Does anyone have an idea of what could be the problem?

  I'm sorry you have a problem with the printing of blank pages. It could be a couple of different reason.

  The print head may need to clean or replace. Sometimes the cartridge needs to be cleaned.

  Print a self-test page and see if you get white pages.

  Here is a link that can help you with the sense of emptiness.

  http://support.HP.com/us-en/document/c01892627

  Here is another link that will provide assistance with the print quality. I would like to know if it is useful.

  http://support.HP.com/us-en/document/c01641184

• 6700 all in a single premium printe: problem with printehead on tires all hp offers with no success.its only less than 3 years.

  his 3yrs.old even had a gun for 10 years with no problem.when I was able to contact hp, they said I have to pay it's bs.they just that buy you a new printer.

  Hi @highseas99,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with the print head. I'll be happy to help you.

  By your message, you have tried all the troubleshooting. The print head is integrated to this printer and is a part which cannot be replaced. Buying a new printer is the only option, but HP offers printer ' trade-in Trade-up '.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Envelope printing problems with M401dn

  When you print the envelopes with a M401dn Pro LaserJet, the return address is not properly merged, and there seems to be some random jobs printed in the buffer zone; the main address is printed correctly and properly merged.  I noticed the problem with greeting card envelope, and I've never had problems with before on three printers LaserJet previous (LaserJet II, LaserJet 5 p and LaserJet 2100).  With a few #10 envelopes, the return address is properly merged, but I always get the tasks in the buffer zone.

  I get the same problem if I fold a piece of paper in half and then pass it in the envelope feeder.  If the envelope feeder is empty and the paper feeds from the main Board, the return address is properly merged but I always get the tasks in the buffer zone.

  There no problems when you print just the documents.

  I seem to get the same results using the PCL 6 or the PCL 6 UPD driver.

  Any ideas?

  Hmmm... I could have sworn that I updated the paper type "Envelope", but obviously, I did not; with that restored, the problem seems to be fixed. Apparently, the fuser is powerful picky about the thickness of the paper.

  Anyway, if someone experiencing similar problems, the paper setting could well be the cause.

• Photosmart HP: Printing problems with my HP Photosmart

  I had problems with my photosmart for awhile. For a while, when I would plug into the usb port of my computer, I had received the error "the disk you inserted is not readable by this computer. I used to ignore the error and used to print anyway.

  Yesterday, someone pushes my printer without unplugging the usb by behind. Now, when I try to print something, I see in the queue of the printer, the error message saying "communication error: the computer is therefore more able to communicate with your printer." "Turn off the printer, check your printer connections and look for errors in the printer and turn on the printer. I got it done and straightened my computer as well, but it does not work. After that, I opened the printer utility via my computer to print a test page, and it worked really, which is strange.

  Thanks for your help,

  Sarah

  Hi @stoukan,

  I see that you are getting the error "communication error: the computer is therefore more able to communicate with your printer." Turn off the printer, check your printer connections and search for printing errors and turn the printer. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  What is the name and the product number of your printer? How can I find my model number or product number?

  Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet. Make sure that the USB cable is connected directly to the computer. (not a station or a hub) Try a different USB port on the computer. Check that the USB cable is connected to the appropriate port on the back of the printer.

  Check if the Mac sees the printer is connected.

  Go to the Apple, select about this Mac, system report, select USB.
  Do you see the printer listed?

  Fix permissions of the drive on the Mac:
  Close all applications.
  In the Apple menu, click OK, click Applications, and then click utilities.
  Double-click disk utility.
  Highlight your hard drive / partition on the left.
  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.
  Click on Printers & Scanners.
  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.
  Click OK to confirm the reset.
  Type the name and the correct password.
  Click OK to reset the printing system.
  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  If you're still having problems, please try another USB cable.

  If there is anything else I can help you, let me know. Thank you.