HP Officejet 7310xi all in one: the HP Officejet 7310xi all-in-One Printer-t - y at - it a hard drive?

Similar Questions

• My space free icloud is full, so I want to download all my files on my Mac and use a hard drive instead of icloud. I'm not happy to pay to store my files in icloud. How can I do this?

  My space free icloud is full, so I want to download all my files on my Mac and use a hard drive instead of icloud. I'm not happy to pay to store my files in icloud. How can I do this?

  Welcome to the Apple community.

  Locate in iCloud drive in your Finder, drag to where you want to save them on your Mac, confirm, you want to move them when the Finder prompts.

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.

• What would happen if the computer goes into hibernation mode, but there is no free space on hard drive?

  What would happen if the computer goes into hibernation mode, but there is no free space on hard drive?

  No doubt a failure to the hibernation or a nasty system crash - not sure and not willing to risk a stable system there.  :-)

• I want to copy all my jpg files to another directory (a portable hard drive) with some of the same names of JPGs, but not necessarily all. What will happen? The word 'COPY', will be some of the deleted files be added or nothing at all.

  I have a LOT of pictures in my computer (over a thousand) and I want to put them on a portable hard drive, I bought (1 terabyte) but I won't write any of the names of existing files with different images. IS THIS POSSIBLE? Do I need software or special hardware? I tried the copy/paste standard as well as move files to the new directory, but it seems that I can lose files. I'm not sure if the files that are missing (or lack, in my opinion) are not copied. When I finished emptying the directory, it shows that it is empty but the new directory does not seem to have any additional files that should be there based on the counting of the files before and after.

  Thanks for any help you can provide, Bill

  1: right-click and then drag the pix on the external drive. Release the right mouse button and choose copy here. They are there?  Now remove it from the computer.

  2: you can see pix of the same name overwrite each other, or be done with (1), (2), etc.. But even in this case, they will be interspersed with the former. If keep you them in separate folders with different names, that should not happen. Personally, I rename all the pix before storing them. You can select the set instead of the code of the camera and a group, rename the first holiday 2009 yo and the rest will be renamed holiday 2009 and each havf will one (1), (2), (3), after them.

  It is also a nice freeware tool which, among other things, can rename a group of photos easily.

  FastStone Image Viewer
  http://www.FastStone.org/

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Get the "Access denied" error when you try to play all video files in another folder on my external hard drive.

  A couple of days, I've had accidentally one of the folders slipped on my hard drive in the folder above him and was presented with the "Access denied" error messages when I tried the two a) reglisser it out & b) open it from the record she had been driven to (which was not a folder of my making that is a jibberish titled folder containing two .vdm files it contains first)

  After receiving advice of a friend, I did a restore from safe mode on the eve of the day when he moved and he did bring him back with all the files and files in the right place, but now I'm getting an access denied for each file, I try to play. Whether Real Player, Windows Media Player etc none will play.

  Just to test, I slipped a .avi file in the folder to see if he was going to play and he did it can be the folder settings, I'm just hoping that all these files are now not corrupted and unplayable as I have some 180 GB of data in this folder in more than 1000 files.

  Any help is very appreciated.
  Kind regards
  Haley

  Hey HRolston,

  What version/service pack of XP are you using?

  What format of your hard drive is formatted to?

  You can check the version/service pack:

  ·         Click Start

  ·         Right click my computer

  ·         Click on Properties

  ·         On the general tab, under System: you will see your information

  For example: Microsoft Windows XP Professional, Version 2002, Service Pack 3

  You can check what is the format of your hard drive is:

  ·         Click Start

  ·         Click on my computer

  ·         Right click on Local disk (c) (or letter that contains your operating system)

  ·         Click on Properties

  ·         On the general tab, next to file system: you will see the format of your hard drive (Fat32 or NTFS)

  Can't wait to hear back on your part.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can't get rid of Babylon on Firefox, I did all the steps I found on the internet, for example by deleting them as "add on" deleting files on hard drive, I found google as home page, but when the search always rises with Babylon.

  Babylon is not displayed as a plugin and all files are removed on the hard drive but need a place to "reappear". I'll have to use the browser in the meantime. I would go back to firefox. Thank you.

  See:

  • https://support.Mozilla.org/en-us/questions/901118

• Maxtor One Touch Plus 4 500 GB external hard drive no longer works.

  Okay, so, I got this hd for about a year now. Never had any problems with it, and I also have a 1 TB WD external hd. The WD it still works perfectly. However, the Maxtor suddenly stop working on me on 30/06/10 while I was using it. I have music files and art for the work I do on a Web site stored on that hard drive. I got my music running and had opened the hd on my Toshiba laptop to work on things that I have towards people. My music has stopped playing its own and the hd show me the files in that my images and things were, but when I clicked on the file, there is no files inside. So, I turned off my computer and unplugged the two hds from the computer for an hour. Their return to and turned back on the laptop connected. I can still enter the WD hd, but the Maxtor one, I can't. Any time, I try to enter it, it tells me I need to format it before so I can use it. I KNOW I have not formatted and kept Microsoft Security Essentials and Spybot S & D up-to-date. I went to the Seagate/Maxtor website and did all the troubleshooting it. I also switched usb ports (my laptop has 4 of them), the cords between my works still WD and Maxtor usb and even tried to uninstall drivers and reinstall them. All my work is stored on this hard drive Maxtor and I really would rather not lose him if I can help it. I also tried to Exchange power between external hds two cords. The WD we still works perfectly then the Maxtor always told me, I need to format it. It appears on workstation as drive Local (e) instead of the name, that he was initially awarded. I know I have to not format or delete anything out of it when he started to do this for me. I hope I can recover the data so that I don't have to just start over and make people wait longer for what I owe them. (Graphics types of work on GaiaOnline a few different "shops" on the Web site.) I also hooked the hd up to a desktop computer to see if it was a problem with my computer, but even on a different computer, it still says I need to format. I am running Windows Vista, the desktop computer is running XP. Hd has also worked on the desktop before it stopped working on my laptop.

  Am running SeaTools to see if that will find and fix everything that could cause this problem.

  Hi AnthroSparky,

  See the article after some troubleshooting for your question:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• the occultation 2 active direct HDDs as a safety net in case a HARD drive breaks down

  I recently had a crash of HARD disk on me.  Unfortunately, he had given patients sensitive to this topic.  No worries HIPAA, I still have the HARD drive.  I would like to extract all the data off a broken HDD and transfer to HARD drive new, fresh, then destroy the old HARD disk to protect data on patients - I intend to use a flashlight to weld for her melt!  Now I have 2 HDD in my pc and want the secondary drive to overshadow the main drive in case of one or the others never decide to plant again.  How do you achieve this direct process shadow between hard drives?  ALSO, can anyone recommend extracting data at a reasonable price so I do not lose my patient data.  It is very important to maintain their record med elec.

  If the data is important then http://www.krollontrack.com/data-recovery/

  You can use a raid mirror array, but is not a replacement for data backups, and in certain circumstances, a defective hard drive can lead to two disks are corrupt

  If you change your PC its possible the new PC cannot recognize a table that has been created on the old PC

  The PC can have an embedded raid controller, or you can use disk management to create a raid array, you should know that allows you to convert dynamic disks, making it its own problems.

  A quality third party Raid card will cost you around $350

  Personally and having seen many problems when using raid, I have on the PC, a third-party imaging program, Acronis TI, this attitude is an image every night to a second drive. This program also features a no stop for which I have data backed up on a third backup drive.

  I also run nightly backups of data to a remote site using another program

• How can I move all win xp pro 64-bit programs old internal hard drive to hard drive internal nine win 7 pro 64 bit

  I want to install a new internal hard drive of my computer, my old internal drive is running Win XP Pro 64 bit OS, the new drive will be Win 7 Pro.

  Is there a method much less time to transfer programs from the old drive to the new?

  I have both drives in the same machine to do the transfer. If you have a set of instructions please post them to send me the instructions.

  Thanks in advance

  Sorry, but you can't do that.  When you move from one computer to another, you must reinstall all the programs.  This is because the parts of the program go to different places, and there are updates the registry involved as well.  There are also some activation to worry.  The last time, you can copy programs from one computer to another in the BACK long days long ago.

  Good luck.

• Compaq elite 8300 all in 1: Compaq 8300 allin 1 bought with HARD drive erased

  HARD drive is completely wiped and no information system have also tried the keys F11 and it too is not go... can I get HP restore disks

  You can buy all of the surgeons computer recovery discsHERE. Just put the model number - need a more complete than all in a single desktop Compaq Presario.  Is HERE IS a SAMPLE for model number CQ1-1130.  For the model that you own should be the same price.

• Transfer the library to new MBP of old MBP with music on an external hard drive

  I bought a new MBP a few months ago and have not had time to properly set up immediately. I finally get to it and have met some problems with my iTunes library transfer and re-use of my music files on an existing external drive. I always kept my music files on a separate drive in order to keep the laptop drive as empty as possible for other tasks.

  News old MBP:

  OS x 10.6.8

  iTunes 11.4

  Library was on the hard drive of the MBP

  Music files were on an external drive, called 'LACIE_MINI '.

  New Intel MBP:

  10.10.5 OSX

  iTunes 12.3.2.35

  I copied the old iTunes library to the same location on the new MBP and he watched the iTunes. Load library very well however, even if the LACIE_MINI drive is connected to the laptop, the files cannot be located in iTunes. When looking for the location of the file under 'Get Info', it points to the correct place (file://localhost/Volumes/LACIE MINI/music //) but it won't "find" and play the audio file.

  To make things a touch more confusing to me, I bought a WD MyCloud NAS with the intention that she be host store all my files music and video. My goal was to eliminate the need to always have my external plugged in when you work with iTunes. I don't know what is the reliability of this facility would be.

  From there, I have a few questions:

  1 when your stay with my files on my external and do not use the SIN, how I have it properly locate all the music files?

  2. who is the most reliable way to access my music? Through the plugged in external or NAS?

  3. should I do to keep my music on my external and load from there or make use of the NAS?

  Thank you

  K

  I copied the old iTunes library to the same location on the new MBP

  You copied into the folder full of the record of the music user account from the old Mac to the same location on the new Mac iTunes ?

  I noticed that the external drive is named LACIE_MINI on old Mac.  The new Mac, in the path of the song file, he says LACIE MINI with no underscore between the words.  Is it a typing mistake in your post or the real difference?

  For your other questions, a directly connected external drive is more reliable and faster, as the location of your iTunes media files.

• All files and folders show hidden after virus corrupted hard drive XP

  I recently got a virus on my laptop which made all the files and folders hidden and says that my hard drive is damaged. I managed to get rid of the virus, but all my files are always hidden. I went to my computer and made sure all the hidden files are visible. This fixed the problem a bit. My main problem now is that all my files and folders are slightly transparent. It's a more of a nuisance than a real problem. I downloaded a program that would allow me to change each file in groups, but it would take an extremely long time to go by a record throughout my entire computer. I was wondering if there is any means possible to put all my files and folders hidden not Hidden to get rid of their transparency.

  Thanks for any help you can give.

  See this:

  http://www.troublefixers.com/hidden-files-and-folders-are-not-visible/

• Need help to save the files/folders to a backup disc to record on a newly installed hard drive, which is totally empty.

  Last year I had everything (files, documents, photos, etc.) in my computer saved on a CD. My computer crashed last week and held our Geek Squad 'doctor '. The hard drive has been replaced, and I need to transfer or copy from the backup drive saved on my computer recently recommended. Can you please explain how to copy all my files/folders on my computer? Help!

  Last year I had everything (files, documents, photos, etc.) in my computer saved on a CD. My computer crashed last week and held our Geek Squad 'doctor '. The hard drive has been replaced, and I need to transfer or copy from the backup drive saved on my computer recently recommended. Can you please explain how to copy all my files/folders on my computer? Help!

  ================================================
  You were previously running Windows XP?

  You're still using Windows XP?

  How was created the backup CD?

  If you insert the CD in your CD drive and go to...
  Start / Workstation... and right click on the drive
  Letter it displays the directory for this drive...
  the CD? If_Yes_ what are the files names which
  you do not see?

  If it was just a simple data CD... you can copy.
  Paste the files in a folder on your hard drive.

• How can I get WMP to find all my songs that are stored on an external hard drive?

  I bought an external hard drive to store music for my product and WMP adds only about 30% of the songs to the Player library.  Some are wma and some are in mp3 format (added to the library and which must still be added).  I tried to uncheck Read-only after reading some responses online, but who did not stick and nothing changed.  How can I get WMP to find all my songs?

  I couldn't change them to read-only.  Fortunately after the computer restarts several times it work itself.

  Thanks for all the tips!