HP OfficeJet 7500 made rattling noise

Similar Questions

• CPU HP Pavilion p6-2260ea model made rattling noise

  If the computer is on for awhile or just or not, I'm online, there sometimes it hiccups-type who seems to come from the transformer. The computer is only 8 months old and has been doing this since August. The noise occurs quite regularly for half a minute or more, then a minute goes and does it again. So sometimes, there will be some noise click-hiss at a short interval. Sometimes, there is the clicking sound without following his whistle. Looks like a tiny-snap button, and then whistle. It kind of sounds like open a can of soda then an exhalation. It doesn't seem normal and driving me crazy.

  What is that noise and how it can be eradicated?

  Hello

  I have following links shows if the problem is with the fan

  http://support.HP.com/us-en/document/c01857696

  Test the hard drive by using the link below

  http://support.HP.com/us-en/document/c00386164

  Or

  The link below gives all the troubleshooting steps related to your computer that you can use.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory & CC = US & DLC = in & JumpID = oc_r1002_usen_s-001_r0003 & LC = in & Product = 5231216

  Once you perform the test of two, you would be able to establish if there is a problem with the fan or the hard drive.

• Normal palmrest rMBP 15 '' rattling noise?

  Hi all

  I'm certainly not technically minded, so sorry if it is not a stupid question / too long! I'm also new to the forum so I hope I put this in the right place...

  I have a September 2014 15 "Macbook Pro. Us build some quality problems with it (trackpad rattling, squeaking hinge) I solved last November. Now, however, a couple of new problems have emerged:

  (1) even under slight pressure (put your hand on it or, sometimes, rest two or three fingers on it) the Palm made a rattling noise pronounced, as something that separates from something else and then meeting again when I take the pressure on her.

  (2) the lower part of it can feel quite fragile, and sometimes when I press lightly on it I can hear the sound of two bits to touch metal (noise low 'thought' is the best way I can describe it).

  I was wondering if it is normal - the genius at the Apple store insisted that the mahlstick noise was just the clips that hold the main Board in place. I wasn't convinced as he only started doing a month previously, as surely that this was only the clips making the noise, he would have made noise for 1 day? They also could not find anything wrong with the below.

  I was wondering if these are problems that anyone else has met--I'm not worried that the computer is going to break or anything, it's just a little embarrassing that a premium computer has these niggles build quality!

  Thank you very much for reading!

  Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

• Black line copy/scan number Officejet 7500 has

  OfficeJet 7500 has. When do face or scanning through feeding, copying or scanning has a vertical line from the top to the bottom, near the Center. When explorations or copies are made from the plateau, this line does not appear. We have cleaned the rollers and separator, but we always get this line in the middle. There is also no line when we print from the computer... Please advise as this is a brand new computer.

  Hello Ivrwm

  I hope that your trade goes well. If you have any other questions please post back.

• OfficeJet 7500 E910 model: 0x61011bed error code

  0x6011bed error code is displayed once the printer performs an impression and to enable again the printer requires a lot of button pushes on the display of messages of 'OK '.

  I have turned off the Officejet 7500, disconnected from the power, waited a minute, deleted and reinstalled ink tanks and the print head, sucked and bluff visible dust but still cannot make the mistake go away for very long, with usually error code return after printing (print or receipt of a fax).

  I perform the extra step or need of cleanup for more than just a job printing after the error code clears?

  An additional observation: If the print job is multiple pages, once started the Officejet 7500 completes the task, but is to begin after the error code displayed is the problem.

  Hey @pauledinger,

  Thanks for getting back to me on this subject.

  Because you also get a paper jam error, you can click here to access the paper jam good troubleshooting steps. Once the support document opens just review the Solutions proposed to ensure that no paper or debris is hidden in paper path in your product. Support document also guides you through the rollers for the cleaning of the printer. Regarding a paper sensor, you can not clean the sensor itself. In addition, if the sensor is defective, it is a non-replaceable part on this model of consumption of the product. Therefore, a replacement of the entire unit would be necessary.

  After the jam troubleshooting steps, please try printing. If the error persists, can please click you here to send last programming Firmware update to your printer. The Firmware is the "brain" of your printer and control that made your printer and how your printer it. If there is a corruption in the internal programming in your printer, it can cause performance problems. Your printer must be in a State of 'ready' to 'send' to update the Firmware of the product. If your printer indicates a status of error on the Panel until the firmware update will most likely fail. Once the firmware update completed test print to see if the problem has been resolved.

  If the error state persists after checking for jams and completing the update of the Firmware a replacement of the entire unit would be the next step.

  Please let me know if the troubleshooting steps I've provided resolve this error state. Good luck!

• problem copying a3 on the officejet 7500 a

  Have recently purchased an Officejet 7500 a mainly to allow me to print and copy drawings CAD A3.  The copy turns out be a real problem because the copy is made in 2 halves that are analyzed and then assembled. the drawing resulting is not accurate is a problem that I'm a designer and designs are used by architects and Landscapers and they must be on the same scale.

  I wish that I had known before I bought it! This means that the printer is of no use to me... Thanks for your reply, at least now I can stop trying to find out why it isn't working and stop wasting time and paper!

• OfficeJet 7500 has the configuration of the fax machine with 2 telephone lines

  I have an Officejet 7500 a. The phone is a double line, phone double issue. The 2nd line/number is the number of fax. There is also a DSL service on the line and an answering machine for two lines on a phone. There is no separate cycles for two numbers.

  For installation, I shared the line out of the wall socket. We're going to the DSL modem. The other goes to a DSL filter.

  I tried to hang the black line of HP filter, then the line-1 printer. Then, out of the printer 2 - ext to a separator with several phones, including one with an answering machine. However, all the features of line 2 has been removed from all phones. I guess the line black/printer fails to pass. However I could pass the test of fax,

  So I had the idea of dividing the two lines into individual lines, feed on the second line in the printer (using the HP black line) and then again, and then recombine the lines and send them on phones. Now all the features of two line seems to work for phones, but when I run the fax test, it does not say "you do not use the type of appropriate phone cord.

  It looks like this:

  DSL filter - Splitter-L1 - L1-Splitter (recombine) - phones

  -L2 - HP Black line - 1-line 2 - ext - L2-

  I don't know why it's a failure, or what I have to do to make this work?

  For completeness, the separator is a 3 line separator, but we have nothing on the line 3. It is divided as follows:

  L1 + L2 + L3 Splitter - L1 + L3 (effectively L1)-cross

  -L2 + L3 (effectively L2)-for Officejet

  -L1 + L2 + L3 (not used)

  Ideas?

  Well, I seem to be at the end of the game. I tried sons of single line of the fax to the telephone/answering machine and fax test still does not work. I turned off also error correction mode and that made no difference.

  BUT it doesn't matter because the phones and fax all seem to work very well. I sent a fax to the service HPFAXME (several times) and it worked fine and in. The answering correctly and fax catch fax calls and ignores the voice calls. If someone meets the fax call they hear 3 beeps and the line is silent. In case, answering machine or direct pick-up on any phone, the fax is correctly. I also tried the FaxZero service and it worked fine.

  So, I will be content with that, even though the fax test fails. It bothers me because I do not let "loose ends" lying around, but since I can't read the mind of the engineers who designed it, and how they expected over this configuration, which I think would be relatively common, I'm just spinning my wheels.

• OfficeJet 7500 a: inaccessible Scanner

  My HP printer/scanner/copier Officejet 7500 a can not be detected by my Windows 7 desktop PC - but ONLY the scanner.

  Message that displayed when I try to scan:

  [Inaccessible scanner

  [Scanner communication cannot be established. If make sure that your product is powered, check the connection and make sure that your network is working properly. If these conditions are correct, restart the product and try to scan the image.
  If you have installed this printer by IP address, you may need to update the IP address. Use the IP address update for this printer start menu entry.
  If you are running a software firewall, it can block scan communication. Please visit www.hp.com/go/wirelessprinting for help to configure your firewall.]

  I do NOT use wireless scanning. I have NOT installed the printer/scanner by IP address. The printer/scanner is connected directly to my PC via a USB cable.

  Copy works fine; printing most of the time but sometimes the PC sends a print job that prints ever (and no error message). I have to unplug the power cord and plug it in again, which resets the printer and then the job will print if I return it. (I leave the printer on all the time so I don't have to turn on my PC, if all I need is the copier function).

  I do not use the scanner very often, but I have had this printer for 4 years, and the scanner has always worked in the past.

  When I got the Windows message "Inaccessible Scanner", I tried to unplug the power cord and in reconnecting it back, but the scanner was still "inaccessible". I also tried unplugging the USB cable and plug again, but still not to scan. I also tried to plug the USB cable into a different USB port on my PC, but not scan. I tried to reinstall the scanner, but Windows does not display the scanner as a device.

  Is there anything else I can try to solve the problem of 'inaccessible Scanner?

  Thanks a lot for your help!

  greenturtle wrote:
  

  ... If this does not resolve the issue, can you try uninstalling and reinstalling the software features FULL?
  
  Hope that helps.

  Hi, greenturtle:

  Thanks for your reply. I solved the problem by uninstalling and then reinstalling the full features software - and that solved the problem!

  Cyndi

• OfficeJet 7500 a print in different color

  OS - Mac OS X Yosemite 10.10.1

  Printer - Officejet 7500 a E910

  We have a problem in print in Officejet 7500 color, the color is different in print. While the printing system Windows, all good id form. How can we solve this usse?

  Thanks in advance

  Ruggeri

  Hi @Sinoj

  It seems that there could be something in the printing system which is at the origin of the ot printer driver for printing color. Please follow the following steps and let me know the result;

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Satellite A500 - rattling noise

  Hey guys,.

  I ve bought my A500 a month ago and since I got it, there is a small click on the right side, then where is the Num-Lock button.
  I Don t think it s HARD drive because it is not a permanent by clicking, it's like * click * seconds later * click * and so on...
  I heard that NHC (Notebook Hardware Control) should solve the problem, but I have windows 7 64 bit and the NHC doesn´t work under this version.
  So guys do you have an idea what I can do to stop it by clicking on? :)

  Sorry for my English but I m from Germany ;)

  Hello

  > I Don t think it s HARD drive because it is not one clicking permanent, its similar in a few seconds click and so on

  As I know, only the hard drive can make rattling noise in laptop computers.

  > I ve bought my A500 about a month ago

  Do not wait and go to AEP (SAV) which you can find here:

  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

• Surface 2 compatible with Officejet 7500 RT

  The Officejet 7500 of large Format e910 printer is compatible with the Surface 2 RT win 8.1?

  Try to follow the instructions for RT in the document in my previous post to get the printer installed in Windows first.  The printer should be available in other applications where printing is possible. Make sure the printer is set as the default printer as well.
  Let me know if it works outside of the HP AIO App.

• OfficeJet 7500 has 910: officejet 7500 a E910a

  I use Mac OSX 10.10.5 - they have more a driver that will support the officejet 7500 has 910.  Y at - it a fix for this.

  Hi @adiedrichsen,

  Welcome to the HP Forums!

  I see that you are looking for a driver for your printer HP Officejet 7500 a E910a on Mac OS X 10.10, and I'm happy to take a look for you!

  There is no full feature software and drivers available directly from HP on this printer and operating system.

  However, there is a driver by Apple which gives basic printing and scanning capabilities, you can download this driver by accessing this Web site, HP v3.1 for OS X printer drivers.

  Scanning without HP software, please see this post, Re: iMac OS X 10.9.3 Scan for iMac driver for HP OfficeJet Pro 8500 a A910a does not appear to be, by my colleague @Sunshyn2005. That applies to your printer and your operating system, as well.

  Hope that answers your question and have a nice day!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• HP officejet 7500 E910: unable to connect my HP printer to laptop

  I can't get my laptop (Toshiba Satellite) to connect with my printer HP, (Officejet 7500 E910). This printer was working with this computer until I experienced connection problems. Thought it was my router and replaced by the new router, (BelkinAC1750 DB). Router works fine with the laptop and another, (which has Windows 8.1). I can't connect either wired or wireless for printer or PC. I rebooted to update software that is recommended with this printer that is listed as compatible with windows 10 twice. When I run the HP software to solve problems, it shows the installation is successful, but I get a file error when I try to print.  I tried to reconnect several times to the network, but I think that the IP address on the printer set up display is wrong, but I don't know how to check this. The HP software troubleshooting help gives this as a problem, (the IP address is incorrect or a wireless network).  I disable firewall and antivirus with no result. I read all the suggestions I can find without success. I would like to reset the printer to the original configuration, but I can't find the method to do it. I think the problem is with the printer. Any suggestions would be greatly appreciated.

  I discovered how to reset my default settings for the touch screen of the printer. It's under the 'Tools' menu, I didn't just not scrolled to the bottom. I have reset to the factory settings and then you had to use the HP printer Assistant, but I connected the printer to the network successfully with the correct IP, 192.168.2.171. The two PC is now no trouble-free printing. I don't know how I got into this mess, but I know that it is with your help that I managed to find a solution. Thank you for your time and your efforts. You saved me time and money.

• HP officejet 7500 wide choice option paper

  I don't really know what you'd call the Micro Soft Surface Pro 2, because it works like a laptop but it is also like a tablet.  My problem is when I want to print on my HP Officejet 7500 large-format printer, I can't choose a large format paper, because it does not appear in the options.  It was on my old laptop.  There was even a choice of paper size custom, but that does not appear.  What is the windows 8 or the surface pro itself.  I tried the solution everywhere without any help.  I need to print 12 x 12 for project this weekend.  Any help would be greatly appreciated.

  Hi kerobbymom, welcome to the Forums of HP. I understand that you are not able to select the page sizes large-format for your Officejet 7500 has large Format e-all-in-one printer on your tablet of Microsoft Surface. Looks like your printer has been installed with the built in Windows drivers and not the drivers of HP.
  
  This is the page for the driver for your printer: HP Officejet 7500 a large Format e-all-in-one printer - E910a drivers
  Select the required operating system and download the software HP Officejet full feature and the driver. Once it is downloaded to install the software and follow the instructions to install it.
  
  Let me know how that turns out.

• OfficeJet 7500 a: officejet 7500 a and windows 10

  A3 format is no longer supported

  I installed the latest drivers again, but the A3 format no longer exists.

  Hi @Bart2015,

  Welcome to the Forums of HP Support!

  I understand that you are unable to select the A3 format for your HP Officejet 7500 a printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I'm curious to know if the printer is using the correct printer driver. Check the device and printers to see if the class driver is used, rather than the HP driver.

  To devices and printers.

  • Press the Windows logo key + S to open the search.

  • Enter in devices and printers in the start search box and press or click devices and printers.

  If you see the printer HP Officejet 7500 a class driver, please re - add the printer using the HP printer Assistant.

  You can also run print and scan doctor to determine if the driver is damaged or improperly installed. Download and run the print and Scan of the doctor.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  Also, here is a link to the latest print driver if you need.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!