HP Officejet 7610 all-in-one. where to place an item on the glass tray to copy?

Similar Questions

• HP Officejet J4580 all-in-One: where the printer cartridges are located

  Where are the cartridges of printers that are located on the HP Oficejet J4580 all-in-One printer

  The ink cartridges are located inside the printer. Go here... http://support.HP.com/us-en/product/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3645099/manuals download the User Guide and read page 10 for see where.

• HP Officejet J4580 all-in-One: I just need a disc from the drive, please!

  OS was wrong?

  Hello

  The disk may be too old now. If please download and install the following software and driver:

  http://ftp.HP.com/pub/softlib/software10/COL22247/MP-58704-2/OJJ4500_Full_10.exe

  More resources:

  http://support.HP.com/us-en/product/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3645099/drivers

  Kind regards.

• HP OfficeJet 7310 all-in-One slow takes 15 minutes to print the page

  Why my HP OfficeJet 7310 all-in-One printer suddenly run so slow it takes 15 minutes or more to print a page? I use MacBook with OS 10.7 Lion and reinstalled the latest drivers that have been for OS Snow Leopard. How to speed this up?

  Hello

  If the same behavior appears in copying autonomous

  Even though the USB cable is disconnected, so the computer is without impact on the device and not related to the problem

  By the information provided, the problem is with your printer hardware

  However, make sure that your cartridges are without impact on your printer

  Make sure the expirations of ink did not both for black and color, as well, try to isolate the problem and check if cartridges it may as follows

  Remove the color cartridge and try to print from the computer

  Now repeat the same thing with black ink only

  If the problem occurs with a specific cartridge only, replace the cartridge.

  If the same behavior is displayed for either of these tests, I suggest you try a different power outlet. If there is no change yet, contact the HP call center in your area, in an attempt to reset your device.

  It is our last chance, otherwise it will repair the product

• HP Officejet 4632 All in One – scanning with a vertical line through the document.

  Just bought the machine less than a month ago.  Faxes and prints fine and until last week was the sweep for our laptops beautifully... but now is scanning with a dark vertical line up and down the sheet about 1/3 in the document.  What is the cause and how can I "fix" it?

  Any suggestions?

  Thank you

  Hi Rohi63.

  I understand that you have a 4632 Officejet which becomes a vertical line what it is scanned. I'm sorry to hear that, but I'll do my best to help you.

  This seems not only to be the case when using the automatic document feeder, or the glass flat?

  Usually something like this is caused because there is something on the glass. If it only happens when you use the scanner, please get a lint cloth and some glass cleaner (Windex or water if nothing else is available) and wipe the entire surface of the glass for scanning. If this only happens when scanning via the charger, you will see there is a separate strip of glass on the left looking at the scan glass, and you can focus your cleaning there.

  If this does not resolve the issue please try the steps in cleaning several times, but if nothing seems to evolve, please make sure that the printer is connected directly to a wall outlet so that we know, that he has all the power it needs.

  Hope this helps, have a nice day!

• HP OFFICEJET 7310: LOST INSTALL CD FOR OFFICEJET 7310 ALL-IN-ONE PRINTER - ANYONE KNOW HOW TO FIND THE DRIVER FOR IT?

  ANYONE ABLE TO WALK THROUGH WHERE TO FIND THE DRIVER FOR PRINTER HP OFFICEJET 7310?  I LOST INSTALLATION CD YEARS.

  Hello:

  You can download the driver from the link below...

  This download includes the HP Photosmart and Officejet Software Suite (advanced imagery and product functionality) and driver.

  File name: AIO_CDB_Net_Full_Win_WW_140_408 - 5.exe

• HO Officejet 6110 all-in-one printer gives a message to check the cartridges

  The above printer has always worked well so far.  I have a message to Remove and check cartridges. I deleted them several times,

  turned the printer market and unplug the power cord, etc.  The same message keeps coming up.  I changed one of the cartridges-

  put in a new color cartridge and it is still there.

  What can I do?   Help!  !

  Hello Renee,.

  Have you contacted HP about this?

  Maybe they're the best people to answer that for you because they know the material side of the printer.

  We use HP cartridges or are they off-brand?  Sometimes, off brand cartridges do not recognize properly.

  My recommendation would be to get the entrance of HP on it.

  Best regards

  Matthew_Ha

• HO Officejet 6310 all-in-one: 6310 print only 1/2 of the first photo on 2 5x7s

  I use HP photosmart Essential 3.5 on Win 7 pro 64 - bit Home to print photos, I am printing 2 5 x 7 photos by 8.5 x 11 pages, the printer load photo paper and sometimes sends an error "on paper", I hit ok and it prints but it prints 1/2 or less of the first photo and any 2nd photo the quality is great, just want to print the entire photos and no ink on half of the photos, any help would be great thanks.

  Thom

  Thom,

  Sometimes, the results depend on the program you're using to print.

  Test the printing of two photos on 'plain paper '.

  Make sure that the media type is correctly selected (Photo paper)

  Try / consider:

  Try to print pictures using Windows Photo Viewer > as well as other settings, check that you have enabled "Copies of each image.

  

  Reference and examples:

  Print - Programs_and_Methods

  Section:

  • Photo printing with Windows for Windows Photo Viewer

  Paragraph > print Photo on the main plate

  -----------------------------------------------------------------------

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• OfficeJet 4500 all-in-One Printer G510h - can't scan using the printer or HP Solution Center

  When I tried scanning document/image of my desktop with the use of the HP Solution Center, by pressing the button scan, printer/scanner does not react but simply go back to the home menu. I've tried a few things: reinstall the printer driver, restart the computer, unplug and turn on the printer, but it's the same thing happens again.  When I tried to scan the document/image directly from the printer/scanner, the following error message appears on the HP Solution Center:

  "An error has occurred with the HP scanning application. Try the following steps after each step, try to scan the image.
  -Restart the program
  -Restart the computer
  -Reinstall the HP Photosmart software that came with the device. »

  However, there is no HP Photosmart software supplied with the unit.

  Hello

  Please perform the below mentioned steps that should solve the problem.

  Click START > computer > C: > Program files > HP > Digital Imaging > Bin > right click on hpscnapp.exe, and then click SEND TO OFFICE.

  Back on the desktop, and then double-click the shortcut icon hpscnapp.exe , he would open the interface to start scanning.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give a Kudos!
  I work for HP

• After you have installed officejet 4110 all-in-one does not open the Director icon

  I have a printer HP Officejet 4110 all-in-one. It was not used in the month. Tried to print and no action. Printer test, self control and everything is OK. So I uninstalled the printer. Then reinstalled the printer. The Director icon is non-functional. I can't open the icon on the desktop, or I can open the Director by clicking on it in all programs. My system is Windows XP. If anyone has experienced this? If Yes, what is the fix for this problem. Thanks in advance.

  Thank you sincerely for your help to help me solve my problem first. Good job on the money. I now look forward to additional help on your part. Once again, thank you. Hitnmiss

• Where can I find drivers for HP officejet 4215 all in one printer

  Please can someone help provide me the driver for hp officejet 4215 all in one printer... I have tried severally to download from the Hp support center but no luck... Thank you very much

  Original title: DRIVER of PRINTER

  http://support.HP.com/us-en/product/HP-OfficeJet-4215-all-in-one-printer-series/351105/model/351107/document/c01796879/

  HP print driver printer - install and use the built-in Windows

  This document is for HP printers that do not have a driver of HP full features for Windows 10, Windows 8, Windows 7, or Windows Vista.

  If a full features of HP driver is not available for your printer, you must install the print driver built-in. A complete driver functionality for one or more versions of Windows is not available for your printer, either from the CD that came with your printer or the site HP Web.

  Where is the download button? HP print driver is integrated into the Windows operating system or installed through the Windows Update function on your computer. You don't need to download anything from a Web site to print, scan or fax.

  See the frequently asked questions in this document for more information, including how to scan using this driver.

• All-in-one HP Officejet J4550: hp officejet j4550 all-in-one

  My moms computer was installed by my father and already the installation of the printer. She then began having some problems when printing lines by slots empty words in words. I tried cleaning the printer option, but that has not worked, also tried the alignment of cartridges but that also had problems, sometimes it could not detect the scanner test sheet and then we would say a mistake and return to the default settings. I was then going to the computer application, but he missed. I guess that when it was installed, it was not a complete installation.

  I then started to re - install from the cd without uninstalling it first. Thought it would be OK and just replace the existing files. Sometimes, this works for programs and sometimes you will need to uninstall first. When I loaded the cd it says that this version of windows was not compatible. Then, I searched the net and found this thread of Hp.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/Windows-7-and-OfficeJet-J4550-install/...

  I downloaded the new installation for win 64 files and down them, before he installed it there was an error (empty white error with a red x) and it wouldn't install. Then sent information to HP and said it has found a solution and downloaded to the desktop. Basically, he wanted to fix my installation but unplug the printer. So I did this and it worked fine during installation. Then when he got at the end during the setup I got a fatal error. Something about the configuration has expired or has been too long and we also found several files of HP. So he started to uninstall itself. I thought having bad uninstall programs, then put it back. So I did, worked well until the config part and then he did the time out or another error. The mistake of never came however duplicates. So I cancelled as fast as I could. I can print and scan from the program on the pc. But it lacks the features of the printer itself. As if I hit him scan it tells me to consult the manual. I just want to complete installation work. Any thoughts?

  I did all the steps, downloaded the packgage, uninstalled using l3.bat, did drop cleanboot, reboot, update adobe Flash Player as well as cleaning. Download the hp installation wizard. When running the wizard, it says there is a problem with my driver, then it starts to connect to the internet to download the software, but then said the download was cancelled, click Retry to try again but the retry button does not work. I have mcaffee AV, the only way ive seen turn off is to disable on the analysis of access and the firewall.

  Don't you have an another clean boot and no driver error, but the same error message when the installation wizard attempts to download the full software. Simply use the version of the software from the link has me http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645096#Z7_3054ICK0KGTE30AQO5O3KA30R1

  FINALLY HE GOT WORKING:

  Downloaded the basic print and scan driver package, ran the installation and it did not work. I started to think there must be a driver problem. Had similar problems with itunes where it wouldn't read my ipod even after an uninstall and reinstall. And for that I had to remove the driver and reinstall it, for some reason any it was causing problems.

  Make sure the name is exactly the same as the folder. After its extraction do the same for the complete package. After extraction, a HP screen may pop up, just close for now.

  1. If the printer software is installed, uninstall it.

  2. with the connected printer go to devices control panel\ Manager, right click on your printer and click on uninstall. Check the box in the lower right corner that says something like "Do you want to remove the software driver or files" then click on uninstall.

  If box is displayed, and then click cancel, right-click on your printer and select Properties, click on the driver tab at the top, then the Details button pilot. make a new file .txt on your desktop and enter in all of the files and the locations of eveything that appears. After that click OK, then driver tab, click on uninstall.

  Here are some of the files and locations but check they are all listed and not missing anything.

  c:\Windows\system32\drivers\usbscan.sys

  c:\Windows\system32\hpotscl1.dll

  c:\Windows\system32\hpowiav1.dll

  3. open a new file and copy and paste the address of each file in the search bar. It will look something like this

  c:\Windows\system32\drivers\usbscan.sys

  before hitting enter each need to be edited windows otherwise think you try to open the file rather than access the folder. So for the modified example will look like this

  c:\Windows\System32\Drivers

  the drivers folder is what you want to be in and the usbscan.sys is the file you want to check is removed. Do this for everything in your list. If the files have disappeared that has, if not manually delete them or move them to a new folder on the desktop until installation is complete just in case.

  4. (computer may or may not need to be restarted) and then unplug the printer, open the software package and the base driver and double-click setup.exe. Do the installation and when it asks you to connect the printer.

  5. after its installed according to your needs, you can either test its features to see if it has what you need or you go to install more packages / programs from the full version.  Double-click setup.exe for the full package, then it will ask you that you if you want to uninstall or install more software, select the installation of the software. He can just show 1 or maybe a little. If its does not display those you want to click on the buttons more or less recommended until you find what you are looking for. You can try to install more then one at a time, but for me it did not work, I had to do one at a time.

  As far as the folders on the desktop used for extraction, it is a good idea to keep those with your backup files unless you use a restore image, but it good to keep because the backup even images may have problems. I would recommend save their be on a cd/dvd, USB drive, external hard drive, the cloud storage lol somewhere just in case you need it again as well as installation instructions. If you have moved all the files in the driver instead of delete and your printer now works, you can remove them.

  NOTE: If keeping the package for later use, Exchange compressed files for those who have been extracted because they take less space. Unless you want to just the ones extracted. (Compressed are those you downloaded from HP in the folder downloads, extracts are those in the office used for installation folder.)

  And thank you Gemini02 for helping me with this.

• OfficeJet 4215xi all-in-one: scanner

  My officejet 4215xi all-in-one decided to stop scanning correctly.  I feed my original in the automatic document feeder (as I did for years), it is no longer pulls the documents in the leading pace the digitized the image being spread or with about 2-3 inches of white space on the leading edge. I listen to the officejet, looks like it starts scanning, but the paper don't be pulled ahead for a few seconds (where white space and text image burrs). Yesterday, I was able to scan one page at a time with a bit of success, but today I can't do and I'm now getting an error message that the scan was not successful. I hope someone can give me the steps to get this corrected.  Thank you!

  Hello

  I'm glad to hear that your problem is solved and everything works fine now.

  The extended Scan software is the last software scan appearance fo the HP.

  Good day!

• Officejet 6310 all-in-One fainted during the printing and copying

  I have an Officejet 6310 all-in-one.  I have Windows Vista.  Yesterday, I replaced the black cartridge with HP98.  Now when I make copies or print a document, print the page gets more light and more light, about 1/3 to 1/2 through the page and very light down by a horizontal white line through the text.  I cleaned the cartridge with a damp cloth, I ran the command of cartridges clean but also align the cartridges.  I turned off the printer and unplugged and restarted again.  When I run a self-test page, especially the black line went up to 2/3 of the way, then it is empty at the top and gets darker, then the last 1/3 is fine.  The test pattern shows a few holes in the grid to black.

  I just checked the cushion under the black ink cartridge and it is saturated with ink.  I don't know that is where the problem originated.  I would be very grateful of any advice to solve this problem.

  Thank you.

  Is it a HP cartridge or a charging/reman?  It seems to be a faulty cartridge.  If it is an original HP, then check the warranty of the cartridge as shown here.

  It is unlikely that the ink that you see in the field of the service station is the issue.  The ink that you see is the result of the normal maintenance routine that the printer uses to keep the printheads from clogging.  It is normal that there is ink in this area.

• HP Officejet 5610xi all-in-one

  Can the HP Officejet 5610xi all-in-one scan photos and download on my Mac OS X 10.5.8?  I want to e-mail photos sent spare. Series #CN5CUDG6PN, product # Q7310.  When I try to scan it flashes refer to the device documentation to get out of trouble.

  I can scan a phoot and print.

  Scanning from the printer for Mac takes some setting up.

  Try scanning your Mac instead

  Go to Applications-> Hewlett Packard-> HP Scan, then click on the scan button

  Once it has scanned you can go to the file->, save, and save the image to where you want to

  Now, create an email and attach the image