HP officejet 7612: "There is a problem with the printer or ink system". That is the message, no error code.

Similar Questions

• HP Officejet 5740: there is a problem with the printer

  Every day the printer (not standby) turns on and shows "there is a problem with the printer. Turn the printer off, then on. "why what is happening every day?

  This problem got solved, later. Although tech hp sent me the ink HPInstant and that they "reset" of my printer, the error message returned in a few days and continues every day. Another call to Tech Support/InstantInk advised me to return the printer for an Exchange (it's 60 miles a way back). We decided to install Instant ink cartridges, as a last resort to resolve the error messages, and it worked. No error message. I put the original ink cartridges in the printer I can use those to the top. Still no error message and this printer now works well. PERSONAL OPINION: When we enrolled in instantink, hp tried to contact our printer via wireless (whatever) and when it failed an error occurred every DAY, after the installation of the instant ink cartridges a connection has been established at hpinstantink have finished the registration process.

• HP officejet 4620 there is a problem with the system printer or ink 1000008 0x6

  PTR does not print page alighn.  keep saying "there is a problem with the printer or ink system 0 x 6 1000008' I turned market several times."  I unplugged.  I remove and reinsert the ink cartridges. I removed and reinserted the paper AND

  I always get the same message!

  This article should help to resolve the error you get:
  http://support.HP.com/us-en/document/c03081973

  Try the steps and tell us if it helps.

  Good luck!

• problem with the wireless mouse error code is pimou.sys

  I am trying to install a head mouse 3300 gears on a computer wireless laptop windows 7. He considers it, and install a driver then goes to blue screen, stops and gives error pimou.sys

  Anyone has an idea as to how I can solve this problem?

  Thanks for any help that anyone can give.

  John

  Hello

  Actually contact the manufacturer of the mouse support.

  You can ignore all the errors of the adapter. And they are not related to your problem of mouse.

  Don't you worry about this unless you have found errors. If so see these threads.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/754c8f29-3a87-4E77-Babd-a69c8910e17e

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/05a8849e-89c1-4CC9-8004-f6d07a4fdf8b

  http://www.cableforum.co.UK/Board/34932105-post6.html

  ====================================

  A new Microsoft 6to4 map is created unexpectedly after restarting Windows 7 or Windows
  Server 2008 R2
  http://support.Microsoft.com/kb/980486

  How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7
  and Windows Server 2008
  http://support.Microsoft.com/kb/929852/en-us

  Response of Lionel Chen
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

  I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

  It is said:

  "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

  I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

  HP Officejet Pro 8600 +.

  Product number CM750A
  Sequence number {content removed}
  Not under warranty

  Please notify.

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
  http://goo.GL/BXDFf
  
  It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

• HP Officejet 6600 Guard giving the message there is a problem with the printer or the ink

  HP Officejet 6600 Guard giving the message there is a problem with the printer or ink. We have already tried to turn off then, have you tried unpluging and nothing works

  OK so I solved my problem normally my printer tells me what was low on ink im although there no and homesick, that I had to replace an ink catrige and his works now

• OfficeJet Pro 6830: there is a problem with the printhead - estimate of repair costs?

  Getting the message "There is a problem with the printhead".  Found the document tracking and troubleshooting got to step 3 where it says "the printer to Service."

  Naturally, when I checked, I found that our guarantee missed three weeks ago.  The printer lasted more than a year...

  No idea what it would cost for this repair?

  Or given the pricing model for ink jet printers, are we better off he throw?

  We had an Epson printer that has lasted several years; Maybe we should go back to them?

  Hello

  Try to contact the HP Support by filling out the form below, you will receive a case number and the details of the phone:

  Note: Changing the country click and select your region as required

  https://support.HP.com/us-en/contact-HP/product/HP-OfficeJet-Pro-6830-e-all-in-one-printer-series/5390307/model/5390308

  Be sure to have proof of purchase available to provide the necessary technical support representative.

  In my opinion, that they might be able to help without charge if shortly after the end of your warranty period (even though I'm the head of my experience, not on behalf of HP).

  Do it as soon as possible and let me know how it goes.

  Shlomi

• OfficeJet Pro 8600 +. Error "there is a problem with the printer or the ink system... »

  OfficeJet Pro 8600 +.  Once we replaced the ink cartridges, our printer gives an error "there is a problem with the printer or the ink system.  Turn the printer off, then on.  If the problem persists, contact HP.  We've gone through the start/stop several times.  We also pulled back and ink cartridges in, in addition to taking the print head at.  I ran a diagnostic test download and it comes back with "unknown error (06).  Help, please!

  Thanks for your reply.  We exchanged all Costco ink cartridges and the printer seems to work very well at this point.  Yes, we did all of the print head and cartridge cleanings.  Nothing seemed to help.

• OfficeJet Pro 6830 e: Message 'there is a problem with the printhead"

  How can I fix there is a problem with the print head.

  Hello

  If I could get help on the questions of my print head on my e-ALL-in-one-HP OfficeJet Pro 6830 series. I found information on the HP site that there are problems with this series and there may be given replacement printers. idk

• OfficeJet Pro 6830: There is a problem with the printhead

  There is a problem with the print head.  Or can not find the print head

  This problem just started happening. Everything was ok after replacing the cartridges of printers with HP cartrighes for this printer, printed since the replacement of cartridges.  I followed the instructions given by your troubleshooting solutions.

  turned off and unplugged, removed and replace the cartridges back in, printed on a sheet of paper indicating that the print head was aligned, printed what he needed at the time and now does it again.  I repeated the above instructions and it just keeps saying the same thing.

  Open the link: www.hp.com/contacthp/
  Enter your product number or select Auto detection
  Scroll up to "still need help? Fill out the form to select your contact options.
  Scroll down and click on: contact HP options - click Get phone number
  A file number and phone number will be displayed.

• OfficeJet 6600 - reports HP Connect "problem with the printer.

  I just bought an all-in-one OfficeJet 6600 and immediately installed on my MacBook Pro. Installation went smoothly, and I used it for scanning and printing. I am very happy. However, I noticed that HP Connect reports "Issue with printer." Well, it worked fine, so I ignored the error and continued to work.

  Tonight, I have installed the printer on a Windows 7 laptop. At HP Connect, it is always now reports "Problem with printer." That's it - no further details and no symptoms of any kind of problem. How to diagnose the 'problem' and how to fix it?

  Hi there, I know this may seem illogical, but I wouldn't worry too much about the problem with the printer State message in connected HP. I saw myself sometimes, and I was able to print successfully from a mobile device to the printer which connected HP indicated that there is a problem. Have you tried to send a job by using either the application mobile ePrint or to the e-mail address of printers for the printer in question?

  On the Windows 7 machine, you can also download and run the HP print and Scan Doctor to confirm there is no problem with the connection to the computer on which is installed the software of the printer or the printer hardware. Be aware, however, that the application is compatible with the Windows operating system only, so you cannot run it on the Mac computer, but unless you are having problems printing from Mac to the printer, there is no reason to suspect that anything is wrong.

  Hope that makes sense, but post comes back with other questions.

  Best.

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Hello there is a problem with the iphone 6 and you do not want to connect to the Apple Store

  Hello there is a problem with the iphone 6 in more you won't connect to the Apple Store.

  

  Buenas tardes,

  Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

  Then sign out of the iTunes Store and reconnect.

• 7640 ENVY: ENVY error 7640 "There is a problem with this printer"

  Hi guys. I had this printer 4 months ago and it worked as wonderful. But this weekend when I turned it on the error "There is a problem with this printer" appeared right after it connected to my wireless network.

  I did several tests and the error comes only if the network is connected to the internet.

  When it is not connected to the internet fine print (prints, scans, all via wifi) jobs.

  I have a MAC and airport Time Capsule.

  Is there a set any that solved the problem?

  Now it's working. The problem was Auto IP. Set it to manual and it started working.

  Thanks in any case.

  Concerning

• I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

  I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

  (1) temporarily disable your security/antivirus software

  (2) download iTunes from the official source: http://www.apple.com/itunes/download/

  (3) try to reinstall

  (4) turn on your anti-virus