HP Officejet 8040: guaranteed

Similar Questions

• HP Officejet 8040: White line, do not print, vertically when printing from HP Officejet 8040 all in one.

  The white line appears when I print. This has nothing to do with the scan or copy.

  It's about everything that I print and sound always vertical and in the same place.  The Interior of the 8040 seems pretty locked. Not much to go and see what it could be at this place in the printer. I ran the vacuum cleaner at least 5 times and the alignment of 3 times. Help, please.

  

  The problem you see may be caused by a spot on the MICR band.  You can clean the Strip as shown in the here document coding.  Be aware that the coding Strip is fragile and there are fine lines, printed on the Strip that are essential to the proper functioning of the printer.  Be very gently when cleaning of the band, if you're too vigirous band (and printer) will be damaged.

• HP Officejet 5740: The Officejet 5740 printer is sending a document feeder of error message cannot read original documents

  HP Officejet 5740 printer sends an error message indicating that the document feeder could not recover the original document.

  Hi @angelahouser042,.

  Welcome to the Forums of HP Support!

  I see that you have problems in your ADF on your HP Officejet 5740 e-all-in-one printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I recommend that you follow the steps in this guide:

  • "HP ENVY 7640, 5740 Officejet and Officejet 8040 e - all-in - One Printer Series - a Message ' Out of paper ' is displayed on the control panel and the printer doesn't pick up paper

  Please follow: step 3: clean the ADF rollers and separator (optional) buffer.

  Hope that answers your question. Please reply to this message with the results. Thank you for posting!

• HP OfficeJet 8600: Print using black ink only

  We use our printer as a copier only.  It is not connected to a computer.  Why do the color cartridges run out of ink and we cannot print black print.  We print any documents using color.  Is it possible to turn on the black only?

  Sorry, but the HP Officejet Pro 8600 has separated from the inks and printheads and requires that all inks are available to avoid damage to the print head.

  You can minimize the ink used with the following steps:

  • Use draft mode when the quality is sufficient.  Draft mode uses about half the ink or Normal or best mode.
  • Power switch of the printer only allows to turn off the printer.  If an external switch (as a protector or output impulse) is used more ink will be used at startup.

  HP and other printer manufacturers have technology another printer for different needs.  For ink jet printers:

  • Some have integrated into the ink cartridges print heads.  These printers can print generally with one or more of the colors completely empty, or even with color or black cartridges (but not both) removed. The Officejet 8040 has us an example.
  • Other printers have separate replaceable printheads and inks.  An example would be the printer Officejet 8600.  In these printers print head can be replaced if they are damaged by running the printhead with colors off.  Some of these printers allow printing with a color, the other will not.  If the printer is run without ink in one or several colours, the printer may be damaged, but the user may be able to recover without having to send to the printer for the service.
  • Other printers have permanent print heads.  To run only those without little ink in all colours would risk causing damage to the print head because of clogs, air ingested in the printhead or grilled printhead resistances of shooting. The Officejet 6700 is an example of this type of printer. For printers with fixed print heads that could require the service to get the printer to print properly again when the ink is finally replaced.

  The document described here how the ink is used.  The document is written for inkjet printers HP the same principles apply to printers inkjet from other manufacturers.

  If you do ever print color laser printer would probably be a better choice.  If you occasionally print color but especially black a HPI printer as those in the first category above can be a good choice.

• Ink cartridge in Exchange

  I bought a new HP printer in 2 July 15 because HP stop support of my HP printer I had at that time here. I want to exchange and unopened 74XL black cartridge for a black 62XL cartridge that would work on my new printer HP Officejet 8040. How can I do this?

  Hi @BCOPP,

  Welcome to the HP Forums!

  For your ink cartridges exchanged, please contact HP, telephone support for further assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Best regards!

  "Please click the Thumbs up icon below to thank me for having responded."

• Want 4500: How to scan to e-mail from my desire to 4500

  Hello, how can I email a scan directly from my printer, I have can´t look for the scanning application to E-mail my urge 4500 All in One Printer.

  I bought this printer because it is stated in the product specification Page:

  Hello again,

  5530, 5640 envy envy, envy 5660 and 7640 want all support scanning to Email to a stand-alone printer. Of course, the printer must be connected wireless to a network and the network must have access to the Internet. These models also support scan to PC, as long as you install the software provided with the product.

  I have a 7520 Photosmart and Officejet 8040 with e-mail stand-alone scanning and personally, I love it. I find it more practical to send files directly from the printer.

• cf286a: Scan to Email without a computer

  I need to configure a scan to e-mail setup in a very remote to be exploited by unschooled people. Hand written forms must be sent. Fax equipment does not have the limitations of the cell, but I have high speed internet and WiFi.  A computer cannot be used, but we need to send an email directly from the analysis. I thought a LaserJet cf286a but can buy any other model available in southern Africa. The operation must be as simple as possible. Is it possible and what model is recommended?

  Hello, the Laserjet printer you have does not support stand-alone scanning to e-mail. HP, however, has a number of inkjet printers who manage the scan to email via the pritner - pritner to installation over network with wireless access to the Internet, select web services and create a scan to e-mail with an e-mail account. You don't need a PC to configure the printer, and you don't need a PC to send scans. Here are the models that support. (I'm in the US and do not know what is available in your area)

  Photosmart 5520
  Photosmart 6520
  Photosmart 7520
  Want 5530
  Want 5640
  Want to 5660
  Want 7640
  OfficeJet 5740
  OfficeJet 8040
  OfficeJet 6500 has
  OfficeJet 6600/6700
  OfficeJet 7610
  OfficeJet Pro 8500 has
  OfficeJet Pro 8600
  OfficeJet Pro 8610/20/30

• HP PHOTOSMART e-ALL-IN-ON 5520: hp/instantink

  Is my printer eligible services "hp/instantink"?

  Sorry, only the following printers are supported by the program of the instant ink:

  • HP ENVY 4500 Series
  • HP ENVY 5530 series
  • HP ENVY 5640 series
  • HP ENVY 5660 series
  • HP ENVY 7640 series
  • HP Officejet 4630 Series
  • HP Officejet 5740 Series
  • HP Officejet 8040 series with Neat®
  • HP Officejet Pro 6830 series
  • HP Officejet Pro 8610 series
  • HP Officejet Pro 8620 series
  • HP Officejet Pro 8630 series

• My Officejet 4620 do not print black ink

  I replaced the black cartridge on my Officejet 4620 with a new high-capacity HP cartridge and it won't print black ink on the test page, any application or function of Copier.  I have reset the printer nothing helps.  The ink level indicates that it recognizes the new cartridge and says it's full.  Black ink out of the cartridge when I put my finger against the exit hole.  I cleaned and aligned the print heads, but still no go.

  just in case someone else has this problem, heres whats really past and heres how to fix this annoying problem. its relatively easy to do and more efficient than wasting money on a new printer or have that he repaired as most people eventually do.

  going on what? the ink has clogged print heads and solidifies closed. the function of "clean print heads" the printer comes with doesn't have the ability to solve this problem. This feature is to clean the heads Sales, not clogged heads. Why hp decided to make this model without a simple to remove the cradle is beyond me, but fortunately the cradle out and can be cleaned with hot water.

  theres a few items, you will need to get there easily, or you could just burst the branch loppers, like I did and vent your frustrations.

  you will need: a pair of slender beak pliers, a screwdriver torx T9 (selling auto parts stores them for a few dollars), paper towels and a space for work (its easier to do this in a corner of a room, on a small table or floor).  Keep in mind that you are dealing with ink, then change your clothes right just in case and also catch a paper plate or a few sheets of paper to print to set ink cartridges while you work.

  (1) ok. lets start. !!! FIRST UNPLUG THE PRINTER RIGHT NOW, IF YOU DO NOT ACCIDENTALLY DIE BY ELECTROCUTION!  I forgot and when I started unscrewing the first 6 screws, kept chime jump and im like * beep *? I was impressed by the security measures hp took as model engineering.

  (2) the printer is now disconnected and then go to your corner your work surface and place the printer, so there is a wall or a barrier on the left, and also, a wall or a fence behind it. This just in front of her as if you were about to use it.

  (3) now, what you have to do, is to open the printer as you will change the ink and on the right side, there is a plastic guide that prevents opening all the way to the top. Look on the side and you'll notice that he could jump off with fingers. pop off and open it completely open, so you can get to the screws of the cover you would have prevented access to.

  (4) press the scanner part and the upper part against the back wall.

  (5) all the screws you will be remove are the size T9H torx screws. There are ten total. There are 2 black screws in the top of the forehead and then 4 black screws in the top of the back. Remove them and put them on your paper plate.

  (6) following is 1 screw silver short located under the Control Panel, use your finger and feel under the * button. Unscrew, place it on the paper plate.

  (7) depending on whether you want to remove the face/Control Panel to get in the last 3 screws so locate the illustrations on the top of the printer, there are 2 on the lower left and 5 at the bottom right (1 and 2 on the left explain removals of paper jam and 1-5 on the right then explain change in ink cartridges). then about half an inch South of the illustration of the number 5 on the lip, is a plastic stand. six inches to the left is an another then 6 inches to the left, under the number of the illustration 2 (remove the paper jam) is a third support. Unscrew using your nails. Flip it up just like the hood of the car, and eten on the main top of the printer, keep the flat wire which is connected to the frame of the control panel (if the flat wire jumped because you got too loud, then simply insert it in when you go back).

  (8) then unscrew the 3 long silver screws that are located under the Panel you just popped off the coast. There is 1 on the left and 2 on the side rightish. mix 'em on the paper plate.

  (9) now that all the screws are removed, take the Panel front and partially pop it back together.

  (10) then take all over (the part with the small illustrations and lift like a hood of car, ONLY THIS TIME OPEN IT LEFT and he balanced on the edge of the printer, to lean over towards the wall or an obstacle on your left.) MAKE SURE NOT TO PULL ON THE STRIP OF COLORFUL SON FRUITS LEFT AND ALSO THE FLAT BLACK WIRE CONNECTING PART SCANNING FOR THE MAIN OF THE PRINTER PART.

  (11) then take the pliers to tapered spout and remove the 2 silver tension springs located behind the printer cartridges. Pay attention to where they were attached so you remember where they go during the Assembly. take a picture with your phone if you have to, or simply re - understand it like I did. mix 'em on the paper plate.

  (12) then disconnect the 2 large flat wire and 1 small flatwire attached to the back of the ink cart. take a picture or can remember like I did. I guess bad things can happen if you reverse the on re-Assembly. Pick up the phone and take a picture of quik to be sure.

  (13) now remove the cart ink, cartridges and all, by lifting the front first.  Be careful of the transparent tape little there that moves the carriage from left to right and vice versa. you don't want to damage this little guy. now take the transport to your paper plate. not some ink or accidentally get it on your fingers without knowing or will make a mess.

  (14) remove the ink cartridges and put them on the paper plate, side ink to avoid a mess, these things sometimes drip. put the plate side. its time to clean the print heads.

  (15) then go to the sink, to the distribution of empty ink and turn on the hot water and then let the transport of empty ink sitting there with the water mainly through the clogged color screen (inspect and make you is not a small rubber seal surrounding the small screen, if there is do not waste it. I didn't look too closely and I don't think that hp has them but I have a few other printers). It will stain the sink but water ink he comes out to be sure. notice there is also a small circuit attached to it. don't bang it upward but getting wet does not matter.

  (16) continue to do this until the water is clear.

  (17) then use your finger and rub the screen gently with your finger and then rinse it, taking ink until the water is clear. This continues until there is no more ink and screens are clean. do it for all the colors just for good measures. the color of problem that would not print, you'll notice takes longer to clean than the other colors.

  (18) now look on the lower side of the transport. these strange looking things are the leaders. Rinse in hot water and dry them with paper towels. then flip it over and the breath on the side of the screen again. also between the screenside and heads (on the side of the transport) is an opening which is also probably gunked up. It blows with water too. Then, turn it over and wipe the head again. Repeat this step until no fades or until you are sick and tired.

  (19) shake, then use paper towels to dry the entire unit. Make sure that the device is dry.  especially inside the female plugs. blow inside or out dry hair and dry gently. do not stand there and melt the but with the blow dryer. but the sooner it dries less your ink cartridges, sitting on the paper plate will dry out. the custom of the ink dry quickly just do not take a NAP or go on a date until you're back with part of the ink.

  (20) now you have finished cleaning the heads and probably don't need to do it again for the length of time, it was because you bought the printer. and just as a roadtrip you used a map to navigate, you will use these instructions in reverse for reassembly. but keep in mind when re - insert the 3 flatwires that you disconnected from the back of the ink cart, make sure you that have small metal contact on the flatwires points (side male) inserted so they affect small metal contact points on the caps of transport (feminine) side. ALSO BE VERY CAREFUL NOT TO DAMAGE BLACK FLATWIRE CONNECTING THE SCANNER PART PART HAND PRINTER. THERE IS A SMALL GROOVE IN THE PLASTIC WHERE IT CAN SIT TO GUARANTEE NO CRIMPAGE. USE IT. also make sure that the 2 hinges to the scanner portion/cover are placed correctly before the fixing of the top with the 6 black screws.

  now raise the printer and reinstall the ink cartridges. then plug in the appliance and turn it on.  If you get notifications on the control panel telling the custom of transport move, then open the trunk and remove the ink cartridges, hustles and ensure that transport is installed and that the tensioner springs are in place correctly. Repeat the operation if necessary until notifications go away or just do a test print and do not take into account the notification if you messed with it a few times already. That's what happened to me and the notification went his own. Once its online, open the hp utility and press the button "clean the heads. do 2 x in a row and you will be in style, with colors extremely rich and "BOLD" and Yes, printed black raven.

  p. s.

  You can always take your aggression out with tree limb loppers or Tin shears like I did and cut the plastic Center keeps you to transport directly outside. Completely eliminates the disassembly and reassembly. Make sure you DO NOT CUT THE TRANSPARENT TAPE THAT MOVES BACK AND FORTH TRANSPORT. This way the next time it happens it takes you only 10 minutes before you are upward and printing.

  Enjoy!  -Porf

• How can I print from my galaxy s4 and hp officejet 150 mobile printer all in one

  I have connected my 150 mobile all-in-one hp officejet to my lap top.  Now, I want to connect my printer on my galaxy s4 Bluetooth smartphone, but the phone is new and I'm not sure the next steps.  Help.

  Hi John. Officejet 150 mobile as you know is a Bluetooth printer.
  
  HP does not offer an impression of the Android operating system solution Bluetooth:
  
  See "Printing Bluetooth with a mobile device":
  
  http://support.HP.com/us-en/document/c03143772
  
  
  
  There are, however, 3 3rd Party Apps that can work for you. Do not forget that they are not officially approved by HP and not guaranteed.
  
  user "jbarsgixxer" of this post said "printershare" worked for him:
  
  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/setup-OfficeJet-mobile-100-and-150-via-Bluetooth/TD-p/706761

• HP Officejet 5610: Problem with cartridges

  At the moment I can't print more. Whenever the 'Problem with cartridge' message appears. I use no original HP cartridges. Mid October HP provided for a large number of models of an update to resolve this issue. I have not found a link for my model (Officejet 5610). What can I do?

  Thank you.

  Hello @ErikDC

  Thank you for showing your interest in the HP Forums! I see that you are getting the error 'Problem with cartridge' with Non HP cartridges. I would like to help.

  Your printer has not been affected by this update: dedicated to experience better impression.

  You can try these steps, but no guarantee they will work with the cartridges Non-HP: 'Incorrect print cartridge' or 'Print Cartridge problem' message on the Panel of printer for HP Officejet 5600 all-in - One Printer Series.

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers! Good luck!

• HP OfficeJet 5742: enlarge print

  How can I enlarge print when copying

  @JABBERWOCKY56

  You cannot directly control only 'the characters' size when you use the COPY; You can use RESIZE to increase the size of the entire document > > don't forget the paper on which you copy the original is large enough to "contain" the resized data.

  The User Guide explains the procedure in Chapter 5, page 40.

  Additional information is provided in this paper How - to's:

  Copy of Documents or Photos with a HP ENVY 5640 5660, 7640 e - all - in - one, HP Officejet 5740 and 8040 e - all-in - One Printer Series

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Cannot fax Officejet Pro 8500 A909g; was recently sold by Verizon to switch to FIOS digital telephony

  Hello

  Recently switched to FIOS digital voice service. I have a HP Officejet Pro 8500 A909g. Y at - it a patch or other difficulty that I can use to send a fax? Receives errors in communication since going digital.

  Thank you

  Michael

  Fax is STILL an analog service, he may be able to work for DSL or VOIP, but it is never a guarantee. Unfortunately, there are no fixes, updated or newer models that will change this.

  You can try to contact Verizon to see if they have filters or suggestions, but it can never work with a digital line.

  I know it's frustrating, but there is not much that can be done. You can watch are E-fax to the square or a secondary analog line.

• OfficeJet Pro 6830: Officejet Pro 6830 display is disabled

  The LCD of my Pro Officejet 6830 is off and does not start.  Looks like the touch screen works - at least I hear tones click when I touch the screen, but it is off and I can't do any copy or scan function since I can't find where to touch.

  Printing from PC on the network works fine and the poster printer printer web server is in good condition.

  What will do about it?

  The support page shows that the guarantee for this printer is until 18 November 2015 and only 2 days left from today.

  Talked to the technician the cat and the identified material-the screen backlight LCD is broken.  Replacement order is underway.  Thank you.

• OfficeJet 5740: Scan to network folder

  I can't scan to a network with my Officejet 5740 folder as I do with the 8620. This is a limitation of the equipment and in this case when I remove this printer those that support this feature.

  Hi @Talerian,

  I studied your question on the scan to a folder in network on the Officejet 5740 - and I am sad to say that it does support these scan methods:

  • Scanning to a computer
  • Scan to a memory (7640 ENVY and Officejet 5740 and 8040 only) device
  • Scan directly to e-mail (only wireless Internet connections)

  You can see how to use these document: scanning to a computer, Email or device memory

  Scanning to a network folder is an advanced scan option and is only available on the top models of the end (like your 8620).

  Here I had better news, depending on where you bought the device, you may be able to exchange but I don't know about you - you should check with them.

  Thank you