HP Officejet 8500 a e-all-in-one: Officejet 8500 A progressively less black ink prints

Similar Questions

• Re: HP Officejet Pro 8500 problem has with black ink printing

  I have an Officejet Pro 8500 a. I've done a clean print head.  I have a lot of HP black ink cartridges.  Print head State says black is good.  I get hardly any black printing.  All the colors are fine.  Help!

  Hi @di43

  I appreciate the troubleshooting you have already completed to solve the problem. I understand that the black ink not print as expected. Even if you already have some of the steps in the following document, I suggest you fill all the solutions advocated in the order they are presented, even if it means something you already tried; Printer prints a blank Page is not printing black or color of ink for the printer series e-all-in-one-HP Officejet Pro 8500.

  I hope this helps.

• HP Officejet Pro 8500 has problem with black ink printing

  I have an Officejet Pro 8500 a printer. When I print documents, it will not print anything in black ink. The colors work very well, but just black will not print. The printer says that the black ink cartridge has plenty of ink, and when I shake it, I can say that there is something in there. So, I don't think it's a question of black ink out. Is there a chance that something is blocking the ink out? Any patches for this in addition to the purchase of a new ink cartridge?

  Document here can help solve the black is not printing on your HP Officejet Pro 8500 has.

• All-in-one Photosmart HP 7510: Photosmart 7510 - black ink cartridge print does not, but the tests are very well

  All the test prints are very good.  I have cleaned the print heads, broken cartridges.  I just replaced all the yesterday.

  Today, I can't print black.  The documents are great dimmed or blank pages come out.  I use a MacBook 2007, 10.6.8.  What else do you need to know?

  Thanks in advance!

  Hey @jas493,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I see you have a recurring problem of print quality with your HP Photosmart 7510 e-all-in-one printer.  I want to help you with this.

  What you describe, it seems that you tried all HP recommended troubleshooting steps.  Fortunately, given that your printer has a removable printhead, there are some other steps you can take to address the issue:

  Check the status of print head warranty

   

• Cartridge, HP 920 XL: Wireless HP Officejet 6000, the problem of black ink printer

  I have a HP Officejet 6000 wireless printer.  It's 2nd HP 920 XL cartridge that has not worked.  It does not show that it is empty, but it will not be printed.  Our school cannot afford to replace these at this rate.  Please let me know what to do to make this work correctly.

  I removed the printer as my default so that I could use another printer.  When I ran the program again to check for problems, the guest asked me to add the printer returned as default.   When I reconnected it the printer as long as my default, I tested the printer and it worked.  Don't know why remove and then add back in the set, but he did.

• my HP officejet pro 8000 is leaking black ink

  OfficeJet pro 8000 is leaking black ink on the right side - in the back.  I have windows 7, no error message.  the print heads is the problem?

  I'll need a little more information to help. He flees outside of the printer ink? Or the ink is pooling in the back inside the printer? Have you recently changed the cartridge? Is this a real HP black cartridge not recharged? Have you looked at the tubes/cables that provide the ink in the print head? Are they bent or curved or not?

• HP Officejet 5746 e-all-in-one: HOW to connect android phone randomly to print the data of the phone?

  I have Macbook & Office XP connected to the printer (HP Officejet 5746 e-all-in-one printer) necessary to connect Random cell phones to print the data.  All directions?  TIA Doc

  You need a wireless setup to print from Android phones.

  Please see this link for mobile printing options available:

  http://www.HP.com/go/mobileprinting/

  WyreNut

• HP 5740 Officejet all-in-one: fax will transmit well if the ink level is low

  Can fax you on HP Officejet 5740 all-in-one when ink levels are low with a good result?

  Hello

  Ink level low don't effect function fax, BUT if a level of ink is exhausted/empty you cannot use the fax because the printer stops during warm-up.

  Kind regards.

• HP all-in - One PC 19-2113w 19: white/black screen after upgrading RAM

  Hello

  So I have upgraded RAM using 2 x 4 GB SODIMM DDR3 Corsair 1600 Mhz, after installing the PC boots but screen is white/black

  steps to follow:

  1. I tried with 1 socket by using only a RAM, screen black

  2. I tried with 2 socket using RAM only one with the same RAM step 1, screen black

  3. I tried step 1 and 2 using the other RAM, screen black

  now here it gets interesting

  4 tried 1 socket using Original/factory RAM, screen black

  5 tried 2 socket using Original/factory RAM, screen black

  6. tried without any RAM at all, looks like a lack of RAM, screen black

  Now, to each measure adopted, I must say that the screen sound not only not showing things, but its totally black as it does at all, until the system starts normally. !

  Is it Possible the upgrade of RAM affect the screen? or maybe when I was replacing the RAM I hit some conecting by cable to screen or something?

  HP 19 all-in-ONE PC

  Product No.G4B06AA #ABA

  Model n ° 19-2113w

  10 64-bit Windows

  Update

  Removed the battery and hold the power for 30 sec button (BIOS reset if I'm not mistaken?) now it works with the orginal of RAM so I guess my new RAM that's the problem!

• L7480 all-in-One sends white sheet 2 minutes after the print job.

  Since the upgrade to Maverick on my imac 21 "new, my HP L7480 all-in-One emits a single sheet of blank paper, 2 minutes after each print job.

  When a print job has finnished, the screen says that it is still printing. Pressing cancel ejects a sheet blank, but if left alone, it ejects a blank sheet automatically after 2 minutes.

  I can't find a driver for this printer that runs on iOS 10.9.

  Hello

  Here is the HP Print Driver Update critical to deal with printing a foreign page.

  Click on this link and download the patch. > Update Released: 2013-12-03

  Thank you for your patience.

• HP deskjet all-in-one 2545: Troubleshooting Wireless direct with HP2545 with printer all in one

  I want to use my printer wirelessly without router (via direct wireless), but there is no work, or he always says this printer is offline every time when I was trying to make my the HP2545 while one use by direct wireless.  IAM using a pc with windows 7 64 bit I have installed the latest software for 2545 all-in-one of the net to the PC already, connected via USB and in this case printed successfully. (it also works through classic wireless)   The printer appears as a device with wireless on the PC and I can log in, however, (with unplugged USB) when Iam printing, the printer shows as offline and work never reached the printer. But if I plug in the USB cable it will print. I already found in the bottom right corner my SSID of my printer, put the correct password and it writes me that priter is already connected but nevertheless the printer does not work, is always offline... I tried all the known methods (in classic seting place... by start-> all programs-> HP-> HP deskjet 2545 series-> setting up the printer and the software and tried to convert the USB to connect wireless) , but without any positive result... what iam doing wrong? why it does not work on my pc via direct wireless table? on my second laptop it I have win 7 32 bit and everything works great also through the direct wireless... it's very strange... Why this function works on my laptop but on my table pc not despite the fact that connected the printer in the lower right corner...

  Although no one responded to my problem, thank you when, I already solve the problem! It was such a success s bull and I didn't know... I had only just connected and linked to my home PC, my network card with my wireless card with the network address and ola which was the cause which has blocked my direct function wireless printer, now everything works well,!

• HP psc 1215 all-in-one: I accidentally reset the settings to the printer on my MAC, how can I re - install my printer

  Hello my printer is offline so I was trying to remove and add it again, however I accidentally reset printers 'recorded' and he's completely lost. How to reconnect it? I am connected to my printer with a USB cable. My computer is a MAC and psc1215 all-in-one printer. Thank you.

  Hey there @gucuk, welcome to the Forums of HP

  I came across your post about needing help to install your PSC 1215 turn it on for your Mac running 10.10. As there are has no comprehensive software features or drivers available for this printer on 10.10, you'll need to install the printer by an update from Apple.

  Click this link for instructions: installation of a Mac printer driver using Apple Software Update

  To testify of my attempt to help you today, click the thumb below. Click on the "accept as a Solution" If the problem has been resolved it please and thank you!

  If there are problems, let me know and I'll do my best to help.

• Hp5520 all-in-one: Hp5520 need to reset password every time print set up wizard

  3 weeks of holiday worked very well recognize now iPhone, iPad or Mac laptop. Says it is connected but can print only when I go to the wizard set up set password. HP 5520 all-in-one

  Hey @A-B,.

  I understand that you must run the Wireless Setup Wizard and enter your wireless password to establish a connection when you try to print from your Apple to your HP Photosmart 5520 devices e-all-in-one printer. I would like to help you to solve this problem today. Because the printer shows 'connected' but fails to print if you run the Wireless Setup Wizard, the problem you are experiencing is most likely in the router itself. When you have a wireless printer is really no area gray: it either works or it doesn't. If the printer fails to connect wireless, the wireless card may be damaged. If the printer connects wireless (even if it is intermittent) the wireless card works. Because your connection seems to be intermittent the router can be see your printer as a threat and intermittently block printing and scanning wireless two-way communication. That being said, there are a few troubleshooting steps that we can attempt to create a more stable and reliable wireless between the printer and Apple devices.

  Powercycle router:

  The next time the Wi - Fi connection problem occurs, do not run the Wireless Setup Wizard on your printer. Instead, you're going to have to powercycle your router. This step will also prove with certainty at 100% if your router is the origin of this conflict of connectivity. If your printer is working well after the powercycle, then the router is the cause of the connectivity problem.

  1. Start by unplugging the power cable to your router
  2. Once your router is unplugged, turn your printer off
  3. Then, shut down your computer
  4. After 30 seconds to 1 minute, plug your router back in
  5. Then, turn on your printer
  6. Turn on the computer

  After a few moments, your internet connection will return. Please check on your Mac you are able to navigate to Web sites. Once the internet is to answer, test print. If printing works fine now continue to use your printer as the question can not return.

  If the question comes up, ports and settings will be verified on your router.

  • Ports to open and settings to adjust the router:

  If you don't know how to check the ports and parameters listed below, you may need to talk with the manufacturer of your router for assistance.

  Ports to open:

  • The incoming Ports (UDP): 80, 137, 138, 161, 427, 44
  • Coming out of Ports (TCP): 137, 139, 427, 5222, 5223, 9100, 9220, 9500

  Parameters to be set:

  • MAC filtering must be OFF
  • Firmware on router must be updated
  • Firewall on the router may need to be OFF for the test
  • The multicast must be turned on
  • Hello must be activated
  • If you use a dual band router, make sure you printer and devices are connected to the 2 ghz band. Printers are not supported on connections to 5 ghz

  After made the settings of the router, please test wireless printing and scanning to confirm that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. If you feel that the steps I have provided solved this problem please mark my post as a Solution for other users on the Forums of HP Support can easily find these steps. Good luck!

• 2540 cartridge error HP all-in-one office under windows 8 will not be printed

  My HP deskjet 2540 all-in-one printer will be printed not in windows 8. pls help.

  Hello

  Please see my response to your other thread:
  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/HP-DeskJet-2540-in-Windows-8-not-printing/m-p/3611251/highlight/true#M129063

  Thank you

• HP Photosmart all-in-one is showing offline on PC & online on printer & install more than once.

  • My smart Photo printer all-in-one HP give me 2 problems, one is listed as the question for help several times.
  • It is when I add the printer & PC discovers that she, it will print the 1st time that show offline, although showing online on the wireless printer.
  • I wanted to try to change the IP address as suggested, but don't know how to do this.
  • In the second place, he moved more than once on my PC?
  • It lasts for a long time, I have a warranty & can share the printer, but I don't think that something is wrong with the printer. Thank you

  Hello

  See the Article and follow the steps

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02221706&cc=us&LC=en&DLC=en&product=1141647&tmp_track_link=ot_search#N4724