HP officejet 8600 and the screen went too dark to see the control screen.
Is it possible to reset the printer back to the default settings (do not know if it is a screen problem)
Hi tomkaighin,
You will need to contact our technical support at 800-474-6836 for this hardware issue. If you do not live in the United States / Canada region please click the link below to get help from your region number.
http://www.HP.com/cgi-bin/hpsupport/index.pl
Tags: HP Printers
Similar Questions
-
I have a new Epson R2000 and my impressions are too dark. How can I get WYSIWYG?
I disabled the color management on the R2000 and 10 elements to optimize for prints. I try to get WYSIWYG. It is complicated by a new LG Flatron IPS235 monitor. It is supposed to have the best calibrated factory of color and FRY Electronics said that it would be the color of the true range and complete. I tried to change the mode sRGB, photo mode and user mode and prints are still too dark. I'd appreciate any help I can get. I'm a scrapbooking working on pictures of my world travel bucket list. At the rate I'm going, I will kick the bucket before I get printed photos. Thank you!
If there is a "16-bit" option in the Epson controls, try turning it off.
Apparently to allow this control breaks the mangement of the color codes in the Epson driver.
Let Photoshop control color is more accurate, but sometimes encounters bugs in code printer (such as the switch from 16-bit) driver.
Let the printer color control is easier, but much less precise and leaves your images subject to some secret sauce of the printer driver wants to apply to them (which can vary between images!).
-
How can I move these indicator and the control to another page?
How can I move these indicator and the control to another page? I page Kontrol and those on Installningar page, move!
Or I want to hide them Kontrol page, how can I do
Thank you
Hi q8.
move: select the controls, move them out of the container tab, drag them into the appropriate page of the tab container
Hide: Terminal controls (!) right click, select "hide"...
-
How to unlock objects in spread? My can´t objects be moved (stand picturesboxes and text boxes), and the control/opt/L command is not available. Anyone know how to do? Maria
Try trashing preferences. See replace your preferences
And please turn off or remove the autoquote bey email for the answer. Thank you.
-
Lost all the podcasts of the iphone and itunes - backup went too - HELP!
For some reason, all my podcasts FROM itunes and my iphone.
Backup went too.
Is it possible that I can access my itunes account and somehow to find the list of podcasts that I was subbed to so I can resub?
Thank you
See the empty/corrupted after upgrade/crash iTunes library.
TT2
-
HP OfficeJet 8600 and Custom paper sizes
I have a HP OfficeJet 8600 for 2 years now, and I've never had a problem with it until today.
I bought a few cards with inserts that I can print on, however, because it is a custom size, I can't print on it. The printer has no option to set a custom paper size.
So, I do the obvious thing and Google a solution. The firmware update I read... no luck. The update utility can't find my printer on the network even if I print it to 3 different computers, and I can browse his IP in Chrome and check the Web page.
Try a different driver (Win 64-bit 8.1)... the steps that I follow do not work, and when I get them to work, there is nothing different.
I tried to do on my MacBook Pro too, but I can not do anything there either.
Totally ridiculous, which releases a product with this MASSIVE floor!
I am very angry that now I have to put it back write more than 100 of these cards
So I found out how to check the updates of the printer itself, and I have updated firmware, so that rules out.
-
installed a HP Officejet 8600 + and I can't install print drivers, fax, etc.
I just installed an Officejet HP 8600 + and I can't install print drivers, fax, etc.
I tried to download the drivers, but couldn't do it. I have not signed on Microsoft technical support at the time. Someone had this problem and what did you do to solve the problem?
Thank you.Moved to windows
DC
Since it is an HP printer, your best bet is to contact them regarding the drivers etc.
-
Connectivity with the hp officejet 4500 and the imac issues
Please tell us how to connect the printer hp officejet 4500 to the imac so that it prints laptop. I tried everything and failed. Thank you
Hi Camy234
According to what officejet 4500 HP printer you have, you can view the following link to download the installation software from the HP Officejet 4500 to your iMac
HP Officejet 4500 all-in-One printer - drivers G510a & downloads
HP Officejet 4500 all-in-One Printer - drivers G510g & downloads
If you use Mac OS X 10.8, you can actually install the software via Apple Software Update using the guide below
V10.8 OS X Lion mountain: installing and using the printer on a Mac with the Mountain Lion
I hope it helps
-
OfficeJet 8600, reverse the order of characters, Windows 7
I am running windows 7 64 bit, I don't find any option to print in reverse order. I want to print last page 1 and the 1st last page, there is thus in order after printing...
.. under Printer preferences or properties of the printer, I tried all the options open and see nothing on the reverse print order
Hi Jamin21,
You need to change the order of pages. I would like to know if it works?
-
I need power find/use Java and the control panel Java to use some software open source.
There is no way to get to the Java Control Panel. Where is it, and why you did so difficult to use computers?
If you have not downloaded java, you will need to download, install it. It can only be downloaded, installed and run desktop t5he - not from the beginning. Then you should find it in the control panel. Hope this helps and if you need another post to help and we will be happy to help you.
The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it is
employees, or any other Member of this forum.
"When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir
-
This is the message I get when trying to open a file or trying to access the control panel
Hi NANCYPERRY,
See the article after some troubleshooting:
http://support.Microsoft.com/kb/812340
I hope this helps!
-
OfficeJet 8600 so the appearance of horizontal bands
I use cartridges new but always horizontal bands. Maybe I should clean anything? How?
It would be a print quality problem that arose in this printer. There is a document located here, with steps to help solve print quality problems.
I hope this helps.
-
A company called S.M.A.R.T. somehow entered into my computer and continually scanned my hard drive. I was able to get rid of that after many emails for them. After that they took out of my computer, I had my office. There were once beautiful images in the background with all my many icons showing. Now all I have is a blank screen with only a few icons that I was able to resurrect. They are: Recycle Bin, Panel Sontrol and new Document Microsoft Word Document template. I am more able to access one of my documents. There are documents that I need to work on but cannot do it at all. Is there a solution to this problem? I'm desperate! Thank you.
Your computer is infected with the rogue malware. Rogue malware is software that installs on your computer. He tries to scare you into buying the product informing you of the wrong issues with your hard drive.
First thing NOT to do is to remove all temporary files. This rogue often hides your files. It is a program that can view your files, but you must first get rid of the malware.
Restart your computer in safe mode with network. Click HERE, download, install, update and perform a full scan with Malwarebytes.
Once the scan is complete, please let me know what has been detected. If you have trouble running Malwarebytes click HERE, download Rkill and run. Rkill is NOT a malware removal tool. Simply, it detects the malicious processes that are running on your computer and it kills to run malwarebytes and scan your computer.
-
Delete computer window menu bars and the controls at the top of the my computer window?
I would like to reduce the amount of screen real estate that my Workstation window normally takes on my computer screen. I mean, it's just to show the window frame naked Workstation when running, except when I need controls, and then I can bring them to the top. That would eliminate all of this (usually unused) space at the top of the window workstation that has the Workstation menu bar, drop-down menus and so on, for the virtual computer control and work stations. Kind of a way of reducing real estate, as many Windows applications.
Is it possible to do this? I looked and did not see anything about it, nor anyone discussing this (which may mean that I'm the only person in the world who wants to do that, but I doubt smile).
Thanks for your help.
-Roger
For Windows hosts, right-click on VMware Workstation icon in the upper left corner of the title bar (or right click on the entry of the taskbar) and choose "Hide Controls".
-
Satellite A200-1VP - Trackpad and the control volume
Hello
for the first time posting here so apologies in advance if I posted this topic in the wrong place or have not included all relevant information.
My question is about a Satellite A200-1VP I bought recently from a friend. Model number PSAE6E-08D02YEN. The laptop has been completely annihilated and installed Windows 7 Ultimate before being redeemed.
This seems to have brought the track pad and volume control to stop working.
Are there drivers available that I could try to help to solve this problem?Thanks in advance.
Hello
I checked on http://www.toshiba.eu/innovation/download_drivers_bios.jsp Toshiba download page, and as I can see it, your machine is fully supported for Win7 32 bit, so you need to do is install all available drivers, tools and utilities.
What version of operating system are you using (32 or 64 bit)?
You have installed all the drivers?
Maybe you are looking for
-
HP Pavilion g series: administrator password to the power required for laptop
Hello My phone requires me to enter a password administrator power. After three failed attempts, she gives me with the code: 67240200. Can you help me please? Thank you
-
Segfault LabVIEW 8.2 on Ubuntu Linux 8.10 64-bit
Hi, I just upgraded my Ubuntu 8.10 Linux box. And then, I found that LabVIEW 8.2 cannot work on this, but it worked fine on Ubuntu 8.04. Does anyone have the same problem? Are there solutions? See you soon,. Forrest
-
Hallo,in my page, when the user clicks on a button, I'have run an operation and in particular generate a code PIN and password that the user must not not know/interception.The STEM must be kept "secretly" in the comic book.I created a function to gen
-
Photos retouched not showing in Indesign CC PDF
I created a page layout in Indesign, and I placed an image of a soldier in uniform. I can see in my PDF, but my client says he can't in his when I e-mail. So I sent an email - yup - soldier not there and myself.I'm trying to figure out what I did wro
-
Signature does not save with document
After the entry of my signature and save the document, when I reopen it the document my signature disappeared. Any help appreciated as it used to work before I updated adobe reader software?