HP officejet j3680 bad language unable to find preferences

Similar Questions

• How can I fix this "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." Error if please restart and try again. » ?

  I'm trying to install Microsoft FreeLancer on Windows 7 64 bit Home Premium edition (according to WinVer: Version 6.1, build 6701, Service Pack 1).

  After inserting the DVD in the drive and run "Setup.exe", I am invited by the UAC to elevate permissions - who I am agreement - then the following error message appears: "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." If please restart and try again. »

  The only valid technote, I found the issue was http://support.microsoft.com/kb/258496. The below is the list of the things that I tried after reading this technote - but no avail.

  • Of course, I tried to restart.
  • I checked the DVD is in good condition, even with regard to the attempts to install from the disc to a friend and even went up to compare the MD5 of all files on two DVDs, the checksums match.
  • I tried using the compatibility mode for XP, although according to the report of another user on the statements of the Windows Compatibility Center that this should not be necessary.
  • I ran a full "chkdsk" (i.e. one scheduled for after a reboot, rebooted) and chkdsk reported no error.
  • I deleted all files "di - use ' %TEMP%, immediately after the restart and before you run setup.exe.
  • I've looked at this the EMET tool had an exemption for 'setup.exe' and my tool anti-virus was disabled before installation.

  Everything I try seems to have no effect on the resolution of this problem.

  Can anyone suggest any possible causes of--and, ideally, solutions to-this issue?

  Kind regards

  Alex.

  ... "Step 1: perform the clean boot to verify if it's a software conflict matter. '...

  -Tried but not given to impact.

  ... "Step 2: System File Checker tool"...

  -Tried but not given to impact.

  ... "I would have you check the same DVD on another computer and check if it works. '...

  -The only other machine that I use Ubuntu. My other half uses only his Mac.

  I managed to work around this problem by using the following workaround solution:

  I installed Freelancer CD on a Windows XP virtual machine running in VMWare Workstation. I then moved the installation directory (C:\Program Files\FreeLancer) off the coast of the virtual machine on my Windows 7 computer in (C:\Program Files (x 86) \FreeLancer).

  The game seems to work fine as long as it is run with administrative privileges (that is, the freelancer.exe running). Without administrator rights, the games is never recorded. With them, they are registered under "C:\Program Files (x 86) \FreeLancer\EXE\Accts\SinglePlayer" successfully.

• I need serious help please... We do translations of textbooks, I searched an excessive type function but have been unable to find, we are working in indesign CS 5. It takes allot of time to delete the text and type in the new language.

  I need serious help please... We do translations of textbooks, I searched an excessive type function but have been unable to find, we are working in indesign CS 5. It takes allot of time to delete the text and type in the new language.

  Argh it's frustrating! I never noticed that the key was not working in InDesign.

  A bit of research and it turns out that the MS Office has this as an option in their software. But I can't find an option in the InDesign preferences to make it work.

  However, somethings do not appear in the shortcuts and preferences and are hidden triggers in InDesign that are accessible via a script.

  I'm not saying that it is possible to activate the button insert by using a script, but it is plausible that he can be activated.

  Maybe ask on the forum script? Scripting InDesign

  I know that this may be a possibility as with InDesign prior to export PDF documents interactive versions, there was previously no way to export PDFs interactive as unique pages if the gaps of.

  But the option to toggle this setting was scriptable.

• OfficeJet J3680, cannot log on to the appliance

  OfficeJet J3680, connected by USB to Mac Mini with OSX 10.9.5.

  It worked very well for a long time, but now scanning is broken.  Print still works fine.  All features (printing and scanning) works fine if I connect the USB cable to my MacBook Pro with the same operating system.

  Specifically, I get the error message "unable to log on to the device.  This happens for all types of access attempt (preview, Capture of Image, system preferences > printers and Scanners > Scanner > Scanner open...)

  I tried different solutions, up to and including a complete uninstall and reinstall, with restarting the computer and the printer.

  Update Software Apple (in the App Store) indicates that I have successfully installed HP Printer Software Update Version 3.0.

  Printing SYSTEM has been reset several times.

  Clues?  It's super frustrating that it works on my laptop, but not the desktop computer (where there is meant to be fixed.)

  Hi James!

  Thanks for getting back to me, and Yes you are right and forgive dominant that the printer works with other devices.

  Here are a few suggestions more:

  1. Remove the first printer driver by following these steps: Sunshyn2005: FRUSTRATED! HP 6700 scanning feature does not not with my MAC
  2. Complete a manual uninstall then: Sunshyn2005: Re: definition of Scan
  3. Reinstall the driver v3.0: v3.0 of HP for OS X printer drivers
  4. If it still does not work, try to create another user account

  Hope you enjoy your Monday

• OfficeJet J3680, suddenly will not print. Blinking orange exclamation point, screen reads "cartridge error".

  Suddenly, my Officejet J3680 will not be printed.  Blinking orange exclamation point, screen reads "cartridge error".
  No troubleshooting of any help.  What should I do?

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP - OfficeJet J3680 - drivers - the value for your version of Windows
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3441026&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - OfficeJet J3680 - troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3441026&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why is-Visa Interactive Control unable to find or load the visa library

  I'm using LabVIEW 8.5.1.  I recently installed driver VISA tektronix to connect with one of their products.  That has proved to be a bad idea.  I've uninstalled it one then installed VISA460, but when I try to write a labVIEW driver that communicates via RS232 or USB, I get this error:

  LabVIEW: (Hex 0xBFFF009E) VISA or a library of code required by VISA impossible situated loaded.  This is usually due to a required driver is not installed on the system.
  =========================
  VISA: (Hex 0xBFFF009E) a code library required by VISA impossible located or loaded.

  When you try to run an interactive control Visa I get an error saying unable to find or load the visa library.  Is there anything else I need to download?  Any help would be great. Thank you.

  I had already done this, but had no luck.  However, I could be back up and running using Msiblast.  This is a great little program.  So, if anyone has problems in the future, simply download Msiblast and delete everything has VISA inside and then run the Setup program OR Visa.  Thanks for the help.

• I'm unable to find the missing drivers on my device manager.

  OT: Re: lack of pilots.

  Hello

  I'm unable to find the missing drivers on my device manager. A unknown device watch. Other shows, like in the storage controllers. I checked Windows update, but it does not find the missing drivers. I don't have the drivers on my CD.

  Please download and run the display driver and download a copy of the report he produced on your OneDrive. To obtain a report all drivers Select Edition, select all followed by file, save selected items.
  http://www.NirSoft.NET/utils/DriverView.html

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. The request for a copy of this file is additional to answer the question about the brand and the model. If the report is in one language other than English, please indicate the language.

  For assistance OneDrive see paragraph 9.3

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• My HP officejet J3680 is not configured for the fax. I want to just make a copy of a document.

  I use my J3680 to make quick copies.  I don't want to connect to the fax phone line or my computer.  I can't find my old manual.  I just want a casual copying.

  Hi Kate,.

  It seems that, you need the User Guide of HP Officejet J3680 all-in-One Printer.

  Refer to the following and download it.

  User guides for the range of all-in-one printers, HP Officejet J3680.

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&LC=en&product=3441026&

  I hope this helps.

• Error message - unable to find the proxy server - how can I solve this problem

  When I try to enter some sites I get the error message: unable to find the proxy server, Firefox is configured to use a proxy server that is not found. It happened all of a sudden and I don't know why or how I can fix it, it does not help that most help site are blocked. I'm using a Mac 10.5.8 and Firefox 15.

  Set not to use any proxy.

  Firefox> Preferences > Advanced > network > setting > don't score no proxy

• Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 firefox browser. You want to disable/remove the navigation bar. Pls Hlp

  Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 version of the Firefox browser.
  I want to disable/remove the navigation bar of the browser window, making the browser works like the kiosk mode.

  Help, please

  Thank you
  Vishal.

  your profile folder is a subfolder of C:\Documents and Settings\XXXXXXX\Application Data\Mozilla\Firefox\Profiles\ and something like < randomstring > .default label - folder chrome with the userChrome.css file must go in this folder .default < randomstring > .

• Lost icon of report of trusteer, unable to find an answer on the Web site here.

  I've just updated to Version 6 of Firefox, I lost the Trusteer report icon located on the tool bar, the same thing happened when I downloaded Version 5, I was hoping that my information was still available in my messages Inbox when I logged in Mozilla, but unfortunately he went, I searched the Web Trusteer site and I am unable to find anything.

  Trusteer Support technical report - https://support.mozilla.com/en-US/questions/862201

  We are pleased to inform you that a version of the report that supports Firefox 6 has been released and is now available for download in the following link:

  • http://download.Trusteer.com/NkuiAcruiKc/RapportSetup.exe

  If the report indicates that the version of the report that you are trying to install is older than the version already installed, please follow these instructions:

  • (1) choose uninstall report
  • (2) when you are prompted, select 'delete all user settings '. Please, assisted by the following image - http://consumers.trusteer.com/files/images/uninstall.jpg
  • (3) reinstall report from the link above

  Check and tell if its working.

• HP Officejet J3680 all-in-One: Officejet J3680 will install no software for Windows 10

  The complete software for the J3680 will not install on my new Acer Windows 10 PC (6 months). I don't have the codes error, but when undo them the installation process continues from referring to Windows 8 and I made sure that the software that I chose was supposed to be for Windows 10. I went through the entire process, including all the trouble shooting process, and yet it will not be installed. 3 hours ago and I'm not impressed. This same machine and software worked fine on my Windows 7 PC.

  Hi @rgslondon,

  Thank you for joining the HP Forums!

  I understand that your software HP Officejet J3680 will not install on Windows 10. And I'm happy to see it for you!

  Please, try the steps in this guide, "device installation failed" or "unknown device" message during Installation USB (Windows).

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• Satellite Pro L20 - I need a new screen and I am unable to find a part number

  Hi all

  My L20 Pro Satt needs a new screen and I am unable to find a screen with number of part corresponding to mine.

  Can anyone provide me with the other part numbers that would fit mine.

  Thank you

  I found only a display for a Satellite L25 Pro but I guess that the two devices are very similar and use the same part of the screen.
  The display part number is K000000620 and it s a 15 XGA 1024 x 768 display.
  http://www.screentekinc.com/Toshiba_Satellite_Pro_L25--15-inch--1024x768-XGA-laptop-LCD-screen.shtml

  You also can order the compatible display. You can contact the partner of service allowed in your country to order this part.
  But be aware that the display is one of the most expensive parts of laptop.

• Installed Windows 7 on my HP Compaq nw8440 but unable to find the drivers that only Vista drivers are ther

  I just install Window 7 Home Basic Edition as final Version was my HP Compaq nw8440 too slow. After installation, I am unable to find the drivers and all drivers available for Windows Vista. No driver VGA, No Finger Print etc. And the Internet is also working slowly well my connection giving the same speed. Please help me

  You are the very welcome.

  I do not take up that simple...

  Try the driver windows 7 for her at the link below and you will need the W7 software protect tools because I do not think the Vista software works.  Ditto for the quick launch buttons.

  These drivers have been extracted from the 6910p who was the first series HP business notebook, support for windows 7 and the one that follows in the line after the nc6400 (the 14.1 "model of your screen).

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-66699-1&prodTypeId=321957&prodSeriesId=1839152

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&taskId=135&swItem=ob-78740-1&mode=3

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-77198-1

  Paul

• Get error saying: a necessary file to your aol desktop software work properly (snmaster.idx) unable to find to fix this problem.

  Original title: installing the aol software

  I uninstalled some older versions of AOL, now I can not open aol. Get error saying: a necessary file to your aol desktop software work properly (snmaster.idx) unable to find to fix this problem. Please reinstall the desktop aol PFC snmaster.idx problem is I don't know how to install this software!  Help

  Hi Bruce,.

  Thanks for posting your question in the Microsoft Community Forum.

  Based on the information, you receive the error message error message to reinstall the AOL software to fix file snmaster.idx missing after uninstalling older versions of AOL.

  This problem may occur if some data for AOL Desktop Software files are not installed in the correct location.

  You can see the AOL support article to install the AOL desktop software.

  Install AOL Desktop software

  You can also consult the support AOL article and check if it helps.

  Message: SNMaster.idx is missing

  If the problem persists, you can get in touch with the support of AOL for further assistance.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.