HP officejet j4580 all-in-one will not print from the internet.
My officejet j4580 all-in-one printer does not print all that I try to print from the internet, or in microsoft word. I tried to reinstall, but it gets stuck at 94%, and it took almost 3 hours to get to this point. What can I do? My operating system is vista from microsoft.
Here are a couple of things to try. I would first start by download and run the Diagnostic Print utility. IF this isn't clear, then try the document on the internet printing problems.
See if one of these help.
Tags: HP Printers
I can print a worddoc in portrait & landscape very well. I can print a worksheet excel in portrait mode, but when I put it in landscape mode, it will print only one or two inches on the left side & is not in landscape format at all. I unintalled and reinstalled my software updates & printing. What can I do to fix this?
I would like to help. You can answer a few questions?
- When you did the re-install, you use a disc or a download from hp.com?
- If you print a printer status or self-assessment Test report, can you give me the a.) Product # and B.) Version of the firmware of the printer?
- If you shut down your computer (not a reset) and a Hard Reset as described in the following link, is there a change? Click here
- What is the operating system for your computer?
Does not print my desktop Hp Printer j3680 all in one! Help?
· try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer
Read the information above from Microsoft about fixing printer problems.
You can also track information to try to solve your problems of printer below
read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other
Solve printer problems
and read this microsoft tutorial too
This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
How to use this tutorial
For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.
I have just upgraded to Windows 7. I installed the HP update software/driver for my HP C6150 all-in-One. I can scan, but I cannot print. I can print a test page from the HP solution Center under the Toolbox settings/printers; However, it is not a full test page. I was also able to print an Extended Self Test diagnostic of the HP solution Center under the settings/printer Toolbox. When I try to print from anywhere else the printer icon appears, but it shows 0 pending work. Nothing happens, and the icon of the printer ends by goes. I've uninstalled and reinstalled the software/driver with no luck. I can't find a patch and update HP says there is no new update. All diagnostic tests, I'm saying that everything works correctly. Please help me.
I was able to remove the printer drivers by using a printer driver removal utility. The printer driver for Windows Vista and Windows 7 (I've upgraded to Windows 7) were apparently contradictory. I reinstalled the software/driver and everything is good. Thank you!
I tried to solve my problem of the printer for weeks. I think that the problem is in the region of ink cartridge. The following suggestions to remove the cartridges, I found that they cannot be deleted. There is a bar preventing deletion. I had this printer for a few years and have never had this happen. Anyone know if this is something that I can do or do I have to take this device to a repair shop?
Have you tried to leave the printer and unplug the power cable? Doing so can allow access to the cartridges manually moving the carriage to access area. If this does not work, the only option may be to take it to a repair shop. Although we have not all authorized repair facilities, you might consider a mum and pop shop local, or call us and we can see you get a discount for a newer model.
If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.
I hope this helps.
My HP Officejet 6500 E709n all-in-one will not print black. All other colors work very well. Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted. Print tests still not print black - other colors and images to print, but not text black or shades of black in images. Any suggestions on how to fix or what needs to be repaired? Thank you.
Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.
Hope this helps you with your problem.
My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine. I tried aligning the printheads and clean the print heads, but still does not work. Help!
Thank you. It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head? I will contact HP support. Thanks again for your help.
HP C4280 all-in-One will not print color or B & W photos on photo paper. Color and B & W photos on plain paper prints. It is used to print normally on all documents. No change, I am aware of cause this malfunction. Any suggestions?
Open your printers folder and right-click on the printer and review the printing preferences. Set the media media photo here and in the application you are printing from. When you say that it will not be printed on photographic support what do you mean... the page is white? the quality is bad?
My HP6210 all in one printer will not print from a computer that has Vista. My operating system is Windows. The printer worked fine with my old laptop that did not have Vista. However, as soon as I have my Phoenicia connected, which has Vista, it will not print. My computer doesn't work anymore so I need to use hers. What can I do to make it work? Thank you
Welcome to the HP Forums!
I noticed that your HP Officejet 6210 won't print from your Windows Vista computer. I am pleased to see that for you!
First of all, I would make sure that the full feature software and drivers are installed, by downloading it from this link: HP full feature software and drivers. Then I would run the HP print and Scan Doctor, to ensure that everything works.
Let's start with these steps and go from there!
I hope this helps!
"Please click the Thumbs up icon below to thank me for having responded."
Officejet 5610 all-in-one will print no one when it does print a map of 2 months ago
Officejet 5610 all-in-one will print no one when it does print a map of 2 months ago
Who is this? Do not print or print the old data?
Under what circumstances does the former print job print (for example, after restarting)?
Follow these steps:
Open a command prompt window (start > run > cmd > OK)
Type the following command and press ENTER after each line:
net stop spooler
del "% windir%\system32\spool\PRINTERS\*.*" [Y when prompted type]
net start spooler
My HP Photosmart C5180 all-in-One does not print black without be eliminated text or streaks in the text. Will print fine text color.
Have tried all the "patches" you list and much more. The printer prints fine on my old PC Windows XP and worked fine on my
new PC using Windows 7 until recently.
Please don't tell me to... Reinstall, download the new driver, install the new cartridge, clean align the print heads, different paper or go to 'solutions '... Etc... Etc. I HAVE ALREADY BEEN THERE AND DONE THAT!
Everything you "patches" end with 'the unit of service... " WHAT IN THE WORLD WHAT THAT MEANS!
This has been a nice printer for more than 5 years, but is somewhat glitch spoil me when using the BLACK INK?
Thanks for the reply, expecting not one, but what you say is all that we need to buy another printer if we did all the "fixes", etc... etc. you know that take a printer to a repair shop will cost more
then buy a new one.
It was stupid of saying me to check on the warraty of HP page when I already told you that the unit is 5 years old.
But don't thank you for the reply... even if it was a joke!
Recently had to wipe my hard drive and reinstall everything. I use Windows 7 (64-bit), and my all-in-one does not print anything from the computer.
I downloaded the latest driver for the 1315 all in one series (AIO_CDB_NonNet_Full_Win_WW_130_141.exe) from the Web site. After that several unsuccessful attempts installation, following the troubleshooting guide, I was finally able to have it installed, but it still does not print. It will scan and copy, but not reading as a printer.
It seems to be a problem with the computer and the printer communicate with each other. Have you tried another USB cable or port? Have you tried setting the printer wireless or network? If he works on the network, then the problem is with the USB cable or port. You are using a USB hub?
printer works fine until I printed out a spec sheet. 35 a customer through an attachment page.
now, the does not print from the computer. Everything else works fine. (copy, scan, fax)
Internet works. Reset the factory setting on the printer. Everything seems fine on the computer, but when I hit print
Welcome to the HP forums!
I read your post on how you can not print with your printer HP Laserjet MFP M127fw, on Windows Vista pro. I'm happy to help you with this printing problem!
How is the printer connected? Ethernet or USB?
In the meantime, please try our HP print and Scan Doctorand let me know what happens!
If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!
Hope to hear from you soon and thank you for posting!
My new printer will not print anything when I try to print selections as a route on a web page of travel.
Other features of the printer works k o such as print emails.
I have Windows 7 Professional 64 bit system.
"My new printer. »
For a newly installed printer, you may need to reset some hidden preferences, print.print_printer, in particular, for Firefox to recognize the new printer.
- See-> http://kb.mozillazine.org/Problems_printing_web_pages (see "Reset printer")
- See-> http://kb.mozillazine.org/About:config
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update if necessary:
- Plugin check-> http://www.mozilla.org/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
- Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox
I have two printers, exactly the same thing, 5530 want all-in-one. One is in Arizona where I live part-time and we're in Oregon where I live part-time. I stopped instant Oregon printer ink when I went to AZ last November. I use instant ink program to AZ while there but she stopped this week when I went to Oregon. I tried to restart instantly ink, got an email that it was successful, but can not get all documents to print from laptop to the printer. Yesterday that it said unable to connect to the server and I chatted for two hours with HP on how to solve the problem. It will print the web now compatible congratulations sheet, but if you ask the computer to print, it circles repeatedly and it seems to wake up the printer at all.
- If the printer is connected to your Mac via a USB cable, remove it.
- Close any programs you have open.
- Click the icon of your Apple system and print and Scan preferences.
- Hold down the CTRL key and click the icon of your printer on the left.
- Click on reset printing system.
If you removed the USB cable, connect. Otherwise:
- Click the more in the lower left corner.
- Select your printer from the list.
- In the box titled use select your printer in the list.
- If you have an option to choose a name or location for the printer, enter a name such as Oregon. This should help you and your Mac to make the difference between your two printers later.
- Click on Add.
Please let me know the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
Maybe you are looking for
There are two sets of attributes for, left, top, width, and height. For example, there IMG_ATTR_ROI_WIDTH vs IMG_ATTR_ACQWINDOW_WIDTH MG_ATTR_ROI_HEIGHT vs IMG_ATTR_ACQWINDOW_HEIGHT What are the differences between the KING and ACQWINDOW? Thank you.
I did the recovery on DVD when I bought this computer. Now I want to restore my computer to this day 1 point. Kindly guide me how I can do it. I saved all my data on external drive. I use windows Vista Home Premiuim Kind regards Dr. Jawad amani
Log cant administrator account and it is not removed is where I was logged in and then shut down my computer and then I could not connect more please help
Hi ,I have a few Questions reclassification Oracle Wallet:Q 1: How do I know the portfolio (which already created) autoLogin or auto_login_local.Q 2: If the portfolio is auto_login_local is it ok to move it to another host?Q 3: is it safe to change t
Now, before I get off, I will say that I am sure that the host I'm doing this on IS NOT on the HCL.(why I'm running old hardware?-c' is a community organization that I volunteer for which relies on hardware dontated)However, please read on.Updated an