HP Officejet Pro 8000 A809 will not connect wo USB port

I have a WiFi with a SSID wireless but I would like to change to a different SSID.  This requires a USB connection and my wii printer not connect to my computer with the USB cable.  I tried several cables and different USB ports,

Acctually.  If you know the IP address of the printer, you can enter in a web page and pull the top EWS of the printer (Embeded Web Server).  From the integrated Web server, you can change all settings on the new network printer wireless.  Hope that helps.

Tags: HP Printers

Similar Questions

  • OfficeJet Pro 8000 Wireless does not connect to my new Airport Extreme router

    I've owned my Officejet 8000 Wireless printer for about a year and had no problems with it.  However, my old wireless router wasn't fully compatible Mac so I couldn't fix it with a password.  I now need a secure network, so I bought an Apple Airport Extreme router in December.

    Last night, I installed the router and it works fine on my iMac, my laptop and my iPhone.

    However, tonight, I'm trying to implement Officejet Pro 8000 with no luck.  I searched the posts here for 3 hours and am not finding the help I need.  Based on the other posts, I read, I describe my situation below.

    I am trying to set up the printer in my iMac Intel with Mac OS 10.6.4

    I'm trying to set up the printer with the installation wizard HP I just install the printer software.

    On the first screen of the wizard, it tells me that my device is not configured (I agree)

    Then I ask him to set up a wireless network.

    When I get to the network selection page, both my network AND my network of comments (that I let my neighbor use) are on the list with the full signal strength.

    When I click on my network and then continue, the HP installation wizard hangs and I have to stop, he.

    When I click on my guest and then network continue, I get the message that my network is not within reach.  (FYI, the printer is 10 feet from the router).

    I tried to power on/off the printer, the router and the computer at all different stages of the process with no luck.

    For my Airport:

    My radio is set to the most compatible choice

    MAC access control is not enabled

    Everything is WPA2 security

    'Use wide channels' and "Create a closed network" is unchecked

    The channel is set to 11

    I'm happy to try the "Add client in the network" thing I've seen on other posts, but I don't think that I have a front panel of the printer where I can start the "WPS" (don't know what it is) process.   If I do, it is not obvious and not in the HP manual.

    My ISP is Comcast (cable internet).

    I'd really, really grateful for the help!  Please let me know what I forgot to include information, and I will be happy to provide it.

    Thank you!

    OK to reset the printing system again, he may be blocked.

  • My Officejet Pro 8000 A809 do not print, but there is no error message

    When I try to print on my Hp Officejet Pro 8000 from my Windows 7 laptop wireless, the laptop is of the view that printing took place. I get no error message. But nothing comes out of the printer. Sometimes this small error on the printer flashes, but because the laptop thinks everything is fine, I can't understand why. I've run the troubleshooter, who says he has no problems, and rebooted the printer and the computer more than once as well. My printer (HP Officejet 6500 a) wireless works fine. Does anyone have a suggestion?

    Thank you for your help.

    Kat

    Thank you for you a message.  My printer worked fine with my Windows 7 laptop as I upgraded from Vista in May.  This the first time this problem has occurred.  I have change a color ink cartridge in the morning that it has stopped working.  But, he continued to work for about 3 hours after the replacement of the cartridge, so I don't really think that's the problem.

    One of the tools of diagnosis HP can help: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=3760410#N686

  • HP Officejet Pro 8000 Wireless will not be printed with the iPhone 5 s

    This printer as wireless that I bought used printing with IPhone or iPad in 2011 because is not on the list of Air printing devices so I was told by HP to buy a new and as it was not equipped "Eprint" HP app which is there to deal with it will not work. I was talking to sales person to avoid paying, but I can't believe this. There are printers better but makes no cela a throw away. and who wants to buy a wireless printer that used to print wirelessly? Help!

    Hi Hank, there.

    Sorry to hear that you are having a rough go with the printer.

    With respect to the 8000 wireless, I guess you've got a newbie on the phone tech rep. I couldn't understand why they said there is no work around, because I was able to get the older printers with HP troubleshooting documents. Some so that might help:

    1. install the printer on your network (if it isn't already) the software of the printer for a wireless network connection

    2. download the HP Mobile E-Print app for iOS. It should still work with non-eprint printers: https://itunes.apple.com/ca/app/hp-eprint/id299531647?mt=8

    3 take a look at this video tutorial for tips on getting started: http://www.youtube.com/watch?v=l1z1pSC8WHI

    Hope this helps

  • OfficeJet Pro 8000 A809 loses wireless connectivity

    This printer is connected via USB to a PC running Windows HP Home and wireless to a Mac running OS 10.6.  The printer works with the Mac occasionally, but most of the time, I get a "printer offline" message on the Mac.  Sometimes power cycling the printer restore connectivity, but not always.  Any suggestions?

    Bill Piercy

    OK, great.  Thanks for the details.  I understand better now.

    First of all, I will turn off printer sharing on the host PC, if you do not use.  In addition, remove the instance of USB printer shared on your Mac if you do not use.

    Now, there are a few things we can do to improve the situation.

    -First of all, make sure that your router has the latest firmware.  Need help?

    -Second, after the firmware is updated, we will set an IP address of the printer:

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Range of your router is 192.168.0.100 a.199 we will use 192.168.0.200

    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Let the gateway and DNS white. Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

    Finally, we will restore the print on your Mac system:

    -Sys Prefs, Print & Fax
    -Right (Ctrl) click the box of the print queue and select Reset Printing System.
    -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

    OK, now, why don't use you the printer on the network with your computer and lose the USB connection?  The PC is connected to the D-Link?  If so, no matter if the PC is wired or wireless, it will have access to your printer.

  • OfficeJet Pro 8000 A809- and ePrint

    According to this document, my printer HP Officejet Pro 8000 A809-should support the apps mobile ePrint. To do this, however, it seems that the printer needs an e-mail address. I looked through the built-in Web server and cannot find anything on an e-mail address for the printer. (This printer does not have an interactive control / display.)

    Can someone tell me if the printer has an e-mail address, and how do I access it? Or is there another way to make it work with ePrint? Thank you!

    Hi, your printer is not capable ePrint has therefore not his own e-mail address. However, it is compatible with the application print ePrint mobile that does not require the pritner to have an e-mail address. When it is installed on a mobile device (smartphone or Tablet) the app should search for your printer to the printer and the device are on the same WiFi network. Here is a link where you can find more information about the print application mobile ePrint http://www8.hp.com/us/en/products/smart-phones-handhelds-calculators/mobile-apps/app_details.html?app=tcm:245 - 1220078 & platform = tcm:245 - 1220080

    Hope this information helps and after back with other questions.

  • Booklet printing? OfficeJet Pro 8000 A809

    Hello

    I have a MacBook Pro with Snow Leopard and a HP Officejet Pro 8000 A809. Duplex works. Is there a way to get the booklet pinting option?

    Kind regards

    David

    Sorry, we were not to get solved through Mac OS.

  • OfficeJet Pro 8000 wireless: OfficeJet Pro 8000 wireless does not respond after a certain time

    I use my wireless OfficeJet Pro 8000 for quite awhile now, but I have a problem that I can't solve:

    Initially, it works allright. But after a few hours, it seems to go to sleep. And it does not print jobs more. I have to put the printer 'off' and 'on '.  After that, it will print the work queue.

    I searched a timer as issues in the web interface of the printer, but can't find anything that points to a solution.

    The printer is connected wireless to my router, using a 'fixed' IP address

    Can someone help me, please?

    Thankx

    These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

    While the DHCP is convenient, devices like printers must always be assigned an IP (fixed) manually to avoid conflicts on your wireless network.

    1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).
    2. Or check in the printer "Auto off" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.
    3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
    4. If necessary and you have assigned a static IP address, try using auxiliary for the preferred DNS Server 8.8.8.8 and 8.8.4.4 as DNS server.
    5. Wireless printers work only on the 2.4 Ghz band.
    6. Make sure the printer is on the latest firmware by checking with the HP support site.
    7. Check all devices wireless in your home for interference. Check microwave, babyphones, phones, wireless and wireless alarm systems are a big culprit. Any of these will knock at your printer wireless intermittently.
    8. Make sure that your printer and router are at least 6 feet, independently of the other.

    In the router: (refer to the manual of your router for more information)

    1. Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try channel 1 first then the rest.
    2. Set the router to 20 Mhz only or 145Mbps router function.
    3. Always use WPA2-AES encryption (personal), but you can try the "mixed" mode
    4. Disable the WPS and never use it and disable the UPnP for the security of routers. No one can hijack your system now and help with wireless connectivity (if you want to know why, research on the web).
    5. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure the SSID is NOT identical, they must be different for all the bands, even for networks without comments.
    6. SSID broadcast should be enabled.
    7. Save all the settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.
    8. Marketing the printer and check that it reconnects to the router.

    Windows 7/8/8.1 is discovered the system on or off?

    1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
    2. Under home or work (current profile) / network discovery.
    3. Select "Turn on network discovery" and save the changes.

    Last resort effort - if your printer has an Ethernet connection, suggest you to get some adapters line and convert your Ethernet wiring for your printer.

  • OfficeJet Pro 8000 Wireless does not detect network

    My Officejet Pro 8000 Wireless suddenly doesn't work when connected via USB.  Don't try to re-run the HP Installation Wizard, the program reports no network detected (if the printer is right next to the Macbook Pro, which has a full signal from the network).  If I manually enter the SSID he says that he finds not only the network.  Network Configuration AMPe reports

    Network offline status

    802.11 wireless status disconnected

    Wireless on COLLAR

    Wireless works FAIL

    Network name (SSID reported no run)

    0 detected wireless networks

    The blue wireless light is turned on.

    Any suggestions?

    I appreciate the try, Dean, but again did not make a difference.

    I talked to tech support and they put me through presses the button to reset the network settings and then drain power printer, and I'm back in business.

  • OfficeJet Pro 8620: WiFi will not turn off

    Because of a problem with my modem compatible wireless (the problem being that its ethernet ports became defective), for awhile, I had turn the WiFi feature to provide Internet connectivity to my iMac.  Similarly, for the first time, I enabled WiFi on my HP Officejet Pro 8620 so I could keep a printing capability.

    Once my new modem arrived, I restored my complete ethernet network between the modem, my iMac (and other devices) and the Office jet printer 8620 Pro.  Everything works fine now!

    However, the printer Officejet Pro 8620 WiFi ability not shut down despite the operation by an ethernet cable and there is no WiFi from my modem.  I know the Officejet Pro 8620 always emits WiFi like my iPad and my iPhone indicate that it is.  As my wife is concerned about these RF transmissions that are on the other side of the wall adjacent to our bed, she asked me to turn off the Officejet Pro 8620 WiFi.  I've restored the "Default network" printer, but this is not the case.

    According to the instructions of the printer, 'Wireless does not work with an Ethernet cable connected to the printer' However this is clearly not there.  How can I solve this?

    Your WiFi is turned off.  Your wireless Direct is not off.  Disable wireless directly into the printer.   Info is in the User Guide.

  • HP Officejet 6500 a: printer will not connect to the wireless network.

    I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

    Anyone has any ideas that might help before chuck it and go and get a new one altogether?

    Thank you.

    Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

    If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

    If OK, go back and add WPA2-AES with your simple password.  Status now?

  • Printer will not connect via USB

    HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

    Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

    The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

    Hi Rmhodgson,

    Run the following utility below.

    http://support.HP.com/us-en/document/c02073861

  • HP Officejet Pro 8600 Plus does not connect through the Device Manager but will connect bij Win7.

    I have a HP Officejet Pro 8600 Plus that works very well with some computers connected via ethernet.

    On a new computer with Windows 7 Ultimate edition, HP Device Manager can't find the printer, even when I give IP address.

    When I try to add a new printer network in Windows (add printer) windows detects the printer less than a second.

    I need the hp Device Manager configuration so I can use all the options off the officejet.

    Problem solved.

    The printer has a fixed IP address and the customer got his IP by DHCP. By dhcp, dns suffix has been changed so the printer dns suffix and the client does not mach.

    Now the printer receives its IP address by the dhcp server. The dhcp server always gives the same address to the printer.

  • OfficeJet Pro 8600 Plus will not be printed

    I just bought a HP Officejet Pro 8600 Plus, and I've connected two PC and two iPads to it.  I also plugged on my Macbook Pro (iOS 10.6.8), but unlike four other devices, the Macbook will not print.

    The Macbook watch the installed printer, sends the print job, but nothing prints.  I reinstalled the printer, the driver updated and reset the system print, all nothing will do.   I know that the Macbook and printer can communicate because I can print a test page for the HP utility in the browser.

    You do not know this information helps, but I have observed in anticipation of eventually being removed from their own print jobs.  I also noticed that, strangely enough, a print job will appear in the queue, I try to print the levels of power, but I was not initialized it.

    What Miss me?

    (Btw, it's a wireless installation.  I read that others troubleshoot using a static address, but this isn't an option for me. My ISP router will not work with a static address.)

    After much research, I found someone else on this forum who has had the same problem and found a solution.  I post the link below in case someone comes on this post.

    http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/OfficeJet-Pro-8600-will-not-print-on-Mac-OSX-10-7-5/m-p/2307027/highlight/true#M80392

  • HP Officejet Pro 8600 N911a will not print from Windows 8.1

    I have a HP printer Officejet Pro 8600 N911a that returns the 72234 error code everytime I try to print a document from my Windows 8.1 desktop (HP 1520 t).

    Also, there is a single instance of error code 74899

    The same document prints fine on my Windows 7 Desktop and my Windows 7 Netbook.

    Firmware of the printer is: CLP1CN1416AR

    Firmware from the Support Page of the printer appears as: CLP1CN1322CR (2014-07-18)

    What should I do next to be able to print from my computer Windows 8.1.

    Steve

    Note: This is the first issue I had with this printer that was bought a year ago.

    Hello Steve, I hope you're well

    Thanks for getting back to me with your info!

    Yes, I would first of all, running the wizard of wireless configuration from the front panel of the printer (installation program, Menu, Assistant wireless network), make sure that the printer is connected to your network, then proceed to uninstall the printer, restart the PC and reinstall them both back on your computer.

    I hope that this is the solution!

    Have a great Monday!

Maybe you are looking for

  • the phone 7 and 7 more come in 64 GB?

    the phone 7 and 7 more come in 64 GB?

  • Speedy Pc Pro, claimed Microsoft Partner

    I have automatic Microsoft Updates and Security Essentials, most my Verizon email provider DOE is a free automatic security using the McAfee software scan. "" But a quick scan Pro of: software, system problems malware, performance issues, elements of

  • After that the race automatically updated the computer restores updates

    When I run updates all right until you are asked to reboot. It then install service packs, and then returns all changes automatically.

  • Error 0xc19a007

    I have a Photosmart C8180 All-in-One printer and my OS is Windows 7 64 bit. I get the ink system, cannot print failure error message. I tried to unplug the power cord from the printer and wait 60 seconds before it reconnected. I can still print it. I

  • Dell 11 5130 Pro place wake from sleep.

    Tried to solve this problem for weeks looking at various forums. No luck. I had to do a complete Windows from scratch reinstall because Windows refuses to load one day and my effort of recovery Dell USB disk do not have and I couldn't fix it otherwis