HP Officejet Pro 8100 - AirPrint - wireless

Similar Questions

• Re: HP officejet Pro 8100 will print from an Iphone, but not from my windows laptop

  My OfficeJet Pro 8100 print wireless to all laptops and tablets, but not of LENOVO Y530 my wife, under VISTA Home Premium, 64 bit OS.

  I've been on the LENOVO site and of course, it didn't help.  There seems to be little help here as well and I have been unable to determine what needs to be done or downloaded for this laptop.  Can provide you any assistance?

  Thank you

  Bob Lewis

  Hi @bugaloo and welcome to the Forums of HP!

  I see you are having problems printing from your Lenovo. I would like to help!

  Have you installed a software?

  I recommend to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• OfficeJet Pro 8100: Problem with airprint

  Our printer is officejet pro 8100. My iOS is 9.3.2 but not sure about the version of the printer. The first time we buy there worked with Apple airprint. Lately, we can't use airprint more which is very uncomfortable. EPrint still works well, however, we do not normally use it. We tried all possible solutions. The device can see the printer but when we choose the printer it disappears from the list. What should we do?

  Hello @Penny3425,

  Thanks for dropping by the HP's Support Forums! I see that you can not use AirPrint with your HP Officejet 8100. You are still able to use the ePrint feature.

  I would like that you start here: Wireless Printing with Apple's AirPrint

  Please see the 'No Printers Found Air' section and make sure that no troubleshooting steps were missed.

  This aid?  You are now able to use the AirPrint feature. I'll watch for your reply.

  Let me know the results. If this resolves the problem please let others know to mark this message as "accept as Solution".  Just say thank you, please click the ' Thumbs Up ' button. If you need more assistance let me know and I will gladly do whatever I can to help.

• Disable wireless on Officejet Pro 8100

  I have already set up my Officejet Pro 8100 as a wireless printer, but found the unreliable connection, so I went back to an installation of USB. I uninstalled the 8100 completely, amd reinstalled as a USB printer. It works fine, but I just noticed that on the 8100 wireless radio is turned on. Is it possible to disable it?

  Hello

  There is a symbol of the antenna next to the light on the Control Panel, press this button will become wireless power (#9):

  

  Kind regards.

• How to connect the Officejet Pro 8100 printer to wireless network

  Bought a "nine" Officejet Pro 8100 and want to use via my wireless network. The CD supplied with the printer is obsolete. Updated Apple software but can't see how to connect the printer to the network. Getting Started Guide is no help on this issue. Searched for support without result pages. Utility HP does not provide a method to set up a wireless feature. Find all the instructions, I say first of all make sure that the printer is connected to the wireless network, and that's what I can't find out how. What I forget?

  Finally, I called HP hotline for help and was rescued. It turns out that Apple's software update software includes all the required components. The software from the HP Web site is no longer available. It's frustrating to see the Getting Started Guide refer frequently to the HP installation wizard and be unable to locate it. Once the wizard tech took control of my computer and installed the necessary software, it was a breeze!

  I also note that compose the support number to talk with a guy was rather brief: between 1 and 2 minutes, I recall. Although there was a menu of the phone, it was not a large (unlike the attempt labyrinthine and often circular to locate the online help).

  Insofar as HP knows the necessary software in not available via software update or directly from HP, wouldn't make sense to inform buyers, as well as how to access? At least do not place meaningless, useless on the Web site links that lead into oblivion and frustration!

  Although I did appreciate the journey, I finally arrive at my destination. Thanks to Aris, HP technician. You are exceptional!

• OfficeJet Pro 8100 - new router - can't connect wireless

  Have an Officejet Pro 8100

  Has been configured on my home network for the USB connection or wireless printing before

  Old router has not installed this new router

  Cannot be configured for access through a new wireless router

  * When you run the installation of the printer asks to plug a USB cable - I plug in - then it passes to the ask for password wireless but then say errors

  "To configure the network settings for the selected device, please temporarily connect via USB. The device can be disconnected from the USB, once the network settings are transferred. »

  BUT the USB IS plugged

  Have tried completely uninstalling printer, software, drivers, etc and then make complete re-install-without success

  Router is an ASUS RT-N66U

  Wondering if there is a way to do a complete factory reset to clear the memory of the printers I've tried unplugging, wait 5 minutes and then plug it to a real reset without success complete.

  All of the suggestions that I am at a loss.

  Hi bketchy,

  This new router has two differnet built-in radio. You must ensure that you connect to the printer the correct SSID name for 2.4 GHZ radio. If you have both the 2.4 and 5.0 GHZ configured with the same SSID, you chnange the SSIP mame which should allow you to connect to the printer. Follow the steps outlined in the document below.

  Unable to connect to a wireless network

• More than a printer HP OfficeJet Pro 8100

  Hello

  I need to buy two printers wireless to use with an iPad.

  But the thing is: if I install TWO identical HP OfficeJet Pro 8100 under the same wifi network, how can I know that I want to print? In other words, my concern is that when I want to print a document using the iPad it will show two printers, but both with the name "HP OfficeJet Pro 8100". Having in mind that each printer is located away from each other in my house, I need to print under the right printer.

  Is it possible to change the name that appears on AirPrint so I can distinguish the two printers? Something like "Printer-Studio" and "printer-bedroom"? Or something that works somehow...

  Thank you.

  Pedrosacelso,

  It is possible to change the name of the printer, many customers buy more than one printer to a desktop environment and need to change the printer name to identify the printer.

  If you have problems with the above steps back on the support forums.

• HP Officejet pro 8100 cannot wifi access point?

  Yesterday, my HP Officejet pro 8100 arrived and I try to connect via wifi. I thought that it need access to infrastructure to print via wifi.

  When I turned on the printer I osserved that he create a stand-alone gateway with SSID: HP-Setup-7 a-Officejet Pro with IPv4 server address, etc...

  I was very happy and I printed a page with my smartphone samsung s4 directly connected printer access point (no wifi direct wifi except standard).

  Has been held today has changed, but I can't use printer with its own point of access, but only with an external wifi access point.

  Can someone help me, please? It could be a hardware problem?

  Thank you

  Luca

  P.S. to the webserver I checked 'connectivity point of access' (di accesso instradamento wireless in Italian Punto) is checked.

  Hello lucait

  You are right that the Hp Officejet PRo 8100 is a single function printer which does not directly optional wireless. You can always do what you want to do, but you will need a router to connect the printer to a network, and from there you can use the network routers or set up the feature ePrint for your portable devices.

  I hope this solves your post. Thanks again for the display on the HP Forums. It has been a pleasure. Have a great day!

• OfficeJet Pro 8100: Can not find the driver for the Officejet Pro 8100 online

  I've recently updated to Win10 (the free update, I do not know how many bits). I also then changed my wireless carrier. Now my laptop is not connecting to the new hub, and it seems that there is no driver more - so I don't know if these changes are the problem, or one of them.

  I tried to install a new driver and I first started the process, but the printer not print report pages, and then the laptop don't would not recognize the USB cable, even though it had been plugged in all the time. I tried to remove the cable and reinsert; also turning the printer market, but cela did not work.

  I also have Virgin and with them her reset the hub, but the hub still not connect to the printer.

  Now when I go to the page of drivers hp and it identifies my product, it then tells me there is no drivers for this printer now, and I should come back later in case they are developing.

  I can't believe that this is true. Can you please give me a link to a page where I can find and install the driver?

  May also explain why the cable USB is not recognized?

  Thank you.

  For your convinence: driver HP Officejet Pro 8100 that supports Windows 10

  Last updated driver, click on "Support" tab above and "drivers software &" or just google.

• HP Officejet Pro 8100: change the ssid

  I recently tried the Hotspot to unite AT & T.  That has worked very well but not decided to take it and went back to my Airport base station and the old service provider.  When I tried to connect my printer to my network - a printer works fine but the HP Officejet Pro 8100 will not change back the Name (SSID) the name for the old SSID hotspot network.  Since I was a new AirBook Pro I have to connect the cable to a USB port and then run the utility for my printer and select network.  It does not connect.  Any suggestions?

  Thanks for your suggestion. I tried this many times and it would be not just to reset the ssid. So after writing my post, I tried pressing the wireless button and the on/off switch at the same time. I went to try out some other combinations and print the configuration page. He changed the ssid for the correct name. Of course then I had to do what you described. Go to the printer utility with the cable connecting the computer and the printer and click on network. It has finally connected and I unplugged the cable between the computer and the printer. No problems now. Thanks for responding so quickly and hope it helps someone else.

• Change the SSID on a HP OfficeJet Pro 8100

  Hello world

  I've updated my router from WEP to WPA2 wireless and may not know how to upgrade the SSID on the OfficeJet Pro 8100.  I've updated my consoles of mobile games, televisions, thermostat etc to the new SSID and password.

  I don't have the installation CD.  I have the USB cable.  I run the HP 5.19.2 utility.

  When to connect the printer to the computer with the USB, I access the HP utility, click 'Network settings' to the program extracts information and provides the following error msg:

  "The task of network settings is not currently available.  Please make sure that the device is connected to a network. »

  Well, I know it is not connected to the network, I just need the screen to enter the new SSID and password.

  Other information that might be useful:

  Operating system: OS x Version 10.9.1

  Model: Officejet Pro 8100 N811a

  Service ID: 23267

  FW version: TSP1FN1148IR

  Driver version: HP inkjet 3 pilot 3.3.3

  Thanks in advance for any help you can provide.

  How I finally got to work on a Mac running 10.9:

  1 connected via USB to a Mac

  2. system preferences > Print & Fax > search for the printer in the list on the left > use the button + to add the printer if it is not there

  3. install an ethernet cable from the printer to the Mac even

  4. with the printer selected in system preferences, click Options & supplies

  5. click on the utility tab at the top

  6. click the button Open Printer Utility

  7. all the settings > network settings > Hello parameters

  8 select Hello if it is not enabled, click the URL next to your device to the URL address to access:

  9. to the web page for the URL, click on the network tab

  10. click on wireless configuration wizard, click OK, ignore SSL warnings, enter your printer admin password if you set one

  11 to run the Wireless Setup Wizard

• HP Officejet Pro 8100: HP Officejet 8100 N811a - network connection is not possible

  Hello community,

  I have a pretty standard network with 3 points of access, WPA - PSK authentication, TKIP/AES encryption, running on channels 1-11. I made the MAC filtering is off and DHCP is on.

  The printer connects to the network, or via the software of HP Doc or the EWS settings.

  It's however possible to connect the city nearby networks so I must be overlooking something.

  After that under the HP Doc and he's trying to set up the printer I just get an exemption from the unknown error.

  The printer prints fine when connected by cable.

  The Network Configuration after the eroor HP Doc said

  Wireless on : Pass
  Wireless Working : Pass
  
  Connected : Not Run
  
  Network Name Found : Pass
  
  Printer Settings Consistent : Not Run
  No Filtering : Not Run
  Channel : Not Run
  Security : FAIL
  
  And in the Configuration it lists the SSID but IP Adress states : not applicable
  

  Ideas?

  Hi @NK10,

  Welcome to the Forums of HP Support!

  I see that you are unable to connect wirelessly with your HP Officejet Pro 8100 printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you mentioned that you have "3 APs, authentication WPA - PSK, AES/TKIP encryption, running on channels 1-11 I made sure MAC filtering is off and DHCP is on. »

  First, I'll assume means AP access point.

  • WPA2-PSK (TKIP) WPA2-PSK (AES) and WPA2-PSK (TKIP/AES) are all different encryption options. Which one do you use?
  • Do not use more than one type of encryption at the same time, what access points help.
  • The router is connected to one channel at a time, not 1 to 11. What channel are you on?
  • DHCP should only be enabled on the router and disabled on each access point.

  Looks like the access points are configured incorrectly. They should have the same type of encryption and be on the same channel as the router. If the printer works well on the wired connection the wireless network configuration is causing a conflict.

  Tips for a successful wireless connection:

  • Using a unique network name (SSID).
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch?
  • Do not use a network of comments (SSID).
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • Update the firmware on the router.

  For troubleshooting purposes, follow these steps:

  1. Disable all access points.
  2. Connect the printer to the router wirelessly.
  3. Test print.

  If the printer works fine wireless connected access points, you must reconfigure the access points correctly. HP does not support the networks with access point, additional router or switch, etc. The complexity of the configuration.

  For more information, see print wireless Center.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet Pro 8100 does not recognize the new router

  I saw this question for other printers, so I hope that there is a response to mine.  I just upgraded the speed of my internet service which involved a new router.  We made sure all the computers in the House worked with her, but I forgot to try the printer before the technician left.  Now my computer thinks printer Officejet Pro 8100 is offline (turned off) and the blue light on the printer blinks.  How can I get the printer to recognize the new router?  I guess I have to add that I do not know where to find the code of the intellectual property that is asked for when I go to the start menu, the HP folder, select my printer, etc.  He said: push the button on my printer wireless, so I push button blue flashing light but that does not produce a number.  Help appreciated!    It's an ATT router and I have the WiFi network name and wireless password.

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• HP officejet pro 8100: hp officejet pro 8100

  I would like to connect 2 computers to the 1 officejet pro 8100. a computer uses Windows 7 as the operating system and the other computer is using LINUX. I have the Dell laptop using windows and is connected to the wireless printer and works great. I want to connect it to the computer of the INLAND ECDIS with LINUX using the USB connection. The ECDIS system is a stand-alone system that can be connected to a wireless or Internet System. (according to the guidelines of the USCG and the right international). I expected to get help from hp, but that was not possible. I hope that this forum will help. Thank you.

  Hi @Sailor_Bob,

  The printer is able to be connected wireless to several machines and USB to a computer at the same time.

  I mentioned in my previous post "as long as HP has a suitable driver for your version of Linux, it should work fine."

  This Linux machine running FURUNO is not in the list of supported operating systems, this is why you are having problems.

  Hope that answers your question. Thank you for posting!

• HP Utlilty for Officejet Pro 8100

  I have a desktop Mac with the latest V10.9 OS. I bought an Officejet Pro 8100. It came with a CD with the HP software. When I put the disc in to read, he was rejected because he needed OS 10.7 V. I'm on the line has downloaded and installed the driver. It prints with the USB cable. When I'm gone to use the wireless feature the printer did not find my network (all other computers-ipads-phones work very well). The instructions to set up wireless said that the I need to go in the HP folder in applications and run the HP utility.  There is no file HP. I can't find the HP utility in HP web site. How to fix my printer to go wireless.

  Thank you

  Hello

  As a complete software functionality is not currently available to 10.9, it is impossible to set up the connection through the HP software.

  Temporarily connect the Paul to your Mac with an Ethernet cable.

  Open Safari and then open the menu Hello

  Note: If it is not displayed, click Safary > preferences. Open the Advanced tab and failure of the box next the two options bodice and click OK.

  Hello a click in the main menu, open the printer EWS by double clicking on the name of the printer.

  Open the network tab, under wireless, follow the Wireless Setup Wizard and follow the steps to connect to your network.

  Once you disconnect the Ethernet cable, go to Printers & Scanners and add the printer by clicking on the sign more.

  Kind regards

  Shlomi