HP Officejet Pro 8100: Get a copy of the driver inf or dpg file

Similar Questions

• OfficeJet Pro 8600 Premium: When copying from the plateau the copier will print only 1/8 of page, then stop.

  Copier is towards the top sometimes & don't print that page of bucket 1/8, Athens he spits as if this one ends. Have unplugged the power cord & reconnected. Ran scans printhead & alignment. Off all night. All the ink levels are good. Still has not corrected it.

  Print an entire page of the screen of the computer without problem. Printing problem just go flat.

  Hi @Wendy-needshelp,.

  Thanks for joining the Forums of HP Support for a solution to your problem copying.

  I understand that you use a HP Officejet Pro 8600 Premium e-all-in-one with a computer and Windows 7 when you copy from sometimes flat it will only copy and print 1/8 of the page. I would like to help.

  You mentioned having unplugged and replugged the power cord. This is something that could be done. If you can, I reset the power and try to connect the printer directly to a wall outlet, if you currently use a protector or electrical surge extention. Sometimes the surge protectors can limit the amout of the power supplied to the printer.

  

  There was an update firmware released in April, which can help your printer. You can download the update of the firmware and run it from your computer to install it on the printer. You can go to the HP Officejet Pro 8600 N911g_n Firmware download page by clicking here.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• OfficeJet Pro 8600 more: officejet pro 8600 more impossible to install the driver

  I have been having problems printing of PDF files - they would print with black boxes in the portions of them that do not appear on the screen.  I confirmed that I had the latest version of Adobe Reader.  So I tried to update my drivers for the printer.  The HP site suggested that I have installed a new driver package.  It kept failing install.  The error was:

  2081883401: failed to uninstall the device with the serial number XXXXXXXX (serial number removed)

  I tried manually uninstall the printer first, but that doesn't seem to make a difference.

  Now, the printer is not yet shown and I can't install it.

  How can I get my work and the back of the printer?

  Hi @OHRassi,

  This is great news to hear that have been able to understand what was causing the black boxes. I will keep that counts where I encountered this problem in the future.

  If woul you like to help others who may have the same problem find your easier solutuion, please click the "accept as Solution" and the "thumbs up" buttons down below in this message.

  Thank you!

• HP officejet pro 8600 more - error 1627 on the driver installation failed.

  What is the solution to this problem? (I uninstalled the old driver, worked my way through the HP help out 3 times without success and used microsoft fixit 2 times, all to no result and great frustration!)

  Operating system is windows 7 Home premium 64-bit

  I finally solved this problem!

  Had to close the factory reset - takes a lot of time on the backup of all files, do factory reset, reinstall all files and all additional software, but eventually set problem, the printer works now.

• HP Officejet Pro 8100: change the ssid

  I recently tried the Hotspot to unite AT & T.  That has worked very well but not decided to take it and went back to my Airport base station and the old service provider.  When I tried to connect my printer to my network - a printer works fine but the HP Officejet Pro 8100 will not change back the Name (SSID) the name for the old SSID hotspot network.  Since I was a new AirBook Pro I have to connect the cable to a USB port and then run the utility for my printer and select network.  It does not connect.  Any suggestions?

  Thanks for your suggestion. I tried this many times and it would be not just to reset the ssid. So after writing my post, I tried pressing the wireless button and the on/off switch at the same time. I went to try out some other combinations and print the configuration page. He changed the ssid for the correct name. Of course then I had to do what you described. Go to the printer utility with the cable connecting the computer and the printer and click on network. It has finally connected and I unplugged the cable between the computer and the printer. No problems now. Thanks for responding so quickly and hope it helps someone else.

• OfficeJet Pro 8100 inoperative Sofware

  My new 8100 in Officejet Pro is installed on 3 of my computers in the House.  One of the icons displays a black printer and is called "HP Officejet Pro 8100".  On one of the computers that this icon opens up a window titled "HP printer Assistant".  On two computers this icon will not open.

  How can I correct this situation?

  Hello

  Althouth the scenario is a little different, I think that the next patch or the manual solution below can help to solve the problem:

  http://support.HP.com/us-en/document/c03640384

  Please let me know if this is useful,

  Shlomi

• Copy and scan with the Officejet Pro 8100

  Can I scan and copy with the Officejet pro 8100?   If Yes, how, is not in the manual.

  LON

  The Officejet Pro 8100 is a printer only, it is not a multifunction device.

  You can find the specifications below:

  http://WWW8.HP.com/us/en/products/printers/product-detail.html?OID=4323241&JumpID=oc_r1002_usen_c-001_r0002

• OfficeJet pro 8100: run dll error message

  used to have officejet pro 8100. It has developed a problem. has been told by hp don't have service location so that it sets, had to buy a new printer. did you uninstall to remove the system of 8100. everything seems to be ok. did the installation for the new printer, officejet pro 6830, and it seems to work well.  now the problem... whenever I restart my computer, I get this error message. How to stop?   "Error loading C:\folder\folder\HP OFFICEJET PRO 8100\bin\HPStatusBL.dll" HOW DO I GET THIS TO STOP?

  Hi @bigkahuna404,

  Welcome to the HP Forums!

  I see that you get a runtime error message with your old printer HP Officejet 8100, after uninstalling the software. I'm happy to help you!

  First of all, I would suggest trying the fix it MS, program by Microsoft. If this does not work, you will need to manually remove/disable the item from your startup programs. How to disable Vista and in Windows 7 startup programs.

  Hope this information helps and have a nice day!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP Officejet Pro 8600 won't copy

  My new HP Officejet Pro 8600 will not copy.  When I hit print I get an error "scanner failure".

  I called the HP support by phone as suggested, and they had me unplug the printer, then hold the power button in during 15 seconds, everything disconnected in order to "drain the power."  Once I have it plugged it back in and he began to copy correctly turned on!  Hope this helps someone else with the same question.

• OfficeJet Pro 8100: Lost my printer drivers (after a Windows 10 update)!

  Hello

  After the recent Windows 10 updates (one installed on Christmas day), I lost my (custom installed) to the printer drivers. No big deal I thought, ONLY MIcrosoft MOST inconvienience - I'll reinstall just them. But when I open the properties of the printer Panel, I found that ALL ADVANCED TAB where I needed access to reinstall drivers is now GRAY and completely unaccessable! I not only lost my custom drivers, I also lost my second tray of the printer (installed optionally) capacity! YES, MERRY CHRISTMAS!

  Now I need help to reinstall (they gave me specific instructions for installation, so I won't bumble worse trying to install them differently (as a regular driver) without confirmation first.)
  This is a PERFECT EXAMPLE of why we should be allowed to choose for outselves when and what updates to install on OUR computer! I checked the Windows Update history and there is NOTHING there that would strike even he would have had to change printer drivers, nor I anthing that would affect them being changed (for example, allowing control HP from my PC to automatically updated drivers), but clearly something changted them.

  What I HAD... I use a printer Officejet Pro 8100 bought two years ago February next with the option second tray of the installed printer. I also use Officejet 8600 drivers in order to be able to print my graphic files properly (these drivers were recommended on this forum once I have posted having problems printing after the first installation. These drivers worked PERFECTLY in all of my PC (running Windows XP, 8.1, and 10), but now with the missing options, everytting is printing through the upper status bar (where I have a THICK paper). I don't have the ability to choose which try to print (Tray 1 or 2), and I need to change paper whenever I want to print on different paper (I always had a THICK paper on top (Tray 1) and plain paper in the lower part (tray 2) because it would not print thick paper from the tray at the bottom.

  To use the 8600 drivers, I was given specific instructions (on this forum) on install in the section "NEW DRIVER" of the ADVANCED TAB in the properties of the printer. Now that I don't have access to this tab, I need to know if there is a way to access new (my preferred method) OR another way to install (for example just install them as if I would install the printer (8600))?

  It's free enough explainatory tab FULL area is GRAYED OUT, but in case there are any doubts, I have attached is a screenshot showing what he looks like.

  I apprecate any help you could offer.

  Kind regards... Chugbug

  

  OK, now it's really WEID!

  I tried during the last 24 hours to get to the Panel in question, including the restart of Windows at least half a dozen times without success.  But now tonight after that I dug around the different tabs, once again, INCLUDING clicking on through security and permissions panels (but not to make changes) AND for posting my question here, all in the advanced Panel was suddenly accessible once more!

  I reinstalled my 8600 drivers again, then reset my printing (default) preferences (paper 2 / plain plateau), and everything is good again (kumbaya...)!

  Good thing, I took a screenshot of it (grey) or I can't believe myself!

  Happy holidays!  Chugbug

  Screenshot showing access with my 8600 drivers installed:

  

• HP officejet Pro 8100 printer tray

  I have a printer HP Officejet Pro 8100. I removed the tray paper this morning to load the paper, and now I can't seem to slip in all the way. It stops at about 4 inches short of closing.  I feel like a fool! How can I get in trouble by dragging a drawer in?  Are there clips etc I should have in place, etc., that may have to be turned off?

  Hello

  You could try to raise the front of the printer to see if something done obstacle from your desktop.  It should slide right in.

• HP Officejet Pro 8100: HP Officejet 8100 N811a - network connection is not possible

  Hello community,

  I have a pretty standard network with 3 points of access, WPA - PSK authentication, TKIP/AES encryption, running on channels 1-11. I made the MAC filtering is off and DHCP is on.

  The printer connects to the network, or via the software of HP Doc or the EWS settings.

  It's however possible to connect the city nearby networks so I must be overlooking something.

  After that under the HP Doc and he's trying to set up the printer I just get an exemption from the unknown error.

  The printer prints fine when connected by cable.

  The Network Configuration after the eroor HP Doc said

  Wireless on : Pass
  Wireless Working : Pass
  
  Connected : Not Run
  
  Network Name Found : Pass
  
  Printer Settings Consistent : Not Run
  No Filtering : Not Run
  Channel : Not Run
  Security : FAIL
  
  And in the Configuration it lists the SSID but IP Adress states : not applicable
  

  Ideas?

  Hi @NK10,

  Welcome to the Forums of HP Support!

  I see that you are unable to connect wirelessly with your HP Officejet Pro 8100 printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you mentioned that you have "3 APs, authentication WPA - PSK, AES/TKIP encryption, running on channels 1-11 I made sure MAC filtering is off and DHCP is on. »

  First, I'll assume means AP access point.

  • WPA2-PSK (TKIP) WPA2-PSK (AES) and WPA2-PSK (TKIP/AES) are all different encryption options. Which one do you use?
  • Do not use more than one type of encryption at the same time, what access points help.
  • The router is connected to one channel at a time, not 1 to 11. What channel are you on?
  • DHCP should only be enabled on the router and disabled on each access point.

  Looks like the access points are configured incorrectly. They should have the same type of encryption and be on the same channel as the router. If the printer works well on the wired connection the wireless network configuration is causing a conflict.

  Tips for a successful wireless connection:

  • Using a unique network name (SSID).
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch?
  • Do not use a network of comments (SSID).
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • Update the firmware on the router.

  For troubleshooting purposes, follow these steps:

  1. Disable all access points.
  2. Connect the printer to the router wirelessly.
  3. Test print.

  If the printer works fine wireless connected access points, you must reconfigure the access points correctly. HP does not support the networks with access point, additional router or switch, etc. The complexity of the configuration.

  For more information, see print wireless Center.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet Pro 8100: install officejet pro8100

  I try to install the software for this printer on a Vista Home Premium 64 bit computer.  The installation fails saying it cannot install the file HPDiscoPM5B12.DLL.  It sends the error to HP, but comes up saying that it does not find a solution.  No idea how to get the full software installation package?

  ERROR MESSAGE:

  3 = CopyFile (CBC: c8100\Bin\\HPDiscoPM5B12.DLL Files\HP\HP\HPOfficejt Pro rogram Dst: c:\Windows\system32\HPDiscoPM5B12.DLL)

  Thank you!

  Chuck

  This printer is a HP replacement for a Pro Offcejet 8000 defective.  I have the DVD of the old printer and he ran with it.  Apparntly, he had the OfficeJet Pro 8100 on it software and installed it without any error message.  So far, it seems to work well.  I have to think that there is something wrong with the 8100 to the HP Web site software.

• OfficeJet Pro 8100 does not recognize the new router

  I saw this question for other printers, so I hope that there is a response to mine.  I just upgraded the speed of my internet service which involved a new router.  We made sure all the computers in the House worked with her, but I forgot to try the printer before the technician left.  Now my computer thinks printer Officejet Pro 8100 is offline (turned off) and the blue light on the printer blinks.  How can I get the printer to recognize the new router?  I guess I have to add that I do not know where to find the code of the intellectual property that is asked for when I go to the start menu, the HP folder, select my printer, etc.  He said: push the button on my printer wireless, so I push button blue flashing light but that does not produce a number.  Help appreciated!    It's an ATT router and I have the WiFi network name and wireless password.

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• OfficeJet Pro 8100: Officejet Pro 8100 won't print color after update software on Mac

  I have a MacBook Air with OS X (Yosemite 10.10.3)-.

  When I connect the printer via USB, I was able to print by using the generic drivers on the machine. However, as expected, update software detected an update for HP drivers - I installed.

  And now the printer does not print in color. I checked every setting I can think, but it is still printing in black and white.

  Any help would be appreciated!

  Welcome to the @mandikayencforum!

  I have read your current position and the previous thread on how you were not and are not able to print in color from your Mac running 10.10. I saw that already test pages were color printing and would like to know if the test always pages print in color. If they do, a matter for the Mac somewhere, and I have some suggestions for you to do below. If the test pages no longer print in color, please let me know! If the printer is not printing in color when you print test pages, there is probably a problem of cartridge or printer hardware problem.

  1. follow the same steps of @Waterboy71 on your other thread here to reset the permissions system disk and repair of printing: Re: Officejet Pro 8100 refuses to print color (OS X 10.9)

  2. If you still do not have the ability to select the color printing on your Mac, try the procedure described in this post from wisgirl64: Re: won't print in color from my Mac or iPhoto for HP photosmart D110

  If you find that the color print test pages, and the Mac does not give you the options to choose color printing, I suggest getting in touch with Apple support experts to see if they can help fix the problem of the OS X.

  • Apple support communities

  If you like my answer to you today, click the thumbs up below!

  Happy Friday!